USB_Host_Shield_2.0/Usb.h

/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.

This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").

Contact information
-------------------

Circuits At Home, LTD
Web      :  http://www.circuitsathome.com
e-mail   :  support@circuitsathome.com
 */
/* USB functions */
#ifndef _usb_h_
#define _usb_h_

//#define BOARD_BLACK_WIDDOW

#define USB_METHODS_INLINE

#include <inttypes.h>

#include <assert.h>

#include "avrpins.h"
#include "max3421e.h"
#include "usbhost.h"
#include "usb_ch9.h"
#include "address.h"

#if defined(ARDUINO) && ARDUINO >=100
#include "Arduino.h"
#else
#include <WProgram.h>
#endif
#include "message.h"

/* shield pins. First parameter - SS pin, second parameter - INT pin */

#ifdef BOARD_BLACK_WIDDOW
typedef MAX3421e<P6, P3> MAX3421E; // Black Widow
#else
typedef MAX3421e<P10, P9> MAX3421E; // Official Arduinos (UNO, Duemilanove, Mega, 2560
#endif

//Debug macros. In 1.0 it is possible to move strings to PROGMEM by defining USBTRACE (Serial.print(F(s)))
#define USBTRACE(s) (Notify(PSTR(s), 0x80))
#define USBTRACE2(s,r) (Notify(PSTR(s), 0x80), PrintHex((r), 0x80), Notify(PSTR("\r\n"), 0x80))



/* Common setup data constant combinations  */
#define bmREQ_GET_DESCR     USB_SETUP_DEVICE_TO_HOST|USB_SETUP_TYPE_STANDARD|USB_SETUP_RECIPIENT_DEVICE     //get descriptor request type
#define bmREQ_SET           USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_STANDARD|USB_SETUP_RECIPIENT_DEVICE     //set request type for all but 'set feature' and 'set interface'
#define bmREQ_CL_GET_INTF   USB_SETUP_DEVICE_TO_HOST|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_INTERFACE     //get interface request type

// D7		data transfer direction (0 - host-to-device, 1 - device-to-host)
// D6-5		Type (0- standard, 1 - class, 2 - vendor, 3 - reserved)
// D4-0		Recipient (0 - device, 1 - interface, 2 - endpoint, 3 - other, 4..31 - reserved)

// USB Device Classes
#define USB_CLASS_USE_CLASS_INFO	0x00	// Use Class Info in the Interface Descriptors
#define USB_CLASS_AUDIO			0x01	// Audio
#define USB_CLASS_COM_AND_CDC_CTRL	0x02	// Communications and CDC Control
#define USB_CLASS_HID			0x03	// HID
#define USB_CLASS_PHYSICAL		0x05	// Physical
#define USB_CLASS_IMAGE			0x06	// Image
#define USB_CLASS_PRINTER		0x07	// Printer
#define USB_CLASS_MASS_STORAGE		0x08	// Mass Storage
#define USB_CLASS_HUB			0x09	// Hub
#define USB_CLASS_CDC_DATA		0x0a	// CDC-Data
#define USB_CLASS_SMART_CARD		0x0b	// Smart-Card
#define USB_CLASS_CONTENT_SECURITY	0x0d	// Content Security
#define USB_CLASS_VIDEO			0x0e	// Video
#define USB_CLASS_PERSONAL_HEALTH	0x0f	// Personal Healthcare
#define USB_CLASS_DIAGNOSTIC_DEVICE	0xdc	// Diagnostic Device
#define USB_CLASS_WIRELESS_CTRL		0xe0	// Wireless Controller
#define USB_CLASS_MISC			0xef	// Miscellaneous
#define USB_CLASS_APP_SPECIFIC		0xfe	// Application Specific
#define USB_CLASS_VENDOR_SPECIFIC	0xff	// Vendor Specific

// Additional Error Codes
#define USB_DEV_CONFIG_ERROR_DEVICE_NOT_SUPPORTED	0xD1
#define USB_DEV_CONFIG_ERROR_DEVICE_INIT_INCOMPLETE	0xD2
#define USB_ERROR_UNABLE_TO_REGISTER_DEVICE_CLASS	0xD3
#define USB_ERROR_OUT_OF_ADDRESS_SPACE_IN_POOL		0xD4
#define USB_ERROR_HUB_ADDRESS_OVERFLOW			0xD5
#define USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL		0xD6
#define USB_ERROR_EPINFO_IS_NULL			0xD7
#define USB_ERROR_INVALID_ARGUMENT			0xD8
#define USB_ERROR_CLASS_INSTANCE_ALREADY_IN_USE		0xD9
#define USB_ERROR_INVALID_MAX_PKT_SIZE			0xDA
#define USB_ERROR_EP_NOT_FOUND_IN_TBL			0xDB
#define USB_ERROR_TRANSFER_TIMEOUT			0xFF

class USBDeviceConfig {
public:
        virtual uint8_t Init(uint8_t parent, uint8_t port, bool lowspeed) = 0;
        virtual uint8_t Release() = 0;
        virtual uint8_t Poll() = 0;
        virtual uint8_t GetAddress() = 0;
};

#define USB_XFER_TIMEOUT	5000    //USB transfer timeout in milliseconds, per section 9.2.6.1 of USB 2.0 spec
//#define USB_NAK_LIMIT		32000   //NAK limit for a transfer. 0 means NAKs are not counted
#define USB_RETRY_LIMIT		3       //retry limit for a transfer
#define USB_SETTLE_DELAY	200     //settle delay in milliseconds

#define USB_NUMDEVICES		16	//number of USB devices
//#define HUB_MAX_HUBS		7	// maximum number of hubs that can be attached to the host controller
#define HUB_PORT_RESET_DELAY	20	// hub port reset delay 10 ms recomended, can be up to 20 ms

/* USB state machine states */
#define USB_STATE_MASK                                      0xf0

#define USB_STATE_DETACHED                                  0x10
#define USB_DETACHED_SUBSTATE_INITIALIZE                    0x11
#define USB_DETACHED_SUBSTATE_WAIT_FOR_DEVICE               0x12
#define USB_DETACHED_SUBSTATE_ILLEGAL                       0x13
#define USB_ATTACHED_SUBSTATE_SETTLE                        0x20
#define USB_ATTACHED_SUBSTATE_RESET_DEVICE                  0x30
#define USB_ATTACHED_SUBSTATE_WAIT_RESET_COMPLETE           0x40
#define USB_ATTACHED_SUBSTATE_WAIT_SOF                      0x50
#define USB_ATTACHED_SUBSTATE_GET_DEVICE_DESCRIPTOR_SIZE    0x60
#define USB_STATE_ADDRESSING                                0x70
#define USB_STATE_CONFIGURING                               0x80
#define USB_STATE_RUNNING                                   0x90
#define USB_STATE_ERROR                                     0xa0

/* USB Setup Packet Structure   */
typedef struct {

        union { // offset   description
                uint8_t bmRequestType; //   0      Bit-map of request type

                struct {
                        uint8_t recipient : 5; //          Recipient of the request
                        uint8_t type : 2; //          Type of request
                        uint8_t direction : 1; //          Direction of data X-fer
                } __attribute__((packed));
        } ReqType_u;
        uint8_t bRequest; //   1      Request

        union {
                uint16_t wValue; //   2      Depends on bRequest

                struct {
                        uint8_t wValueLo;
                        uint8_t wValueHi;
                } __attribute__((packed));
        } wVal_u;
        uint16_t wIndex; //   4      Depends on bRequest
        uint16_t wLength; //   6      Depends on bRequest
} SETUP_PKT, *PSETUP_PKT __attribute__((packed));



// Base class for incomming data parser

class USBReadParser {
public:
        virtual void Parse(const uint16_t len, const uint8_t *pbuf, const uint16_t &offset) = 0;
};

class USB : public MAX3421E {
        AddressPoolImpl<USB_NUMDEVICES> addrPool;
        USBDeviceConfig* devConfig[USB_NUMDEVICES];
        uint8_t devConfigIndex;
        uint8_t bmHubPre;

public:
        USB(void);

        void SetHubPreMask() {
                bmHubPre |= bmHUBPRE;
        };

        void ResetHubPreMask() {
                bmHubPre &= (~bmHUBPRE);
        };

        AddressPool& GetAddressPool() {
                return(AddressPool&) addrPool;
        };

        uint8_t RegisterDeviceClass(USBDeviceConfig *pdev) {
                for(uint8_t i = 0; i < USB_NUMDEVICES; i++) {
                        if(!devConfig[i]) {
                                devConfig[i] = pdev;
                                return 0;
                        }
                }
                return USB_ERROR_UNABLE_TO_REGISTER_DEVICE_CLASS;
        };

        void ForEachUsbDevice(UsbDeviceHandleFunc pfunc) {
                addrPool.ForEachUsbDevice(pfunc);
        };
        uint8_t getUsbTaskState(void);
        void setUsbTaskState(uint8_t state);

        EpInfo* getEpInfoEntry(uint8_t addr, uint8_t ep);
        uint8_t setEpInfoEntry(uint8_t addr, uint8_t epcount, EpInfo* eprecord_ptr);

        //uint8_t ctrlReq( uint8_t addr, uint8_t ep, uint8_t bmReqType, uint8_t bRequest, uint8_t wValLo, uint8_t wValHi, uint16_t wInd, uint16_t nbytes, uint8_t* dataptr);

        /* Control requests */
        uint8_t getDevDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* dataptr);
        uint8_t getConfDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t conf, uint8_t* dataptr);

        uint8_t getConfDescr(uint8_t addr, uint8_t ep, uint8_t conf, USBReadParser *p);

        uint8_t getStrDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t index, uint16_t langid, uint8_t* dataptr);
        uint8_t setAddr(uint8_t oldaddr, uint8_t ep, uint8_t newaddr);
        uint8_t setConf(uint8_t addr, uint8_t ep, uint8_t conf_value);
        /**/
        uint8_t ctrlData(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* dataptr, boolean direction);
        uint8_t ctrlStatus(uint8_t ep, boolean direction, uint16_t nak_limit);
        uint8_t inTransfer(uint8_t addr, uint8_t ep, uint16_t *nbytesptr, uint8_t* data);
        uint8_t outTransfer(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* data);
        uint8_t dispatchPkt(uint8_t token, uint8_t ep, uint16_t nak_limit);

        void Task(void);

        uint8_t DefaultAddressing(uint8_t parent, uint8_t port, bool lowspeed);
        uint8_t Configuring(uint8_t parent, uint8_t port, bool lowspeed);
        uint8_t ReleaseDevice(uint8_t addr);

        uint8_t ctrlReq(uint8_t addr, uint8_t ep, uint8_t bmReqType, uint8_t bRequest, uint8_t wValLo, uint8_t wValHi,
                uint16_t wInd, uint16_t total, uint16_t nbytes, uint8_t* dataptr, USBReadParser *p);

private:
        void init();
        uint8_t SetAddress(uint8_t addr, uint8_t ep, EpInfo **ppep, uint16_t &nak_limit);
        uint8_t OutTransfer(EpInfo *pep, uint16_t nak_limit, uint16_t nbytes, uint8_t *data);
        uint8_t InTransfer(EpInfo *pep, uint16_t nak_limit, uint16_t *nbytesptr, uint8_t *data);
};

#if 0 //defined(USB_METHODS_INLINE)
//get device descriptor

inline uint8_t USB::getDevDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* dataptr) {
        return( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, 0x00, USB_DESCRIPTOR_DEVICE, 0x0000, nbytes, dataptr));
}
//get configuration descriptor

inline uint8_t USB::getConfDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t conf, uint8_t* dataptr) {
        return( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, conf, USB_DESCRIPTOR_CONFIGURATION, 0x0000, nbytes, dataptr));
}
//get string descriptor

inline uint8_t USB::getStrDescr(uint8_t addr, uint8_t ep, uint16_t nuint8_ts, uint8_t index, uint16_t langid, uint8_t* dataptr) {
        return( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, index, USB_DESCRIPTOR_STRING, langid, nuint8_ts, dataptr));
}
//set address

inline uint8_t USB::setAddr(uint8_t oldaddr, uint8_t ep, uint8_t newaddr) {
        return( ctrlReq(oldaddr, ep, bmREQ_SET, USB_REQUEST_SET_ADDRESS, newaddr, 0x00, 0x0000, 0x0000, NULL));
}
//set configuration

inline uint8_t USB::setConf(uint8_t addr, uint8_t ep, uint8_t conf_value) {
        return( ctrlReq(addr, ep, bmREQ_SET, USB_REQUEST_SET_CONFIGURATION, conf_value, 0x00, 0x0000, 0x0000, NULL));
}

#endif // defined(USB_METHODS_INLINE)

#endif //_usb_h_