USB_Host_Shield_2.0/WiiCameraReadme.md

Please see <http://wiibrew.org/wiki/Wiimote#IR_Camera> for the complete capabilities of the Wii camera. The IR camera code was written based on the above website and with support from Kristian Lauszus.

This library is large, if you run into memory problems when uploading to the Arduino, disable serial debugging.

To enable the IR camera code, simply set ```ENABLE_WII_IR_CAMERA``` to 1 in [settings.h](settings.h).

This library implements the following settings:

* Report sensitivity mode: 00 00 00 00 00 00 90 00 41	 40 00	 Suggested by inio (high sensitivity)
* Data Format: Extended mode (0x03).  Full mode is not working yet. The output reports 0x3e and 0x3f need tampering with
	* In this mode the camera outputs x and y coordinates and a size dimension for the 4 brightest points.

Again, read through <http://wiibrew.org/wiki/Wiimote#IR_Camera> to get an understanding of the camera and its settings.
Added support for the IR Camera inside the Wiimote Thanks to Allan Glover: https://github.com/Engr-AllanG 2013-01-17 00:07:56 +01:00			`Please see <http://wiibrew.org/wiki/Wiimote#IR_Camera> for the complete capabilities of the Wii camera. The IR camera code was written based on the above website and with support from Kristian Lauszus.`

Updated comment about how to activate serial debugging 2013-11-11 11:48:09 +01:00			`This library is large, if you run into memory problems when uploading to the Arduino, disable serial debugging.`
Added support for the IR Camera inside the Wiimote Thanks to Allan Glover: https://github.com/Engr-AllanG 2013-01-17 00:07:56 +01:00
Code for the Wii IR camera needs to be activated in settings.h now Also cleaned up README.md a bit 2013-12-30 16:19:34 +01:00			To enable the IR camera code, simply set ```ENABLE_WII_IR_CAMERA``` to 1 in [settings.h](settings.h).
Added support for the IR Camera inside the Wiimote Thanks to Allan Glover: https://github.com/Engr-AllanG 2013-01-17 00:07:56 +01:00
Fixed some markdown issues 2013-04-01 22:45:45 +02:00			`This library implements the following settings:`
Added support for the IR Camera inside the Wiimote Thanks to Allan Glover: https://github.com/Engr-AllanG 2013-01-17 00:07:56 +01:00
			`* Report sensitivity mode: 00 00 00 00 00 00 90 00 41 40 00 Suggested by inio (high sensitivity)`
			`* Data Format: Extended mode (0x03). Full mode is not working yet. The output reports 0x3e and 0x3f need tampering with`
Fixed some markdown issues 2013-04-01 22:45:45 +02:00			`* In this mode the camera outputs x and y coordinates and a size dimension for the 4 brightest points.`
Added support for the IR Camera inside the Wiimote Thanks to Allan Glover: https://github.com/Engr-AllanG 2013-01-17 00:07:56 +01:00
Fixed some markdown issues 2013-04-01 22:45:45 +02:00			`Again, read through <http://wiibrew.org/wiki/Wiimote#IR_Camera> to get an understanding of the camera and its settings.`