USB_Host_Shield_2.0/examples/Bluetooth/SPPMulti/SPPMulti.ino

63 lines
2.3 KiB
Arduino
Raw Normal View History

2013-02-04 08:36:52 +01:00
/*
Example sketch for the RFCOMM/SPP Bluetooth library - developed by Kristian Lauszus
For more information visit my blog: http://blog.tkjelectronics.dk/ or
send me an e-mail: kristianl@tkjelectronics.com
*/
#include <SPP.h>
2013-08-13 21:31:52 +02:00
#include <usbhub.h>
2013-02-04 08:36:52 +01:00
USB Usb;
2013-08-13 21:31:52 +02:00
USBHub Hub1(&Usb); // Some dongles have a hub inside
2013-02-04 08:36:52 +01:00
BTD Btd(&Usb); // You have to create the Bluetooth Dongle instance like so
2013-06-12 05:11:43 +02:00
SPP* SerialBT[2]; // We will use this pointer to store the two instance, you can easily make it larger if you like, but it will use a lot of RAM!
2013-02-04 08:36:52 +01:00
const uint8_t length = sizeof(SerialBT)/sizeof(SerialBT[0]); // Get the lenght of the array
boolean firstMessage[length] = { true }; // Set all to true
uint8_t buffer[50];
void setup() {
2013-06-12 05:11:43 +02:00
for(uint8_t i=0;i<length;i++)
SerialBT[i] = new SPP(&Btd); // This will set the name to the default: "Arduino" and the pin to "1234" for all connections
2013-02-04 08:36:52 +01:00
Serial.begin(115200);
if (Usb.Init() == -1) {
Serial.print(F("\r\nOSC did not start"));
while(1); //halt
}
Serial.print(F("\r\nSPP Bluetooth Library Started"));
}
void loop() {
2013-05-07 15:50:38 +02:00
Usb.Task(); // The SPP data is actually not send until this is called, one could call SerialBT.send() directly as well
2013-02-04 08:36:52 +01:00
for(uint8_t i=0;i<length;i++) {
if(SerialBT[i]->connected) {
if(firstMessage[i]) {
firstMessage[i] = false;
SerialBT[i]->println(F("Hello from Arduino")); // Send welcome message
}
if(SerialBT[i]->available())
Serial.write(SerialBT[i]->read());
}
else
2013-02-04 08:36:52 +01:00
firstMessage[i] = true;
}
if(Serial.available()) {
delay(10); // Wait for the rest of the data to arrive
uint8_t i = 0;
2013-06-12 05:11:43 +02:00
while(Serial.available() && i < sizeof(buffer)) // Read the data
2013-02-04 08:36:52 +01:00
buffer[i++] = Serial.read();
/*
Set the connection you want to send to using the first character
For instace "0Hello World" would send "Hello World" to connection 0
*/
uint8_t id = buffer[0]-'0'; // Convert from ASCII
2013-02-04 09:33:07 +01:00
if(id < length && i > 1) { // And then compare to length and make sure there is any text
2013-02-04 08:36:52 +01:00
if(SerialBT[id]->connected) { // Check if a device is actually connected
for(uint8_t i2 = 0; i2 < i-1; i2++) // Don't include the first character
buffer[i2] = buffer[i2+1];
SerialBT[id]->write(buffer,i-1); // Send the data
2013-02-04 08:36:52 +01:00
}
}
}
}