USB_Host_Shield_2.0/examples/Bluetooth/WiiMulti/WiiMulti.ino

114 lines
3.8 KiB
Arduino
Raw Normal View History

/*
Example sketch for the Wiimote Bluetooth library - developed by Kristian Lauszus
This example show how one can use multiple controllers with the library
For more information visit my blog: http://blog.tkjelectronics.dk/ or
send me an e-mail: kristianl@tkjelectronics.com
*/
#include <Wii.h>
USB Usb;
BTD Btd(&Usb); // You have to create the Bluetooth Dongle instance like so
//WII Wii(&Btd,PAIR); // You will have to pair each controller with the dongle before you can define the instances like below
WII Wii_1(&Btd);
WII Wii_2(&Btd);
//WII Wii_3(&Btd); // You can create as many instances as you like, but it will take up a lot of RAM!!
WII* Wii[2]; // We will use this pointer to store the two instance, you can easily make it larger if you like
const uint8_t length = sizeof(Wii)/sizeof(Wii[0]); // Get the lenght of the array
bool printAngle[length];
void setup() {
Wii[0] = &Wii_1;
Wii[1] = &Wii_2;
//Wii[2] = &Wii_3; // You only need to uncomment this if you wanted to use another controller
Serial.begin(115200);
if (Usb.Init() == -1) {
Serial.print(F("\r\nOSC did not start"));
while(1); //halt
}
Serial.print(F("\r\nWiimote Bluetooth Library Started"));
}
void loop() {
Usb.Task();
for(uint8_t i=0;i<length;i++) {
if(!Wii[i]) continue; // Skip if it hasn't been defined
if(Wii[i]->wiimoteConnected) {
if(Wii[i]->getButtonClick(HOME)) { // You can use getButtonPress to see if the button is held down
Serial.print(F("\r\nHOME"));
2013-01-23 22:47:47 +01:00
Wii[i]->disconnect();
}
else {
if(Wii[i]->getButtonClick(LEFT)) {
Wii[i]->setAllOff();
Wii[i]->setLedOn(LED1);
Serial.print(F("\r\nLeft"));
}
if(Wii[i]->getButtonClick(RIGHT)) {
Wii[i]->setAllOff();
Wii[i]->setLedOn(LED3);
Serial.print(F("\r\nRight"));
}
if(Wii[i]->getButtonClick(DOWN)) {
Wii[i]->setAllOff();
Wii[i]->setLedOn(LED4);
Serial.print(F("\r\nDown"));
}
if(Wii[i]->getButtonClick(UP)) {
Wii[i]->setAllOff();
Wii[i]->setLedOn(LED2);
Serial.print(F("\r\nUp"));
}
if(Wii[i]->getButtonClick(PLUS))
Serial.print(F("\r\nPlus"));
if(Wii[i]->getButtonClick(MINUS))
Serial.print(F("\r\nMinus"));
if(Wii[i]->getButtonClick(ONE))
Serial.print(F("\r\nOne"));
if(Wii[i]->getButtonClick(TWO))
Serial.print(F("\r\nTwo"));
if(Wii[i]->getButtonClick(A)) {
printAngle[i] = !printAngle[i];
Serial.print(F("\r\nA"));
}
if(Wii[i]->getButtonClick(B)) {
Wii[i]->setRumbleToggle();
Serial.print(F("\r\nB"));
}
}
if(printAngle[i]) {
Serial.print(F("\r\nPitch: "));
Serial.print(Wii[i]->getPitch());
Serial.print(F("\tRoll: "));
Serial.print(Wii[i]->getRoll());
if(Wii[i]->motionPlusConnected) {
Serial.print(F("\tYaw: "));
Serial.print(Wii[i]->getYaw());
}
if(Wii[i]->nunchuckConnected) {
Serial.print(F("\tNunchuck Pitch: "));
Serial.print(Wii[i]->nunchuckPitch);
Serial.print(F("\tNunchuck Roll: "));
Serial.print(Wii[i]->nunchuckRoll);
}
}
}
if(Wii[i]->nunchuckConnected) {
if(Wii[i]->getButtonClick(Z))
Serial.print(F("\r\nZ"));
if(Wii[i]->getButtonClick(C))
Serial.print(F("\r\nC"));
if(Wii[i]->getAnalogHat(HatX) > 137 || Wii[i]->getAnalogHat(HatX) < 117 || Wii[i]->getAnalogHat(HatY) > 137 || Wii[i]->getAnalogHat(HatY) < 117) {
Serial.print(F("\r\nHatX: "));
Serial.print(Wii[i]->getAnalogHat(HatX));
Serial.print(F("\tHatY: "));
Serial.print(Wii[i]->getAnalogHat(HatY));
}
}
}
}