first release

This commit is contained in:
Oleg Mazurov 2011-06-22 11:41:22 -06:00
parent f1802bbc7a
commit 05726f3ed1
33 changed files with 1665 additions and 75 deletions

6
README
View file

@ -1,5 +1 @@
This is Rev.2.0 of MAX3421E-based USB Host Library for Arduino. At the moment, this repo contains current development copy
of the code facilitating developer's exchange. For those not involved in the project, the code in its' current state doesn't bear any value.
In other words, nothing works yet.
The code uses slightly modified Konstantin Chizhov's AVR pin templates, see the original here -> https://github.com/KonstantinChizhov/AvrProjects
This is Rev.2.0 of MAX3421E-based USB Host Shield Library. Project web site is http://www.circuitsathome.com

21
Usb.cpp
View file

@ -1,3 +1,19 @@
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
/* USB functions */
#include "avrpins.h"
@ -218,7 +234,7 @@ uint8_t USB::InTransfer(EpInfo *pep, uint16_t nak_limit, uint16_t *nbytesptr, ui
if(( regRd( rHIRQ ) & bmRCVDAVIRQ ) == 0 )
return ( 0xf0 ); //receive error
pktsize = regRd( rRCVBC ); //number of received bytes
pktsize = regRd( rRCVBC ); //number of received bytes */
int16_t mem_left = (int16_t)nbytes - *((int16_t*)nbytesptr);
@ -243,10 +259,9 @@ uint8_t USB::InTransfer(EpInfo *pep, uint16_t nak_limit, uint16_t *nbytesptr, ui
} //while( 1 )
}
/* OUT transfer to arbitrary endpoint. Assumes PERADDR is set. Handles multiple packets if necessary. Transfers 'nbytes' bytes. */
/* OUT transfer to arbitrary endpoint. Handles multiple packets if necessary. Transfers 'nbytes' bytes. */
/* Handles NAK bug per Maxim Application Note 4000 for single buffer transfer */
/* rcode 0 if no errors. rcode 01-0f is relayed from HRSL */
/* major part of this function borrowed from code shared by Richard Ibbotson */
uint8_t USB::outTransfer( uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* data )
{
EpInfo *pep = NULL;

30
Usb.h
View file

@ -1,3 +1,19 @@
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
/* USB functions */
#ifndef _usb_h_
#define _usb_h_
@ -12,9 +28,14 @@
#include "address.h"
#include <WProgram.h>
#include "..\DebugTools\printhex.h"
#include "..\DebugTools\hexdump.h"
#include "..\DebugTools\message.h"
#include "printhex.h"
#include "hexdump.h"
#include "message.h"
/* shield pins. First parameter - SS pin, second parameter - INT pin */
//typedef MAX3421e<P6, P3> MAX3421E; // Black Widow
typedef MAX3421e<P10, P9> MAX3421E; // Official Arduinos (UNO, Duemilanove, Mega, 2560
#define USBTRACE(s) (Serial.print((s)))
#define USBTRACE2(s,r) (Serial.print((s)), Serial.println((r),HEX))
@ -134,9 +155,6 @@ public:
};
//typedef MAX3421e<P6, P3> MAX3421E; // Black Widdow
typedef MAX3421e<P10, P9> MAX3421E; // Duemielanove
class USB : public MAX3421E
{
AddressPoolImpl<USB_NUMDEVICES> addrPool;

View file

@ -1,3 +1,19 @@
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
#if !defined(__ADDRESS_H__)
#define __ADDRESS_H__

View file

@ -1,9 +1,25 @@
/* copied from Konstantin Chizhov's AVR port templates */
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
/* derived from Konstantin Chizhov's AVR port templates */
#ifndef _avrpins_h_
#define _avrpins_h_
//#include "WProgram.h"
#include <avr/io.h>
#ifdef PORTA

View file

@ -1,3 +1,19 @@
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
#include "cdcacm.h"
const uint8_t ACM::epDataInIndex = 1;

View file

@ -1,3 +1,19 @@
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
#if !defined(__CDCACM_H__)
#define __CDCACM_H__
@ -10,9 +26,9 @@
#include "Usb.h"
#include <WProgram.h>
#include "..\DebugTools\printhex.h"
#include "..\DebugTools\hexdump.h"
#include "..\DebugTools\message.h"
#include "printhex.h"
#include "hexdump.h"
#include "message.h"
#include "confdescparser.h"

View file

@ -1,3 +1,19 @@
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
#include "cdcftdi.h"
const uint8_t FTDI::epDataInIndex = 1;

View file

@ -1,3 +1,19 @@
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
#if !defined(__CDCFTDI_H__)
#define __CDCFTDI_H__
@ -10,9 +26,9 @@
#include "Usb.h"
#include <WProgram.h>
#include "..\DebugTools\printhex.h"
#include "..\DebugTools\hexdump.h"
#include "..\DebugTools\message.h"
#include "printhex.h"
#include "hexdump.h"
#include "message.h"
#include "confdescparser.h"

View file

@ -1,3 +1,19 @@
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
#include "cdcprolific.h"
PL::PL(USB *p, CDCAsyncOper *pasync) :

View file

@ -1,3 +1,19 @@
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
#if !defined(__CDCPROLIFIC_H__)
#define __CDCPROLIFIC_H__
@ -10,9 +26,9 @@
#include "Usb.h"
#include <WProgram.h>
#include "..\DebugTools\printhex.h"
#include "..\DebugTools\hexdump.h"
#include "..\DebugTools\message.h"
#include "printhex.h"
#include "hexdump.h"
#include "message.h"
#include "confdescparser.h"
#include "cdcacm.h"

View file

@ -1,13 +1,29 @@
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
#if !defined(__CONFDESCPARSER_H__)
#define __CONFDESCPARSER_H__
#include <inttypes.h>
#include "..\ParseTools\parsetools.h"
#include <avr/pgmspace.h>
#include "..\DebugTools\printhex.h"
#include "..\DebugTools\hexdump.h"
#include "..\DebugTools\message.h"
#include "printhex.h"
#include "hexdump.h"
#include "message.h"
#include "parsetools.h"
//#include "hid.h"

View file

@ -0,0 +1,103 @@
#include <avrpins.h>
#include <max3421e.h>
#include <usbhost.h>
#include <usb_ch9.h>
#include <Usb.h>
#include <usbhub.h>
#include <avr/pgmspace.h>
#include <address.h>
#include <cdcacm.h>
#include <printhex.h>
#include <message.h>
#include <hexdump.h>
#include <parsetools.h>
#include "pgmstrings.h"
class ACMAsyncOper : public CDCAsyncOper
{
public:
virtual uint8_t OnInit(ACM *pacm);
};
uint8_t ACMAsyncOper::OnInit(ACM *pacm)
{
uint8_t rcode;
// Set DTR = 1 RTS=1
rcode = pacm->SetControlLineState(3);
if (rcode)
{
ErrorMessage<uint8_t>(PSTR("SetControlLineState"), rcode);
return rcode;
}
LINE_CODING lc;
lc.dwDTERate = 115200;
lc.bCharFormat = 0;
lc.bParityType = 0;
lc.bDataBits = 8;
rcode = pacm->SetLineCoding(&lc);
if (rcode)
ErrorMessage<uint8_t>(PSTR("SetLineCoding"), rcode);
return rcode;
}
USB Usb;
//USBHub Hub(&Usb);
ACMAsyncOper AsyncOper;
ACM Acm(&Usb, &AsyncOper);
void setup()
{
Serial.begin( 115200 );
Serial.println("Start");
if (Usb.Init() == -1)
Serial.println("OSCOKIRQ failed to assert");
delay( 200 );
}
void loop()
{
Usb.Task();
if( Usb.getUsbTaskState() == USB_STATE_RUNNING )
{
uint8_t rcode;
/* reading the keyboard */
if(Serial.available()) {
uint8_t data= Serial.read();
/* sending to the phone */
rcode = Acm.SndData(1, &data);
if (rcode)
ErrorMessage<uint8_t>(PSTR("SndData"), rcode);
}//if(Serial.available()...
delay(50);
/* reading the phone */
/* buffer size must be larger than max.packet size */
uint8_t buf[32];
uint16_t rcvd = 32;
rcode = Acm.RcvData(&rcvd, buf);
if (rcode && rcode != hrNAK)
ErrorMessage<uint8_t>(PSTR("Ret"), rcode);
if( rcvd ) { //more than zero bytes received
for(uint16_t i=0; i < rcvd; i++ ) {
Serial.print(buf[i]); //printing on the screen
}
}
delay(10);
}//if( Usb.getUsbTaskState() == USB_STATE_RUNNING..
}

View file

@ -0,0 +1,52 @@
#if !defined(__PGMSTRINGS_H__)
#define __PGMSTRINGS_H__
#define LOBYTE(x) ((char*)(&(x)))[0]
#define HIBYTE(x) ((char*)(&(x)))[1]
#define BUFSIZE 256 //buffer size
/* Print strings in Program Memory */
const char Gen_Error_str[] PROGMEM = "\r\nRequest error. Error code:\t";
const char Dev_Header_str[] PROGMEM ="\r\nDevice descriptor: ";
const char Dev_Length_str[] PROGMEM ="\r\nDescriptor Length:\t";
const char Dev_Type_str[] PROGMEM ="\r\nDescriptor type:\t";
const char Dev_Version_str[] PROGMEM ="\r\nUSB version:\t\t";
const char Dev_Class_str[] PROGMEM ="\r\nDevice class:\t\t";
const char Dev_Subclass_str[] PROGMEM ="\r\nDevice Subclass:\t";
const char Dev_Protocol_str[] PROGMEM ="\r\nDevice Protocol:\t";
const char Dev_Pktsize_str[] PROGMEM ="\r\nMax.packet size:\t";
const char Dev_Vendor_str[] PROGMEM ="\r\nVendor ID:\t\t";
const char Dev_Product_str[] PROGMEM ="\r\nProduct ID:\t\t";
const char Dev_Revision_str[] PROGMEM ="\r\nRevision ID:\t\t";
const char Dev_Mfg_str[] PROGMEM ="\r\nMfg.string index:\t";
const char Dev_Prod_str[] PROGMEM ="\r\nProd.string index:\t";
const char Dev_Serial_str[] PROGMEM ="\r\nSerial number index:\t";
const char Dev_Nconf_str[] PROGMEM ="\r\nNumber of conf.:\t";
const char Conf_Trunc_str[] PROGMEM ="Total length truncated to 256 bytes";
const char Conf_Header_str[] PROGMEM ="\r\nConfiguration descriptor:";
const char Conf_Totlen_str[] PROGMEM ="\r\nTotal length:\t\t";
const char Conf_Nint_str[] PROGMEM ="\r\nNum.intf:\t\t";
const char Conf_Value_str[] PROGMEM ="\r\nConf.value:\t\t";
const char Conf_String_str[] PROGMEM ="\r\nConf.string:\t\t";
const char Conf_Attr_str[] PROGMEM ="\r\nAttr.:\t\t\t";
const char Conf_Pwr_str[] PROGMEM ="\r\nMax.pwr:\t\t";
const char Int_Header_str[] PROGMEM ="\r\n\r\nInterface descriptor:";
const char Int_Number_str[] PROGMEM ="\r\nIntf.number:\t\t";
const char Int_Alt_str[] PROGMEM ="\r\nAlt.:\t\t\t";
const char Int_Endpoints_str[] PROGMEM ="\r\nEndpoints:\t\t";
const char Int_Class_str[] PROGMEM ="\r\nIntf. Class:\t\t";
const char Int_Subclass_str[] PROGMEM ="\r\nIntf. Subclass:\t\t";
const char Int_Protocol_str[] PROGMEM ="\r\nIntf. Protocol:\t\t";
const char Int_String_str[] PROGMEM ="\r\nIntf.string:\t\t";
const char End_Header_str[] PROGMEM ="\r\n\r\nEndpoint descriptor:";
const char End_Address_str[] PROGMEM ="\r\nEndpoint address:\t";
const char End_Attr_str[] PROGMEM ="\r\nAttr.:\t\t\t";
const char End_Pktsize_str[] PROGMEM ="\r\nMax.pkt size:\t\t";
const char End_Interval_str[] PROGMEM ="\r\nPolling interval:\t";
const char Unk_Header_str[] PROGMEM = "\r\nUnknown descriptor:";
const char Unk_Length_str[] PROGMEM ="\r\nLength:\t\t";
const char Unk_Type_str[] PROGMEM ="\r\nType:\t\t";
const char Unk_Contents_str[] PROGMEM ="\r\nContents:\t";
#endif // __PGMSTRINGS_H__

View file

@ -0,0 +1,343 @@
#include <avrpins.h>
#include <max3421e.h>
#include <usbhost.h>
#include <usb_ch9.h>
#include <Usb.h>
#include <usbhub.h>
#include <avr/pgmspace.h>
#include <address.h>
#include "pgmstrings.h"
USB Usb;
USBHub Hub1(&Usb);
USBHub Hub2(&Usb);
USBHub Hub3(&Usb);
USBHub Hub4(&Usb);
uint32_t next_time;
void PrintAllAddresses(UsbDevice *pdev)
{
UsbDeviceAddress adr;
adr.devAddress = pdev->address;
Serial.print("\r\nAddr:");
Serial.print(adr.devAddress, HEX);
Serial.print("(");
Serial.print(adr.bmHub, HEX);
Serial.print(".");
Serial.print(adr.bmParent, HEX);
Serial.print(".");
Serial.print(adr.bmAddress, HEX);
Serial.println(")");
}
void PrintAddress(uint8_t addr)
{
UsbDeviceAddress adr;
adr.devAddress = addr;
Serial.print("\r\nADDR:\t");
Serial.println(adr.devAddress,HEX);
Serial.print("DEV:\t");
Serial.println(adr.bmAddress,HEX);
Serial.print("PRNT:\t");
Serial.println(adr.bmParent,HEX);
Serial.print("HUB:\t");
Serial.println(adr.bmHub,HEX);
}
void setup()
{
Serial.begin( 115200 );
Serial.println("Start");
if (Usb.Init() == -1)
Serial.println("OSC did not start.");
delay( 200 );
next_time = millis() + 10000;
}
byte getdevdescr( byte addr, byte &num_conf );
void PrintDescriptors(uint8_t addr)
{
uint8_t rcode = 0;
byte num_conf = 0;
rcode = getdevdescr( (byte)addr, num_conf );
if( rcode )
{
printProgStr(Gen_Error_str);
print_hex( rcode, 8 );
}
Serial.print("\r\n");
for (int i=0; i<num_conf; i++)
{
rcode = getconfdescr( addr, i ); // get configuration descriptor
if( rcode )
{
printProgStr(Gen_Error_str);
print_hex(rcode, 8);
}
Serial.println("\r\n");
}
}
void PrintAllDescriptors(UsbDevice *pdev)
{
Serial.println("\r\n");
print_hex(pdev->address, 8);
Serial.println("\r\n--");
PrintDescriptors( pdev->address );
}
void loop()
{
Usb.Task();
if( Usb.getUsbTaskState() == USB_STATE_RUNNING )
{
if (millis() >= next_time)
{
Usb.ForEachUsbDevice(&PrintAllDescriptors);
Usb.ForEachUsbDevice(&PrintAllAddresses);
while( 1 ); //stop
}
}
}
byte getdevdescr( byte addr, byte &num_conf )
{
USB_DEVICE_DESCRIPTOR buf;
byte rcode;
rcode = Usb.getDevDescr( addr, 0, 0x12, ( uint8_t *)&buf );
if( rcode ) {
return( rcode );
}
printProgStr(Dev_Header_str);
printProgStr(Dev_Length_str);
print_hex( buf.bLength, 8 );
printProgStr(Dev_Type_str);
print_hex( buf.bDescriptorType, 8 );
printProgStr(Dev_Version_str);
print_hex( buf.bcdUSB, 16 );
printProgStr(Dev_Class_str);
print_hex( buf.bDeviceClass, 8 );
printProgStr(Dev_Subclass_str);
print_hex( buf.bDeviceSubClass, 8 );
printProgStr(Dev_Protocol_str);
print_hex( buf.bDeviceProtocol, 8 );
printProgStr(Dev_Pktsize_str);
print_hex( buf.bMaxPacketSize0, 8 );
printProgStr(Dev_Vendor_str);
print_hex( buf.idVendor, 16 );
printProgStr(Dev_Product_str);
print_hex( buf.idProduct, 16 );
printProgStr(Dev_Revision_str);
print_hex( buf.bcdDevice, 16 );
printProgStr(Dev_Mfg_str);
print_hex( buf.iManufacturer, 8 );
printProgStr(Dev_Prod_str);
print_hex( buf.iProduct, 8 );
printProgStr(Dev_Serial_str);
print_hex( buf.iSerialNumber, 8 );
printProgStr(Dev_Nconf_str);
print_hex( buf.bNumConfigurations, 8 );
num_conf = buf.bNumConfigurations;
return( 0 );
}
void printhubdescr(uint8_t *descrptr, uint8_t addr)
{
HubDescriptor *pHub = (HubDescriptor*) descrptr;
uint8_t len = *((uint8_t*)descrptr);
printProgStr(PSTR("\r\n\r\nHub Descriptor:\r\n"));
printProgStr(PSTR("bDescLength:\t\t"));
Serial.println(pHub->bDescLength, HEX);
printProgStr(PSTR("bDescriptorType:\t"));
Serial.println(pHub->bDescriptorType, HEX);
printProgStr(PSTR("bNbrPorts:\t\t"));
Serial.println(pHub->bNbrPorts, HEX);
printProgStr(PSTR("LogPwrSwitchMode:\t"));
Serial.println(pHub->LogPwrSwitchMode, BIN);
printProgStr(PSTR("CompoundDevice:\t\t"));
Serial.println(pHub->CompoundDevice, BIN);
printProgStr(PSTR("OverCurrentProtectMode:\t"));
Serial.println(pHub->OverCurrentProtectMode, BIN);
printProgStr(PSTR("TTThinkTime:\t\t"));
Serial.println(pHub->TTThinkTime, BIN);
printProgStr(PSTR("PortIndicatorsSupported:"));
Serial.println(pHub->PortIndicatorsSupported, BIN);
printProgStr(PSTR("Reserved:\t\t"));
Serial.println(pHub->Reserved, HEX);
printProgStr(PSTR("bPwrOn2PwrGood:\t\t"));
Serial.println(pHub->bPwrOn2PwrGood, HEX);
printProgStr(PSTR("bHubContrCurrent:\t"));
Serial.println(pHub->bHubContrCurrent, HEX);
for (uint8_t i=7; i<len; i++)
print_hex(descrptr[i], 8);
//for (uint8_t i=1; i<=pHub->bNbrPorts; i++)
// PrintHubPortStatus(&Usb, addr, i, 1);
}
byte getconfdescr( byte addr, byte conf )
{
uint8_t buf[ BUFSIZE ];
uint8_t* buf_ptr = buf;
byte rcode;
byte descr_length;
byte descr_type;
unsigned int total_length;
rcode = Usb.getConfDescr( addr, 0, 4, conf, buf ); //get total length
LOBYTE( total_length ) = buf[ 2 ];
HIBYTE( total_length ) = buf[ 3 ];
if( total_length > 256 ) { //check if total length is larger than buffer
printProgStr(Conf_Trunc_str);
total_length = 256;
}
rcode = Usb.getConfDescr( addr, 0, total_length, conf, buf ); //get the whole descriptor
while( buf_ptr < buf + total_length ) { //parsing descriptors
descr_length = *( buf_ptr );
descr_type = *( buf_ptr + 1 );
switch( descr_type ) {
case( USB_DESCRIPTOR_CONFIGURATION ):
printconfdescr( buf_ptr );
break;
case( USB_DESCRIPTOR_INTERFACE ):
printintfdescr( buf_ptr );
break;
case( USB_DESCRIPTOR_ENDPOINT ):
printepdescr( buf_ptr );
break;
case 0x29:
printhubdescr( buf_ptr, addr );
break;
default:
printunkdescr( buf_ptr );
break;
}//switch( descr_type
buf_ptr = ( buf_ptr + descr_length ); //advance buffer pointer
}//while( buf_ptr <=...
return( 0 );
}
/* prints hex numbers with leading zeroes */
// copyright, Peter H Anderson, Baltimore, MD, Nov, '07
// source: http://www.phanderson.com/arduino/arduino_display.html
void print_hex(int v, int num_places)
{
int mask=0, n, num_nibbles, digit;
for (n=1; n<=num_places; n++) {
mask = (mask << 1) | 0x0001;
}
v = v & mask; // truncate v to specified number of places
num_nibbles = num_places / 4;
if ((num_places % 4) != 0) {
++num_nibbles;
}
do {
digit = ((v >> (num_nibbles-1) * 4)) & 0x0f;
Serial.print(digit, HEX);
}
while(--num_nibbles);
}
/* function to print configuration descriptor */
void printconfdescr( uint8_t* descr_ptr )
{
USB_CONFIGURATION_DESCRIPTOR* conf_ptr = ( USB_CONFIGURATION_DESCRIPTOR* )descr_ptr;
printProgStr(Conf_Header_str);
printProgStr(Conf_Totlen_str);
print_hex( conf_ptr->wTotalLength, 16 );
printProgStr(Conf_Nint_str);
print_hex( conf_ptr->bNumInterfaces, 8 );
printProgStr(Conf_Value_str);
print_hex( conf_ptr->bConfigurationValue, 8 );
printProgStr(Conf_String_str);
print_hex( conf_ptr->iConfiguration, 8 );
printProgStr(Conf_Attr_str);
print_hex( conf_ptr->bmAttributes, 8 );
printProgStr(Conf_Pwr_str);
print_hex( conf_ptr->bMaxPower, 8 );
return;
}
/* function to print interface descriptor */
void printintfdescr( uint8_t* descr_ptr )
{
USB_INTERFACE_DESCRIPTOR* intf_ptr = ( USB_INTERFACE_DESCRIPTOR* )descr_ptr;
printProgStr(Int_Header_str);
printProgStr(Int_Number_str);
print_hex( intf_ptr->bInterfaceNumber, 8 );
printProgStr(Int_Alt_str);
print_hex( intf_ptr->bAlternateSetting, 8 );
printProgStr(Int_Endpoints_str);
print_hex( intf_ptr->bNumEndpoints, 8 );
printProgStr(Int_Class_str);
print_hex( intf_ptr->bInterfaceClass, 8 );
printProgStr(Int_Subclass_str);
print_hex( intf_ptr->bInterfaceSubClass, 8 );
printProgStr(Int_Protocol_str);
print_hex( intf_ptr->bInterfaceProtocol, 8 );
printProgStr(Int_String_str);
print_hex( intf_ptr->iInterface, 8 );
return;
}
/* function to print endpoint descriptor */
void printepdescr( uint8_t* descr_ptr )
{
USB_ENDPOINT_DESCRIPTOR* ep_ptr = ( USB_ENDPOINT_DESCRIPTOR* )descr_ptr;
printProgStr(End_Header_str);
printProgStr(End_Address_str);
print_hex( ep_ptr->bEndpointAddress, 8 );
printProgStr(End_Attr_str);
print_hex( ep_ptr->bmAttributes, 8 );
printProgStr(End_Pktsize_str);
print_hex( ep_ptr->wMaxPacketSize, 16 );
printProgStr(End_Interval_str);
print_hex( ep_ptr->bInterval, 8 );
return;
}
/*function to print unknown descriptor */
void printunkdescr( uint8_t* descr_ptr )
{
byte length = *descr_ptr;
byte i;
printProgStr(Unk_Header_str);
printProgStr(Unk_Length_str);
print_hex( *descr_ptr, 8 );
printProgStr(Unk_Type_str);
print_hex( *(descr_ptr + 1 ), 8 );
printProgStr(Unk_Contents_str);
descr_ptr += 2;
for( i = 0; i < length; i++ ) {
print_hex( *descr_ptr, 8 );
descr_ptr++;
}
}
/* Print a string from Program Memory directly to save RAM */
void printProgStr(const prog_char str[])
{
char c;
if(!str) return;
while((c = pgm_read_byte(str++)))
Serial.print(c,BYTE);
}

View file

@ -0,0 +1,52 @@
#if !defined(__PGMSTRINGS_H__)
#define __PGMSTRINGS_H__
#define LOBYTE(x) ((char*)(&(x)))[0]
#define HIBYTE(x) ((char*)(&(x)))[1]
#define BUFSIZE 256 //buffer size
/* Print strings in Program Memory */
const char Gen_Error_str[] PROGMEM = "\r\nRequest error. Error code:\t";
const char Dev_Header_str[] PROGMEM ="\r\nDevice descriptor: ";
const char Dev_Length_str[] PROGMEM ="\r\nDescriptor Length:\t";
const char Dev_Type_str[] PROGMEM ="\r\nDescriptor type:\t";
const char Dev_Version_str[] PROGMEM ="\r\nUSB version:\t\t";
const char Dev_Class_str[] PROGMEM ="\r\nDevice class:\t\t";
const char Dev_Subclass_str[] PROGMEM ="\r\nDevice Subclass:\t";
const char Dev_Protocol_str[] PROGMEM ="\r\nDevice Protocol:\t";
const char Dev_Pktsize_str[] PROGMEM ="\r\nMax.packet size:\t";
const char Dev_Vendor_str[] PROGMEM ="\r\nVendor ID:\t\t";
const char Dev_Product_str[] PROGMEM ="\r\nProduct ID:\t\t";
const char Dev_Revision_str[] PROGMEM ="\r\nRevision ID:\t\t";
const char Dev_Mfg_str[] PROGMEM ="\r\nMfg.string index:\t";
const char Dev_Prod_str[] PROGMEM ="\r\nProd.string index:\t";
const char Dev_Serial_str[] PROGMEM ="\r\nSerial number index:\t";
const char Dev_Nconf_str[] PROGMEM ="\r\nNumber of conf.:\t";
const char Conf_Trunc_str[] PROGMEM ="Total length truncated to 256 bytes";
const char Conf_Header_str[] PROGMEM ="\r\nConfiguration descriptor:";
const char Conf_Totlen_str[] PROGMEM ="\r\nTotal length:\t\t";
const char Conf_Nint_str[] PROGMEM ="\r\nNum.intf:\t\t";
const char Conf_Value_str[] PROGMEM ="\r\nConf.value:\t\t";
const char Conf_String_str[] PROGMEM ="\r\nConf.string:\t\t";
const char Conf_Attr_str[] PROGMEM ="\r\nAttr.:\t\t\t";
const char Conf_Pwr_str[] PROGMEM ="\r\nMax.pwr:\t\t";
const char Int_Header_str[] PROGMEM ="\r\n\r\nInterface descriptor:";
const char Int_Number_str[] PROGMEM ="\r\nIntf.number:\t\t";
const char Int_Alt_str[] PROGMEM ="\r\nAlt.:\t\t\t";
const char Int_Endpoints_str[] PROGMEM ="\r\nEndpoints:\t\t";
const char Int_Class_str[] PROGMEM ="\r\nIntf. Class:\t\t";
const char Int_Subclass_str[] PROGMEM ="\r\nIntf. Subclass:\t\t";
const char Int_Protocol_str[] PROGMEM ="\r\nIntf. Protocol:\t\t";
const char Int_String_str[] PROGMEM ="\r\nIntf.string:\t\t";
const char End_Header_str[] PROGMEM ="\r\n\r\nEndpoint descriptor:";
const char End_Address_str[] PROGMEM ="\r\nEndpoint address:\t";
const char End_Attr_str[] PROGMEM ="\r\nAttr.:\t\t\t";
const char End_Pktsize_str[] PROGMEM ="\r\nMax.pkt size:\t\t";
const char End_Interval_str[] PROGMEM ="\r\nPolling interval:\t";
const char Unk_Header_str[] PROGMEM = "\r\nUnknown descriptor:";
const char Unk_Length_str[] PROGMEM ="\r\nLength:\t\t";
const char Unk_Type_str[] PROGMEM ="\r\nType:\t\t";
const char Unk_Contents_str[] PROGMEM ="\r\nContents:\t";
#endif // __PGMSTRINGS_H__

340
gpl2.txt Normal file
View file

@ -0,0 +1,340 @@
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users. This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by
the GNU Library General Public License instead.) You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it
in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know their
rights.
We protect your rights with two steps: (1) copyright the software, and
(2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software. If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original
authors' reputations.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and
modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains
a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License. The "Program", below,
refers to any such program or work, and a "work based on the Program"
means either the Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it,
either verbatim or with modifications and/or translated into another
language. (Hereinafter, translation is included without limitation in
the term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of
running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the
Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's
source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the
notices that refer to this License and to the absence of any warranty;
and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and
you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion
of it, thus forming a work based on the Program, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices
stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in
whole or in part contains or is derived from the Program or any
part thereof, to be licensed as a whole at no charge to all third
parties under the terms of this License.
c) If the modified program normally reads commands interactively
when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide
a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this
License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on
the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a work based
on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Program.
In addition, mere aggregation of another work not based on the Program
with the Program (or with a work based on the Program) on a volume of
a storage or distribution medium does not bring the other work under
the scope of this License.
3. You may copy and distribute the Program (or a work based on it,
under Section 2) in object code or executable form under the terms of
Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable
source code, which must be distributed under the terms of Sections
1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three
years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to be
distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer
to distribute corresponding source code. (This alternative is
allowed only for noncommercial distribution and only if you
received the program in object code or executable form with such
an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for
making modifications to it. For an executable work, complete source
code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to
control compilation and installation of the executable. However, as a
special exception, the source code distributed need not include
anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component
itself accompanies the executable.
If distribution of executable or object code is made by offering
access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such
parties remain in full compliance.
5. You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify or
distribute the Program or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the
Program), the recipient automatically receives a license from the
original licensor to copy, distribute or modify the Program subject to
these terms and conditions. You may not impose any further
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to
this License.
7. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all. For example, if a patent
license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then
the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under
any particular circumstance, the balance of the section is intended to
apply and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system, which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License
may add an explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in or among
countries not thus excluded. In such case, this License incorporates
the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions
of the General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the Program
specifies a version number of this License which applies to it and "any
later version", you have the option of following the terms and conditions
either of that version or of any later version published by the Free
Software Foundation. If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software
Foundation.
10. If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the author
to ask for permission. For software which is copyrighted by the Free
Software Foundation, write to the Free Software Foundation; we sometimes
make exceptions for this. Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and
of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License. Of course, the commands you use may
be called something other than `show w' and `show c'; they could even be
mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your
school, if any, to sign a "copyright disclaimer" for the program, if
necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
`Gnomovision' (which makes passes at compilers) written by James Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the
library. If this is what you want to do, use the GNU Library General
Public License instead of this License.

58
hexdump.h Normal file
View file

@ -0,0 +1,58 @@
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
#if !defined(__HEXDUMP_H__)
#define __HEXDUMP_H__
#include <inttypes.h>
#include <avr/pgmspace.h>
#include "printhex.h"
template <class BASE_CLASS, class LEN_TYPE, class OFFSET_TYPE>
class HexDumper : public BASE_CLASS
{
uint8_t byteCount;
OFFSET_TYPE byteTotal;
public:
HexDumper() : byteCount(0), byteTotal(0) {};
void Initialize() { byteCount = 0; byteTotal = 0; };
virtual void Parse(const LEN_TYPE len, const uint8_t *pbuf, const OFFSET_TYPE &offset);
};
template <class BASE_CLASS, class LEN_TYPE, class OFFSET_TYPE>
void HexDumper<BASE_CLASS, LEN_TYPE, OFFSET_TYPE>::Parse(const LEN_TYPE len, const uint8_t *pbuf, const OFFSET_TYPE &offset)
{
for (LEN_TYPE j=0; j<len; j++, byteCount++, byteTotal++)
{
if (!byteCount)
{
PrintHex<OFFSET_TYPE>(byteTotal);
Serial.print(": ");
}
PrintHex<uint8_t>(pbuf[j]);
Serial.print(" ");
if (byteCount == 15)
{
Serial.println("");
byteCount = 0xFF;
}
}
}
#endif // __HEXDUMP_H__

16
hid.cpp
View file

@ -1,3 +1,19 @@
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
#include "hid.h"
//const uint16_t HID::maxHidInterfaces = 3;

22
hid.h
View file

@ -1,3 +1,19 @@
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
#if !defined(__HID_H__)
#define __HID_H__
@ -10,9 +26,9 @@
#include "Usb.h"
#include <WProgram.h>
#include "..\DebugTools\printhex.h"
#include "..\DebugTools\hexdump.h"
#include "..\DebugTools\message.h"
#include "printhex.h"
#include "hexdump.h"
#include "message.h"
#include "confdescparser.h"

View file

@ -1,3 +1,19 @@
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
#if !defined(__MASSTORAGE_H__)
#define __MASSTORAGE_H__
@ -10,9 +26,9 @@
#include "Usb.h"
#include <WProgram.h>
#include "..\DebugTools\printhex.h"
#include "..\DebugTools\hexdump.h"
#include "..\DebugTools\message.h"
#include "printhex.h"
#include "hexdump.h"
#include "message.h"
#include "confdescparser.h"

View file

@ -1,27 +1,31 @@
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
/* MAX3421E register/bit names and bitmasks */
#ifndef _max3421e_h_
#define _max3421e_h_
/* Arduino pin definitions */
/* pin numbers to port numbers */
//#define MAX_SS 10
//#define MAX_INT 3 // Black Widdow
#define MAX_INT 9 // Duemielanove
#define MAX_GPX 8
//#define MAX_RESET 7
//
//#define BPNT_0 3
//#define BPNT_1 2
//
//#define Select_MAX3421E digitalWrite( MAX_SS,LOW )
//#define Deselect_MAX3421E digitalWrite( MAX_SS,HIGH )
//#define MAX_INT 9 // Duemielanove
/* */
//#define MAX_GPX 8
#define ON true
#define OFF false

View file

@ -1,3 +1,19 @@
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
#include "Max_LCD.h"
#include "Max3421e.h"
@ -6,24 +22,6 @@
#include <inttypes.h>
#include "WProgram.h"
// When the display powers up, it is configured as follows:
//
// 1. Display clear
// 2. Function set:
// DL = 1; 8-bit interface data
// N = 0; 1-line display
// F = 0; 5x8 dot character font
// 3. Display on/off control:
// D = 0; Display off
// C = 0; Cursor off
// B = 0; Blinking off
// 4. Entry mode set:
// I/D = 1; Increment by 1
// S = 0; No shift
//
// Note, however, that resetting the Arduino doesn't reset the LCD, so we
// can't assume that its in that state when a sketch starts
// pin definition and set/clear
#define RS 0x04 // RS pin

View file

@ -1,9 +1,23 @@
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
//HD44780 compatible LCD display via MAX3421E GPOUT support header
//pinout: D[4-7] -> GPOUT[4-7], RS-> GPOUT[2], E ->GPOUT[3]
//
//this code is heavily borrowed from official Arduino source v.0017
// link to original http://code.google.com/p/arduino/source/browse/trunk/hardware/libraries/LiquidCrystal/LiquidCrystal.h
//
#ifndef _Max_LCD_h_
#define _Max_LCD_h_

27
message.cpp Normal file
View file

@ -0,0 +1,27 @@
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
#include "message.h"
void Notify(char const * msg)
//void Notify(const char* msg)
{
if(!msg) return;
char c;
while((c = pgm_read_byte(msg++)))
Serial.print(c,BYTE);
}

37
message.h Normal file
View file

@ -0,0 +1,37 @@
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
#if !defined(__MESSAGE_H__)
#define __MESSAGE_H__
#include <inttypes.h>
#include <avr/pgmspace.h>
#include "printhex.h"
void Notify(char const * msg);
//void Notify(const char* msg);
template <class ERROR_TYPE>
void ErrorMessage(char const * msg, ERROR_TYPE rcode = 0)
{
Notify(msg);
Notify(PSTR(": "));
PrintHex<ERROR_TYPE>(rcode);
Notify(PSTR("\r\n"));
}
#endif // __MESSAGE_H__

72
parsetools.cpp Normal file
View file

@ -0,0 +1,72 @@
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
#include "parsetools.h"
bool MultiByteValueParser::Parse(uint8_t **pp, uint16_t *pcntdn)
{
if (!pBuf)
{
Notify(PSTR("Buffer pointer is NULL!\r\n"));
return false;
}
for (; countDown && (*pcntdn); countDown--, (*pcntdn)--, (*pp)++)
pBuf[valueSize-countDown] = (**pp);
if (countDown)
return false;
countDown = valueSize;
return true;
}
bool PTPListParser::Parse(uint8_t **pp, uint16_t *pcntdn, PTP_ARRAY_EL_FUNC pf, const void *me)
{
switch (nStage)
{
case 0:
pBuf->valueSize = lenSize;
theParser.Initialize(pBuf);
nStage = 1;
case 1:
if (!theParser.Parse(pp, pcntdn))
return false;
arLen = 0;
arLen = (pBuf->valueSize >= 4) ? *((uint32_t*)pBuf->pValue) : (uint32_t)(*((uint16_t*)pBuf->pValue));
arLenCntdn = arLen;
nStage = 2;
case 2:
pBuf->valueSize = valSize;
theParser.Initialize(pBuf);
nStage = 3;
case 3:
for (; arLenCntdn; arLenCntdn--)
{
if (!theParser.Parse(pp, pcntdn))
return false;
if (pf)
pf(pBuf, (arLen - arLenCntdn), me);
}
nStage = 0;
}
return true;
}

147
parsetools.h Normal file
View file

@ -0,0 +1,147 @@
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
#if !defined(__PARSETOOLS_H__)
#define __PARSETOOLS_H__
#include <inttypes.h>
#include <avr/pgmspace.h>
#include "printhex.h"
#include "hexdump.h"
#include "message.h"
#include <WProgram.h>
struct MultiValueBuffer
{
uint8_t valueSize;
void *pValue;
};
class MultiByteValueParser
{
uint8_t * pBuf;
uint8_t countDown;
uint8_t valueSize;
public:
MultiByteValueParser() : pBuf(NULL), countDown(0), valueSize(0) {};
const uint8_t* GetBuffer() { return pBuf; };
void Initialize(MultiValueBuffer * const pbuf)
{
pBuf = (uint8_t*)pbuf->pValue;
countDown = valueSize = pbuf->valueSize;
};
bool Parse(uint8_t **pp, uint16_t *pcntdn);
};
class ByteSkipper
{
uint8_t *pBuf;
uint8_t nStage;
uint16_t countDown;
public:
ByteSkipper() : pBuf(NULL), nStage(0), countDown(0) {};
void Initialize(MultiValueBuffer *pbuf)
{
pBuf = (uint8_t*)pbuf->pValue;
countDown = 0;
};
bool Skip(uint8_t **pp, uint16_t *pcntdn, uint16_t bytes_to_skip)
{
switch (nStage)
{
case 0:
countDown = bytes_to_skip;
nStage ++;
case 1:
for (; countDown && (*pcntdn); countDown--, (*pp)++, (*pcntdn)--);
if (!countDown)
nStage = 0;
};
return (!countDown);
};
};
// Pointer to a callback function triggered for each element of PTP array when used with PTPArrayParser
typedef void (*PTP_ARRAY_EL_FUNC)(const MultiValueBuffer * const p, uint32_t count, const void *me);
class PTPListParser
{
public:
enum ParseMode { modeArray, modeRange/*, modeEnum*/ };
private:
uint8_t nStage;
uint8_t enStage;
uint32_t arLen;
uint32_t arLenCntdn;
uint8_t lenSize; // size of the array length field in bytes
uint8_t valSize; // size of the array element in bytes
MultiValueBuffer *pBuf;
// The only parser for both size and array element parsing
MultiByteValueParser theParser;
uint8_t /*ParseMode*/ prsMode;
public:
PTPListParser() :
pBuf(NULL),
nStage(0),
enStage(0),
arLenCntdn(0),
arLen(0),
lenSize(0),
valSize(0),
prsMode(modeArray)
{};
void Initialize(const uint8_t len_size, const uint8_t val_size, MultiValueBuffer * const p, const uint8_t mode = modeArray)
{
pBuf = p;
lenSize = len_size;
valSize = val_size;
prsMode = mode;
if (prsMode == modeRange)
{
arLenCntdn = arLen = 3;
nStage = 2;
}
else
{
arLenCntdn = arLen = 0;
nStage = 0;
}
enStage = 0;
theParser.Initialize(p);
};
bool Parse(uint8_t **pp, uint16_t *pcntdn, PTP_ARRAY_EL_FUNC pf, const void *me = NULL);
};
#endif // __PARSETOOLS_H__

62
printhex.h Normal file
View file

@ -0,0 +1,62 @@
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
#if !defined(__PRINTHEX_H__)
#define __PRINTHEX_H__
#include <WProgram.h>
template <class T>
void PrintHex(T val)
{
T mask = (((T)1) << (((sizeof(T) << 1) - 1) << 2));
while (mask > 1)
{
if (val < mask)
Serial.print("0");
mask >>= 4;
}
Serial.print((T)val, HEX);
}
template <class T>
void PrintHex2(Print *prn, T val)
{
T mask = (((T)1) << (((sizeof(T) << 1) - 1) << 2));
while (mask > 1)
{
if (val < mask)
prn->print("0");
mask >>= 4;
}
prn->print((T)val, HEX);
}
template <class T>
void PrintBin(T val)
{
for (T mask = (((T)1) << (sizeof(T) << 3)-1); mask; mask>>=1)
if (val & mask)
Serial.print("1");
else
Serial.print("0");
}
#endif // __PRINTHEX_H__

View file

@ -1,3 +1,19 @@
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
/* USB chapter 9 structures */
#ifndef _ch9_h_
#define _ch9_h_

View file

@ -1,3 +1,19 @@
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
/* MAX3421E-based USB Host Library header file */
#ifndef _USBHOST_H_
#define _USBHOST_H_
@ -66,10 +82,6 @@ MAX3421e< SS, INTR >::MAX3421e()
/* pin and peripheral setup */
SS::SetDirWrite();
SS::Set();
/* For shield rev.1.xx uncomment following two lines */
P7::SetDirWrite();
P7::Set();
spi::init();
INTR::SetDirRead();

View file

@ -1,3 +1,19 @@
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
#include "usbhub.h"
bool USBHub::bResetInitiated = false;

View file

@ -1,3 +1,19 @@
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
#if !defined(__USBHUB_H__)
#define __USBHUB_H__