compile faster

BTD.h

@@ -19,7 +19,6 @@
 #define _btd_h_
 
 #include "Usb.h"
-#include "confdescparser.h"
 
 //PID and VID of the Sony PS3 devices
 #define PS3_VID                 0x054C  // Sony Corporation

PS3USB.h

@@ -18,12 +18,6 @@
 #ifndef _ps3usb_h_
 #define _ps3usb_h_
 
-#if defined(ARDUINO) && ARDUINO >= 100
-#include "Arduino.h"
-#else
-#include "WProgram.h"
-#endif
-
 #include "Usb.h"
 #include "PS3Enums.h"
 
@@ -267,7 +261,7 @@ private:
          */
         void onInit();
         void (*pFuncOnInit)(void); // Pointer to function called in onInit()
-        
+
         bool bPollEnable;
 
         uint32_t timer; // used to continuously set PS3 Move controller Bulb and rumble values

Usb.h

@@ -22,11 +22,19 @@ e-mail   :  support@circuitsathome.com
 // Not used anymore?
 //#define USB_METHODS_INLINE
 //#include <assert.h>
+#include <inttypes.h>
+#include <stddef.h>
+#include <stdio.h>
 
 #include "settings.h"
-#include "address.h"
+#include "printhex.h"
-#include "usbhost.h"
 #include "message.h"
+#include "hexdump.h"
+#include "max3421e.h"
+#include "address.h"
+#include "avrpins.h"
+#include "usb_ch9.h"
+#include "usbhost.h"
 
 /* shield pins. First parameter - SS pin, second parameter - INT pin */
 #ifdef BOARD_BLACK_WIDDOW
@@ -268,4 +276,8 @@ inline uint8_t USB::setConf(uint8_t addr, uint8_t ep, uint8_t conf_value) {
 
 #endif // defined(USB_METHODS_INLINE)
 
+
+#include "parsetools.h"
+#include "confdescparser.h"
+
 #endif //_usb_h_

XBOXOLD.h

@@ -18,14 +18,8 @@
 #ifndef _xboxold_h_
 #define _xboxold_h_
 
-#if defined(ARDUINO) && ARDUINO >= 100
-#include "Arduino.h"
-#else
-#include "WProgram.h"
-#endif
-
 #include "Usb.h"
- #include "controllerEnums.h"
+#include "controllerEnums.h"
 
 /* Data Xbox taken from descriptors */
 #define EP_MAXPKTSIZE       32 // Max size for data via USB

XBOXRECV.h

@@ -20,12 +20,6 @@
 #ifndef _xboxrecv_h_
 #define _xboxrecv_h_
 
-#if defined(ARDUINO) && ARDUINO >= 100
-#include "Arduino.h"
-#else
-#include "WProgram.h"
-#endif
-
 #include "Usb.h"
 #include "xboxEnums.h"
 
@@ -135,7 +129,7 @@ public:
 
         /** @name Xbox Controller functions */
         /**
-         * Return the analog value from the joysticks on the controller.         
+         * Return the analog value from the joysticks on the controller.
          * @param  a          Either ::LeftHatX, ::LeftHatY, ::RightHatX or ::RightHatY.
          * @param  controller The controller to read from. Default to 0.
          * @return            Returns a signed 16-bit integer.
@@ -159,7 +153,7 @@ public:
                 setRumbleOn(0, 0, controller);
         };
         /**
-         * Turn rumble on.         
+         * Turn rumble on.
          * @param lValue     Left motor (big weight) inside the controller.
          * @param rValue     Right motor (small weight) inside the controller.
          * @param controller The controller to write to. Default to 0.
@@ -182,19 +176,19 @@ public:
                 setLedRaw(0, controller);
         };
         /**
-         * Turn on a LED by using the ::LED enum.         
+         * Turn on a LED by using the ::LED enum.
          * @param l          ::LED1, ::LED2, ::LED3 and ::LED4 is supported by the Xbox controller.
          * @param controller The controller to write to. Default to 0.
          */
         void setLedOn(LED l, uint8_t controller = 0);
         /**
-         * Turn on a LED by using the ::LED enum.         
+         * Turn on a LED by using the ::LED enum.
          * @param l          ::ALL, ::LED1, ::LED2, ::LED3 and ::LED4 is supported by the Xbox controller.
          * @param controller The controller to write to. Default to 0.
          */
         void setLedBlink(LED l, uint8_t controller = 0);
         /**
-         * Used to set special LED modes supported by the Xbox controller.         
+         * Used to set special LED modes supported by the Xbox controller.
          * @param lm         See ::LEDMode.
          * @param controller The controller to write to. Default to 0.
          */

XBOXUSB.h

@@ -18,12 +18,6 @@
 #ifndef _xboxusb_h_
 #define _xboxusb_h_
 
-#if defined(ARDUINO) && ARDUINO >= 100
-#include "Arduino.h"
-#else
-#include "WProgram.h"
-#endif
-
 #include "Usb.h"
 #include "xboxEnums.h"
 

address.h

@@ -14,12 +14,12 @@ Circuits At Home, LTD
 Web      :  http://www.circuitsathome.com
 e-mail   :  support@circuitsathome.com
  */
-#if !defined(__ADDRESS_H__)
+
+#if !defined(_usb_h_) || defined(__ADDRESS_H__)
+#error "Never include address.h directly; include Usb.h instead"
+#else
 #define __ADDRESS_H__
 
-#include <inttypes.h>
-#include <stddef.h>
-#include "max3421e.h"
 
 
 /* NAK powers. To save space in endpoint data structure, amount of retries before giving up and returning 0x4 is stored in */

adk.h

@@ -21,12 +21,6 @@ e-mail   :  support@circuitsathome.com
 #define _ADK_H_
 
 #include "Usb.h"
-#include <avr/pgmspace.h>
-
-#include "printhex.h"
-#include "hexdump.h"
-
-#include "confdescparser.h"
 
 #define ADK_VID   0x18D1
 #define ADK_PID   0x2D00

cdcacm.h

@@ -18,12 +18,6 @@ e-mail   :  support@circuitsathome.com
 #define __CDCACM_H__
 
 #include "Usb.h"
-#include <avr/pgmspace.h>
-
-#include "printhex.h"
-#include "hexdump.h"
-
-#include "confdescparser.h"
 
 #define bmREQ_CDCOUT        USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_INTERFACE
 #define bmREQ_CDCIN         USB_SETUP_DEVICE_TO_HOST|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_INTERFACE

cdcftdi.h

@@ -18,13 +18,6 @@ e-mail   :  support@circuitsathome.com
 #define __CDCFTDI_H__
 
 #include "Usb.h"
-#include <avr/pgmspace.h>
-#include "usbhost.h"
-
-#include "printhex.h"
-#include "hexdump.h"
-
-#include "confdescparser.h"
 
 #define bmREQ_FTDI_OUT  0x40
 #define bmREQ_FTDI_IN   0xc0

confdescparser.h

@@ -14,16 +14,12 @@ Circuits At Home, LTD
 Web      :  http://www.circuitsathome.com
 e-mail   :  support@circuitsathome.com
  */
-#if !defined(__CONFDESCPARSER_H__)
+#if !defined(_usb_h_) || defined(__CONFDESCPARSER_H__)
+#error "Never include confdescparser.h directly; include Usb.h instead"
+#else
+
 #define __CONFDESCPARSER_H__
 
-#include <inttypes.h>
-
-#include <avr/pgmspace.h>
-#include "message.h"
-#include "parsetools.h"
-
-//#include "hid.h"
 
 class UsbConfigXtracter {
 public:

hexdump.h

@@ -14,14 +14,11 @@ Circuits At Home, LTD
 Web      :  http://www.circuitsathome.com
 e-mail   :  support@circuitsathome.com
  */
-#if !defined(__HEXDUMP_H__)
+#if !defined(_usb_h_) || defined(__HEXDUMP_H__)
+#error "Never include hexdump.h directly; include Usb.h instead"
+#else
 #define __HEXDUMP_H__
 
-#include <inttypes.h>
-#include <avr/pgmspace.h>
-#include "printhex.h"
-#include "message.h"
-
 extern int UsbDEBUGlvl;
 
 template <class BASE_CLASS, class LEN_TYPE, class OFFSET_TYPE>

hid.h

@@ -18,12 +18,6 @@ e-mail   :  support@circuitsathome.com
 #define __HID_H__
 
 #include "Usb.h"
-#include <avr/pgmspace.h>
-
-#include "printhex.h"
-#include "hexdump.h"
-
-#include "confdescparser.h"
 #include "hidusagestr.h"
 
 #define DATA_SIZE_MASK           0x03

masstorage.h

@@ -7,8 +7,6 @@
 #endif
 
 #include "Usb.h"
-#include <avr/pgmspace.h>
-#include <confdescparser.h>
 
 #define bmREQ_MASSOUT       USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_INTERFACE
 #define bmREQ_MASSIN        USB_SETUP_DEVICE_TO_HOST|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_INTERFACE

max3421e.h

@@ -14,11 +14,14 @@ Circuits At Home, LTD
 Web      :  http://www.circuitsathome.com
 e-mail   :  support@circuitsathome.com
  */
-/* MAX3421E register/bit names and bitmasks */
+#if !defined(_usb_h_) || defined(_max3421e_h_)
+#error "Never include max3421e.h directly; include Usb.h instead"
+#else
 
-#ifndef _max3421e_h_
 #define _max3421e_h_
 
+/* MAX3421E register/bit names and bitmasks */
+
 /* Arduino pin definitions */
 /* pin numbers to port numbers */
 

max_LCD.cpp

@@ -15,17 +15,7 @@ Web      :  http://www.circuitsathome.com
 e-mail   :  support@circuitsathome.com
  */
 #include "max_LCD.h"
-#include "max3421e.h"
-
-#include <stdio.h>
 #include <string.h>
-#include <inttypes.h>
-
-#if defined(ARDUINO) && ARDUINO >=100
-#include "Arduino.h"
-#else
-#include <WProgram.h>
-#endif
 
 // pin definition and set/clear
 

max_LCD.h

@@ -21,9 +21,8 @@ e-mail   :  support@circuitsathome.com
 #ifndef _Max_LCD_h_
 #define _Max_LCD_h_
 
-#include <inttypes.h>
-#include "Print.h"
 #include "Usb.h"
+#include "Print.h"
 
 // commands
 #define LCD_CLEARDISPLAY		0x01

message.cpp

@@ -15,7 +15,7 @@ Web      :  http://www.circuitsathome.com
 e-mail   :  support@circuitsathome.com
  */
 
-#include "message.h"
+#include "Usb.h"
 // 0x80 is the default (i.e. trace) to turn off set this global to something lower.
 // this allows for 126 other debugging levels.
 // TO-DO: Allow assignment to a different serial port

message.h

@@ -14,16 +14,13 @@ Circuits At Home, LTD
 Web      :  http://www.circuitsathome.com
 e-mail   :  support@circuitsathome.com
  */
-#if !defined(__MESSAGE_H__)
+#if !defined(_usb_h_) || defined(__MESSAGE_H__)
+#error "Never include message.h directly; include Usb.h instead"
+#else
 #define __MESSAGE_H__
 
-#include "settings.h"
-#include <inttypes.h>
-#include <avr/pgmspace.h>
-
 extern int UsbDEBUGlvl;
 
-#include "printhex.h"
 void E_Notify(char const * msg, int lvl);
 void E_Notify(uint8_t b, int lvl);
 void E_NotifyStr(char const * msg, int lvl);
@@ -78,6 +75,6 @@ void ErrorMessage(char const * msg, ERROR_TYPE rcode = 0) {
 #endif
 }
 
-#include "hexdump.h"
+//#include "hexdump.h"
 
 #endif // __MESSAGE_H__

parsetools.cpp

@@ -14,7 +14,7 @@ Circuits At Home, LTD
 Web      :  http://www.circuitsathome.com
 e-mail   :  support@circuitsathome.com
  */
-#include "parsetools.h"
+#include "Usb.h"
 
 bool MultiByteValueParser::Parse(uint8_t **pp, uint16_t *pcntdn) {
         if (!pBuf) {

parsetools.h

@@ -14,20 +14,10 @@ Circuits At Home, LTD
 Web      :  http://www.circuitsathome.com
 e-mail   :  support@circuitsathome.com
  */
-#if !defined(__PARSETOOLS_H__)
+#if !defined(_usb_h_) || defined(__PARSETOOLS_H__)
-#define __PARSETOOLS_H__
+#error "Never include parsetools.h directly; include Usb.h instead"
-
-#include <inttypes.h>
-#include <avr/pgmspace.h>
-#include "message.h"
-//#include "printhex.h"
-//#include "hexdump.h"
-
-#if defined(ARDUINO) && ARDUINO >=100
-#include "Arduino.h"
 #else
-#include <WProgram.h>
+#define __PARSETOOLS_H__
-#endif
 
 struct MultiValueBuffer {
         uint8_t valueSize;

printhex.h

@@ -14,10 +14,11 @@ Circuits At Home, LTD
 Web      :  http://www.circuitsathome.com
 e-mail   :  support@circuitsathome.com
  */
-#if !defined(__PRINTHEX_H__)
-#define __PRINTHEX_H__
 
-#include "settings.h"
+#if !defined(_usb_h_) || defined(__PRINTHEX_H__)
+#error "Never include printhex.h directly; include Usb.h instead"
+#else
+#define __PRINTHEX_H__
 
 void E_Notifyc(char c, int lvl);
 

settings.h

@@ -33,9 +33,6 @@
 #endif
 
 
-
-
-
 ////////////////////////////////////////////////////////////////////////////////
 // AUTOMATIC Settings
 ////////////////////////////////////////////////////////////////////////////////
@@ -48,6 +45,7 @@
 #if defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
 #define BOARD_TEENSY_PLUS_PLUS
 #endif
+#include <avr/pgmspace.h>
 
 #endif	/* SETTINGS_H */
 

usb_ch9.h

@@ -18,8 +18,6 @@ e-mail   :  support@circuitsathome.com
 #ifndef _ch9_h_
 #define _ch9_h_
 
-#include <inttypes.h>
-
 /* Misc.USB constants */
 #define DEV_DESCR_LEN   18      //device descriptor length
 #define CONF_DESCR_LEN  9       //configuration descriptor length

usbhost.h

@@ -15,13 +15,13 @@ Web      :  http://www.circuitsathome.com
 e-mail   :  support@circuitsathome.com
  */
 /* MAX3421E-based USB Host Library header file */
-#ifndef _USBHOST_H_
+
+
+#if !defined(_usb_h_) || defined(_USBHOST_H_)
+#error "Never include usbhost.h directly; include Usb.h instead"
+#else
 #define _USBHOST_H_
 
-#include "avrpins.h"
-#include "max3421e.h"
-#include "usb_ch9.h"
-#include <stdio.h>
 /* SPI initialization */
 template< typename CLK, typename MOSI, typename MISO, typename SPI_SS > class SPi {
 public:

usbhub.h

@@ -18,7 +18,6 @@ e-mail   :  support@circuitsathome.com
 #define __USBHUB_H__
 
 #include "Usb.h"
-#include <avr/pgmspace.h>
 
 #define USB_DESCRIPTOR_HUB			0x09 // Hub descriptor type