Added attachOnInit

This will allow the user to call a function when the controller is initialized

PS3BT.cpp

@@ -516,25 +516,23 @@ void PS3BT::Run() {
                 case L2CAP_HID_PS3_LED:
                         if (millis() - timer > 1000) { // loop 1 second before sending the command
                                 if (remote_name[0] == 'P') { // First letter in PLAYSTATION(R)3 Controller ('P')
-                                        setLedOn(LED1);
 #ifdef DEBUG_USB_HOST
                                         Notify(PSTR("\r\nDualshock 3 Controller Enabled\r\n"), 0x80);
 #endif
                                         PS3Connected = true;
                                 } else if (remote_name[0] == 'N') { // First letter in Navigation Controller ('N')
-                                        setLedOn(LED1); // This just turns LED constantly on, on the Navigation controller
 #ifdef DEBUG_USB_HOST
                                         Notify(PSTR("\r\nNavigation Controller Enabled\r\n"), 0x80);
 #endif
                                         PS3NavigationConnected = true;
                                 } else if (remote_name[0] == 'M') { // First letter in Motion Controller ('M')
-                                        moveSetBulb(Red);
                                         timerBulbRumble = millis();
 #ifdef DEBUG_USB_HOST
                                         Notify(PSTR("\r\nMotion Controller Enabled\r\n"), 0x80);
 #endif
                                         PS3MoveConnected = true;
                                 }
+                                onInit(); // Turn on the LED on the controller
                                 l2cap_state = L2CAP_DONE;
                         }
                         break;
@@ -659,3 +657,14 @@ void PS3BT::moveSetRumble(uint8_t rumble) {
 
         HIDMove_Command(HIDMoveBuffer, HID_BUFFERSIZE);
 }
+
+void PS3BT::onInit() {
+        if (pFuncOnInit)
+                pFuncOnInit(); // Call the user function
+        else {
+                if (PS3MoveConnected)
+                        moveSetBulb(Red);
+                else // Dualshock 3 or Navigation controller
+                        setLedOn(LED1);
+        }
+}

PS3BT.h

@@ -207,19 +207,35 @@ public:
          * @param rumble The desired value in the range from 64-255.
          */
         void moveSetRumble(uint8_t rumble);
+
+        /**
+         * Used to call your own function when the controller is successfully initialized.
+         * @param funcOnInit Function to call.
+         */
+        void attachOnInit(void (*funcOnInit)(void)) {
+                pFuncOnInit = funcOnInit;
+        };
         /**@}*/
 
-        /** Variable used to indicate if the normal playstation controller is successfully connected. */
+        /** Variable used to indicate if the normal Playstation controller is successfully connected. */
         bool PS3Connected;
-        /** Variable used to indicate if the move controller is successfully connected. */
+        /** Variable used to indicate if the Move controller is successfully connected. */
         bool PS3MoveConnected;
-        /** Variable used to indicate if the navigation controller is successfully connected. */
+        /** Variable used to indicate if the Navigation controller is successfully connected. */
         bool PS3NavigationConnected;
 
 private:
-        /* mandatory members */
+        /* Mandatory members */
         BTD *pBtd;
 
+        /**
+         * Called when the controller is successfully initialized.
+         * Use attachOnInit(void (*funcOnInit)(void)) to call your own function.
+         * This is useful for instance if you want to set the LEDs in a specific way.
+         */
+        void onInit();
+        void (*pFuncOnInit)(void); // Pointer to function called in onInit()
+
         void L2CAP_task(); // L2CAP state machine
 
         /* Variables filled from HCI event management */
@@ -229,7 +245,7 @@ private:
 
         /* variables used by high level L2CAP task */
         uint8_t l2cap_state;
-        uint16_t l2cap_event_flag; // L2CAP flags of received bluetooth events
+        uint16_t l2cap_event_flag; // L2CAP flags of received Bluetooth events
 
         unsigned long timer;
 

PS3USB.cpp

@@ -183,10 +183,9 @@ uint8_t PS3USB::Init(uint8_t parent, uint8_t port, bool lowspeed) {
 #endif
                         PS3NavigationConnected = true;
                 }
-                /* Set internal bluetooth address and request for data */
+                /* Set internal Bluetooth address and request for data */
                 setBdaddr(my_bdaddr);
                 enable_sixaxis();
-                setLedOn(LED1);
 
                 // Needed for PS3 Dualshock and Navigation commands to work
                 for (uint8_t i = 0; i < PS3_REPORT_BUFFER_SIZE; i++)
@@ -199,12 +198,12 @@ uint8_t PS3USB::Init(uint8_t parent, uint8_t port, bool lowspeed) {
                 Notify(PSTR("\r\nMotion Controller Connected"), 0x80);
 #endif
                 PS3MoveConnected = true;
-                setMoveBdaddr(my_bdaddr); // Set internal bluetooth address
+                setMoveBdaddr(my_bdaddr); // Set internal Bluetooth address
-                moveSetBulb(Red);
+                
-
                 writeBuf[0] = 0x02; // Set report ID, this is needed for Move commands to work
         }
-
+        onInit();
+        
 #ifdef DEBUG_USB_HOST
         Notify(PSTR("\r\nBluetooth Address was set to: "), 0x80);
         for (int8_t i = 5; i > 0; i--) {
@@ -538,3 +537,14 @@ void PS3USB::setMoveBdaddr(uint8_t* BDADDR) {
         //bmRequest = Host to device (0x00) | Class (0x20) | Interface (0x01) = 0x21, bRequest = Set Report (0x09), Report ID (0x05), Report Type (Feature 0x03), interface (0x00), datalength, datalength, data)
         pUsb->ctrlReq(bAddress, epInfo[PS3_CONTROL_PIPE].epAddr, bmREQ_HID_OUT, HID_REQUEST_SET_REPORT, 0x05, 0x03, 0x00, 11, 11, buf, NULL);
 }
+
+void PS3USB::onInit() {
+        if (pFuncOnInit)
+                pFuncOnInit(); // Call the user function
+        else {
+                if (PS3MoveConnected)
+                        moveSetBulb(Red);
+                else // Dualshock 3 or Navigation controller
+                        setLedOn(LED1);
+        }
+}

PS3USB.h

@@ -224,6 +224,14 @@ public:
          * @param rumble The desired value in the range from 64-255.
          */
         void moveSetRumble(uint8_t rumble);
+
+        /**
+         * Used to call your own function when the controller is successfully initialized.
+         * @param funcOnInit Function to call.
+         */
+        void attachOnInit(void (*funcOnInit)(void)) {
+                pFuncOnInit = funcOnInit;
+        };
         /**@}*/
 
         /** Variable used to indicate if the normal playstation controller is successfully connected. */
@@ -242,6 +250,14 @@ protected:
         EpInfo epInfo[PS3_MAX_ENDPOINTS];
 
 private:
+        /**
+         * Called when the controller is successfully initialized.
+         * Use attachOnInit(void (*funcOnInit)(void)) to call your own function.
+         * This is useful for instance if you want to set the LEDs in a specific way.
+         */
+        void onInit();
+        void (*pFuncOnInit)(void); // Pointer to function called in onInit()
+        
         bool bPollEnable;
 
         uint32_t timer; // used to continuously set PS3 Move controller Bulb and rumble values

Wii.cpp

@@ -326,7 +326,7 @@ void WII::ACLData(uint8_t* l2capinbuf) {
 #endif
                                                                         nunchuckConnected = false; // It must be the Nunchuck controller then
                                                                         l2cap_event_flag &= ~WII_FLAG_NUNCHUCK_CONNECTED;
-                                                                        setLedStatus();
+                                                                        onInit();
                                                                         setReportMode(false, 0x31); // If there is no extension connected we will read the button and accelerometer
                                                                 } else {
                                                                         setReportMode(false, 0x31); // If there is no extension connected we will read the button and accelerometer
@@ -779,7 +779,7 @@ void WII::Run() {
                 case L2CAP_LED_STATE:
                         if (nunchuck_connected_flag)
                                 nunchuckConnected = true;
-                        setLedStatus();
+                        onInit();
                         l2cap_state = L2CAP_DONE;
                         break;
 
@@ -824,7 +824,7 @@ void WII::Run() {
                                 else if (stateCounter == 400)
                                         readExtensionType(); // Check if it has been activated
                                 else if (stateCounter == 450) {
-                                        //setLedStatus();
+                                        onInit();
                                         stateCounter = 0;
                                         unknownExtensionConnected = false;
                                 }
@@ -1062,6 +1062,14 @@ uint16_t WII::getAnalogHat(AnalogHat a) {
                         return output;
         }
 }
+
+void WII::onInit() {
+        if (pFuncOnInit)
+                pFuncOnInit(); // Call the user function
+        else
+                setLedStatus();
+}
+
 /************************************************************/
 /*       The following functions are for the IR camera      */
 /************************************************************/

Wii.h

@@ -233,6 +233,14 @@ public:
         uint8_t getWiiState() {
                 return wiiState;
         };
+
+        /**
+         * Used to call your own function when the controller is successfully initialized.
+         * @param funcOnInit Function to call.
+         */
+        void attachOnInit(void (*funcOnInit)(void)) {
+                pFuncOnInit = funcOnInit;
+        };
         /**@}*/
 
         /**@{*/
@@ -418,8 +426,15 @@ public:
 #endif
 
 private:
-        /* Mandatory members */
+        BTD *pBtd; // Pointer to BTD instance
-        BTD *pBtd;
+
+        /**
+         * Called when the controller is successfully initialized.
+         * Use attachOnInit(void (*funcOnInit)(void)) to call your own function.
+         * This is useful for instance if you want to set the LEDs in a specific way.
+         */
+        void onInit();
+        void (*pFuncOnInit)(void); // Pointer to function called in onInit()
 
         void L2CAP_task(); // L2CAP state machine
 
@@ -427,9 +442,9 @@ private:
         uint16_t hci_handle;
         bool activeConnection; // Used to indicate if it's already has established a connection
 
-        /* variables used by high level L2CAP task */
+        /* Variables used by high level L2CAP task */
         uint8_t l2cap_state;
-        uint16_t l2cap_event_flag; // l2cap flags of received bluetooth events
+        uint16_t l2cap_event_flag; // l2cap flags of received Bluetooth events
 
         uint32_t ButtonState;
         uint32_t OldButtonState;

XBOXRECV.cpp

@@ -310,7 +310,7 @@ void XBOXRECV::readReport(uint8_t controller) {
 #endif
                 if (Xbox360Connected[controller]) {
 #ifdef DEBUG_USB_HOST
-                        char* str = 0;
+                        const char* str = 0;
                         switch (readBuf[1]) {
                                 case 0x80: str = PSTR(" as controller\r\n");
                                         break;
@@ -322,18 +322,7 @@ void XBOXRECV::readReport(uint8_t controller) {
                         Notify(PSTR(": connected"), 0x80);
                         Notify(str, 0x80);
 #endif
-                        LED led;
+                        onInit(controller);
-                        switch (controller) {
-                                case 0: led = LED1;
-                                        break;
-                                case 1: led = LED2;
-                                        break;
-                                case 2: led = LED3;
-                                        break;
-                                case 3: led = LED4;
-                                        break;
-                        }
-                        setLedOn(led, controller);
                 }
 #ifdef DEBUG_USB_HOST
                 else
@@ -529,3 +518,20 @@ void XBOXRECV::setRumbleOn(uint8_t lValue, uint8_t rValue, uint8_t controller) {
 
         XboxCommand(controller, writeBuf, 7);
 }
+
+void XBOXRECV::onInit(uint8_t controller) {
+        if (pFuncOnInit)
+                pFuncOnInit(); // Call the user function
+        else {
+                LED led;
+                if (controller == 0)
+                    led = LED1;
+                else if (controller == 1)
+                    led = LED2;
+                if (controller == 2)
+                    led = LED3;
+                else
+                    led = LED4;
+                setLedOn(led, controller);
+        }
+}

XBOXRECV.h

@@ -200,6 +200,14 @@ public:
          * @return            True if a button has changed.
          */
         bool buttonChanged(uint8_t controller = 0);
+
+        /**
+         * Used to call your own function when the controller is successfully initialized.
+         * @param funcOnInit Function to call.
+         */
+        void attachOnInit(void (*funcOnInit)(void)) {
+                pFuncOnInit = funcOnInit;
+        };
         /**@}*/
 
         /** True if a wireless receiver is connected. */
@@ -216,6 +224,15 @@ protected:
         EpInfo epInfo[XBOX_MAX_ENDPOINTS];
 
 private:
+        /**
+         * Called when the controller is successfully initialized.
+         * Use attachOnInit(void (*funcOnInit)(void)) to call your own function.
+         * This is useful for instance if you want to set the LEDs in a specific way.
+         * @param controller The initialized controller.
+         */
+        void onInit(uint8_t controller);
+        void (*pFuncOnInit)(void); // Pointer to function called in onInit()
+
         bool bPollEnable;
 
         /* Variables to store the buttons */

XBOXUSB.cpp

@@ -167,7 +167,7 @@ uint8_t XBOXUSB::Init(uint8_t parent, uint8_t port, bool lowspeed) {
         if (rcode)
                 goto FailSetDevTblEntry;
 
-        delay(200); //Give time for address change
+        delay(200); // Give time for address change
 
         rcode = pUsb->setConf(bAddress, epInfo[ XBOX_CONTROL_PIPE ].epAddr, 1);
         if (rcode)
@@ -176,12 +176,12 @@ uint8_t XBOXUSB::Init(uint8_t parent, uint8_t port, bool lowspeed) {
 #ifdef DEBUG_USB_HOST
         Notify(PSTR("\r\nXbox 360 Controller Connected\r\n"), 0x80);
 #endif
-        setLedOn(LED1);
+        onInit();
         Xbox360Connected = true;
         bPollEnable = true;
-        return 0; // successful configuration
+        return 0; // Successful configuration
 
-        /* diagnostic messages */
+        /* Diagnostic messages */
 FailGetDevDescr:
 #ifdef DEBUG_USB_HOST
         NotifyFailGetDevDescr();
@@ -345,3 +345,10 @@ void XBOXUSB::setRumbleOn(uint8_t lValue, uint8_t rValue) {
 
         XboxCommand(writeBuf, 8);
 }
+
+void XBOXUSB::onInit() {
+        if (pFuncOnInit)
+                pFuncOnInit(); // Call the user function
+        else
+                setLedOn(LED1);
+}

XBOXUSB.h

@@ -168,6 +168,14 @@ public:
          * @param lm         See ::LEDMode.
          */
         void setLedMode(LEDMode lm);
+
+        /**
+         * Used to call your own function when the controller is successfully initialized.
+         * @param funcOnInit Function to call.
+         */
+        void attachOnInit(void (*funcOnInit)(void)) {
+                pFuncOnInit = funcOnInit;
+        };
         /**@}*/
 
         /** True if a Xbox 360 controller is connected. */
@@ -182,6 +190,14 @@ protected:
         EpInfo epInfo[XBOX_MAX_ENDPOINTS];
 
 private:
+        /**
+         * Called when the controller is successfully initialized.
+         * Use attachOnInit(void (*funcOnInit)(void)) to call your own function.
+         * This is useful for instance if you want to set the LEDs in a specific way.
+         */
+        void onInit();
+        void (*pFuncOnInit)(void); // Pointer to function called in onInit()
+
         bool bPollEnable;
 
         /* Variables to store the buttons */

keywords.txt

@@ -56,6 +56,8 @@ setLedToggle	KEYWORD2
 moveSetBulb	KEYWORD2
 moveSetRumble	KEYWORD2
 
+attachOnInit	KEYWORD2
+
 PS3Connected	KEYWORD2
 PS3MoveConnected	KEYWORD2
 PS3NavigationConnected	KEYWORD2