Add new header files.

macros.h

@@ -0,0 +1,57 @@
+/*
+ * File:   macros.h
+ * Author: AJK
+ *
+ * Created on September 23, 2013, 12:31 AM
+ */
+
+#ifndef MACROS_H
+#define	MACROS_H
+
+////////////////////////////////////////////////////////////////////////////////
+// HANDY MACROS
+////////////////////////////////////////////////////////////////////////////////
+
+#define SWAP(a, b) (((a) ^= (b)), ((b) ^= (a)), ((a) ^= (b)))
+#ifndef __BYTE_GRABBING_DEFINED__
+#define __BYTE_GRABBING_DEFINED__ 1
+#ifdef BROKEN_OPTIMIZER_LITTLE_ENDIAN
+// Note: Use this if your compiler generates horrible assembler!
+#define BGRAB0(__usi__)  (((uint8_t *)&(__usi__))[0])
+#define BGRAB1(__usi__)  (((uint8_t *)&(__usi__))[1])
+#define BGRAB2(__usi__)  (((uint8_t *)&(__usi__))[2])
+#define BGRAB3(__usi__)  (((uint8_t *)&(__usi__))[3])
+#define BGRAB4(__usi__)  (((uint8_t *)&(__usi__))[4])
+#define BGRAB5(__usi__)  (((uint8_t *)&(__usi__))[5])
+#define BGRAB6(__usi__)  (((uint8_t *)&(__usi__))[6])
+#define BGRAB7(__usi__)  (((uint8_t *)&(__usi__))[7])
+#else
+// Note: The cast alone to uint8_t is actually enough.
+// GCC throws out the "& 0xff", and the size is no different.
+// Some compilers need it.
+#define BGRAB0(__usi__)  ((uint8_t)((__usi__) & 0xff ))
+#define BGRAB1(__usi__)  ((uint8_t)(((__usi__) >> 8) & 0xff))
+#define BGRAB2(__usi__)  ((uint8_t)(((__usi__) >> 16) & 0xff))
+#define BGRAB3(__usi__)  ((uint8_t)(((__usi__) >> 24) & 0xff))
+#define BGRAB4(__usi__)  ((uint8_t)(((__usi__) >> 32) & 0xff))
+#define BGRAB5(__usi__)  ((uint8_t)(((__usi__) >> 40) & 0xff))
+#define BGRAB6(__usi__)  ((uint8_t)(((__usi__) >> 48) & 0xff))
+#define BGRAB7(__usi__)  ((uint8_t)(((__usi__) >> 56) & 0xff))
+#endif
+#define BOVER1(__usi__)  ((uint16_t)(__usi__) << 8)
+#define BOVER2(__usi__)  ((uint32_t)(__usi__) << 16)
+#define BOVER3(__usi__)  ((uint32_t)(__usi__) << 24)
+#define BOVER4(__usi__)  ((uint64_t)(__usi__) << 32)
+#define BOVER5(__usi__)  ((uint64_t)(__usi__) << 40)
+#define BOVER6(__usi__)  ((uint64_t)(__usi__) << 48)
+#define BOVER7(__usi__)  ((uint64_t)(__usi__) << 56)
+
+// These are the smallest and fastest ways I have found so far in pure C/C++.
+#define BMAKE16(__usc1__,__usc0__) ((uint16_t)((uint16_t)(__usc0__) | (uint16_t)BOVER1(__usc1__)))
+#define BMAKE32(__usc3__,__usc2__,__usc1__,__usc0__) ((uint32_t)((uint32_t)(__usc0__) | (uint32_t)BOVER1(__usc1__) | (uint32_t)BOVER2(__usc2__) | (uint32_t)BOVER3(__usc3__)))
+#define BMAKE64(__usc7__,__usc6__,__usc5__,__usc4__,__usc3__,__usc2__,__usc1__,__usc0__) ((uint64_t)((uint64_t)__usc0__ | (uint64_t)BOVER1(__usc1__) | (uint64_t)BOVER2(__usc2__) | (uint64_t)BOVER3(__usc3__) | (uint64_t)BOVER4(__usc4__) | (uint64_t)BOVER5(__usc5__) | (uint64_t)BOVER6(__usc6__) | (uint64_t)BOVER1(__usc7__)))
+#endif
+
+
+#endif	/* MACROS_H */
+

settings.h

@@ -0,0 +1,53 @@
+/*
+ * File:   settings.h
+ * Author: AJK
+ *
+ * Created on September 23, 2013, 12:00 AM
+ */
+
+#ifndef SETTINGS_H
+#define	SETTINGS_H
+#include "macros.h"
+
+
+////////////////////////////////////////////////////////////////////////////////
+// CORE
+////////////////////////////////////////////////////////////////////////////////
+//#define BOARD_BLACK_WIDDOW
+// uncomment to activate
+//#define DEBUG_USB_HOST
+
+#ifndef USB_HOST_SERIAL
+#define USB_HOST_SERIAL Serial
+#endif
+
+
+////////////////////////////////////////////////////////////////////////////////
+// MASS STORAGE
+////////////////////////////////////////////////////////////////////////////////
+// <<<<<<<<<<<<<<<< IMPORTANT >>>>>>>>>>>>>>>
+// Set this to 1 to support single LUN devices, and save RAM. -- I.E. thumb drives.
+// Each LUN needs ~13 bytes to be able to track the state of each unit.
+#ifndef MASS_MAX_SUPPORTED_LUN
+#define MASS_MAX_SUPPORTED_LUN 8
+#endif
+
+
+
+
+
+////////////////////////////////////////////////////////////////////////////////
+// AUTOMATIC Settings
+////////////////////////////////////////////////////////////////////////////////
+#if defined(ARDUINO) && ARDUINO >=100
+#include "Arduino.h"
+#else
+#include <WProgram.h>
+#endif
+
+#if defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
+#define BOARD_TEENSY_PLUS_PLUS
+#endif
+
+#endif	/* SETTINGS_H */
+