specchioriflesso/USB_Host_Shield_2.0
1
Fork 0
mirror of https://github.com/felis/USB_Host_Shield_2.0.git synced 2024-03-22 11:31:26 +01:00
Code Issues Projects Releases Packages Wiki Activity

Explicit cast millis() and micros() to uint32_t, as it is uint64_t on the Arduino 101

Browse source
This commit is contained in:
Kristian Sloth Lauszus 2017-02-12 16:58:14 +01:00
parent 6fb48f48e4
commit 42948831ce
29 changed files with 95 additions and 124 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
BTD.cpp
View file

@ -384,8 +384,8 @@ uint8_t BTD::Release() {
uint8_t BTD::Poll() {
if(!bPollEnable)
return 0;
if((int32_t)(millis() - qNextPollTime) >= 0L) { // Don't poll if shorter than polling interval
qNextPollTime = millis() + pollInterval; // Set new poll time
if((int32_t)((uint32_t)millis() - qNextPollTime) >= 0L) { // Don't poll if shorter than polling interval
qNextPollTime = (uint32_t)millis() + pollInterval; // Set new poll time
HCI_event_task(); // Poll the HCI event pipe
HCI_task(); // HCI state machine
ACL_event_task(); // Poll the ACL input pipe too

28
PS3BT.cpp
View file

@ -339,7 +339,7 @@ void PS3BT::ACLData(uint8_t* ACLData) {
if(PS3Connected || PS3MoveConnected || PS3NavigationConnected) {
/* Read Report */
if(l2capinbuf[8] == 0xA1) { // HID_THDR_DATA_INPUT
lastMessageTime = millis(); // Store the last message time
lastMessageTime = (uint32_t)millis(); // Store the last message time
if(PS3Connected || PS3NavigationConnected)
ButtonState = (uint32_t)(l2capinbuf[11] | ((uint16_t)l2capinbuf[12] << 8) | ((uint32_t)l2capinbuf[13] << 16));
@ -420,7 +420,7 @@ void PS3BT::L2CAP_task() {
l2cap_state = TURN_ON_LED;
} else
l2cap_state = PS3_ENABLE_SIXAXIS;
timer = millis();
timer = (uint32_t)millis();
}
break;
@ -454,18 +454,18 @@ void PS3BT::L2CAP_task() {
void PS3BT::Run() {
switch(l2cap_state) {
case PS3_ENABLE_SIXAXIS:
if((int32_t)(millis() - timer) > 1000) { // loop 1 second before sending the command
if((int32_t)((uint32_t)millis() - timer) > 1000) { // loop 1 second before sending the command
memset(l2capinbuf, 0, BULK_MAXPKTSIZE); // Reset l2cap in buffer as it sometimes read it as a button has been pressed
for(uint8_t i = 15; i < 19; i++)
l2capinbuf[i] = 0x7F; // Set the analog joystick values to center position
enable_sixaxis();
l2cap_state = TURN_ON_LED;
timer = millis();
timer = (uint32_t)millis();
}
break;
case TURN_ON_LED:
if((int32_t)(millis() - timer) > 1000) { // loop 1 second before sending the command
if((int32_t)((uint32_t)millis() - timer) > 1000) { // loop 1 second before sending the command
if(remote_name_first == 'P') { // First letter in PLAYSTATION(R)3 Controller ('P')
#ifdef DEBUG_USB_HOST
Notify(PSTR("\r\nDualshock 3 Controller Enabled\r\n"), 0x80);
@ -477,7 +477,7 @@ void PS3BT::Run() {
#endif
PS3NavigationConnected = true;
} else if(remote_name_first == 'M') { // First letter in Motion Controller ('M')
timer = millis();
timer = (uint32_t)millis();
#ifdef DEBUG_USB_HOST
Notify(PSTR("\r\nMotion Controller Enabled\r\n"), 0x80);
#endif
@ -494,9 +494,9 @@ void PS3BT::Run() {
case L2CAP_DONE:
if(PS3MoveConnected) { // The Bulb and rumble values, has to be send at approximately every 5th second for it to stay on
if((int32_t)(millis() - timer) > 4000) { // Send at least every 4th second
if((int32_t)((uint32_t)millis() - timer) > 4000) { // Send at least every 4th second
HIDMove_Command(HIDMoveBuffer, HID_BUFFERSIZE); // The Bulb and rumble values, has to be written again and again, for it to stay turned on
timer = millis();
timer = (uint32_t)millis();
}
}
break;
@ -510,10 +510,10 @@ void PS3BT::Run() {
// Playstation Sixaxis Dualshock and Navigation Controller commands
void PS3BT::HID_Command(uint8_t* data, uint8_t nbytes) {
if((int32_t)(millis() - timerHID) <= 150) // Check if is has been more than 150ms since last command
delay((uint32_t)(150 - (millis() - timerHID))); // There have to be a delay between commands
if((int32_t)((uint32_t)millis() - timerHID) <= 150) // Check if is has been more than 150ms since last command
delay((uint32_t)(150 - ((uint32_t)millis() - timerHID))); // There have to be a delay between commands
pBtd->L2CAP_Command(hci_handle, data, nbytes, control_scid[0], control_scid[1]); // Both the Navigation and Dualshock controller sends data via the control channel
timerHID = millis();
timerHID = (uint32_t)millis();
}
void PS3BT::setAllOff() {
@ -595,10 +595,10 @@ void PS3BT::enable_sixaxis() { // Command used to enable the Dualshock 3 and Nav
// Playstation Move Controller commands
void PS3BT::HIDMove_Command(uint8_t* data, uint8_t nbytes) {
if((int32_t)(millis() - timerHID) <= 150)// Check if is has been less than 150ms since last command
delay((uint32_t)(150 - (millis() - timerHID))); // There have to be a delay between commands
if((int32_t)((uint32_t)millis() - timerHID) <= 150)// Check if is has been less than 150ms since last command
delay((uint32_t)(150 - ((uint32_t)millis() - timerHID))); // There have to be a delay between commands
pBtd->L2CAP_Command(hci_handle, data, nbytes, interrupt_scid[0], interrupt_scid[1]); // The Move controller sends it's data via the intterrupt channel
timerHID = millis();
timerHID = (uint32_t)millis();
}
void PS3BT::moveSetBulb(uint8_t r, uint8_t g, uint8_t b) { // Use this to set the Color using RGB values

8
PS3USB.cpp
View file

@ -221,7 +221,7 @@ uint8_t PS3USB::Init(uint8_t parent, uint8_t port, bool lowspeed) {
bPollEnable = true;
Notify(PSTR("\r\n"), 0x80);
timer = millis();
timer = (uint32_t)millis();
return 0; // Successful configuration
/* Diagnostic messages */
@ -276,16 +276,16 @@ uint8_t PS3USB::Poll() {
if(PS3Connected || PS3NavigationConnected) {
uint16_t BUFFER_SIZE = EP_MAXPKTSIZE;
pUsb->inTransfer(bAddress, epInfo[ PS3_INPUT_PIPE ].epAddr, &BUFFER_SIZE, readBuf); // input on endpoint 1
if((int32_t)(millis() - timer) > 100) { // Loop 100ms before processing data
if((int32_t)((uint32_t)millis() - timer) > 100) { // Loop 100ms before processing data
readReport();
#ifdef PRINTREPORT
printReport(); // Uncomment "#define PRINTREPORT" to print the report send by the PS3 Controllers
#endif
}
} else if(PS3MoveConnected) { // One can only set the color of the bulb, set the rumble, set and get the bluetooth address and calibrate the magnetometer via USB
if((int32_t)(millis() - timer) > 4000) { // Send at least every 4th second
if((int32_t)((uint32_t)millis() - timer) > 4000) { // Send at least every 4th second
Move_Command(writeBuf, MOVE_REPORT_BUFFER_SIZE); // The Bulb and rumble values, has to be written again and again, for it to stay turned on
timer = millis();
timer = (uint32_t)millis();
}
}
return 0;

4
SPP.cpp
View file

@ -370,7 +370,7 @@ void SPP::ACLData(uint8_t* l2capinbuf) {
#endif
sendRfcommCredit(rfcommChannelConnection, rfcommDirection, 0, RFCOMM_UIH, 0x10, sizeof (rfcommDataBuffer)); // Send credit
creditSent = true;
timer = millis();
timer = (uint32_t)millis();
waitForLastCommand = true;
}
} else if(rfcommChannelType == RFCOMM_UIH && l2capinbuf[10] == 0x01) { // UIH Command with credit
@ -421,7 +421,7 @@ void SPP::ACLData(uint8_t* l2capinbuf) {
}
void SPP::Run() {
if(waitForLastCommand && (int32_t)(millis() - timer) > 100) { // We will only wait 100ms and see if the UIH Remote Port Negotiation Command is send, as some deviced don't send it
if(waitForLastCommand && (int32_t)((uint32_t)millis() - timer) > 100) { // We will only wait 100ms and see if the UIH Remote Port Negotiation Command is send, as some deviced don't send it
#ifdef DEBUG_USB_HOST
Notify(PSTR("\r\nRFCOMM Connection is now established - Automatic\r\n"), 0x80);
#endif

22
Usb.cpp
View file

@ -313,7 +313,7 @@ uint8_t USB::OutTransfer(EpInfo *pep, uint16_t nak_limit, uint16_t nbytes, uint8
if(maxpktsize < 1 || maxpktsize > 64)
return USB_ERROR_INVALID_MAX_PKT_SIZE;
uint32_t timeout = millis() + USB_XFER_TIMEOUT;
uint32_t timeout = (uint32_t)millis() + USB_XFER_TIMEOUT;
regWr(rHCTL, (pep->bmSndToggle) ? bmSNDTOG1 : bmSNDTOG0); //set toggle value
@ -328,7 +328,7 @@ uint8_t USB::OutTransfer(EpInfo *pep, uint16_t nak_limit, uint16_t nbytes, uint8
regWr(rHIRQ, bmHXFRDNIRQ); //clear IRQ
rcode = (regRd(rHRSL) & 0x0f);
while(rcode && ((int32_t)(millis() - timeout) < 0L)) {
while(rcode && ((int32_t)((uint32_t)millis() - timeout) < 0L)) {
switch(rcode) {
case hrNAK:
nak_count++;
@ -375,17 +375,17 @@ breakout:
/* return codes 0x00-0x0f are HRSLT( 0x00 being success ), 0xff means timeout */
uint8_t USB::dispatchPkt(uint8_t token, uint8_t ep, uint16_t nak_limit) {
uint32_t timeout = millis() + USB_XFER_TIMEOUT;
uint32_t timeout = (uint32_t)millis() + USB_XFER_TIMEOUT;
uint8_t tmpdata;
uint8_t rcode = hrSUCCESS;
uint8_t retry_count = 0;
uint16_t nak_count = 0;
while((int32_t)(millis() - timeout) < 0L) {
while((int32_t)((uint32_t)millis() - timeout) < 0L) {
regWr(rHXFR, (token | ep)); //launch the transfer
rcode = USB_ERROR_TRANSFER_TIMEOUT;
while((int32_t)(millis() - timeout) < 0L) //wait for transfer completion
while((int32_t)((uint32_t)millis() - timeout) < 0L) //wait for transfer completion
{
tmpdata = regRd(rHIRQ);
@ -451,7 +451,7 @@ void USB::Task(void) //USB state machine
//intentional fallthrough
case FSHOST: //attached
if((usb_task_state & USB_STATE_MASK) == USB_STATE_DETACHED) {
delay = millis() + USB_SETTLE_DELAY;
delay = (uint32_t)millis() + USB_SETTLE_DELAY;
usb_task_state = USB_ATTACHED_SUBSTATE_SETTLE;
}
break;
@ -476,7 +476,7 @@ void USB::Task(void) //USB state machine
case USB_DETACHED_SUBSTATE_ILLEGAL: //just sit here
break;
case USB_ATTACHED_SUBSTATE_SETTLE: //settle time for just attached device
if((int32_t)(millis() - delay) >= 0L)
if((int32_t)((uint32_t)millis() - delay) >= 0L)
usb_task_state = USB_ATTACHED_SUBSTATE_RESET_DEVICE;
else break; // don't fall through
case USB_ATTACHED_SUBSTATE_RESET_DEVICE:
@ -488,22 +488,22 @@ void USB::Task(void) //USB state machine
tmpdata = regRd(rMODE) | bmSOFKAENAB; //start SOF generation
regWr(rMODE, tmpdata);
usb_task_state = USB_ATTACHED_SUBSTATE_WAIT_SOF;
//delay = millis() + 20; //20ms wait after reset per USB spec
//delay = (uint32_t)millis() + 20; //20ms wait after reset per USB spec
}
break;
case USB_ATTACHED_SUBSTATE_WAIT_SOF: //todo: change check order
if(regRd(rHIRQ) & bmFRAMEIRQ) {
//when first SOF received _and_ 20ms has passed we can continue
/*
if (delay < millis()) //20ms passed
if (delay < (uint32_t)millis()) //20ms passed
usb_task_state = USB_STATE_CONFIGURING;
*/
usb_task_state = USB_ATTACHED_SUBSTATE_WAIT_RESET;
delay = millis() + 20;
delay = (uint32_t)millis() + 20;
}
break;
case USB_ATTACHED_SUBSTATE_WAIT_RESET:
if((int32_t)(millis() - delay) >= 0L) usb_task_state = USB_STATE_CONFIGURING;
if((int32_t)((uint32_t)millis() - delay) >= 0L) usb_task_state = USB_STATE_CONFIGURING;
else break; // don't fall through
case USB_STATE_CONFIGURING:

26
Wii.cpp
View file

@ -121,9 +121,9 @@ void WII::disconnect() { // Use this void to disconnect any of the controllers
#endif
initExtension1(); // This will disable the Motion Plus extension
}
timer = millis() + 1000; // We have to wait for the message before the rest of the channels can be deactivated
timer = (uint32_t)millis() + 1000; // We have to wait for the message before the rest of the channels can be deactivated
} else
timer = millis(); // Don't wait
timer = (uint32_t)millis(); // Don't wait
// First the HID interrupt channel has to be disconnected, then the HID control channel and finally the HCI connection
pBtd->l2cap_disconnection_request(hci_handle, ++identifier, interrupt_scid, interrupt_dcid);
Reset();
@ -522,13 +522,13 @@ void WII::ACLData(uint8_t* l2capinbuf) {
if(!(l2capinbuf[19] & 0x02)) // Check if fast mode is used
rollGyroSpeed *= 4.545;
compPitch = (0.93f * (compPitch + (pitchGyroSpeed * (float)(micros() - timer) / 1000000.0f)))+(0.07f * getWiimotePitch()); // Use a complimentary filter to calculate the angle
compRoll = (0.93f * (compRoll + (rollGyroSpeed * (float)(micros() - timer) / 1000000.0f)))+(0.07f * getWiimoteRoll());
compPitch = (0.93f * (compPitch + (pitchGyroSpeed * (float)((uint32_t)micros() - timer) / 1000000.0f)))+(0.07f * getWiimotePitch()); // Use a complimentary filter to calculate the angle
compRoll = (0.93f * (compRoll + (rollGyroSpeed * (float)((uint32_t)micros() - timer) / 1000000.0f)))+(0.07f * getWiimoteRoll());
gyroYaw += (yawGyroSpeed * ((float)(micros() - timer) / 1000000.0f));
gyroRoll += (rollGyroSpeed * ((float)(micros() - timer) / 1000000.0f));
gyroPitch += (pitchGyroSpeed * ((float)(micros() - timer) / 1000000.0f));
timer = micros();
gyroYaw += (yawGyroSpeed * ((float)((uint32_t)micros() - timer) / 1000000.0f));
gyroRoll += (rollGyroSpeed * ((float)((uint32_t)micros() - timer) / 1000000.0f));
gyroPitch += (pitchGyroSpeed * ((float)((uint32_t)micros() - timer) / 1000000.0f));
timer = (uint32_t)micros();
/*
// Uncomment these lines to tune the gyro scale variabels
Notify(PSTR("\r\ngyroYaw: "), 0x80);
@ -545,7 +545,7 @@ void WII::ACLData(uint8_t* l2capinbuf) {
Notify(wiimotePitch, 0x80);
*/
} else {
if((int32_t)(micros() - timer) > 1000000) { // Loop for 1 sec before resetting the values
if((int32_t)((uint32_t)micros() - timer) > 1000000) { // Loop for 1 sec before resetting the values
#ifdef DEBUG_USB_HOST
Notify(PSTR("\r\nThe gyro values has been reset"), 0x80);
#endif
@ -562,7 +562,7 @@ void WII::ACLData(uint8_t* l2capinbuf) {
gyroPitch = 0;
motionValuesReset = true;
timer = micros();
timer = (uint32_t)micros();
}
}
} else {
@ -698,7 +698,7 @@ void WII::L2CAP_task() {
/* The next states are in run() */
case L2CAP_INTERRUPT_DISCONNECT:
if(l2cap_check_flag(L2CAP_FLAG_DISCONNECT_INTERRUPT_RESPONSE) && ((int32_t)(millis() - timer) >= 0L)) {
if(l2cap_check_flag(L2CAP_FLAG_DISCONNECT_INTERRUPT_RESPONSE) && ((int32_t)((uint32_t)millis() - timer) >= 0L)) {
#ifdef DEBUG_USB_HOST
Notify(PSTR("\r\nDisconnected Interrupt Channel"), 0x80);
#endif
@ -723,7 +723,7 @@ void WII::L2CAP_task() {
}
void WII::Run() {
if(l2cap_state == L2CAP_INTERRUPT_DISCONNECT && ((int32_t)(millis() - timer) >= 0L))
if(l2cap_state == L2CAP_INTERRUPT_DISCONNECT && ((int32_t)((uint32_t)millis() - timer) >= 0L))
L2CAP_task(); // Call the rest of the disconnection routine after we have waited long enough
switch(l2cap_state) {
@ -765,7 +765,7 @@ void WII::Run() {
if(wii_check_flag(WII_FLAG_MOTION_PLUS_CONNECTED)) {
stateCounter = 0;
l2cap_state = WII_INIT_MOTION_PLUS_STATE;
timer = micros();
timer = (uint32_t)micros();
if(unknownExtensionConnected) {
#ifdef DEBUG_USB_HOST

4
XBOXRECV.cpp
View file

@ -293,8 +293,8 @@ uint8_t XBOXRECV::Release() {
uint8_t XBOXRECV::Poll() {
if(!bPollEnable)
return 0;
if(!checkStatusTimer || ((int32_t)(millis() - checkStatusTimer) > 3000)) { // Run checkStatus every 3 seconds
checkStatusTimer = millis();
if(!checkStatusTimer || ((int32_t)((uint32_t)millis() - checkStatusTimer) > 3000)) { // Run checkStatus every 3 seconds
checkStatusTimer = (uint32_t)millis();
checkStatus();
}

4
cdcftdi.cpp
View file

@ -261,11 +261,11 @@ uint8_t FTDI::Poll() {
//if (!bPollEnable)
// return 0;
//if (qNextPollTime <= millis())
//if (qNextPollTime <= (uint32_t)millis())
//{
// USB_HOST_SERIAL.println(bAddress, HEX);
// qNextPollTime = millis() + 100;
// qNextPollTime = (uint32_t)millis() + 100;
//}
return rcode;
}

4
cdcprolific.cpp
View file

@ -237,11 +237,11 @@ Fail:
// //if (!bPollEnable)
// // return 0;
//
// //if (qNextPollTime <= millis())
// //if (qNextPollTime <= (uint32_t)millis())
// //{
// // USB_HOST_SERIAL.println(bAddress, HEX);
//
// // qNextPollTime = millis() + 100;
// // qNextPollTime = (uint32_t)millis() + 100;
// //}
// return rcode;
//}

4
examples/HID/SRWS1/SRWS1.ino
View file

@ -33,8 +33,8 @@ void loop() {
Serial.println(srw1.srws1Data.tilt);
} else { // Show strobe light effect
static uint32_t timer;
if ((int32_t)(millis() - timer) > 12) {
timer = millis(); // Reset timer
if ((int32_t)((uint32_t)millis() - timer) > 12) {
timer = (uint32_t)millis(); // Reset timer
static uint16_t leds = 0;
//PrintHex<uint16_t > (leds, 0x80); Serial.println();

4
examples/HID/USBHIDBootKbd/USBHIDBootKbd.ino
View file

@ -100,8 +100,6 @@ USB Usb;
//USBHub Hub(&Usb);
HIDBoot<USB_HID_PROTOCOL_KEYBOARD> HidKeyboard(&Usb);
uint32_t next_time;
KbdRptParser Prs;
void setup()
@ -117,8 +115,6 @@ void setup()
delay( 200 );
next_time = millis() + 5000;
HidKeyboard.SetReportParser(0, &Prs);
}

4
examples/HID/USBHIDBootKbdAndMouse/USBHIDBootKbdAndMouse.ino
View file

@ -145,8 +145,6 @@ HIDBoot < USB_HID_PROTOCOL_KEYBOARD | USB_HID_PROTOCOL_MOUSE > HidComposite(&Usb
HIDBoot<USB_HID_PROTOCOL_KEYBOARD> HidKeyboard(&Usb);
HIDBoot<USB_HID_PROTOCOL_MOUSE> HidMouse(&Usb);
//uint32_t next_time;
KbdRptParser KbdPrs;
MouseRptParser MousePrs;
@ -163,8 +161,6 @@ void setup()
delay( 200 );
//next_time = millis() + 5000;
HidComposite.SetReportParser(0, &KbdPrs);
HidComposite.SetReportParser(1, &MousePrs);
HidKeyboard.SetReportParser(0, &KbdPrs);

4
examples/HID/USBHIDBootMouse/USBHIDBootMouse.ino
View file

@ -54,8 +54,6 @@ USB Usb;
USBHub Hub(&Usb);
HIDBoot<USB_HID_PROTOCOL_MOUSE> HidMouse(&Usb);
uint32_t next_time;
MouseRptParser Prs;
void setup()
@ -71,8 +69,6 @@ void setup()
delay( 200 );
next_time = millis() + 5000;
HidMouse.SetReportParser(0, &Prs);
}

11
examples/USBH_MIDI/USBH_MIDI_dump/USBH_MIDI_dump.ino
View file

@ -43,16 +43,11 @@ void setup()
void loop()
{
//unsigned long t1;
Usb.Task();
//t1 = micros();
if ( Usb.getUsbTaskState() == USB_STATE_RUNNING )
{
MIDI_poll();
}
//delay(1ms)
//doDelay(t1, micros(), 1000);
}
// Poll USB MIDI Controler and send to serial MIDI
@ -69,11 +64,7 @@ void MIDI_poll()
pid = Midi.pid;
}
if (Midi.RecvData( &rcvd, bufMidi) == 0 ) {
#ifdef __ARDUINO_ARC__
sprintf(buf, "%016llX: ", millis()); // millis() is 64-bits on the Arduino/Genuino 101
#else
sprintf(buf, "%08lX: ", millis());
#endif
sprintf(buf, "%08lX: ", (uint32_t)millis());
Serial.print(buf);
Serial.print(rcvd);
Serial.print(':');

7
examples/USBH_MIDI/USB_MIDI_converter/USB_MIDI_converter.ino
View file

@ -49,16 +49,13 @@ void setup()
void loop()
{
unsigned long t1;
Usb.Task();
t1 = micros();
uint32_t t1 = (uint32_t)micros();
if ( Usb.getUsbTaskState() == USB_STATE_RUNNING )
{
MIDI_poll();
}
//delay(1ms)
doDelay(t1, micros(), 1000);
doDelay(t1, (uint32_t)micros(), 1000);
}
// Poll USB MIDI Controler and send to serial MIDI

7
examples/USBH_MIDI/USB_MIDI_converter_multi/USB_MIDI_converter_multi.ino
View file

@ -51,16 +51,13 @@ void setup()
void loop()
{
unsigned long t1;
Usb.Task();
t1 = micros();
uint32_t t1 = (uint32_t)micros();
if ( Usb.getUsbTaskState() == USB_STATE_RUNNING )
{
MIDI_poll();
}
//delay(1ms)
doDelay(t1, micros(), 1000);
doDelay(t1, (uint32_t)micros(), 1000);
}
// Poll USB MIDI Controler and send to serial MIDI

6
examples/USBH_MIDI/bidrectional_converter/bidrectional_converter.ino
View file

@ -70,11 +70,10 @@ void setup()
void loop()
{
unsigned long t1;
uint8_t msg[4];
Usb.Task();
t1 = micros();
uint32_t t1 = (uint32_t)micros();
if ( Usb.getUsbTaskState() == USB_STATE_RUNNING )
{
MIDI_poll();
@ -94,8 +93,7 @@ void loop()
}
}
}
//delay(1ms)
doDelay(t1, micros(), 1000);
doDelay(t1, (uint32_t)micros(), 1000);
}
// Poll USB MIDI Controler and send to serial MIDI

4
examples/adk/ArduinoBlinkLED/ArduinoBlinkLED.ino
View file

@ -68,8 +68,8 @@ void loop() {
digitalWrite(LED, msg[0] ? HIGH : LOW);
}
if ((int32_t)(millis() - timer) >= 1000) { // Send data every 1s
timer = millis();
if ((int32_t)((uint32_t)millis() - timer) >= 1000) { // Send data every 1s
timer = (uint32_t)millis();
rcode = adk.SndData(sizeof(timer), (uint8_t*)&timer);
if (rcode && rcode != hrNAK) {
Serial.print(F("\r\nData send: "));

2
examples/adk/term_time/term_time.ino
View file

@ -41,7 +41,7 @@ void loop()
return;
}
ultoa( millis() / 1000, (char *)buf, 10 );
ultoa((uint32_t)millis() / 1000, (char *)buf, 10 );
rcode = adk.SndData( strlen((char *)buf), buf );
if (rcode && rcode != hrNAK) {

4
examples/hub_demo/hub_demo.ino
View file

@ -57,7 +57,7 @@ void setup()
delay( 200 );
next_time = millis() + 10000;
next_time = (uint32_t)millis() + 10000;
}
void PrintDescriptors(uint8_t addr)
@ -96,7 +96,7 @@ void loop()
Usb.Task();
if ( Usb.getUsbTaskState() == USB_STATE_RUNNING ) {
if ((int32_t)(millis() - next_time) >= 0L) {
if ((int32_t)((uint32_t)millis() - next_time) >= 0L) {
Usb.ForEachUsbDevice(&PrintAllDescriptors);
Usb.ForEachUsbDevice(&PrintAllAddresses);

2
examples/max_LCD/max_LCD.ino
View file

@ -25,5 +25,5 @@ void loop() {
// Set the cursor to column 0, line 1 (note: line 1 is the second row, since counting begins with 0):
lcd.setCursor(0, 1);
// Print the number of seconds since reset:
lcd.print(millis() / 1000);
lcd.print((uint32_t)millis() / 1000);
}

2
examples/pl2303/pl2303_gps/pl2303_gps.ino
View file

@ -71,7 +71,7 @@ void loop() {
if(Pl.isReady()) {
/* reading the GPS */
if((int32_t)(millis() - read_delay) >= 0L) {
if((int32_t)((uint32_t)millis() - read_delay) >= 0L) {
read_delay += READ_DELAY;
rcode = Pl.RcvData(&rcvd, buf);
if(rcode && rcode != hrNAK)

4
examples/pl2303/pl2303_tinygps/pl2303_tinygps.ino
View file

@ -94,10 +94,10 @@ void loop()
if( Pl.isReady()) {
bool newdata = false;
uint32_t start = millis();
uint32_t start = (uint32_t)millis();
// Every 5 seconds we print an update
while ((int32_t)(millis() - start) < 5000) {
while ((int32_t)((uint32_t)millis() - start) < 5000) {
if( feedgps()) {
newdata = true;
}

30
examples/testusbhostFAT/testusbhostFAT.ino
View file

@ -284,7 +284,7 @@ void setup() {
analogWrite(LED_BUILTIN, 0);
delay(500);
LEDnext_time = millis() + 1;
LEDnext_time = (uint32_t)millis() + 1;
#if EXT_RAM
printf_P(PSTR("Total EXT RAM banks %i\r\n"), xmem::getTotalBanks());
#endif
@ -321,10 +321,10 @@ void setup() {
TIMSK3 |= (1 << OCIE1A);
sei();
HEAPnext_time = millis() + 10000;
HEAPnext_time = (uint32_t)millis() + 10000;
#endif
#if defined(__AVR__)
HEAPnext_time = millis() + 10000;
HEAPnext_time = (uint32_t)millis() + 10000;
#endif
}
@ -371,8 +371,8 @@ void serialEvent() {
// ALL teensy versions LACK PWM ON LED
ISR(TIMER3_COMPA_vect) {
if((int32_t)(millis() - LEDnext_time) >= 0L) {
LEDnext_time = millis() + 30;
if((int32_t)((uint32_t)millis() - LEDnext_time) >= 0L) {
LEDnext_time = (uint32_t)millis() + 30;
// set the brightness of LED
analogWrite(LED_BUILTIN, brightness);
@ -407,11 +407,11 @@ void loop() {
#if defined(__AVR__)
// Print a heap status report about every 10 seconds.
if((int32_t)(millis() - HEAPnext_time) >= 0L) {
if((int32_t)((uint32_t)millis() - HEAPnext_time) >= 0L) {
if(UsbDEBUGlvl > 0x50) {
printf_P(PSTR("Available heap: %u Bytes\r\n"), freeHeap());
}
HEAPnext_time = millis() + 10000;
HEAPnext_time = (uint32_t)millis() + 10000;
}
TCCR3B = 0;
#endif
@ -421,7 +421,7 @@ void loop() {
#endif
// Horrid! This sort of thing really belongs in an ISR, not here!
// We also will be needing to test each hub port, we don't do this yet!
if(!change && !usbon && (int32_t)(millis() - usbon_time) >= 0L) {
if(!change && !usbon && (int32_t)((uint32_t)millis() - usbon_time) >= 0L) {
change = true;
usbon = true;
}
@ -433,7 +433,7 @@ void loop() {
printf_P(PSTR("VBUS on\r\n"));
} else {
Usb.vbusPower(vbus_off);
usbon_time = millis() + 2000;
usbon_time = (uint32_t)millis() + 2000;
}
}
Usb.Task();
@ -700,27 +700,27 @@ out:
if(rc) goto failed;
for(bw = 0; bw < mbxs; bw++) My_Buff_x[bw] = bw & 0xff;
fflush(stdout);
start = millis();
while(start == millis());
start = (uint32_t)millis();
while(start == (uint32_t)millis());
for(ii = 10485760LU / mbxs; ii > 0LU; ii--) {
rc = f_write(&My_File_Object_x, My_Buff_x, mbxs, &bw);
if(rc || !bw) goto failed;
}
rc = f_close(&My_File_Object_x);
if(rc) goto failed;
end = millis();
end = (uint32_t)millis();
wt = (end - start) - 1;
printf_P(PSTR("Time to write 10485760 bytes: %lu ms (%lu sec) \r\n"), wt, (500 + wt) / 1000UL);
rc = f_open(&My_File_Object_x, "0:/10MB.bin", FA_READ);
fflush(stdout);
start = millis();
while(start == millis());
start = (uint32_t)millis();
while(start == (uint32_t)millis());
if(rc) goto failed;
for(;;) {
rc = f_read(&My_File_Object_x, My_Buff_x, mbxs, &bw); /* Read a chunk of file */
if(rc || !bw) break; /* Error or end of file */
}
end = millis();
end = (uint32_t)millis();
if(rc) goto failed;
rc = f_close(&My_File_Object_x);
if(rc) goto failed;

4
hidboot.h
View file

@ -578,7 +578,7 @@ template <const uint8_t BOOT_PROTOCOL>
uint8_t HIDBoot<BOOT_PROTOCOL>::Poll() {
uint8_t rcode = 0;
if(bPollEnable && ((int32_t)(millis() - qNextPollTime) >= 0L)) {
if(bPollEnable && ((int32_t)((uint32_t)millis() - qNextPollTime) >= 0L)) {
// To-do: optimize manually, using the for loop only if needed.
for(int i = 0; i < epMUL(BOOT_PROTOCOL); i++) {
@ -619,7 +619,7 @@ uint8_t HIDBoot<BOOT_PROTOCOL>::Poll() {
}
}
qNextPollTime = millis() + bInterval;
qNextPollTime = (uint32_t)millis() + bInterval;
}
return rcode;
}

4
hidcomposite.cpp
View file

@ -360,8 +360,8 @@ uint8_t HIDComposite::Poll() {
if(!bPollEnable)
return 0;
if((int32_t)(millis() - qNextPollTime) >= 0L) {
qNextPollTime = millis() + pollInterval;
if((int32_t)((uint32_t)millis() - qNextPollTime) >= 0L) {
qNextPollTime = (uint32_t)millis() + pollInterval;
uint8_t buf[constBuffLen];

4
hiduniversal.cpp
View file

@ -372,8 +372,8 @@ uint8_t HIDUniversal::Poll() {
if(!bPollEnable)
return 0;
if((int32_t)(millis() - qNextPollTime) >= 0L) {
qNextPollTime = millis() + pollInterval;
if((int32_t)((uint32_t)millis() - qNextPollTime) >= 0L) {
qNextPollTime = (uint32_t)millis() + pollInterval;
uint8_t buf[constBuffLen];

4
masstorage.cpp
View file

@ -659,7 +659,7 @@ void BulkOnly::CheckMedia() {
}
printf("\r\n");
#endif
qNextPollTime = millis() + 2000;
qNextPollTime = (uint32_t)millis() + 2000;
}
/**
@ -673,7 +673,7 @@ uint8_t BulkOnly::Poll() {
if(!bPollEnable)
return 0;
if((int32_t)(millis() - qNextPollTime) >= 0L) {
if((int32_t)((uint32_t)millis() - qNextPollTime) >= 0L) {
CheckMedia();
}
//rcode = 0;

4
usbhub.cpp
View file

@ -232,9 +232,9 @@ uint8_t USBHub::Poll() {
if(!bPollEnable)
return 0;
if(((int32_t)(millis() - qNextPollTime) >= 0L)) {
if(((int32_t)((uint32_t)millis() - qNextPollTime) >= 0L)) {
rcode = CheckHubStatus();
qNextPollTime = millis() + 100;
qNextPollTime = (uint32_t)millis() + 100;
}
return rcode;
}