PL2303 Xbee terminal added

examples/acm/acm_terminal/acm_terminal.pde

@@ -84,9 +84,11 @@ void loop()
        delay(50);
        
         /* reading the phone */
-        /* buffer size must be equal to max.packet size */
-        uint8_t  buf[32];           
-        uint16_t rcvd = 32;
+        /* buffer size must be greater or equal to max.packet size */
+        /* it it set to 64 (largest possible max.packet size) here, can be tuned down
+        for particular endpoint */
+        uint8_t  buf[64];           
+        uint16_t rcvd = 64;
         rcode = Acm.RcvData(&rcvd, buf);
          if (rcode && rcode != hrNAK)
             ErrorMessage<uint8_t>(PSTR("Ret"), rcode);

examples/pl2303/pl2303_xbee_terminal/pl2303_xbee_terminal.pde

@@ -0,0 +1,120 @@
+/* Arduino terminal for PL2303 USB to serial converter and XBee radio. */
+/* Inserts linefeed after carriage return in data sent to and received from Xbee */
+/* USB support */
+#include <avrpins.h>
+#include <max3421e.h>
+#include <usbhost.h>
+#include <usb_ch9.h>
+#include <Usb.h>
+#include <usbhub.h>
+#include <avr/pgmspace.h>
+#include <address.h>
+/* CDC support */
+#include <cdcacm.h>
+#include <cdcprolific.h>
+/* Debug support */
+#include <printhex.h>
+#include <message.h>
+#include <hexdump.h>
+#include <parsetools.h>
+
+class PLAsyncOper : public CDCAsyncOper
+{
+public:
+    virtual uint8_t OnInit(ACM *pacm);
+};
+
+uint8_t PLAsyncOper::OnInit(ACM *pacm)
+{
+    uint8_t rcode;
+    
+    // Set DTR = 1
+    rcode = pacm->SetControlLineState(1);
+
+    if (rcode)
+    {
+        ErrorMessage<uint8_t>(PSTR("SetControlLineState"), rcode);
+        return rcode;
+    }
+
+    LINE_CODING	lc;
+    lc.dwDTERate	= 115200;	
+    lc.bCharFormat	= 0;
+    lc.bParityType	= 0;
+    lc.bDataBits	= 8;	
+	
+    rcode = pacm->SetLineCoding(&lc);
+
+    if (rcode)
+        ErrorMessage<uint8_t>(PSTR("SetLineCoding"), rcode);
+            
+    return rcode;
+}
+USB     Usb;
+//USBHub     Hub(&Usb);
+PLAsyncOper  AsyncOper;
+PL           Pl(&Usb, &AsyncOper);
+
+void setup()
+{
+  Serial.begin( 115200 );
+  Serial.println("Start");
+
+  if (Usb.Init() == -1)
+      Serial.println("OSCOKIRQ failed to assert");
+      
+  delay( 200 ); 
+}
+
+void loop()
+{
+    Usb.Task();
+  
+    if( Usb.getUsbTaskState() == USB_STATE_RUNNING )
+    {  
+       uint8_t rcode;
+       
+       /* reading the keyboard */
+       if(Serial.available()) {
+         uint8_t data= Serial.read();
+         
+         if ( data == '\r' ) {
+           Serial.print("\r\n");  //insert linefeed
+         }
+         else {
+           Serial.print( data );  //echo back to the screen
+         }
+         
+         /* sending to the phone */
+         rcode = Pl.SndData(1, &data);
+         if (rcode)
+            ErrorMessage<uint8_t>(PSTR("SndData"), rcode);
+       }//if(Serial.available()...
+
+       delay(50);
+       
+        /* reading the converter */
+        /* buffer size must be greater or equal to max.packet size */
+        /* it it set to 64 (largest possible max.packet size) here, can be tuned down
+        for particular endpoint */
+        uint8_t  buf[64];           
+        uint16_t rcvd = 64;
+        rcode = Pl.RcvData(&rcvd, buf);
+         if (rcode && rcode != hrNAK)
+            ErrorMessage<uint8_t>(PSTR("Ret"), rcode);
+            
+            if( rcvd ) { //more than zero bytes received
+              for(uint16_t i=0; i < rcvd; i++ ) {
+                if( buf[i] =='\r' ) {
+                  Serial.print("\r\n");  //insert linefeed
+                }
+                else {
+                  Serial.print(buf[i]); //printing on the screen
+                }
+              }              
+            }
+        delay(10);            
+    }//if( Usb.getUsbTaskState() == USB_STATE_RUNNING..    
+}
+
+