diff --git a/BTD.cpp b/BTD.cpp index 36e7e705..20d6b9cf 100644 --- a/BTD.cpp +++ b/BTD.cpp @@ -34,6 +34,7 @@ bAddress(0), // Device address - mandatory bNumEP(1), // If config descriptor needs to be parsed qNextPollTime(0), // Reset NextPollTime pollInterval(0), +simple_pairing_supported(false), bPollEnable(false) // Don't start polling before dongle is connected { for(uint8_t i = 0; i < BTD_NUM_SERVICES; i++) @@ -321,6 +322,7 @@ void BTD::Initialize() { qNextPollTime = 0; // Reset next poll time pollInterval = 0; bPollEnable = false; // Don't start polling before dongle is connected + simple_pairing_supported = false; } /* Extracts interrupt-IN, bulk-IN, bulk-OUT endpoint information from config descriptor */ @@ -431,10 +433,13 @@ void BTD::HCI_event_task() { #ifdef DEBUG_USB_HOST if(hcibuf[6] == 0) { // Page 0 Notify(PSTR("\r\nDongle "), 0x80); - if(hcibuf[8 + 6] & (1U << 3)) + if(hcibuf[8 + 6] & (1U << 3)) { + simple_pairing_supported = true; Notify(PSTR("supports"), 0x80); - else + } else { + simple_pairing_supported = false; Notify(PSTR("does NOT support"), 0x80); + } Notify(PSTR(" secure simple pairing (controller support)"), 0x80); } else if(hcibuf[6] == 1) { // Page 1 Notify(PSTR("\r\nDongle "), 0x80); @@ -485,7 +490,7 @@ void BTD::HCI_event_task() { case EV_INQUIRY_RESULT: if(hcibuf[2]) { // Check that there is more than zero responses -#if defined(EXTRADEBUG) && 0 +#ifdef EXTRADEBUG Notify(PSTR("\r\nNumber of responses: "), 0x80); Notify(hcibuf[2], 0x80); #endif @@ -495,7 +500,7 @@ void BTD::HCI_event_task() { for(uint8_t j = 0; j < 3; j++) classOfDevice[j] = hcibuf[j + 4 + offset]; -#if defined(EXTRADEBUG) && 0 +#ifdef EXTRADEBUG Notify(PSTR("\r\nClass of device: "), 0x80); D_PrintHex (classOfDevice[2], 0x80); Notify(PSTR(" "), 0x80); @@ -710,8 +715,8 @@ void BTD::HCI_event_task() { /* We will just ignore the following events */ case EV_MAX_SLOTS_CHANGE: - break; case EV_NUM_COMPLETE_PKT: + break; case EV_ROLE_CHANGED: case EV_PAGE_SCAN_REP_MODE: case EV_LOOPBACK_COMMAND: @@ -806,29 +811,14 @@ void BTD::HCI_task() { case HCI_LOCAL_VERSION_STATE: // The local version is used by the PS3BT class if(hci_check_flag(HCI_FLAG_READ_VERSION)) { - hci_read_local_extended_features(0); // "Requests the normal LMP features as returned by Read_Local_Supported_Features" - //hci_read_local_extended_features(1); // Read page 1 - hci_state = HCI_LOCAL_EXTENDED_FEATURES_STATE; - } - break; - - case HCI_LOCAL_EXTENDED_FEATURES_STATE: - if(hci_check_flag(HCI_FLAG_LOCAL_EXTENDED_FEATURES)) { - hci_write_simple_pairing_mode(true); - hci_state = HCI_WRITE_SIMPLE_PAIRING_STATE; - } - break; - - case HCI_WRITE_SIMPLE_PAIRING_STATE: - if(hci_check_flag(HCI_FLAG_CMD_COMPLETE)) { -#ifdef DEBUG_USB_HOST - Notify(PSTR("\r\nSimple pairing was enabled"), 0x80); -#endif if(btdName != NULL) { hci_write_local_name(btdName); hci_state = HCI_WRITE_NAME_STATE; - } else - hci_state = HCI_CHECK_DEVICE_SERVICE; + } else { + hci_read_local_extended_features(0); // "Requests the normal LMP features as returned by Read_Local_Supported_Features" + //hci_read_local_extended_features(1); // Read page 1 + hci_state = HCI_LOCAL_EXTENDED_FEATURES_STATE; + } } break; @@ -837,6 +827,27 @@ void BTD::HCI_task() { #ifdef DEBUG_USB_HOST Notify(PSTR("\r\nThe name was set to: "), 0x80); NotifyStr(btdName, 0x80); +#endif + hci_read_local_extended_features(0); // "Requests the normal LMP features as returned by Read_Local_Supported_Features" + //hci_read_local_extended_features(1); // Read page 1 + hci_state = HCI_LOCAL_EXTENDED_FEATURES_STATE; + } + break; + + case HCI_LOCAL_EXTENDED_FEATURES_STATE: + if(hci_check_flag(HCI_FLAG_LOCAL_EXTENDED_FEATURES)) { + if(simple_pairing_supported) { + hci_write_simple_pairing_mode(true); + hci_state = HCI_WRITE_SIMPLE_PAIRING_STATE; + } else + hci_state = HCI_CHECK_DEVICE_SERVICE; + } + break; + + case HCI_WRITE_SIMPLE_PAIRING_STATE: + if(hci_check_flag(HCI_FLAG_CMD_COMPLETE)) { +#ifdef DEBUG_USB_HOST + Notify(PSTR("\r\nSimple pairing was enabled"), 0x80); #endif hci_state = HCI_CHECK_DEVICE_SERVICE; } diff --git a/BTD.h b/BTD.h index ed179937..c12e325b 100644 --- a/BTD.h +++ b/BTD.h @@ -191,6 +191,17 @@ #define HID_CTRL_PSM 0x11 // HID_Control PSM Value #define HID_INTR_PSM 0x13 // HID_Interrupt PSM Value +/* Used for SDP */ +#define SDP_SERVICE_SEARCH_REQUEST 0x02 +#define SDP_SERVICE_SEARCH_RESPONSE 0x03 +#define SDP_SERVICE_ATTRIBUTE_REQUEST 0x04 +#define SDP_SERVICE_ATTRIBUTE_RESPONSE 0x05 +#define SDP_SERVICE_SEARCH_ATTRIBUTE_REQUEST_PDU 0x06 // See the RFCOMM specs +#define SDP_SERVICE_SEARCH_ATTRIBUTE_RESPONSE_PDU 0x07 // See the RFCOMM specs +#define PNP_INFORMATION_UUID 0x1200 +#define SERIALPORT_UUID 0x1101 // See http://www.bluetooth.org/Technical/AssignedNumbers/service_discovery.htm +#define L2CAP_UUID 0x0100 + // Used to determine if it is a Bluetooth dongle #define WI_SUBCLASS_RF 0x01 // RF Controller #define WI_PROTOCOL_BT 0x01 // Bluetooth Programming Interface @@ -553,6 +564,7 @@ private: uint16_t PID, VID; // PID and VID of device connected uint8_t pollInterval; + bool simple_pairing_supported; bool bPollEnable; bool pairWiiUsingSync; // True if pairing was done using the Wii SYNC button. diff --git a/BTHID.cpp b/BTHID.cpp index 225aa1f8..3928c7dd 100644 --- a/BTHID.cpp +++ b/BTHID.cpp @@ -41,15 +41,20 @@ protocolMode(USB_HID_BOOT_PROTOCOL) { void BTHID::Reset() { connected = false; activeConnection = false; + SDPConnected = false; l2cap_event_flag = 0; // Reset flags + l2cap_sdp_state = L2CAP_SDP_WAIT; l2cap_state = L2CAP_WAIT; ResetBTHID(); } void BTHID::disconnect() { // Use this void to disconnect the device + if(SDPConnected) + pBtd->l2cap_disconnection_request(hci_handle, ++identifier, sdp_scid, sdp_dcid); // First the HID interrupt channel has to be disconnected, then the HID control channel and finally the HCI connection pBtd->l2cap_disconnection_request(hci_handle, ++identifier, interrupt_scid, interrupt_dcid); Reset(); + l2cap_sdp_state = L2CAP_DISCONNECT_RESPONSE; l2cap_state = L2CAP_INTERRUPT_DISCONNECT; } @@ -59,13 +64,22 @@ void BTHID::ACLData(uint8_t* l2capinbuf) { Notify(PSTR(" "), 0x80); D_PrintHex (l2capinbuf[6], 0x80); - Notify(PSTR("\r\nData: "), 0x80); - Notify(PSTR("\r\n"), 0x80); + Notify(PSTR(", data: "), 0x80); for(uint16_t i = 0; i < ((uint16_t)l2capinbuf[5] << 8 | l2capinbuf[4]); i++) { D_PrintHex (l2capinbuf[i + 8], 0x80); Notify(PSTR(" "), 0x80); } + if(!connected) { + if(l2capinbuf[8] == L2CAP_CMD_CONNECTION_REQUEST) { + if((l2capinbuf[12] | (l2capinbuf[13] << 8)) == SDP_PSM && !pBtd->sdpConnectionClaimed) { + pBtd->sdpConnectionClaimed = true; + hci_handle = pBtd->hci_handle; // Store the HCI Handle for the connection + l2cap_sdp_state = L2CAP_SDP_WAIT; // Reset state + } + } + } + if(!pBtd->l2capConnectionClaimed && pBtd->incomingHIDDevice && !connected && !activeConnection) { if(l2capinbuf[8] == L2CAP_CMD_CONNECTION_REQUEST) { if((l2capinbuf[12] | (l2capinbuf[13] << 8)) == HID_CTRL_PSM) { @@ -124,7 +138,12 @@ void BTHID::ACLData(uint8_t* l2capinbuf) { Notify(PSTR(" Identifier: "), 0x80); D_PrintHex (l2capinbuf[9], 0x80); #endif - if((l2capinbuf[12] | (l2capinbuf[13] << 8)) == HID_CTRL_PSM) { + if((l2capinbuf[12] | (l2capinbuf[13] << 8)) == SDP_PSM) { + identifier = l2capinbuf[9]; + sdp_scid[0] = l2capinbuf[14]; + sdp_scid[1] = l2capinbuf[15]; + l2cap_set_flag(L2CAP_FLAG_CONNECTION_SDP_REQUEST); + } else if((l2capinbuf[12] | (l2capinbuf[13] << 8)) == HID_CTRL_PSM) { identifier = l2capinbuf[9]; control_scid[0] = l2capinbuf[14]; control_scid[1] = l2capinbuf[15]; @@ -137,7 +156,11 @@ void BTHID::ACLData(uint8_t* l2capinbuf) { } } else if(l2capinbuf[8] == L2CAP_CMD_CONFIG_RESPONSE) { if((l2capinbuf[16] | (l2capinbuf[17] << 8)) == 0x0000) { // Success - if(l2capinbuf[12] == control_dcid[0] && l2capinbuf[13] == control_dcid[1]) { + if(l2capinbuf[12] == sdp_dcid[0] && l2capinbuf[13] == sdp_dcid[1]) { + //Notify(PSTR("\r\nSDP Configuration Complete"), 0x80); + identifier = l2capinbuf[9]; + l2cap_set_flag(L2CAP_FLAG_CONFIG_SDP_SUCCESS); + } else if(l2capinbuf[12] == control_dcid[0] && l2capinbuf[13] == control_dcid[1]) { //Notify(PSTR("\r\nHID Control Configuration Complete"), 0x80); identifier = l2capinbuf[9]; l2cap_set_flag(L2CAP_FLAG_CONFIG_CONTROL_SUCCESS); @@ -148,7 +171,10 @@ void BTHID::ACLData(uint8_t* l2capinbuf) { } } } else if(l2capinbuf[8] == L2CAP_CMD_CONFIG_REQUEST) { - if(l2capinbuf[12] == control_dcid[0] && l2capinbuf[13] == control_dcid[1]) { + if(l2capinbuf[12] == sdp_dcid[0] && l2capinbuf[13] == sdp_dcid[1]) { + //Notify(PSTR("\r\nSDP Configuration Request"), 0x80); + pBtd->l2cap_config_response(hci_handle, l2capinbuf[9], sdp_scid); + } else if(l2capinbuf[12] == control_dcid[0] && l2capinbuf[13] == control_dcid[1]) { //Notify(PSTR("\r\nHID Control Configuration Request"), 0x80); pBtd->l2cap_config_response(hci_handle, l2capinbuf[9], control_scid); } else if(l2capinbuf[12] == interrupt_dcid[0] && l2capinbuf[13] == interrupt_dcid[1]) { @@ -156,7 +182,13 @@ void BTHID::ACLData(uint8_t* l2capinbuf) { pBtd->l2cap_config_response(hci_handle, l2capinbuf[9], interrupt_scid); } } else if(l2capinbuf[8] == L2CAP_CMD_DISCONNECT_REQUEST) { - if(l2capinbuf[12] == control_dcid[0] && l2capinbuf[13] == control_dcid[1]) { + if(l2capinbuf[12] == sdp_dcid[0] && l2capinbuf[13] == sdp_dcid[1]) { +#ifdef DEBUG_USB_HOST + Notify(PSTR("\r\nDisconnect Request: SDP Channel"), 0x80); +#endif + identifier = l2capinbuf[9]; + l2cap_set_flag(L2CAP_FLAG_DISCONNECT_SDP_REQUEST); + } else if(l2capinbuf[12] == control_dcid[0] && l2capinbuf[13] == control_dcid[1]) { #ifdef DEBUG_USB_HOST Notify(PSTR("\r\nDisconnect Request: Control Channel"), 0x80); #endif @@ -172,7 +204,11 @@ void BTHID::ACLData(uint8_t* l2capinbuf) { Reset(); } } else if(l2capinbuf[8] == L2CAP_CMD_DISCONNECT_RESPONSE) { - if(l2capinbuf[12] == control_scid[0] && l2capinbuf[13] == control_scid[1]) { + if(l2capinbuf[12] == sdp_scid[0] && l2capinbuf[13] == sdp_scid[1]) { + //Notify(PSTR("\r\nDisconnect Response: SDP Channel"), 0x80); + identifier = l2capinbuf[9]; + l2cap_set_flag(L2CAP_FLAG_DISCONNECT_RESPONSE); + } else if(l2capinbuf[12] == control_scid[0] && l2capinbuf[13] == control_scid[1]) { //Notify(PSTR("\r\nDisconnect Response: Control Channel"), 0x80); identifier = l2capinbuf[9]; l2cap_set_flag(L2CAP_FLAG_DISCONNECT_CONTROL_RESPONSE); @@ -181,6 +217,12 @@ void BTHID::ACLData(uint8_t* l2capinbuf) { identifier = l2capinbuf[9]; l2cap_set_flag(L2CAP_FLAG_DISCONNECT_INTERRUPT_RESPONSE); } + } else if(l2capinbuf[8] == L2CAP_CMD_INFORMATION_REQUEST) { +#ifdef DEBUG_USB_HOST + Notify(PSTR("\r\nInformation request"), 0x80); +#endif + identifier = l2capinbuf[9]; + pBtd->l2cap_information_response(hci_handle, identifier, l2capinbuf[12], l2capinbuf[13]); } #ifdef EXTRADEBUG else { @@ -188,6 +230,97 @@ void BTHID::ACLData(uint8_t* l2capinbuf) { Notify(PSTR("\r\nL2CAP Unknown Signaling Command: "), 0x80); D_PrintHex (l2capinbuf[8], 0x80); } +#endif + } else if(l2capinbuf[6] == sdp_dcid[0] && l2capinbuf[7] == sdp_dcid[1]) { // SDP + if(l2capinbuf[8] == SDP_SERVICE_SEARCH_REQUEST) { + Notify(PSTR("\r\nSDP_SERVICE_SEARCH_REQUEST"), 0x80); + + // Send response + l2capoutbuf[0] = SDP_SERVICE_SEARCH_RESPONSE; + l2capoutbuf[1] = l2capinbuf[9];//transactionIDHigh; + l2capoutbuf[2] = l2capinbuf[10];//transactionIDLow; +#if 1 + l2capoutbuf[3] = 0x00; // MSB Parameter Length + l2capoutbuf[4] = 0x05; // LSB Parameter Length = 5 + + l2capoutbuf[5] = 0x00; // MSB TotalServiceRecordCount + l2capoutbuf[6] = 0x00; // LSB TotalServiceRecordCount = 0 + + l2capoutbuf[7] = 0x00; // MSB CurrentServiceRecordCount + l2capoutbuf[8] = 0x00; // LSB CurrentServiceRecordCount = 0 + + l2capoutbuf[9] = 0x00; // No continuation state + + SDP_Command(l2capoutbuf, 10); +#else + l2capoutbuf[3] = 0x00; // MSB Parameter Length + l2capoutbuf[4] = 0x09; // LSB Parameter Length = 9 + + l2capoutbuf[5] = 0x00; // MSB TotalServiceRecordCount + l2capoutbuf[6] = 0x01; // LSB TotalServiceRecordCount = 1 + + l2capoutbuf[7] = 0x00; // MSB CurrentServiceRecordCount + l2capoutbuf[8] = 0x01; // LSB CurrentServiceRecordCount = 1 + + l2capoutbuf[9] = 0x00; // ServiceRecordHandleList + l2capoutbuf[10] = 0x01; // ServiceRecordHandleList + l2capoutbuf[11] = 0x00; // ServiceRecordHandleList + l2capoutbuf[12] = 0x01; // ServiceRecordHandleList: 0x10001. + + l2capoutbuf[13] = 0x00; // No continuation state + + SDP_Command(l2capoutbuf, 14); +#endif + } else if(l2capinbuf[8] == SDP_SERVICE_ATTRIBUTE_REQUEST) { + Notify(PSTR("\r\nSDP_SERVICE_ATTRIBUTE_REQUEST"), 0x80); + + // Send response + l2capoutbuf[0] = SDP_SERVICE_ATTRIBUTE_RESPONSE; + l2capoutbuf[1] = l2capinbuf[9];//transactionIDHigh; + l2capoutbuf[2] = l2capinbuf[10];//transactionIDLow; + + l2capoutbuf[3] = 0x00; // MSB Parameter Length + l2capoutbuf[4] = 0x05; // LSB Parameter Length = 5 + + l2capoutbuf[5] = 0x00; // MSB AttributeListByteCount + l2capoutbuf[6] = 0x02; // LSB AttributeListByteCount = 2 + + // TODO: What to send? + l2capoutbuf[7] = 0x35; // Data element sequence - length in next byte + l2capoutbuf[8] = 0x00; // Length = 0 + + l2capoutbuf[9] = 0x00; // No continuation state + + SDP_Command(l2capoutbuf, 10); + } else if(l2capinbuf[8] == SDP_SERVICE_SEARCH_ATTRIBUTE_REQUEST_PDU) { + Notify(PSTR("\r\nSDP_SERVICE_SEARCH_ATTRIBUTE_REQUEST_PDU"), 0x80); + +#ifdef EXTRADEBUG + Notify(PSTR("\r\nUUID: "), 0x80); + uint16_t uuid; + if((l2capinbuf[16] << 8 | l2capinbuf[17]) == 0x0000) // Check if it's sending the UUID as a 128-bit UUID + uuid = (l2capinbuf[18] << 8 | l2capinbuf[19]); + else // Short UUID + uuid = (l2capinbuf[16] << 8 | l2capinbuf[17]); + D_PrintHex (uuid, 0x80); + + Notify(PSTR("\r\nLength: "), 0x80); + uint16_t length = l2capinbuf[11] << 8 | l2capinbuf[12]; + D_PrintHex (length, 0x80); + Notify(PSTR("\r\nData: "), 0x80); + for(uint8_t i = 0; i < length; i++) { + D_PrintHex (l2capinbuf[13 + i], 0x80); + Notify(PSTR(" "), 0x80); + } +#endif + + serviceNotSupported(l2capinbuf[9], l2capinbuf[10]); // The service is not supported + } +#ifdef EXTRADEBUG + else { + Notify(PSTR("\r\nUnknown PDU: "), 0x80); + D_PrintHex (l2capinbuf[8], 0x80); + } #endif } else if(l2capinbuf[6] == interrupt_dcid[0] && l2capinbuf[7] == interrupt_dcid[1]) { // l2cap_interrupt #ifdef PRINTREPORT @@ -243,10 +376,59 @@ void BTHID::ACLData(uint8_t* l2capinbuf) { } } #endif + SDP_task(); L2CAP_task(); } } +void BTHID::SDP_task() { + switch(l2cap_sdp_state) { + case L2CAP_SDP_WAIT: + if(l2cap_check_flag(L2CAP_FLAG_CONNECTION_SDP_REQUEST)) { + l2cap_clear_flag(L2CAP_FLAG_CONNECTION_SDP_REQUEST); // Clear flag +#ifdef DEBUG_USB_HOST + Notify(PSTR("\r\nSDP Incoming Connection Request"), 0x80); +#endif + pBtd->l2cap_connection_response(hci_handle, identifier, sdp_dcid, sdp_scid, PENDING); + delay(1); + pBtd->l2cap_connection_response(hci_handle, identifier, sdp_dcid, sdp_scid, SUCCESSFUL); + identifier++; + delay(1); + pBtd->l2cap_config_request(hci_handle, identifier, sdp_scid); + l2cap_sdp_state = L2CAP_SDP_SUCCESS; + } else if(l2cap_check_flag(L2CAP_FLAG_DISCONNECT_SDP_REQUEST)) { + l2cap_clear_flag(L2CAP_FLAG_DISCONNECT_SDP_REQUEST); // Clear flag + SDPConnected = false; +#ifdef DEBUG_USB_HOST + Notify(PSTR("\r\nDisconnected SDP Channel"), 0x80); +#endif + pBtd->l2cap_disconnection_response(hci_handle, identifier, sdp_dcid, sdp_scid); + } + break; + case L2CAP_SDP_SUCCESS: + if(l2cap_check_flag(L2CAP_FLAG_CONFIG_SDP_SUCCESS)) { + l2cap_clear_flag(L2CAP_FLAG_CONFIG_SDP_SUCCESS); // Clear flag +#ifdef DEBUG_USB_HOST + Notify(PSTR("\r\nSDP Successfully Configured"), 0x80); +#endif + SDPConnected = true; + l2cap_sdp_state = L2CAP_SDP_WAIT; + } + break; + + case L2CAP_DISCONNECT_RESPONSE: // This is for both disconnection response from the RFCOMM and SDP channel if they were connected + if(l2cap_check_flag(L2CAP_FLAG_DISCONNECT_RESPONSE)) { +#ifdef DEBUG_USB_HOST + Notify(PSTR("\r\nDisconnected L2CAP Connection"), 0x80); +#endif + pBtd->hci_disconnect(hci_handle); + hci_handle = -1; // Reset handle + Reset(); + } + break; + } +} + void BTHID::L2CAP_task() { switch(l2cap_state) { /* These states are used if the HID device is the host */ @@ -383,6 +565,27 @@ void BTHID::Run() { } } +void BTHID::SDP_Command(uint8_t* data, uint8_t nbytes) { // See page 223 in the Bluetooth specs + pBtd->L2CAP_Command(hci_handle, data, nbytes, sdp_scid[0], sdp_scid[1]); +} + +void BTHID::serviceNotSupported(uint8_t transactionIDHigh, uint8_t transactionIDLow) { // See page 235 in the Bluetooth specs + l2capoutbuf[0] = SDP_SERVICE_SEARCH_ATTRIBUTE_RESPONSE_PDU; + l2capoutbuf[1] = transactionIDHigh; + l2capoutbuf[2] = transactionIDLow; + l2capoutbuf[3] = 0x00; // MSB Parameter Length + l2capoutbuf[4] = 0x05; // LSB Parameter Length = 5 + l2capoutbuf[5] = 0x00; // MSB AttributeListsByteCount + l2capoutbuf[6] = 0x02; // LSB AttributeListsByteCount = 2 + + /* Attribute ID/Value Sequence: */ + l2capoutbuf[7] = 0x35; // Data element sequence - length in next byte + l2capoutbuf[8] = 0x00; // Length = 0 + l2capoutbuf[9] = 0x00; // No continuation state + + SDP_Command(l2capoutbuf, 10); +} + /************************************************************/ /* HID Commands */ diff --git a/BTHID.h b/BTHID.h index 7d1d1116..b15649b5 100644 --- a/BTHID.h +++ b/BTHID.h @@ -141,20 +141,30 @@ protected: /** L2CAP source CID for HID_Interrupt */ uint8_t interrupt_scid[2]; + uint8_t l2cap_sdp_state; + uint8_t sdp_scid[2]; // L2CAP source CID for SDP + private: HIDReportParser *pRptParser[NUM_PARSERS]; // Pointer to HIDReportParsers. + uint8_t l2capoutbuf[BULK_MAXPKTSIZE]; // General purpose buffer for l2cap out data + void SDP_Command(uint8_t* data, uint8_t nbytes); + void serviceNotSupported(uint8_t transactionIDHigh, uint8_t transactionIDLow); + /** Set report protocol. */ void setProtocol(); uint8_t protocolMode; + void SDP_task(); void L2CAP_task(); // L2CAP state machine bool activeConnection; // Used to indicate if it already has established a connection + bool SDPConnected; /* Variables used for L2CAP communication */ uint8_t control_dcid[2]; // L2CAP device CID for HID_Control - Always 0x0070 uint8_t interrupt_dcid[2]; // L2CAP device CID for HID_Interrupt - Always 0x0071 + uint8_t sdp_dcid[2]; uint8_t l2cap_state; }; #endif diff --git a/SPP.h b/SPP.h index bb3027b4..116296ca 100644 --- a/SPP.h +++ b/SPP.h @@ -20,12 +20,6 @@ #include "BTD.h" -/* Used for SDP */ -#define SDP_SERVICE_SEARCH_ATTRIBUTE_REQUEST_PDU 0x06 // See the RFCOMM specs -#define SDP_SERVICE_SEARCH_ATTRIBUTE_RESPONSE_PDU 0x07 // See the RFCOMM specs -#define SERIALPORT_UUID 0x1101 // See http://www.bluetooth.org/Technical/AssignedNumbers/service_discovery.htm -#define L2CAP_UUID 0x0100 - /* Used for RFCOMM */ #define RFCOMM_SABM 0x2F #define RFCOMM_UA 0x63