From 780bd4e968cb6c237ba16c1c8d88c14b2f0d1013 Mon Sep 17 00:00:00 2001 From: Oleg Mazurov Date: Thu, 12 Sep 2019 10:15:33 -0600 Subject: [PATCH] Update README.md --- README.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/README.md b/README.md index e27d7d7f..e021aa65 100644 --- a/README.md +++ b/README.md @@ -106,7 +106,7 @@ Currently the following boards are supported by the library: * All official Arduino AVR boards (Uno, Duemilanove, Mega, Mega 2560, Mega ADK, Leonardo etc.) * Arduino Due, Intel Galileo, Intel Galileo 2, and Intel Edison - * Note that the Intel Galileo uses pin 2 and 3 as INT and SS pin respectively by default, so some modifications to the shield are needed. See the "Interface modifications" section in the [hardware manual](https://www.circuitsathome.com/usb-host-shield-hardware-manual) for more information. + * Note that the Intel Galileo uses pin 2 and 3 as INT and SS pin respectively by default, so some modifications to the shield are needed. See the "Interface modifications" section in the [hardware manual](https://chome.nerpa.tech/usb-host-shield-hardware-manual) for more information. * Note native USB host is not supported on any of these platforms. You will have to use the shield for now. * Teensy (Teensy++ 1.0, Teensy 2.0, Teensy++ 2.0, Teensy 3.x, and Teensy LC) * Note if you are using the Teensy 3.x you should download this SPI library as well: . You should then add ```#include ``` to your .ino file. @@ -115,7 +115,7 @@ Currently the following boards are supported by the library: * Black Widdow * RedBearLab nRF51822 * Digilent chipKIT - * Please see: . + * Please see: . * STM32F4 * Currently the [NUCLEO-F446RE](http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/LN1847/PF262063) is supported featuring the STM32F446. Take a look at the following example code: . * ESP8266 is supported using the [ESP8266 Arduino core](https://github.com/esp8266/Arduino)