Add ESP32 pin settings

.travis.yml

@@ -75,4 +75,4 @@ install:
 
 script:
     - platformio ci --lib="." --board=uno --board=due --board=genuino101 --board=teensy30 --board=teensy31 --board=teensy35 --board=teensy36 --board=teensylc
-    - platformio ci --lib="." --board=esp12e --board=nodemcu --project-option="build_flags=-Wno-unused-function" # Workaround https://github.com/esp8266/Arduino/pull/2881
+    - platformio ci --lib="." --board=esp12e --board=nodemcu --board=esp32dev --project-option="build_flags=-Wno-unused-function" # Workaround https://github.com/esp8266/Arduino/pull/2881

README.md

@@ -128,6 +128,8 @@ Currently the following boards are supported by the library:
     * Also please be aware that:
       * GPIO16 is **NOT** usable, as it will be used for some other purposes. For example, reset the SoC itself from sleep mode.
       * GPIO6 to 11 is also **NOT** usable, as they are used to connect SPI flash chip and it is used for storing the executable binary content.
+* ESP32 is supported using the [arduino-esp32](https://github.com/espressif/arduino-esp32/)
+    * GPIO5 : SS, GPIO17 : INT, GPIO18 : SCK, GPIO19 : MISO, GPIO23 : MOSI
 
 The following boards need to be activated manually in [settings.h](settings.h):
 

UsbCore.h

@@ -41,6 +41,8 @@ typedef MAX3421e<P20, P19> MAX3421E; // Balanduino
 typedef MAX3421e<P3, P2> MAX3421E; // The Intel Galileo supports much faster read and write speed at pin 2 and 3
 #elif defined(ESP8266)
 typedef MAX3421e<P15, P5> MAX3421E; // ESP8266 boards
+#elif defined(ESP32)
+typedef MAX3421e<P5, P17> MAX3421E; // ESP32 boards
 #else
 typedef MAX3421e<P10, P9> MAX3421E; // Official Arduinos (UNO, Duemilanove, Mega, 2560, Leonardo, Due etc.), Intel Edison, Intel Galileo 2 or Teensy 2.0 and 3.x
 #endif

avrpins.h

@@ -1326,9 +1326,8 @@ MAKE_PIN(P13, 13); //
 
 #undef MAKE_PIN
 
-#elif defined(ESP8266)
+#elif defined(ESP8266) || defined(ESP32)
 
-#define pgm_read_pointer(p) pgm_read_ptr(p)
 
 #define MAKE_PIN(className, pin) \
 class className { \
@@ -1350,6 +1349,10 @@ public: \
   } \
 };
 
+#if defined(ESP8266)
+
+#define pgm_read_pointer(p) pgm_read_ptr(p)
+
 // Pinout for ESP-12 module
 // 0 .. 16 - Digital pins
 // GPIO 6 to 11 and 16 are not usable in this library.
@@ -1365,6 +1368,24 @@ MAKE_PIN(P13, 13); // MOSI
 MAKE_PIN(P14, 14); // SCK
 MAKE_PIN(P15, 15); // SS
 
+#elif defined(ESP32)
+
+// Pinout for ESP32 dev module
+
+MAKE_PIN(P0, 0);
+MAKE_PIN(P1, 1); // TX0
+MAKE_PIN(P10, 10); // TX1
+MAKE_PIN(P3, 3); // RX0
+MAKE_PIN(P21, 21); // SDA
+MAKE_PIN(P22, 22); // SCL
+MAKE_PIN(P19, 19); // MISO
+MAKE_PIN(P23, 23); // MOSI
+MAKE_PIN(P18, 18); // SCK
+MAKE_PIN(P5, 5); // SS
+MAKE_PIN(P17, 17); // INT
+
+#endif
+
 #undef MAKE_PIN
 
 #else

controllerEnums.h

@@ -18,6 +18,10 @@
 #ifndef _controllerenums_h
 #define _controllerenums_h
 
+#if defined(ESP32)
+#undef PS
+#endif
+
 /**
  * This header file is used to store different enums for the controllers,
  * This is necessary so all the different libraries can be used at once.

library.json

@@ -51,6 +51,7 @@
     "atmelsam",
     "nordicnrf51",
     "ststm32",
-    "espressif8266"
+    "espressif8266",
+    "espressif32"
   ]
 }

usbhost.h

@@ -111,6 +111,8 @@ typedef SPi< P76, P75, P74, P10 > spi;
 typedef SPi< P16, P18, P17, P10 > spi;
 #elif defined(ESP8266)
 typedef SPi< P14, P13, P12, P15 > spi;
+#elif defined(ESP32)
+typedef SPi< P18, P23, P19, P5 > spi;
 #else
 #error "No SPI entry in usbhost.h"
 #endif
@@ -176,7 +178,7 @@ void MAX3421e< SPI_SS, INTR >::regWr(uint8_t reg, uint8_t data) {
         c[0] = reg | 0x02;
         c[1] = data;
         spi4teensy3::send(c, 2);
-#elif defined(SPI_HAS_TRANSACTION) && !defined(ESP8266)
+#elif defined(SPI_HAS_TRANSACTION) && !defined(ESP8266) && !defined(ESP32)
         uint8_t c[2];
         c[0] = reg | 0x02;
         c[1] = data;
@@ -186,7 +188,7 @@ void MAX3421e< SPI_SS, INTR >::regWr(uint8_t reg, uint8_t data) {
         c[0] = reg | 0x02;
         c[1] = data;
         HAL_SPI_Transmit(&SPI_Handle, c, 2, HAL_MAX_DELAY);
-#elif !defined(SPDR) // ESP8266
+#elif !defined(SPDR) // ESP8266, ESP32
         USB_SPI.transfer(reg | 0x02);
         USB_SPI.transfer(data);
 #else
@@ -218,7 +220,7 @@ uint8_t* MAX3421e< SPI_SS, INTR >::bytesWr(uint8_t reg, uint8_t nbytes, uint8_t*
         spi4teensy3::send(reg | 0x02);
         spi4teensy3::send(data_p, nbytes);
         data_p += nbytes;
-#elif defined(SPI_HAS_TRANSACTION) && !defined(ESP8266)
+#elif defined(SPI_HAS_TRANSACTION) && !defined(ESP8266) && !defined(ESP32)
         USB_SPI.transfer(reg | 0x02);
         USB_SPI.transfer(data_p, nbytes);
         data_p += nbytes;
@@ -231,7 +233,7 @@ uint8_t* MAX3421e< SPI_SS, INTR >::bytesWr(uint8_t reg, uint8_t nbytes, uint8_t*
         HAL_SPI_Transmit(&SPI_Handle, &data, 1, HAL_MAX_DELAY);
         HAL_SPI_Transmit(&SPI_Handle, data_p, nbytes, HAL_MAX_DELAY);
         data_p += nbytes;
-#elif !defined(SPDR) // ESP8266
+#elif !defined(SPDR) // ESP8266, ESP32
         USB_SPI.transfer(reg | 0x02);
         while(nbytes) {
                 USB_SPI.transfer(*data_p);
@@ -320,7 +322,7 @@ uint8_t* MAX3421e< SPI_SS, INTR >::bytesRd(uint8_t reg, uint8_t nbytes, uint8_t*
         spi4teensy3::send(reg);
         spi4teensy3::receive(data_p, nbytes);
         data_p += nbytes;
-#elif defined(SPI_HAS_TRANSACTION) && !defined(ESP8266)
+#elif defined(SPI_HAS_TRANSACTION) && !defined(ESP8266) && !defined(ESP32)
         USB_SPI.transfer(reg);
         memset(data_p, 0, nbytes); // Make sure we send out empty bytes
         USB_SPI.transfer(data_p, nbytes);
@@ -334,7 +336,7 @@ uint8_t* MAX3421e< SPI_SS, INTR >::bytesRd(uint8_t reg, uint8_t nbytes, uint8_t*
         memset(data_p, 0, nbytes); // Make sure we send out empty bytes
         HAL_SPI_Receive(&SPI_Handle, data_p, nbytes, HAL_MAX_DELAY);
         data_p += nbytes;
-#elif !defined(SPDR) // ESP8266
+#elif !defined(SPDR) // ESP8266, ESP32
         USB_SPI.transfer(reg);
         while(nbytes) {
             *data_p++ = USB_SPI.transfer(0);