diff --git a/README.md b/README.md
index ac543395..146fc47f 100644
--- a/README.md
+++ b/README.md
@@ -94,7 +94,7 @@ Currently the following boards are supported by the library:
 * All official Arduino AVR boards (Uno, Duemilanove, Mega, Mega 2560, Mega ADK, Leonardo etc.)
 * Arduino Due, Intel Galileo, Intel Galileo 2, and Intel Edison
     * If you are using the Arduino Due, Intel Galileo or Intel Galileo 2, then you must include the Arduino SPI library like so: ```#include <SPI.h>``` in your .ino file.
-    * Note that both the Intel Galileo and Intel Galileo 2 use pin 2 and 3 as INT and SS pin respectively by default, so some modifications to the shield are needed. See the "Interface modifications" section in the [hardware manual](https://www.circuitsathome.com/usb-host-shield-hardware-manual) for more information.
+    * Note that the Intel Galileo uses pin 2 and 3 as INT and SS pin respectively by default, so some modifications to the shield are needed. See the "Interface modifications" section in the [hardware manual](https://www.circuitsathome.com/usb-host-shield-hardware-manual) for more information.
 * Teensy (Teensy++ 1.0, Teensy 2.0, Teensy++ 2.0, and Teensy 3.x)
     * Note if you are using the Teensy 3.x you should download this SPI library as well: <https://github.com/xxxajk/spi4teensy3>. You should then add ```#include <spi4teensy3.h>``` to your .ino file.
 * Balanduino
diff --git a/UsbCore.h b/UsbCore.h
index 0b1ded02..5c6c7710 100644
--- a/UsbCore.h
+++ b/UsbCore.h
@@ -37,10 +37,10 @@ typedef MAX3421e<P9, P8> MAX3421E; // Teensy++ 1.0 and 2.0
 typedef MAX3421e<P53, P54> MAX3421E; // Arduino Mega ADK
 #elif defined(ARDUINO_AVR_BALANDUINO)
 typedef MAX3421e<P20, P19> MAX3421E; // Balanduino
-#elif defined(__ARDUINO_X86__)
-typedef MAX3421e<P3, P2> MAX3421E; // The Intel Galileo and Intel Galileo 2 both support much faster read and write speed at pin 2 and 3
+#elif defined(__ARDUINO_X86__) && PLATFORM_ID == 0x06
+typedef MAX3421e<P3, P2> MAX3421E; // The Intel Galileo supports much faster read and write speed at pin 2 and 3
 #else
-typedef MAX3421e<P10, P9> MAX3421E; // Official Arduinos (UNO, Duemilanove, Mega, 2560, Leonardo, Due etc.), Intel Edison or Teensy 2.0 and 3.0
+typedef MAX3421e<P10, P9> MAX3421E; // Official Arduinos (UNO, Duemilanove, Mega, 2560, Leonardo, Due etc.), Intel Edison, Intel Galileo 2 or Teensy 2.0 and 3.0
 #endif
 
 /* Common setup data constant combinations  */
diff --git a/avrpins.h b/avrpins.h
index 2b94d609..4e60e3a2 100644
--- a/avrpins.h
+++ b/avrpins.h
@@ -1026,10 +1026,8 @@ MAKE_PIN(P24, Pin_nRF51822_to_Arduino(D24));
 #define pinToFastPin(pin) 1 // As far as I can tell all pins can be used as fast pins
 #endif
 
-// Pin 2 and 3 on the Intel Galileo 1 & 2 support a higher rate,
+// Pin 2 and 3 on the Intel Galileo supports a higher rate,
 // so it is recommended to use one of these as the SS pin.
-// I know Intel Galileo 2 support higher rate at some other pins as well,
-// but 2 and 3 are only available on the original Intel Galileo.
 
 #define MAKE_PIN(className, pin) \
 class className { \