Optimize mouse code, add notes.

This commit is contained in:
Andrew J. Kroll 2013-12-25 04:49:01 -05:00
parent d17e1f94cb
commit b8fb19fb90
2 changed files with 130 additions and 42 deletions

View file

@ -18,7 +18,10 @@ e-mail : support@circuitsathome.com
void MouseReportParser::Parse(HID *hid, bool is_rpt_id, uint8_t len, uint8_t *buf) {
MOUSEINFO *pmi = (MOUSEINFO*)buf;
// Future:
// bool event;
#if 0
if (prevState.mouseInfo.bmLeftButton == 0 && pmi->bmLeftButton == 1)
OnLeftButtonDown(pmi);
@ -43,6 +46,82 @@ void MouseReportParser::Parse(HID *hid, bool is_rpt_id, uint8_t len, uint8_t *bu
if (len > sizeof (MOUSEINFO))
for (uint8_t i = 0; i<sizeof (MOUSEINFO); i++)
prevState.bInfo[i] = buf[i];
#else
//
// Optimization idea:
//
// 1: Don't pass the structure on every event. Buttons would not need it.
// 2: Only pass x/y values in the movement routine.
//
// These two changes (with the ones I have made) will save extra flash.
// The only "bad" thing is that it could break old code.
//
// Future thoughts:
//
// The extra space gained can be used for a generic mouse event that can be called
// when there are _ANY_ changes. This one you _MAY_ want to pass everything, however the
// sketch could already have noted these facts to support drag/drop scroll wheel stuff, etc.
//
// Why do we need to pass the structure for buttons?
// The function call not enough of a hint for what is happening?
if(prevState.mouseInfo.bmLeftButton != pmi->bmLeftButton ) {
if(pmi->bmLeftButton) {
OnLeftButtonDown(pmi);
} else {
OnLeftButtonUp(pmi);
}
// Future:
// event = true;
}
if(prevState.mouseInfo.bmRightButton != pmi->bmRightButton) {
if(pmi->bmRightButton) {
OnRightButtonDown(pmi);
} else {
OnRightButtonUp(pmi);
}
// Future:
// event = true;
}
if(prevState.mouseInfo.bmMiddleButton != prevState.mouseInfo.bmMiddleButton) {
if(pmi->bmMiddleButton) {
OnMiddleButtonDown(pmi);
} else {
OnMiddleButtonUp(pmi);
}
// Future:
// event = true;
}
//
// Scroll wheel(s), are not part of the spec, but we could support it.
// Logitech wireless keyboard and mouse combo reports scroll wheel in byte 4
// We wouldn't even need to save this information.
//if(len > 3) {
//}
//
// Mice only report motion when they actually move!
// Why not just pass the x/y values to simplify things??
if(pmi->dX || pmi->dY) {
OnMouseMove(pmi);
// Future:
// event = true;
}
//
// Future:
// Provide a callback that operates on the gathered events from above.
//
// if(event) OnMouse();
//
// Only the first byte matters (buttons). We do NOT need to save position info.
prevState.bInfo[0] = buf[0];
#endif
};
void KeyboardReportParser::Parse(HID *hid, bool is_rpt_id, uint8_t len, uint8_t *buf) {
@ -124,15 +203,15 @@ uint8_t KeyboardReportParser::OemToAscii(uint8_t mod, uint8_t key) {
else
return ((key == UHS_HID_BOOT_KEY_ZERO) ? '0' : key - 0x1e + '1');
}// Keypad Numbers
else if (VALUE_WITHIN(key, 0x59, 0x61)) {
if (kbdLockingKeys.kbdLeds.bmNumLock == 1)
else if(VALUE_WITHIN(key, 0x59, 0x61)) {
if(kbdLockingKeys.kbdLeds.bmNumLock == 1)
return (key - 0x59 + '1');
} else if (VALUE_WITHIN(key, 0x2d, 0x38))
} else if(VALUE_WITHIN(key, 0x2d, 0x38))
return ((shift) ? (uint8_t)pgm_read_byte(&getSymKeysUp()[key - 0x2d]) : (uint8_t)pgm_read_byte(&getSymKeysLo()[key - 0x2d]));
else if (VALUE_WITHIN(key, 0x54, 0x58))
else if(VALUE_WITHIN(key, 0x54, 0x58))
return (uint8_t)pgm_read_byte(&getPadKeys()[key - 0x54]);
else {
switch (key) {
switch(key) {
case UHS_HID_BOOT_KEY_SPACE: return (0x20);
case UHS_HID_BOOT_KEY_ENTER: return (0x13);
case UHS_HID_BOOT_KEY_ZERO2: return ((kbdLockingKeys.kbdLeds.bmNumLock == 1) ? '0': 0);

View file

@ -52,7 +52,7 @@ class MouseReportParser : public HIDReportParser {
union {
MOUSEINFO mouseInfo;
uint8_t bInfo[sizeof(MOUSEINFO)];
uint8_t bInfo[sizeof (MOUSEINFO)];
} prevState;
public:
@ -128,7 +128,7 @@ protected:
union {
KBDINFO kbdInfo;
uint8_t bInfo[sizeof(KBDINFO)];
uint8_t bInfo[sizeof (KBDINFO)];
} prevState;
union {
@ -245,7 +245,7 @@ void HIDBoot<BOOT_PROTOCOL>::Initialize() {
template <const uint8_t BOOT_PROTOCOL>
uint8_t HIDBoot<BOOT_PROTOCOL>::Init(uint8_t parent, uint8_t port, bool lowspeed) {
const uint8_t constBufSize = sizeof(USB_DEVICE_DESCRIPTOR);
const uint8_t constBufSize = sizeof (USB_DEVICE_DESCRIPTOR);
uint8_t buf[constBufSize];
uint8_t rcode;
@ -287,7 +287,7 @@ uint8_t HIDBoot<BOOT_PROTOCOL>::Init(uint8_t parent, uint8_t port, bool lowspeed
p->lowspeed = lowspeed;
// Get device descriptor
rcode = pUsb->getDevDescr(0, 0, 8, (uint8_t*) buf);
rcode = pUsb->getDevDescr(0, 0, 8, (uint8_t*)buf);
if(!rcode)
len = (buf[0] > constBufSize) ? constBufSize : buf[0];
@ -309,7 +309,7 @@ uint8_t HIDBoot<BOOT_PROTOCOL>::Init(uint8_t parent, uint8_t port, bool lowspeed
return USB_ERROR_OUT_OF_ADDRESS_SPACE_IN_POOL;
// Extract Max Packet Size from the device descriptor
epInfo[0].maxPktSize = (uint8_t) ((USB_DEVICE_DESCRIPTOR*) buf)->bMaxPacketSize0;
epInfo[0].maxPktSize = (uint8_t)((USB_DEVICE_DESCRIPTOR*)buf)->bMaxPacketSize0;
// Assign new address to the device
rcode = pUsb->setAddr(0, 0, bAddress);
@ -335,12 +335,12 @@ uint8_t HIDBoot<BOOT_PROTOCOL>::Init(uint8_t parent, uint8_t port, bool lowspeed
p->lowspeed = lowspeed;
if(len)
rcode = pUsb->getDevDescr(bAddress, 0, len, (uint8_t*) buf);
rcode = pUsb->getDevDescr(bAddress, 0, len, (uint8_t*)buf);
if(rcode)
goto FailGetDevDescr;
num_of_conf = ((USB_DEVICE_DESCRIPTOR*) buf)->bNumConfigurations;
num_of_conf = ((USB_DEVICE_DESCRIPTOR*)buf)->bNumConfigurations;
USBTRACE2("NC:", num_of_conf);
@ -355,7 +355,7 @@ uint8_t HIDBoot<BOOT_PROTOCOL>::Init(uint8_t parent, uint8_t port, bool lowspeed
confDescrParser.SetOR(); // Use the OR variant.
for(uint8_t i = 0; i < num_of_conf; i++) {
pUsb->getConfDescr(bAddress, 0, i, &confDescrParser);
if(bNumEP == (uint8_t) (totalEndpoints(BOOT_PROTOCOL)))
if(bNumEP == (uint8_t)(totalEndpoints(BOOT_PROTOCOL)))
break;
}
} else {
@ -370,7 +370,7 @@ uint8_t HIDBoot<BOOT_PROTOCOL>::Init(uint8_t parent, uint8_t port, bool lowspeed
CP_MASK_COMPARE_ALL> confDescrParserA(this);
pUsb->getConfDescr(bAddress, 0, i, &confDescrParserA);
if(bNumEP == (uint8_t) (totalEndpoints(BOOT_PROTOCOL)))
if(bNumEP == (uint8_t)(totalEndpoints(BOOT_PROTOCOL)))
break;
}
}
@ -386,7 +386,7 @@ uint8_t HIDBoot<BOOT_PROTOCOL>::Init(uint8_t parent, uint8_t port, bool lowspeed
CP_MASK_COMPARE_ALL> confDescrParserB(this);
pUsb->getConfDescr(bAddress, 0, i, &confDescrParserB);
if(bNumEP == ((uint8_t) (totalEndpoints(BOOT_PROTOCOL))))
if(bNumEP == ((uint8_t)(totalEndpoints(BOOT_PROTOCOL))))
break;
}
@ -394,7 +394,7 @@ uint8_t HIDBoot<BOOT_PROTOCOL>::Init(uint8_t parent, uint8_t port, bool lowspeed
}
USBTRACE2("bNumEP:", bNumEP);
if(bNumEP != (uint8_t) (totalEndpoints(BOOT_PROTOCOL))) {
if(bNumEP != (uint8_t)(totalEndpoints(BOOT_PROTOCOL))) {
rcode = USB_DEV_CONFIG_ERROR_DEVICE_NOT_SUPPORTED;
goto Fail;
}
@ -425,7 +425,7 @@ uint8_t HIDBoot<BOOT_PROTOCOL>::Init(uint8_t parent, uint8_t port, bool lowspeed
USBTRACE2("PROTOCOL SET HID_BOOT rcode:", rcode);
rcode = SetIdle(i, 0, 0);
USBTRACE2("SET_IDLE rcode:", rcode);
if(rcode) goto FailSetIdle;
// if(rcode) goto FailSetIdle; This can fail.
// Get the RPIPE and just throw it away.
SinkParser<USBReadParser, uint16_t, uint16_t> sink;
rcode = GetReportDescr(i, &sink);
@ -480,10 +480,10 @@ FailSetProtocol:
goto Fail;
#endif
FailSetIdle:
#ifdef DEBUG_USB_HOST
USBTRACE("SetIdle:");
#endif
//FailSetIdle:
//#ifdef DEBUG_USB_HOST
// USBTRACE("SetIdle:");
//#endif
Fail:
#ifdef DEBUG_USB_HOST
@ -510,7 +510,7 @@ void HIDBoot<BOOT_PROTOCOL>::EndpointXtract(uint8_t conf, uint8_t iface, uint8_t
// Fill in the endpoint info structure
epInfo[bNumEP].epAddr = (pep->bEndpointAddress & 0x0F);
epInfo[bNumEP].maxPktSize = (uint8_t) pep->wMaxPacketSize;
epInfo[bNumEP].maxPktSize = (uint8_t)pep->wMaxPacketSize;
epInfo[bNumEP].epAttribs = 0;
epInfo[bNumEP].bmNakPower = USB_NAK_NOWAIT;
bNumEP++;
@ -538,35 +538,44 @@ uint8_t HIDBoot<BOOT_PROTOCOL>::Poll() {
if(bPollEnable && qNextPollTime <= millis()) {
// To-do: optimize manually, getting rid of the loop
// To-do: optimize manually, using the for loop only if needed.
for(int i = 0; i < epMUL(BOOT_PROTOCOL); i++) {
const uint8_t const_buff_len = 16;
const uint16_t const_buff_len = 16;
uint8_t buf[const_buff_len];
USBTRACE3("(hidboot.h) i=", i, 0x81);
USBTRACE3("(hidboot.h) epInfo[epInterruptInIndex + i].epAddr=", epInfo[epInterruptInIndex + i].epAddr, 0x81);
USBTRACE3("(hidboot.h) epInfo[epInterruptInIndex + i].maxPktSize=", epInfo[epInterruptInIndex + i].maxPktSize, 0x81);
uint16_t read = (uint16_t) epInfo[epInterruptInIndex + i].maxPktSize;
uint16_t read = (uint16_t)epInfo[epInterruptInIndex + i].maxPktSize;
uint8_t rcode = pUsb->inTransfer(bAddress, epInfo[epInterruptInIndex + i].epAddr, &read, buf);
if(!rcode) {
rcode = pUsb->inTransfer(bAddress, epInfo[epInterruptInIndex + i].epAddr, &read, buf);
// SOME buggy dongles report extra keys (like sleep) using a 2 byte packet on the wrong endpoint.
// Since keyboard and mice must report at least 3 bytes, we ignore the extra data.
if(!rcode && read > 2) {
if(pRptParser[i])
pRptParser[i]->Parse((HID*)this, 0, (uint8_t) read, buf);
#if 0 // Set this to 1 to print the incoming data
for(uint8_t i = 0; i < read; i++) {
PrintHex<uint8_t > (buf[i], 0x80);
USB_HOST_SERIAL.write(' ');
}
if(read)
USB_HOST_SERIAL.println();
#endif
pRptParser[i]->Parse((HID*)this, 0, (uint8_t)read, buf);
#ifdef DEBUG_USB_HOST
// We really don't care about errors and anomalies unless we are debugging.
} else {
if(rcode != hrNAK) {
USBTRACE3("(hidboot.h) Poll:", rcode, 0x81);
//break;
}
if(!rcode && read) {
USBTRACE3("(hidboot.h) Strange read count: ", read, 0x80);
USBTRACE3("(hidboot.h) Interface:", i, 0x80);
}
}
if(!rcode && read && (UsbDEBUGlvl > 0x7f)) {
for(uint8_t i = 0; i < read; i++) {
PrintHex<uint8_t > (buf[i], 0x80);
USBTRACE1(" ", 0x80);
}
if(read)
USBTRACE1("\r\n", 0x80);
#endif
}
}
qNextPollTime = millis() + bInterval;
}