specchioriflesso/USB_Host_Shield_2.0
1
Fork 0
mirror of https://github.com/felis/USB_Host_Shield_2.0.git synced 2024-03-22 11:31:26 +01:00
Code Issues Projects Releases Packages Wiki Activity

Added "Interface modifications" section to readme

Browse source
This commit is contained in:
Kristian Lauszus 2014-07-01 11:31:45 +02:00
parent e78d880bb4
commit c589731974
1 changed files with 20 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

20
README.md
View file

@ -253,6 +253,26 @@ More information about the controller can be found at the following sites:
* http://www.developerfusion.com/article/84338/making-usb-c-friendly/ * http://www.developerfusion.com/article/84338/making-usb-c-friendly/
* https://github.com/torvalds/linux/blob/master/drivers/hid/hid-sony.c * https://github.com/torvalds/linux/blob/master/drivers/hid/hid-sony.c
# Interface modifications
The shield is using SPI for communicating with the MAX3421E USB host controller. It uses the SCK, MISO and MOSI pins via the ICSP on your board.
Furthermore it uses one pin as SS and one INT pin. These are by default located on pin 10 and 9 respectively. They can easily be reconfigured in case you need to use them for something else by cutting the jumper on the shield and then solder a wire from the pad to the new pin.
After that you need modify the following entry in [UsbCore.h](UsbCore.h):
```C++
typedef MAX3421e<P10, P9> MAX3421E;
```
For instance if you have rerouted SS to pin 7 it should read:
```C++
typedef MAX3421e<P7, P9> MAX3421E;
```
See the "Interface modifications" section in the [hardware manual](https://www.circuitsathome.com/usb-host-shield-hardware-manual) for more information.
# FAQ # FAQ
> When I plug my device into the USB connector nothing happens? > When I plug my device into the USB connector nothing happens?