regression

Usb.h

@@ -47,8 +47,16 @@ e-mail   :  support@circuitsathome.com
 
 /* shield pins. First parameter - SS pin, second parameter - INT pin */
 
+#if defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
+#define BOARD_TEENSY_PLUS_PLUS
+#endif
+
 #ifdef BOARD_BLACK_WIDDOW
 typedef MAX3421e<P6, P3>		MAX3421E;		// Black Widow
+#elif defined(BOARD_TEENSY_PLUS_PLUS)
+typedef MAX3421e<P9, P8>        MAX3421E;       // Teensy++ 2.0 & 1.0
+#elif defined(BOARD_MEGA_ADK)
+typedef MAX3421e<P53, P54>              MAX3421E;               // Arduino Mega ADK
 #else
 typedef MAX3421e<P10, P9>		MAX3421E;		// Official Arduinos (UNO, Duemilanove, Mega, 2560
 #endif
@@ -272,4 +280,4 @@ inline uint8_t USB::setConf( uint8_t addr, uint8_t ep, uint8_t conf_value )
 
 #endif // defined(USB_METHODS_INLINE)
 
-#endif //_usb_h_
+#endif //_usb_h_

adk.cpp

@@ -48,12 +48,10 @@ ADK::ADK(USB *p,  const char* manufacturer,
 	for(uint8_t i=0; i<ADK_MAX_ENDPOINTS; i++) {
 		epInfo[i].epAddr		= 0;
 		epInfo[i].maxPktSize	= (i) ? 0 : 8;
-		epInfo[i].epAttribs		= ( 0xfc & ( USB_NAK_MAX_POWER<<2 ));
+		epInfo[i].epAttribs		= 0;
+		epInfo[i].bmNakPower  = (i) ? USB_NAK_NOWAIT : USB_NAK_MAX_POWER;
   }//for(uint8_t i=0; i<ADK_MAX_ENDPOINTS; i++...
-  
+    
-  //set bulk-IN EP naklimit to 1 
-  epInfo[epDataInIndex].epAttribs = ( 0xfc & ( USB_NAK_NOWAIT<<2 ));
-  
   // register in USB subsystem
 	if (pUsb) {
 		pUsb->RegisterDeviceClass(this);  //set devConfig[] entry
@@ -157,7 +155,16 @@ uint8_t ADK::Init(uint8_t parent, uint8_t port, bool lowspeed)
 
 		          for (uint8_t i=0; i<num_of_conf; i++) {
 			          ConfigDescParser<0, 0, 0, 0> confDescrParser(this);
+	    			    delay(1);
 	    			    rcode = pUsb->getConfDescr(bAddress, 0, i, &confDescrParser);
+#if defined(XOOM)
+                //added by Jaylen Scott Vanorden
+                if( rcode ) {
+                  USBTRACE2("\r\nGot 1st bad code for config: ", rcode);
+                  // Try once more
+                 rcode = pUsb->getConfDescr(bAddress, 0, i, &confDescrParser);
+                }
+#endif
                 if( rcode ) {
                   goto FailGetConfDescr;
                 }
@@ -204,7 +211,16 @@ uint8_t ADK::Init(uint8_t parent, uint8_t port, bool lowspeed)
 		//probe device - get accessory protocol revision
 		{
 		  uint16_t adkproto = -1;
+		  delay(1);
 		  rcode = getProto((uint8_t*)&adkproto );
+#if defined(XOOM)
+      //added by Jaylen Scott Vanorden
+      if( rcode ) {
+        USBTRACE2("\r\nGot 1st bad code for proto: ", rcode);
+        // Try once more
+        rcode = getProto((uint8_t*)&adkproto );
+      }          
+#endif
 		  if( rcode ){
 		    goto FailGetProto; //init fails
 		  }

adk.h

@@ -44,6 +44,10 @@ e-mail   :  support@circuitsathome.com
 #define ADK_PID   0x2D00
 #define ADB_PID   0x2D01
 
+#define XOOM  //enables repeating getProto() and getConf() attempts
+              //necessary for slow devices such as Motorola XOOM
+              //defined by default, can be commented out to save memory
+
 /* requests */
 
 #define ADK_GETPROTO      51  //check USB accessory protocol version
@@ -105,7 +109,7 @@ public:
                   const char* uri,
                   const char* serial);
 
-	// Methods for recieving and sending data
+	// Methods for receiving and sending data
 	uint8_t RcvData(uint16_t *nbytesptr, uint8_t *dataptr);
 	uint8_t SndData(uint16_t nbytes, uint8_t *dataptr);
 

avrpins.h

@@ -20,6 +20,10 @@ e-mail   :  support@circuitsathome.com
 #ifndef _avrpins_h_
 #define _avrpins_h_
 
+/* Uncomment the following if you have Arduino Mega ADK board with MAX3421e built-in */
+//#define BOARD_MEGA_ADK
+
+
 #include <avr/io.h>
 
 #ifdef PORTA
@@ -465,6 +469,7 @@ template<typename Tp_pin, typename Tc_bit>
 #define P51 Pb2
 #define P52 Pb1
 #define P53 Pb0
+#define P54 Pj2
 
 #endif  //"Mega" pin numbers
 

confdescparser.h

@@ -110,7 +110,7 @@ bool ConfigDescParser<CLASS_ID, SUBCLASS_ID, PROTOCOL_ID, MASK>::ParseDescriptor
         dscrType		= *((uint8_t*)theBuffer.pValue + 1); 
 		stateParseDescr	= 2;
 	case 2:
-		// This is a sort of hack. Assuming that two bytes are allready in the buffer 
+		// This is a sort of hack. Assuming that two bytes are already in the buffer 
 		//	the pointer is positioned two bytes ahead in order for the rest of descriptor 
 		//	to be read right after the size and the type fields.
 		// This should be used carefuly. varBuffer should be used directly to handle data

usbhost.h

@@ -86,6 +86,11 @@ MAX3421e< SS, INTR >::MAX3421e()
   SS::Set();
   spi::init();
   INTR::SetDirRead();
+#ifdef BOARD_MEGA_ADK  
+  /* For Mega ADK, which has Max3421e on-board, set MAX_RESET to Output mode, and pull Reset to HIGH */
+  DDRJ |= 0x04;
+  PORTJ |= 0x04;
+#endif  
 
   /* MAX3421E - full-duplex SPI, level interrupt */
   regWr( rPINCTL,( bmFDUPSPI + bmINTLEVEL ));