From 67a89697110d19b0f19d7d7b214eaecf14d1800d Mon Sep 17 00:00:00 2001 From: Kristian Lauszus Date: Sun, 27 May 2012 16:12:27 +0200 Subject: [PATCH 1/3] A few minor changes --- PS3USB.cpp | 52 ++++++++++++++++++++++++++-------------------------- PS3USB.h | 7 ++----- 2 files changed, 28 insertions(+), 31 deletions(-) diff --git a/PS3USB.cpp b/PS3USB.cpp index ed718110..5fa13abd 100644 --- a/PS3USB.cpp +++ b/PS3USB.cpp @@ -74,7 +74,7 @@ uint8_t PS3USB::Init(uint8_t parent, uint8_t port, bool lowspeed) // get memory address of USB device address pool AddressPool &addrPool = pUsb->GetAddressPool(); #ifdef EXTRADEBUG - Notify(PSTR("\r\nPS3BT Init")); + Notify(PSTR("\r\nPS3USB Init")); #endif // check if address has already been assigned to an instance if (bAddress) @@ -209,17 +209,14 @@ uint8_t PS3USB::Init(uint8_t parent, uint8_t port, bool lowspeed) /* Set internal bluetooth address and request for data */ setBdaddr(my_bdaddr); enable_sixaxis(); + setLedOn(LED1); // Needed for PS3 Dualshock and Navigation commands to work for (uint8_t i = 0; i < PS3_REPORT_BUFFER_SIZE; i++) writeBuf[i] = pgm_read_byte(&PS3_REPORT_BUFFER[i]); for (uint8_t i = 6; i < 10; i++) - readBuf[i] = 0x7F; // Set the analog joystick values to center position - - setLedOn(LED1); - - timer = millis(); + readBuf[i] = 0x7F; // Set the analog joystick values to center position } else // must be a Motion controller { @@ -232,9 +229,7 @@ uint8_t PS3USB::Init(uint8_t parent, uint8_t port, bool lowspeed) // Needed for Move commands to work for (uint8_t i = 0; i < MOVE_REPORT_BUFFER_SIZE; i++) - writeBuf[i] = pgm_read_byte(&MOVE_REPORT_BUFFER[i]); - - timer = millis(); + writeBuf[i] = pgm_read_byte(&MOVE_REPORT_BUFFER[i]); } } else @@ -242,6 +237,7 @@ uint8_t PS3USB::Init(uint8_t parent, uint8_t port, bool lowspeed) bPollEnable = true; Notify(PSTR("\r\n")); + timer = millis(); return 0; // successful configuration /* diagnostic messages */ @@ -377,34 +373,37 @@ uint8_t PS3USB::getAnalogHat(AnalogHat a) return 0; return (uint8_t)(readBuf[(uint16_t)a]); } -int32_t PS3USB::getSensor(Sensor a) +uint16_t PS3USB::getSensor(Sensor a) { if (readBuf == NULL) return 0; return ((readBuf[(uint16_t)a] << 8) | readBuf[(uint16_t)a + 1]); } -double PS3USB::getAngle(Angle a) { - double accXval; - double accYval; - double accZval; - +double PS3USB::getAngle(Angle a) { if(PS3Connected) { + double accXval; + double accYval; + double accZval; + // Data for the Kionix KXPC4 used in the DualShock 3 const double zeroG = 511.5; // 1.65/3.3*1023 (1,65V) accXval = -((double)getSensor(aX)-zeroG); accYval = -((double)getSensor(aY)-zeroG); accZval = -((double)getSensor(aZ)-zeroG); - } - // Convert to 360 degrees resolution - // atan2 outputs the value of -π to π (radians) - // We are then converting it to 0 to 2π and then to degrees - if (a == Pitch) { - double angle = (atan2(accYval,accZval)+PI)*RAD_TO_DEG; - return angle; - } else { - double angle = (atan2(accXval,accZval)+PI)*RAD_TO_DEG; - return angle; - } + + // Convert to 360 degrees resolution + // atan2 outputs the value of -π to π (radians) + // We are then converting it to 0 to 2π and then to degrees + if (a == Pitch) { + double angle = (atan2(accYval,accZval)+PI)*RAD_TO_DEG; + return angle; + } else { + double angle = (atan2(accXval,accZval)+PI)*RAD_TO_DEG; + return angle; + } + } else + return 0; + } bool PS3USB::getStatus(Status c) { @@ -428,6 +427,7 @@ String PS3USB::getStatusString() strcat(statusOutput," - PowerRating: "); + if (getStatus(Charging)) strcat(statusOutput,"Charging"); else if (getStatus(NotCharging)) strcat(statusOutput,"Not Charging"); else if (getStatus(Shutdown)) strcat(statusOutput,"Shutdown"); diff --git a/PS3USB.h b/PS3USB.h index fb8fc25f..21550aea 100644 --- a/PS3USB.h +++ b/PS3USB.h @@ -46,9 +46,6 @@ #define PS3_REPORT_BUFFER_SIZE 48 // Size of the output report buffer for the Dualshock and Navigation controllers #define MOVE_REPORT_BUFFER_SIZE 7 // Size of the output report buffer for the Move Controller -// used in control endpoint header for HCI Commands -#define bmREQ_HCI_OUT USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_DEVICE - // used in control endpoint header for HID Commands #define bmREQ_HID_OUT USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_INTERFACE #define HID_REQUEST_SET_REPORT 0x09 @@ -163,7 +160,7 @@ enum Status CableRumble = (31 << 8) | 0x10, // Opperating by USB and rumble is turned on Cable = (31 << 8) | 0x12, // Opperating by USB and rumble is turned off BluetoothRumble = (31 << 8) | 0x14, // Opperating by bluetooth and rumble is turned on - Bluetooth = (30 << 8) | 0x16, // Opperating by bluetooth and rumble is turned off + Bluetooth = (31 << 8) | 0x16, // Opperating by bluetooth and rumble is turned off }; enum Rumble { @@ -190,7 +187,7 @@ public: bool getButton(Button b); uint8_t getAnalogButton(AnalogButton a); uint8_t getAnalogHat(AnalogHat a); - int32_t getSensor(Sensor a); + uint16_t getSensor(Sensor a); double getAngle(Angle a); bool getStatus(Status c); String getStatusString(); From 91fbbfad3b72349628778514dee48a32765fbce8 Mon Sep 17 00:00:00 2001 From: Kristian Lauszus Date: Mon, 28 May 2012 21:02:43 +0200 Subject: [PATCH 2/3] Fixed some errors --- PS3BT.cpp | 34 +++++++++++++++++----------------- PS3BT.h | 2 +- PS3USB.h | 2 +- 3 files changed, 19 insertions(+), 19 deletions(-) diff --git a/PS3BT.cpp b/PS3BT.cpp index 78712b6b..e47db9fe 100644 --- a/PS3BT.cpp +++ b/PS3BT.cpp @@ -464,25 +464,25 @@ int32_t PS3BT::getSensor(Sensor a) return 0; if (a == aX || a == aY || a == aZ || a == gZ) return ((l2capinbuf[(uint16_t)a] << 8) | l2capinbuf[(uint16_t)a + 1]); - else if (a == mXmove || a == mYmove || a == mZmove) + else if (a == mXmove || a == mYmove || a == mZmove) // These are all 12-bits long { // Might not be correct, haven't tested it yet - if (a == mXmove) + /*if (a == mXmove) return ((l2capinbuf[(uint16_t)a + 1] << 0x04) | (l2capinbuf[(uint16_t)a] << 0x0C)); - //return (((unsigned char)l2capinbuf[(unsigned int)a + 1]) | (((unsigned char)l2capinbuf[(unsigned int)a] & 0x0F)) << 8); else if (a == mYmove) return ((l2capinbuf[(uint16_t)a + 1] & 0xF0) | (l2capinbuf[(uint16_t)a] << 0x08)); - //return (((unsigned char)l2capinbuf[(unsigned int)a + 1]) | (((unsigned char)l2capinbuf[(unsigned int)a] & 0x0F)) << 8); else if (a == mZmove) - return ((l2capinbuf[(uint16_t)a + 1] << 0x0F) | (l2capinbuf[(uint16_t)a] << 0x0C)); - //return ((((unsigned char)l2capinbuf[(unsigned int)a + 1] & 0xF0) >> 4) | ((unsigned char)l2capinbuf[(unsigned int)a] << 4)); - else - return 0; + return ((l2capinbuf[(uint16_t)a + 1] << 0x0F) | (l2capinbuf[(uint16_t)a] << 0x0C)); + */ + if (a == mXmove || a == mYmove) + return (((l2capinbuf[(uint16_t)a] & 0x0F) << 8) | (l2capinbuf[(uint16_t)a + 1])); + else // mZmove + return ((l2capinbuf[(uint16_t)a] << 4) | (l2capinbuf[(uint16_t)a + 1] >> 4)); } - else if (a == tempMove) - return (((l2capinbuf[(uint16_t)a + 1] & 0xF0) >> 4) | (l2capinbuf[(uint16_t)a] << 4)); + else if (a == tempMove) // The tempearature is 12 bits long too + return ((l2capinbuf[(uint16_t)a] << 4) | ((l2capinbuf[(uint16_t)a + 1] & 0xF0) >> 4)); else // aXmove, aYmove, aZmove, gXmove, gYmove and gZmove - return ((l2capinbuf[(uint16_t)a + 1] << 8) | l2capinbuf[(uint16_t)a]); + return (l2capinbuf[(uint16_t)a] | (l2capinbuf[(uint16_t)a + 1] << 8)); } double PS3BT::getAngle(Angle a) { double accXval; @@ -946,14 +946,14 @@ void PS3BT::ACL_event_task() Notify(PSTR(" Identifier: ")); PrintHex(l2capinbuf[9]); */ - if ((l2capinbuf[13] | l2capinbuf[12]) == L2CAP_PSM_HID_CTRL) + if ((l2capinbuf[12] | (l2capinbuf[13] << 8)) == L2CAP_PSM_HID_CTRL) { identifier = l2capinbuf[9]; control_scid[0] = l2capinbuf[14]; control_scid[1] = l2capinbuf[15]; l2cap_event_flag |= L2CAP_EV_CONTROL_CONNECTION_REQUEST; } - else if ((l2capinbuf[13] | l2capinbuf[12]) == L2CAP_PSM_HID_INTR) + else if ((l2capinbuf[12] | (l2capinbuf[13] << 8)) == L2CAP_PSM_HID_INTR) { identifier = l2capinbuf[9]; interrupt_scid[0] = l2capinbuf[14]; @@ -1000,7 +1000,7 @@ void PS3BT::ACL_event_task() if (l2capinbuf[12] == control_dcid[0] && l2capinbuf[13] == control_dcid[1]) { #ifdef DEBUG - Notify(PSTR("\r\nDisconnected Request: Disconnected Control")); + Notify(PSTR("\r\nDisconnect Request: Control Channel")); #endif identifier = l2capinbuf[9]; l2cap_disconnection_response(identifier,control_dcid,control_scid); @@ -1008,7 +1008,7 @@ void PS3BT::ACL_event_task() else if (l2capinbuf[12] == interrupt_dcid[0] && l2capinbuf[13] == interrupt_dcid[1]) { #ifdef DEBUG - Notify(PSTR("\r\nDisconnected Request: Disconnected Interrupt")); + Notify(PSTR("\r\nDisconnect Request: Interrupt Channel")); #endif identifier = l2capinbuf[9]; l2cap_disconnection_response(identifier,interrupt_dcid,interrupt_scid); @@ -1018,13 +1018,13 @@ void PS3BT::ACL_event_task() { if (l2capinbuf[12] == control_scid[0] && l2capinbuf[13] == control_scid[1]) { - //Serial.print("\r\nDisconnected Response: Disconnected Control"); + //Serial.print("\r\nDisconnect Response: Control Channel"); identifier = l2capinbuf[9]; l2cap_event_flag |= L2CAP_EV_CONTROL_DISCONNECT_RESPONSE; } else if (l2capinbuf[12] == interrupt_scid[0] && l2capinbuf[13] == interrupt_scid[1]) { - //Serial.print("\r\nDisconnected Response: Disconnected Interrupt"); + //Serial.print("\r\nDisconnect Response: Interrupt Channel"); identifier = l2capinbuf[9]; l2cap_event_flag |= L2CAP_EV_INTERRUPT_DISCONNECT_RESPONSE; } diff --git a/PS3BT.h b/PS3BT.h index 2e0e4fad..db67f9da 100644 --- a/PS3BT.h +++ b/PS3BT.h @@ -413,7 +413,7 @@ private: uint32_t timerHID;// timer used see if there has to be a delay before a new HID command uint32_t timerBulbRumble;// used to continuously set PS3 Move controller Bulb and rumble values - uint8_t my_bdaddr[6]; //Change to your dongles Bluetooth address in PS3BT.cpp + uint8_t my_bdaddr[6]; // Change to your dongles Bluetooth address in the constructor uint8_t hcibuf[BULK_MAXPKTSIZE];//General purpose buffer for hci data uint8_t l2capinbuf[BULK_MAXPKTSIZE];//General purpose buffer for l2cap in data uint8_t l2capoutbuf[BULK_MAXPKTSIZE];//General purpose buffer for l2cap out data diff --git a/PS3USB.h b/PS3USB.h index 21550aea..6e34dba8 100644 --- a/PS3USB.h +++ b/PS3USB.h @@ -226,7 +226,7 @@ private: uint32_t ButtonState; uint32_t OldButtonState; - uint8_t my_bdaddr[6]; // Change to your dongles Bluetooth address in PS3BT.cpp + uint8_t my_bdaddr[6]; // Change to your dongles Bluetooth address in the constructor uint8_t readBuf[EP_MAXPKTSIZE]; // General purpose buffer for input data uint8_t writeBuf[EP_MAXPKTSIZE]; // General purpose buffer for output data From 9d6eb2d69bcfc49217296ba5702f7c68037cb7bf Mon Sep 17 00:00:00 2001 From: Kristian Lauszus Date: Mon, 28 May 2012 21:53:20 +0200 Subject: [PATCH 3/3] Created same syntax for Move controller --- PS3BT.cpp | 15 ++++++++--- PS3BT.h | 35 ++++++++++++++---------- PS3USB.h | 22 +++++++-------- examples/PS3/PS3BT/PS3BT.ino | 52 +++++++++++++++++++++--------------- keywords.txt | 13 +++------ 5 files changed, 76 insertions(+), 61 deletions(-) diff --git a/PS3BT.cpp b/PS3BT.cpp index e47db9fe..c369e3c9 100644 --- a/PS3BT.cpp +++ b/PS3BT.cpp @@ -441,10 +441,17 @@ bool PS3BT::getButton(Button b) { if (l2capinbuf == NULL) return false; - if ((l2capinbuf[(uint16_t)b >> 8] & ((uint8_t)b & 0xff)) > 0) - return true; - else - return false; + if(PS3MoveConnected) { + if((l2capinbuf[((uint16_t)b >> 8)-1] & ((uint8_t)b & 0xff))) // All the buttons locations are shifted one back on the Move controller + return true; + else + return false; + } else { + if((l2capinbuf[(uint16_t)b >> 8] & ((uint8_t)b & 0xff))) + return true; + else + return false; + } } uint8_t PS3BT::getAnalogButton(AnalogButton a) { diff --git a/PS3BT.h b/PS3BT.h index db67f9da..3d071dfc 100644 --- a/PS3BT.h +++ b/PS3BT.h @@ -179,24 +179,24 @@ enum LED }; enum Colors { - //Used to set the colors of the move controller - Red = 0xFF0000,//((255 << 16) | (0 << 8) | 0); - Green = 0xFF00,//((0 << 16) | (255 << 8) | 0); - Blue = 0xFF,//((0 << 16) | (0 << 8) | 255); + // Used to set the colors of the move controller + Red = 0xFF0000, // r = 255, g = 0, b = 0 + Green = 0xFF00, // r = 0, g = 255, b = 0 + Blue = 0xFF, // r = 0, g = 0, b = 255 - Yellow = 0xFFEB04,//((255 << 16) | (235 << 8) | 4); - Lightblue = 0xFFFF,//((0 << 16) | (255 << 8) | 255); - Purble = 0xFF00FF,//((255 << 16) | (0 << 8) | 255); + Yellow = 0xFFEB04, // r = 255, g = 235, b = 4 + Lightblue = 0xFFFF, // r = 0, g = 255, b = 255 + Purble = 0xFF00FF, // r = 255, g = 0, b = 255 - White = 0xFFFFFF,//((255 << 16) | (255 << 8) | 255); - Off = 0x00,//((0 << 16) | (0 << 8) | 0); + White = 0xFFFFFF, // r = 255, g = 255, b = 255 + Off = 0x00, // r = 0, g = 0, b = 0 }; enum Button { // byte location | bit location - //Sixaxis Dualshcock 3 & Navigation controller + // Sixaxis Dualshcock 3 & Navigation controller SELECT = (11 << 8) | 0x01, L3 = (11 << 8) | 0x02, R3 = (11 << 8) | 0x04, @@ -217,7 +217,13 @@ enum Button PS = (13 << 8) | 0x01, - //Playstation Move Controller + MOVE = (13/*12*/ << 8) | 0x08, // covers 12 bits - we only need to read the top 8 + T = (13/*12*/ << 8) | 0x10, // covers 12 bits - we only need to read the top 8 + + + // These are the true locations for the Move controller, but to make the same syntax for all controllers, it is handled by getButton() +/* + // Playstation Move Controller SELECT_MOVE = (10 << 8) | 0x01, START_MOVE = (10 << 8) | 0x08, @@ -227,8 +233,9 @@ enum Button SQUARE_MOVE = (11 << 8) | 0x80, PS_MOVE = (12 << 8) | 0x01, - MOVE_MOVE = (12 << 8) | 0x08,//covers 12 bits - we only need to read the top 8 - T_MOVE = (12 << 8) | 0x10,//covers 12 bits - we only need to read the top 8 + MOVE_MOVE = (12 << 8) | 0x08, // covers 12 bits - we only need to read the top 8 + T_MOVE = (12 << 8) | 0x10, // covers 12 bits - we only need to read the top 8 + */ }; enum AnalogButton { @@ -248,7 +255,7 @@ enum AnalogButton SQUARE_ANALOG = 34, //Playstation Move Controller - T_MOVE_ANALOG = 15,//Both at byte 14 (last reading) and byte 15 (current reading) + T_ANALOG = 15, // Both at byte 14 (last reading) and byte 15 (current reading) }; enum AnalogHat { diff --git a/PS3USB.h b/PS3USB.h index 6e34dba8..a89faae7 100644 --- a/PS3USB.h +++ b/PS3USB.h @@ -68,24 +68,24 @@ enum LED }; enum Colors { - //Used to set the colors of the move controller - Red = 0xFF0000,//((255 << 16) | (0 << 8) | 0); - Green = 0xFF00,//((0 << 16) | (255 << 8) | 0); - Blue = 0xFF,//((0 << 16) | (0 << 8) | 255); + // Used to set the colors of the move controller + Red = 0xFF0000, // r = 255, g = 0, b = 0 + Green = 0xFF00, // r = 0, g = 255, b = 0 + Blue = 0xFF, // r = 0, g = 0, b = 255 - Yellow = 0xFFEB04,//((255 << 16) | (235 << 8) | 4); - Lightblue = 0xFFFF,//((0 << 16) | (255 << 8) | 255); - Purble = 0xFF00FF,//((255 << 16) | (0 << 8) | 255); + Yellow = 0xFFEB04, // r = 255, g = 235, b = 4 + Lightblue = 0xFFFF, // r = 0, g = 255, b = 255 + Purble = 0xFF00FF, // r = 255, g = 0, b = 255 - White = 0xFFFFFF,//((255 << 16) | (255 << 8) | 255); - Off = 0x00,//((0 << 16) | (0 << 8) | 0); + White = 0xFFFFFF, // r = 255, g = 255, b = 255 + Off = 0x00, // r = 0, g = 0, b = 0 }; enum Button { // byte location | bit location - //Sixaxis Dualshcock 3 & Navigation controller + // Sixaxis Dualshcock 3 & Navigation controller SELECT = (2 << 8) | 0x01, L3 = (2 << 8) | 0x02, R3 = (2 << 8) | 0x04, @@ -108,7 +108,7 @@ enum Button }; enum AnalogButton { - //Sixaxis Dualshcock 3 & Navigation controller + // Sixaxis Dualshcock 3 & Navigation controller UP_ANALOG = 14, RIGHT_ANALOG = 15, DOWN_ANALOG = 16, diff --git a/examples/PS3/PS3BT/PS3BT.ino b/examples/PS3/PS3BT/PS3BT.ino index 7830aa01..74d911f9 100644 --- a/examples/PS3/PS3BT/PS3BT.ino +++ b/examples/PS3/PS3BT/PS3BT.ino @@ -79,21 +79,29 @@ void loop() Serial.print(F(" - Square")); if(PS3.getButton(UP)) { - Serial.print(F(" - Up")); - PS3.setAllOff(); - PS3.setLedOn(LED4); + Serial.print(F(" - Up")); + if(PS3.PS3Connected) { + PS3.setAllOff(); + PS3.setLedOn(LED4); + } } if(PS3.getButton(RIGHT)) { Serial.print(F(" - Right")); - PS3.setAllOff(); - PS3.setLedOn(LED1); + if(PS3.PS3Connected) { + PS3.setAllOff(); + PS3.setLedOn(LED1); + } } if(PS3.getButton(DOWN)) { Serial.print(F(" - Down")); - PS3.setAllOff(); - PS3.setLedOn(LED2); + if(PS3.PS3Connected) { + PS3.setAllOff(); + PS3.setLedOn(LED2); + } } if(PS3.getButton(LEFT)) { - Serial.print(F(" - Left")); - PS3.setAllOff(); - PS3.setLedOn(LED3); + Serial.print(F(" - Left")); + if(PS3.PS3Connected) { + PS3.setAllOff(); + PS3.setLedOn(LED3); + } } if(PS3.getButton(L1)) @@ -130,39 +138,39 @@ void loop() } else if(PS3.PS3MoveConnected) { - if(PS3.getAnalogButton(T_MOVE_ANALOG) > 0) { + if(PS3.getAnalogButton(T_ANALOG) > 0) { Serial.print(F("T: ")); - Serial.println(PS3.getAnalogButton(T_MOVE_ANALOG)); + Serial.println(PS3.getAnalogButton(T_ANALOG)); } if(PS3.buttonPressed) { Serial.print(F("PS3 Move Controller")); - if(PS3.getButton(PS_MOVE)) { + if(PS3.getButton(PS)) { Serial.print(F(" - PS")); PS3.disconnect(); } else { - if(PS3.getButton(SELECT_MOVE)) { + if(PS3.getButton(SELECT)) { Serial.print(F(" - Select")); printTemperature = !printTemperature; - while(PS3.getButton(SELECT_MOVE)) + while(PS3.getButton(SELECT)) Usb.Task(); - } if(PS3.getButton(START_MOVE)) { + } if(PS3.getButton(START)) { Serial.print(F(" - Start")); printAngle = !printAngle; - while(PS3.getButton(START_MOVE)) + while(PS3.getButton(START)) Usb.Task(); - } if(PS3.getButton(TRIANGLE_MOVE)) { + } if(PS3.getButton(TRIANGLE)) { Serial.print(F(" - Triangle")); PS3.moveSetBulb(Red); - } if(PS3.getButton(CIRCLE_MOVE)) { + } if(PS3.getButton(CIRCLE)) { Serial.print(F(" - Circle")); PS3.moveSetBulb(Green); - } if(PS3.getButton(SQUARE_MOVE)) { + } if(PS3.getButton(SQUARE)) { Serial.print(F(" - Square")); PS3.moveSetBulb(Blue); - } if(PS3.getButton(CROSS_MOVE)) { + } if(PS3.getButton(CROSS)) { Serial.print(F(" - Cross")); PS3.moveSetBulb(Yellow); - } if(PS3.getButton(MOVE_MOVE)) { + } if(PS3.getButton(MOVE)) { PS3.moveSetBulb(Off); Serial.print(F(" - Move")); Serial.print(F(" - ")); diff --git a/keywords.txt b/keywords.txt index 89597cf3..20afc467 100644 --- a/keywords.txt +++ b/keywords.txt @@ -82,15 +82,8 @@ CIRCLE LITERAL1 CROSS LITERAL1 SQUARE LITERAL1 PS LITERAL1 -SELECT_MOVE LITERAL1 -START_MOVE LITERAL1 -TRIANGLE_MOVE LITERAL1 -CIRCLE_MOVE LITERAL1 -CROSS_MOVE LITERAL1 -SQUARE_MOVE LITERAL1 -PS_MOVE LITERAL1 -MOVE_MOVE LITERAL1 -T_MOVE LITERAL1 +MOVE LITERAL1 +T LITERAL1 UP_ANALOG LITERAL1 RIGHT_ANALOG LITERAL1 @@ -104,7 +97,7 @@ TRIANGLE_ANALOG LITERAL1 CIRCLE_ANALOG LITERAL1 CROSS_ANALOG LITERAL1 SQUARE_ANALOG LITERAL1 -T_MOVE_ANALOG LITERAL1 +T_ANALOG LITERAL1 LeftHatX LITERAL1 LeftHatY LITERAL1