From ed04516c18aa30353d2bbfe1d88fd30f9bec7997 Mon Sep 17 00:00:00 2001 From: Oleg Mazurov Date: Wed, 3 Apr 2013 12:13:24 -0600 Subject: [PATCH] deleted pde versions --- examples/HID/USBHIDBootKbd/USBHIDBootKbd.pde | 96 ------- examples/board_qc/board_qc.pde | 266 ------------------- 2 files changed, 362 deletions(-) delete mode 100644 examples/HID/USBHIDBootKbd/USBHIDBootKbd.pde delete mode 100644 examples/board_qc/board_qc.pde diff --git a/examples/HID/USBHIDBootKbd/USBHIDBootKbd.pde b/examples/HID/USBHIDBootKbd/USBHIDBootKbd.pde deleted file mode 100644 index 24fe65be..00000000 --- a/examples/HID/USBHIDBootKbd/USBHIDBootKbd.pde +++ /dev/null @@ -1,96 +0,0 @@ -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -class KbdRptParser : public KeyboardReportParser -{ - void PrintKey(uint8_t mod, uint8_t key); - -protected: - virtual void OnKeyDown (uint8_t mod, uint8_t key); - virtual void OnKeyUp (uint8_t mod, uint8_t key); - virtual void OnKeyPressed(uint8_t key); -}; - -void KbdRptParser::PrintKey(uint8_t m, uint8_t key) -{ - MODIFIERKEYS mod; - *((uint8_t*)&mod) = m; - Serial.print((mod.bmLeftCtrl == 1) ? "C" : " "); - Serial.print((mod.bmLeftShift == 1) ? "S" : " "); - Serial.print((mod.bmLeftAlt == 1) ? "A" : " "); - Serial.print((mod.bmLeftGUI == 1) ? "G" : " "); - - Serial.print(" >"); - PrintHex(key); - Serial.print("< "); - - Serial.print((mod.bmRightCtrl == 1) ? "C" : " "); - Serial.print((mod.bmRightShift == 1) ? "S" : " "); - Serial.print((mod.bmRightAlt == 1) ? "A" : " "); - Serial.println((mod.bmRightGUI == 1) ? "G" : " "); -}; - -void KbdRptParser::OnKeyDown(uint8_t mod, uint8_t key) -{ - Serial.print("DN "); - PrintKey(mod, key); - uint8_t c = OemToAscii(mod, key); - - if (c) - OnKeyPressed(c); -} - -void KbdRptParser::OnKeyUp(uint8_t mod, uint8_t key) -{ - Serial.print("UP "); - PrintKey(mod, key); -} - -void KbdRptParser::OnKeyPressed(uint8_t key) -{ - Serial.print("ASCII: "); - Serial.println((char)key); -}; - -USB Usb; -//USBHub Hub(&Usb); -HIDBoot Keyboard(&Usb); - -uint32_t next_time; - -KbdRptParser Prs; - -void setup() -{ - Serial.begin( 115200 ); - Serial.println("Start"); - - if (Usb.Init() == -1) - Serial.println("OSC did not start."); - - delay( 200 ); - - next_time = millis() + 5000; - - Keyboard.SetReportParser(0, (HIDReportParser*)&Prs); -} - -void loop() -{ - Usb.Task(); -} - diff --git a/examples/board_qc/board_qc.pde b/examples/board_qc/board_qc.pde deleted file mode 100644 index 037762a6..00000000 --- a/examples/board_qc/board_qc.pde +++ /dev/null @@ -1,266 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* variables */ -uint8_t rcode; -uint8_t usbstate; -//uint8_t buf[sizeof(USB_DEVICE_DESCRIPTOR)]; -USB_DEVICE_DESCRIPTOR buf; - -/* objects */ -USB Usb; -//USBHub hub(&Usb); - - -void setup() -{ - Serial.begin( 115200 ); - Notify(PSTR("\r\nCircuits At Home 2011")); - Notify(PSTR("\r\nUSB Host Shield Quality Control Routine")); - /* check init */ -// if (Usb.Init() == -1) { -// Notify(PSTR("\r\nOSCOKIRQ failed to assert")); -// halt55(); -// } - /* SPI quick test - check revision register */ - Notify(PSTR("\r\nReading REVISION register... Die revision ")); - { - uint8_t tmpbyte = Usb.regRd( rREVISION ); - switch( tmpbyte ) { - case( 0x01): //rev.01 - Notify(PSTR("01")); - break; - case( 0x12): //rev.02 - Notify(PSTR("02")); - break; - case( 0x13): //rev.03 - Notify(PSTR("03")); - break; - default: - Notify(PSTR("invalid. Value returned: ")); - print_hex( tmpbyte, 8 ); - halt55(); - break; - }//switch( tmpbyte... - }//check revision register - /* SPI long test */ - { - Notify(PSTR("\r\nSPI long test. Transfers 1MB of data. Each dot is 64K")); - uint8_t sample_wr = 0; - uint8_t sample_rd = 0; - uint8_t gpinpol_copy = Usb.regRd( rGPINPOL ); - for( uint8_t i = 0; i < 16; i++ ) { - for( uint16_t j = 0; j < 65535; j++ ) { - Usb.regWr( rGPINPOL, sample_wr ); - sample_rd = Usb.regRd( rGPINPOL ); - if( sample_rd != sample_wr ) { - Notify(PSTR("\r\nTest failed. ")); - Notify(PSTR("Value written: ")); - print_hex( sample_wr, 8 ); - Notify(PSTR(" read: ")); - print_hex( sample_rd, 8 ); - halt55(); - }//if( sample_rd != sample_wr.. - sample_wr++; - }//for( uint16_t j... - Notify(PSTR(".")); - }//for( uint8_t i... - Usb.regWr( rGPINPOL, gpinpol_copy ); - Notify(PSTR(" SPI long test passed")); - }//SPI long test - /* GPIO test */ - /* in order to simplify board layout, GPIN pins on text fixture are connected to GPOUT */ - /* in reverse order, i.e, GPIN0 is connected to GPOUT7, GPIN1 to GPOUT6, etc. */ - { - uint8_t tmpbyte; - Notify(PSTR("\r\nGPIO test. Connect GPIN0 to GPOUT7, GPIN1 to GPOUT6, and so on")); - for( uint8_t sample_gpio = 0; sample_gpio < 255; sample_gpio++ ) { - Usb.gpioWr( sample_gpio ); - tmpbyte = Usb.gpioRd(); - /* bit reversing code copied vetbatim from http://graphics.stanford.edu/~seander/bithacks.html#BitReverseObvious */ - tmpbyte = ((tmpbyte * 0x0802LU & 0x22110LU) | (tmpbyte * 0x8020LU & 0x88440LU)) * 0x10101LU >> 16; - if( sample_gpio != tmpbyte ) { - Notify(PSTR("\r\nTest failed. Value written: ")); - print_hex( sample_gpio, 8 ); - Notify(PSTR(" Value read: ")); - print_hex( tmpbyte , 8 ); - Notify(PSTR(" ")); - press_any_key(); - break; - }//if( sample_gpio != tmpbyte... - }//for( uint8_t sample_gpio... - Notify(PSTR("\r\nGPIO test passed.")); - }//GPIO test - /* PLL test. Stops/starts MAX3421E oscillator several times */ - { - Notify(PSTR("\r\nPLL test. 100 chip resets will be performed")); - /* check current state of the oscillator */ - if(!( Usb.regRd( rUSBIRQ ) & bmOSCOKIRQ )) { //wrong state - should be on - Notify(PSTR("\r\nCurrent oscillator state unexpected.")); - press_any_key(); - } - /* Restart oscillator */ - Notify(PSTR("\r\nResetting oscillator")); - for( uint16_t i = 0; i < 101; i++ ) { - Notify(PSTR("\rReset number ")); - Serial.print( i, DEC ); - Usb.regWr( rUSBCTL, bmCHIPRES ); //reset - if( Usb.regRd( rUSBIRQ ) & bmOSCOKIRQ ) { //wrong state - should be off - Notify(PSTR("\r\nCurrent oscillator state unexpected.")); - halt55(); - } - Usb.regWr( rUSBCTL, 0x00 ); //release from reset - uint16_t j = 0; - for( j = 0; j < 65535; j++ ) { //tracking off to on time - if( Usb.regRd( rUSBIRQ ) & bmOSCOKIRQ ) { - Notify(PSTR(" Time to stabilize - ")); - Serial.print( j, DEC ); - Notify(PSTR(" cycles")); - break; - } - }//for( uint16_t j = 0; j < 65535; j++ - if( j == 0 ) { - Notify(PSTR("PLL failed to stabilize")); - press_any_key(); - } - }//for( uint8_t i = 0; i < 255; i++ - - }//PLL test - /* initializing USB stack */ - if (Usb.Init() == -1) { - Notify(PSTR("\r\nOSCOKIRQ failed to assert")); - halt55(); - } - Notify(PSTR("\r\nChecking USB device communication.\r\n")); -} - -void loop() -{ - delay( 200 ); - Usb.Task(); - usbstate = Usb.getUsbTaskState(); - //usbstate = Usb.getVbusState(); - //Notify(PSTR("\r\nUSB Task State: ")); - //print_hex( usbstate, 8 ); - /**/ - - switch( usbstate ) { - case( USB_DETACHED_SUBSTATE_WAIT_FOR_DEVICE ): - Notify(PSTR("\rWaiting for device ...")); - break; - case( USB_ATTACHED_SUBSTATE_RESET_DEVICE ): - Notify(PSTR("\r\nDevice connected. Resetting")); - break; - case( USB_ATTACHED_SUBSTATE_WAIT_SOF ): - Notify(PSTR("\rReset complete. Waiting for the first SOF...")); - break; - case( USB_ATTACHED_SUBSTATE_GET_DEVICE_DESCRIPTOR_SIZE ): - Notify(PSTR("\r\nSOF generation started. Enumerating device.")); - break; - case( USB_STATE_ADDRESSING ): - Notify(PSTR("\r\nSetting device address")); - break; - case( USB_STATE_RUNNING ): - Notify(PSTR("\r\nGetting device descriptor")); - rcode = Usb.getDevDescr( 1, 0, sizeof(USB_DEVICE_DESCRIPTOR), (uint8_t*)&buf ); - - if( rcode ) { - Notify(PSTR("\rError reading device descriptor. Error code ")); - print_hex( rcode, 8 ); - } - else { - /**/ - Notify(PSTR("\r\nDescriptor Length:\t")); - print_hex( buf.bLength, 8 ); - Notify(PSTR("\r\nDescriptor type:\t")); - print_hex( buf.bDescriptorType, 8 ); - Notify(PSTR("\r\nUSB version:\t\t")); - print_hex( buf.bcdUSB, 16 ); - Notify(PSTR("\r\nDevice class:\t\t")); - print_hex( buf.bDeviceClass, 8 ); - Notify(PSTR("\r\nDevice Subclass:\t")); - print_hex( buf.bDeviceSubClass, 8 ); - Notify(PSTR("\r\nDevice Protocol:\t")); - print_hex( buf.bDeviceProtocol, 8 ); - Notify(PSTR("\r\nMax.packet size:\t")); - print_hex( buf.bMaxPacketSize0, 8 ); - Notify(PSTR("\r\nVendor ID:\t\t")); - print_hex( buf.idVendor, 16 ); - Notify(PSTR("\r\nProduct ID:\t\t")); - print_hex( buf.idProduct, 16 ); - Notify(PSTR("\r\nRevision ID:\t\t")); - print_hex( buf.bcdDevice, 16 ); - Notify(PSTR("\r\nMfg.string index:\t")); - print_hex( buf.iManufacturer, 8 ); - Notify(PSTR("\r\nProd.string index:\t")); - print_hex( buf.iProduct, 8 ); - Notify(PSTR("\r\nSerial number index:\t")); - print_hex( buf.iSerialNumber, 8 ); - Notify(PSTR("\r\nNumber of conf.:\t")); - print_hex( buf.bNumConfigurations, 8 ); - /**/ - Notify(PSTR("\r\n\nAll tests passed. Press RESET to restart test")); - while(1); - } - break; - case( USB_STATE_ERROR ): - Notify(PSTR("\rUSB state machine reached error state")); - break; - - default: - //Notify(PSTR("\rUndefined State")); - break; - }//switch( usbstate... - -}//loop()... - -/* constantly transmits 0x55 via SPI to aid probing */ -void halt55() -{ - - Notify(PSTR("\r\nUnrecoverable error - test halted!!")); - Notify(PSTR("\r\n0x55 pattern is transmitted via SPI")); - Notify(PSTR("\r\nPress RESET to restart test")); - - while( 1 ) { - Usb.regWr( 0x55, 0x55 ); - } -} -/* prints hex numbers with leading zeroes */ -void print_hex(int v, int num_places) -{ - int mask=0, n, num_nibbles, digit; - - for (n=1; n<=num_places; n++) { - mask = (mask << 1) | 0x0001; - } - v = v & mask; // truncate v to specified number of places - - num_nibbles = num_places / 4; - if ((num_places % 4) != 0) { - ++num_nibbles; - } - do { - digit = ((v >> (num_nibbles-1) * 4)) & 0x0f; - Serial.print(digit, HEX); - } while(--num_nibbles); -} -/* prints "Press any key" and returns when key is pressed */ -void press_any_key() -{ - Notify(PSTR("\r\nPress any key to continue...")); - while( Serial.available() <= 0 ); //wait for input - Serial.read(); //empty input buffer - return; -}