ADK terminal demos added

Usb.h

@@ -18,6 +18,10 @@ e-mail   :  support@circuitsathome.com
 #ifndef _usb_h_
 #define _usb_h_
 
+
+//#define BOARD_BLACK_WIDDOW
+
+
 #define USB_METHODS_INLINE
 
 #include <inttypes.h>
@@ -37,8 +41,12 @@ e-mail   :  support@circuitsathome.com
 
 
 /* shield pins. First parameter - SS pin, second parameter - INT pin */
-//typedef MAX3421e<P6, P3>		MAX3421E;		// Black Widow
+
+#ifdef BOARD_BLACK_WIDDOW
+typedef MAX3421e<P6, P3>		MAX3421E;		// Black Widow
+#else
 typedef MAX3421e<P10, P9>		MAX3421E;		// Official Arduinos (UNO, Duemilanove, Mega, 2560
+#endif
 
 #define USBTRACE(s) (Serial.print((s)))
 #define USBTRACE2(s,r) (Serial.print((s)), Serial.println((r),HEX))

examples/adk/term_test/term_test.pde

@@ -0,0 +1,63 @@
+#include <avrpins.h>
+#include <max3421e.h>
+#include <usbhost.h>
+#include <usb_ch9.h>
+#include <Usb.h>
+#include <usbhub.h>
+#include <avr/pgmspace.h>
+#include <address.h>
+
+#include <adk.h>
+
+USB Usb;
+
+ADK adk(&Usb,"Circuits@Home, ltd.",
+            "USB Host Shield",
+            "Arduino Terminal for Android",
+            "1.0",
+            "http://www.circuitsathome.com",
+            "0000000000000001");
+
+void setup()
+{
+	Serial.begin(115200);
+	Serial.println("\r\nADK demo start");
+        
+        if (Usb.Init() == -1) {
+          Serial.println("OSCOKIRQ failed to assert");
+        while(1); //halt
+        }//if (Usb.Init() == -1...
+}
+
+void loop()
+{
+  uint8_t rcode;
+  uint8_t msg[64] = { 0x00 };
+  const char* recv = "Received: "; 
+   
+   Usb.Task();
+   
+   if( adk.isReady() == false ) {
+     return;
+   }
+   uint16_t len = 64;
+   
+   rcode = adk.RcvData(&len, msg);
+   if( rcode & ( rcode != hrNAK )) {
+     USBTRACE2("Data rcv. :", rcode );
+   } 
+   if(len > 0) {
+     USBTRACE("\r\nData Packet.");
+
+    for( uint8_t i = 0; i < len; i++ ) {
+      Serial.print(msg[i]);
+    }
+    /* sending back what was received */    
+    rcode = adk.SndData( strlen( recv ), (uint8_t *)recv );    
+    rcode = adk.SndData( strlen(( char * )msg ), msg );
+
+   }//if( len > 0 )...
+
+   delay( 1000 );       
+}
+

examples/adk/term_time/term_time.pde

@@ -0,0 +1,49 @@
+#include <avrpins.h>
+#include <max3421e.h>
+#include <usbhost.h>
+#include <usb_ch9.h>
+#include <Usb.h>
+#include <usbhub.h>
+#include <avr/pgmspace.h>
+#include <address.h>
+
+#include <adk.h>
+
+USB Usb;
+
+ADK adk(&Usb,"Circuits@Home, ltd.",
+            "USB Host Shield",
+            "Arduino Terminal for Android",
+            "1.0",
+            "http://www.circuitsathome.com",
+            "0000000000000001");
+
+void setup()
+{
+	Serial.begin(115200);
+	Serial.println("\r\nADK demo start");
+        
+        if (Usb.Init() == -1) {
+          Serial.println("OSCOKIRQ failed to assert");
+        while(1); //halt
+        }//if (Usb.Init() == -1...
+}
+
+void loop()
+{
+  uint8_t buf[ 12 ] = { 0 }; //buffer to convert unsigned long to ASCII
+  const char* sec_ela = " seconds elapsed\r";
+  uint8_t rcode;
+  
+   Usb.Task();
+   if( adk.isReady() == false ) {
+     return;
+   }
+   
+    ultoa( millis()/1000, (char *)buf, 10 );
+     
+    rcode = adk.SndData( strlen((char *)buf), buf );
+    rcode = adk.SndData( strlen( sec_ela), (uint8_t *)sec_ela );
+    
+      delay( 1000 );       
+}