/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. This software may be distributed and modified under the terms of the GNU General Public License version 2 (GPL2) as published by the Free Software Foundation and appearing in the file GPL2.TXT included in the packaging of this file. Please note that GPL2 Section 2[b] requires that all works based on this software must also be made publicly available under the terms of the GPL2 ("Copyleft"). Contact information ------------------- Circuits At Home, LTD Web : http://www.circuitsathome.com e-mail : support@circuitsathome.com */ #if !defined(__CDCACM_H__) #define __CDCACM_H__ #include "Usb.h" #include #include "printhex.h" #include "hexdump.h" #include "confdescparser.h" #define bmREQ_CDCOUT USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_INTERFACE #define bmREQ_CDCIN USB_SETUP_DEVICE_TO_HOST|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_INTERFACE // CDC Subclass Constants #define CDC_SUBCLASS_DLCM 0x01 // Direct Line Control Model #define CDC_SUBCLASS_ACM 0x02 // Abstract Control Model #define CDC_SUBCLASS_TCM 0x03 // Telephone Control Model #define CDC_SUBCLASS_MCCM 0x04 // Multi Channel Control Model #define CDC_SUBCLASS_CAPI 0x05 // CAPI Control Model #define CDC_SUBCLASS_ETHERNET 0x06 // Ethernet Network Control Model #define CDC_SUBCLASS_ATM 0x07 // ATM Network Control Model #define CDC_SUBCLASS_WIRELESS_HANDSET 0x08 // Wireless Handset Control Model #define CDC_SUBCLASS_DEVICE_MANAGEMENT 0x09 // Device Management #define CDC_SUBCLASS_MOBILE_DIRECT_LINE 0x0A // Mobile Direct Line Model #define CDC_SUBCLASS_OBEX 0x0B // OBEX #define CDC_SUBCLASS_ETHERNET_EMU 0x0C // Ethernet Emulation Model // Communication Interface Class Control Protocol Codes #define CDC_PROTOCOL_ITU_T_V_250 0x01 // AT Commands defined by ITU-T V.250 #define CDC_PROTOCOL_PCCA_101 0x02 // AT Commands defined by PCCA-101 #define CDC_PROTOCOL_PCCA_101_O 0x03 // AT Commands defined by PCCA-101 & Annex O #define CDC_PROTOCOL_GSM_7_07 0x04 // AT Commands defined by GSM 7.07 #define CDC_PROTOCOL_3GPP_27_07 0x05 // AT Commands defined by 3GPP 27.007 #define CDC_PROTOCOL_C_S0017_0 0x06 // AT Commands defined by TIA for CDMA #define CDC_PROTOCOL_USB_EEM 0x07 // Ethernet Emulation Model // CDC Commands defined by CDC 1.2 #define CDC_SEND_ENCAPSULATED_COMMAND 0x00 #define CDC_GET_ENCAPSULATED_RESPONSE 0x01 // CDC Commands defined by PSTN 1.2 #define CDC_SET_COMM_FEATURE 0x02 #define CDC_GET_COMM_FEATURE 0x03 #define CDC_CLEAR_COMM_FEATURE 0x04 #define CDC_SET_AUX_LINE_STATE 0x10 #define CDC_SET_HOOK_STATE 0x11 #define CDC_PULSE_SETUP 0x12 #define CDC_SEND_PULSE 0x13 #define CDC_SET_PULSE_TIME 0x14 #define CDC_RING_AUX_JACK 0x15 #define CDC_SET_LINE_CODING 0x20 #define CDC_GET_LINE_CODING 0x21 #define CDC_SET_CONTROL_LINE_STATE 0x22 #define CDC_SEND_BREAK 0x23 #define CDC_SET_RINGER_PARMS 0x30 #define CDC_GET_RINGER_PARMS 0x31 #define CDC_SET_OPERATION_PARMS 0x32 #define CDC_GET_OPERATION_PARMS 0x33 #define CDC_SET_LINE_PARMS 0x34 #define CDC_GET_LINE_PARMS 0x35 #define CDC_DIAL_DIGITS 0x36 //Class-Specific Notification Codes #define NETWORK_CONNECTION 0x00 #define RESPONSE_AVAILABLE 0x01 #define AUX_JACK_HOOK_STATE 0x08 #define RING_DETECT 0x09 #define SERIAL_STATE 0x20 #define CALL_STATE_CHANGE 0x28 #define LINE_STATE_CHANGE 0x29 #define CONNECTION_SPEED_CHANGE 0x2a // CDC Functional Descriptor Structures typedef struct { uint8_t bFunctionLength; uint8_t bDescriptorType; uint8_t bDescriptorSubtype; uint8_t bmCapabilities; uint8_t bDataInterface; } CALL_MGMNT_FUNC_DESCR; typedef struct { uint8_t bFunctionLength; uint8_t bDescriptorType; uint8_t bDescriptorSubtype; uint8_t bmCapabilities; } ACM_FUNC_DESCR, DLM_FUNC_DESCR, TEL_OPER_MODES_FUNC_DESCR, TEL_CALL_STATE_REP_CPBL_FUNC_DESCR; typedef struct { uint8_t bFunctionLength; uint8_t bDescriptorType; uint8_t bDescriptorSubtype; uint8_t bRingerVolSteps; uint8_t bNumRingerPatterns; } TEL_RINGER_FUNC_DESCR; typedef struct { uint32_t dwDTERate; // Data Terminal Rate in bits per second uint8_t bCharFormat; // 0 - 1 stop bit, 1 - 1.5 stop bits, 2 - 2 stop bits uint8_t bParityType; // 0 - None, 1 - Odd, 2 - Even, 3 - Mark, 4 - Space uint8_t bDataBits; // Data bits (5, 6, 7, 8 or 16) } LINE_CODING; typedef struct { uint8_t bmRequestType; // 0xa1 for class-specific notifications uint8_t bNotification; uint16_t wValue; uint16_t wIndex; uint16_t wLength; uint16_t bmState; //UART state bitmap for SERIAL_STATE, other notifications variable length } CLASS_NOTIFICATION; class ACM; class CDCAsyncOper { public: virtual uint8_t OnInit(ACM *pacm) = 0; //virtual void OnDataRcvd(ACM *pacm, uint8_t nbytes, uint8_t *dataptr) = 0; //virtual void OnDisconnected(ACM *pacm) = 0; }; #define ACM_MAX_ENDPOINTS 4 class ACM : public USBDeviceConfig, public UsbConfigXtracter { protected: static const uint8_t epDataInIndex; // DataIn endpoint index static const uint8_t epDataOutIndex; // DataOUT endpoint index static const uint8_t epInterruptInIndex; // InterruptIN endpoint index USB *pUsb; CDCAsyncOper *pAsync; uint8_t bAddress; uint8_t bConfNum; // configuration number uint8_t bControlIface; // Control interface value uint8_t bDataIface; // Data interface value uint8_t bNumEP; // total number of EP in the configuration uint32_t qNextPollTime; // next poll time bool bPollEnable; // poll enable flag bool ready; //device ready indicator EpInfo epInfo[ACM_MAX_ENDPOINTS]; void PrintEndpointDescriptor(const USB_ENDPOINT_DESCRIPTOR* ep_ptr); public: ACM(USB *pusb, CDCAsyncOper *pasync); uint8_t SetCommFeature(uint16_t fid, uint8_t nbytes, uint8_t *dataptr); uint8_t GetCommFeature(uint16_t fid, uint8_t nbytes, uint8_t *dataptr); uint8_t ClearCommFeature(uint16_t fid); uint8_t SetLineCoding(const LINE_CODING *dataptr); uint8_t GetLineCoding(LINE_CODING *dataptr); uint8_t SetControlLineState(uint8_t state); uint8_t SendBreak(uint16_t duration); uint8_t GetNotif( uint16_t *bytes_rcvd, uint8_t *dataptr ); // Methods for recieving and sending data uint8_t RcvData(uint16_t *nbytesptr, uint8_t *dataptr); uint8_t SndData(uint16_t nbytes, uint8_t *dataptr); // USBDeviceConfig implementation virtual uint8_t Init(uint8_t parent, uint8_t port, bool lowspeed); virtual uint8_t Release(); virtual uint8_t Poll(); virtual uint8_t GetAddress() { return bAddress; }; virtual bool isReady() { return ready; }; // UsbConfigXtracter implementation virtual void EndpointXtract(uint8_t conf, uint8_t iface, uint8_t alt, uint8_t proto, const USB_ENDPOINT_DESCRIPTOR *ep); }; #endif // __CDCACM_H__