#include <BTD.h>

Inheritance diagram for BTD:

Collaboration diagram for BTD:

Public Member Functions
	BTD (USB *p)

void	disconnect ()

int8_t	registerServiceClass (BluetoothService *pService)

void	pairWithWiimote ()

void	pairWithHID ()

uint8_t	readPollInterval ()

USBDeviceConfig implementation
virtual uint8_t	ConfigureDevice (uint8_t parent, uint8_t port, bool lowspeed)

virtual uint8_t	Init (uint8_t parent, uint8_t port, bool lowspeed)

virtual uint8_t	Release ()

virtual uint8_t	Poll ()

virtual uint8_t	GetAddress ()

virtual bool	isReady ()

virtual boolean	DEVCLASSOK (uint8_t klass)

virtual boolean	VIDPIDOK (uint16_t vid, uint16_t pid)

UsbConfigXtracter implementation
virtual void	EndpointXtract (uint8_t conf, uint8_t iface, uint8_t alt, uint8_t proto, const USB_ENDPOINT_DESCRIPTOR *ep)

HCI Commands
void	HCI_Command (uint8_t *data, uint16_t nbytes)

void	hci_reset ()

void	hci_read_bdaddr ()

void	hci_read_local_version_information ()

void	hci_set_local_name (const char *name)

void	hci_write_scan_enable ()

void	hci_write_scan_disable ()

void	hci_remote_name ()

void	hci_accept_connection ()

void	hci_disconnect (uint16_t handle)

void	hci_pin_code_request_reply ()

void	hci_pin_code_negative_request_reply ()

void	hci_link_key_request_negative_reply ()

void	hci_authentication_request ()

void	hci_inquiry ()

void	hci_inquiry_cancel ()

void	hci_connect ()

void	hci_connect (uint8_t *bdaddr)

void	hci_write_class_of_device ()

L2CAP Commands
void	L2CAP_Command (uint16_t handle, uint8_t *data, uint8_t nbytes, uint8_t channelLow=0x01, uint8_t channelHigh=0x00)

void	l2cap_connection_request (uint16_t handle, uint8_t rxid, uint8_t *scid, uint16_t psm)

void	l2cap_connection_response (uint16_t handle, uint8_t rxid, uint8_t dcid, uint8_t scid, uint8_t result)

void	l2cap_config_request (uint16_t handle, uint8_t rxid, uint8_t *dcid)

void	l2cap_config_response (uint16_t handle, uint8_t rxid, uint8_t *scid)

void	l2cap_disconnection_request (uint16_t handle, uint8_t rxid, uint8_t dcid, uint8_t scid)

void	l2cap_disconnection_response (uint16_t handle, uint8_t rxid, uint8_t dcid, uint8_t scid)

void	l2cap_information_response (uint16_t handle, uint8_t rxid, uint8_t infoTypeLow, uint8_t infoTypeHigh)

Public Member Functions inherited from USBDeviceConfig
virtual void	ResetHubPort (uint8_t port)

Public Attributes
bool	watingForConnection

bool	l2capConnectionClaimed

bool	sdpConnectionClaimed

bool	rfcommConnectionClaimed

const char *	btdName

const char *	btdPin

uint8_t	my_bdaddr [6]

uint16_t	hci_handle

uint8_t	disc_bdaddr [6]

char	remote_name [30]

uint8_t	hci_version

bool	connectToWii

bool	incomingWii

bool	pairWithWii

bool	motionPlusInside

bool	wiiUProController

bool	connectToHIDDevice

bool	incomingHIDDevice

bool	pairWithHIDDevice

Protected Member Functions
void	PrintEndpointDescriptor (const USB_ENDPOINT_DESCRIPTOR *ep_ptr)

Protected Attributes
USB *	pUsb

uint8_t	bAddress

EpInfo	epInfo [BTD_MAX_ENDPOINTS]

uint8_t	bConfNum

uint8_t	bNumEP

uint32_t	qNextPollTime

Static Protected Attributes
static const uint8_t	BTD_CONTROL_PIPE = 0

static const uint8_t	BTD_EVENT_PIPE = 1

static const uint8_t	BTD_DATAIN_PIPE = 2

static const uint8_t	BTD_DATAOUT_PIPE = 3

Detailed Description

The Bluetooth Dongle class will take care of all the USB communication and then pass the data to the BluetoothService classes.

Definition at line 230 of file BTD.h.

Constructor & Destructor Documentation

BTD::BTD ( USB * p )

Constructor for the BTD class.

Parameters

p	Pointer to USB class instance.

Definition at line 27 of file BTD.cpp.

Member Function Documentation

uint8_t BTD::ConfigureDevice	(	uint8_t	parent,
		uint8_t	port,
		bool	lowspeed
	)

virtual

Address assignment and basic initialization is done here.

Parameters

parent	Hub number.
port	Port number on the hub.
lowspeed	Speed of the device.

Returns: 0 on success.

Reimplemented from USBDeviceConfig.

Definition at line 48 of file BTD.cpp.

uint8_t BTD::Init	(	uint8_t	parent,
		uint8_t	port,
		bool	lowspeed
	)

virtual

Initialize the Bluetooth dongle.

Parameters

parent	Hub number.
port	Port number on the hub.
lowspeed	Speed of the device.

Returns: 0 on success.

Reimplemented from USBDeviceConfig.

Definition at line 122 of file BTD.cpp.

uint8_t BTD::Release ( )

virtual

Release the USB device.

Returns: 0 on success.

Reimplemented from USBDeviceConfig.

Definition at line 365 of file BTD.cpp.

uint8_t BTD::Poll ( )

virtual

Poll the USB Input endpoints and run the state machines.

Returns: 0 on success.

Reimplemented from USBDeviceConfig.

Definition at line 371 of file BTD.cpp.

virtual uint8_t BTD::GetAddress ( )

inlinevirtual

Get the device address.

Returns: The device address.

Reimplemented from USBDeviceConfig.

Definition at line 270 of file BTD.h.

virtual bool BTD::isReady ( )

inlinevirtual

Used to check if the dongle has been initialized.

Returns: True if it's ready.

Definition at line 278 of file BTD.h.

virtual boolean BTD::DEVCLASSOK ( uint8_t klass )

inlinevirtual

Used by the USB core to check what this driver support.

Parameters

klass The device's USB class.

Returns: Returns true if the device's USB class matches this driver.

Reimplemented from USBDeviceConfig.

Definition at line 287 of file BTD.h.

virtual boolean BTD::VIDPIDOK	(	uint16_t	vid,
		uint16_t	pid
	)

inlinevirtual

Used by the USB core to check what this driver support. Used to set the Bluetooth address into the PS3 controllers.

Parameters

vid	The device's VID.
pid	The device's PID.

Returns: Returns true if the device's VID and PID matches this driver.

Reimplemented from USBDeviceConfig.

Definition at line 298 of file BTD.h.

void BTD::EndpointXtract	(	uint8_t	conf,
		uint8_t	iface,
		uint8_t	alt,
		uint8_t	proto,
		const USB_ENDPOINT_DESCRIPTOR *	ep
	)

virtual

UsbConfigXtracter implementation, used to extract endpoint information.

Parameters

conf	Configuration value.
iface	Interface number.
alt	Alternate setting.
proto	Interface Protocol.
ep	Endpoint Descriptor.

Implements UsbConfigXtracter.

Definition at line 314 of file BTD.cpp.

void BTD::disconnect ( )

inline

Disconnects both the L2CAP Channel and the HCI Connection for all Bluetooth services.

Definition at line 322 of file BTD.h.

int8_t BTD::registerServiceClass ( BluetoothService * pService )

inline

Register Bluetooth dongle members/services.

Parameters

pService Pointer to BluetoothService class instance.

Returns: The service ID on success or -1 on fail.

Definition at line 333 of file BTD.h.

void BTD::HCI_Command	(	uint8_t *	data,
		uint16_t	nbytes
	)

Used to send a HCI Command.

Parameters

data	Data to send.
nbytes	Number of bytes to send.

Definition at line 919 of file BTD.cpp.

void BTD::hci_reset ( )

Reset the Bluetooth dongle.

Definition at line 924 of file BTD.cpp.

void BTD::hci_read_bdaddr ( )

Read the Bluetooth address of the dongle.

Definition at line 955 of file BTD.cpp.

void BTD::hci_read_local_version_information ( )

Read the HCI Version of the Bluetooth dongle.

Definition at line 964 of file BTD.cpp.

void BTD::hci_set_local_name ( const char * name )

Set the local name of the Bluetooth dongle.

Parameters

name	Desired name.

Definition at line 1008 of file BTD.cpp.

void BTD::hci_write_scan_enable ( )

Enable visibility to other Bluetooth devices.

Definition at line 933 of file BTD.cpp.

void BTD::hci_write_scan_disable ( )

Disable visibility to other Bluetooth devices.

Definition at line 946 of file BTD.cpp.

void BTD::hci_remote_name ( )

Read the remote devices name.

Definition at line 989 of file BTD.cpp.

void BTD::hci_accept_connection ( )

Accept the connection with the Bluetooth device.

Definition at line 973 of file BTD.cpp.

void BTD::hci_disconnect ( uint16_t handle )

Disconnect the HCI connection.

Parameters

handle The HCI Handle for the connection.

Definition at line 1142 of file BTD.cpp.

void BTD::hci_pin_code_request_reply ( )

Respond with the pin for the connection. The pin is automatically set for the Wii library, but can be customized for the SPP library.

Definition at line 1068 of file BTD.cpp.

void BTD::hci_pin_code_negative_request_reply ( )

Respons when no pin was set.

Definition at line 1104 of file BTD.cpp.

void BTD::hci_link_key_request_negative_reply ( )

Command is used to reply to a Link Key Request event from the BR/EDR Controller if the Host does not have a stored Link Key for the connection.

Definition at line 1118 of file BTD.cpp.

void BTD::hci_authentication_request ( )

Used to try to authenticate with the remote device.

Definition at line 1132 of file BTD.cpp.

void BTD::hci_inquiry ( )

Start a HCI inquiry.

Definition at line 1020 of file BTD.cpp.

void BTD::hci_inquiry_cancel ( )

Cancel a HCI inquiry.

Definition at line 1034 of file BTD.cpp.

void BTD::hci_connect ( )

Connect to last device communicated with.

Definition at line 1042 of file BTD.cpp.

void BTD::hci_connect ( uint8_t * bdaddr )

Connect to device.

Parameters

bdaddr Bluetooth address of the device.

Definition at line 1046 of file BTD.cpp.

void BTD::hci_write_class_of_device ( )

Used to a set the class of the device.

Definition at line 1154 of file BTD.cpp.

void BTD::L2CAP_Command	(	uint16_t	handle,
		uint8_t *	data,
		uint8_t	nbytes,
		uint8_t	channelLow = `0x01`,
		uint8_t	channelHigh = `0x00`
	)

Used to send L2CAP Commands.

Parameters

handle	HCI Handle.
data	Data to send.
nbytes	Number of bytes to send.
channelLow,channelHigh	Low and high byte of channel to send to. If argument is omitted then the Standard L2CAP header: Channel ID (0x01) for ACL-U will be used.

Definition at line 1190 of file BTD.cpp.

void BTD::l2cap_connection_request	(	uint16_t	handle,
		uint8_t	rxid,
		uint8_t *	scid,
		uint16_t	psm
	)

L2CAP Connection Request.

Parameters

handle	HCI handle.
rxid	Identifier.
scid	Source Channel Identifier.
psm	Protocol/Service Multiplexer - see: https://www.bluetooth.org/Technical/AssignedNumbers/logical_link.htm.

Definition at line 1218 of file BTD.cpp.

void BTD::l2cap_connection_response	(	uint16_t	handle,
		uint8_t	rxid,
		uint8_t *	dcid,
		uint8_t *	scid,
		uint8_t	result
	)

L2CAP Connection Response.

Parameters

handle	HCI handle.
rxid	Identifier.
dcid	Destination Channel Identifier.
scid	Source Channel Identifier.
result	Result - First send PENDING and then SUCCESSFUL.

Definition at line 1231 of file BTD.cpp.

void BTD::l2cap_config_request	(	uint16_t	handle,
		uint8_t	rxid,
		uint8_t *	dcid
	)

L2CAP Config Request.

Parameters

handle	HCI Handle.
rxid	Identifier.
dcid	Destination Channel Identifier.

Definition at line 1248 of file BTD.cpp.

void BTD::l2cap_config_response	(	uint16_t	handle,
		uint8_t	rxid,
		uint8_t *	scid
	)

L2CAP Config Response.

Parameters

handle	HCI Handle.
rxid	Identifier.
scid	Source Channel Identifier.

Definition at line 1265 of file BTD.cpp.

void BTD::l2cap_disconnection_request	(	uint16_t	handle,
		uint8_t	rxid,
		uint8_t *	dcid,
		uint8_t *	scid
	)

L2CAP Disconnection Request.

Parameters

handle	HCI Handle.
rxid	Identifier.
dcid	Device Channel Identifier.
scid	Source Channel Identifier.

Definition at line 1284 of file BTD.cpp.

void BTD::l2cap_disconnection_response	(	uint16_t	handle,
		uint8_t	rxid,
		uint8_t *	dcid,
		uint8_t *	scid
	)

L2CAP Disconnection Response.

Parameters

handle	HCI Handle.
rxid	Identifier.
dcid	Device Channel Identifier.
scid	Source Channel Identifier.

Definition at line 1297 of file BTD.cpp.

void BTD::l2cap_information_response	(	uint16_t	handle,
		uint8_t	rxid,
		uint8_t	infoTypeLow,
		uint8_t	infoTypeHigh
	)

L2CAP Information Response.

Parameters

handle	HCI Handle.
rxid	Identifier.
infoTypeLow,infoTypeHigh	Infotype.

Definition at line 1310 of file BTD.cpp.

void BTD::pairWithWiimote ( )

inline

Call this function to pair with a Wiimote

Definition at line 500 of file BTD.h.

void BTD::pairWithHID ( )

inline

Call this function to pair with a Wiimote

Definition at line 516 of file BTD.h.

uint8_t BTD::readPollInterval ( )

inline

Read the poll interval taken from the endpoint descriptors.

Returns: The poll interval in ms.

Definition at line 531 of file BTD.h.

void BTD::PrintEndpointDescriptor ( const USB_ENDPOINT_DESCRIPTOR * ep_ptr )

protected

Used to print the USB Endpoint Descriptor.

Parameters

ep_ptr Pointer to USB Endpoint Descriptor.

Definition at line 346 of file BTD.cpp.

Member Data Documentation

bool BTD::watingForConnection

Use this to see if it is waiting for a incoming connection.

Definition at line 471 of file BTD.h.

bool BTD::l2capConnectionClaimed

This is used by the service to know when to store the device information.

Definition at line 473 of file BTD.h.

bool BTD::sdpConnectionClaimed

This is used by the SPP library to claim the current SDP incoming request.

Definition at line 475 of file BTD.h.

bool BTD::rfcommConnectionClaimed

This is used by the SPP library to claim the current RFCOMM incoming request.

Definition at line 477 of file BTD.h.

const char* BTD::btdName

The name you wish to make the dongle show up as. It is set automatically by the SPP library.

Definition at line 480 of file BTD.h.

const char* BTD::btdPin

The pin you wish to make the dongle use for authentication. It is set automatically by the SPP and BTHID library.

Definition at line 482 of file BTD.h.

uint8_t BTD::my_bdaddr[6]

The bluetooth dongles Bluetooth address.

Definition at line 485 of file BTD.h.

uint16_t BTD::hci_handle

HCI handle for the last connection.

Definition at line 487 of file BTD.h.

uint8_t BTD::disc_bdaddr[6]

Last incoming devices Bluetooth address.

Definition at line 489 of file BTD.h.

char BTD::remote_name[30]

First 30 chars of last remote name.

Definition at line 491 of file BTD.h.

uint8_t BTD::hci_version

The supported HCI Version read from the Bluetooth dongle. Used by the PS3BT library to check the HCI Version of the Bluetooth dongle, it should be at least 3 to work properly with the library.

Definition at line 497 of file BTD.h.

bool BTD::connectToWii

Used to only send the ACL data to the Wiimote.

Definition at line 503 of file BTD.h.

bool BTD::incomingWii

True if a Wiimote is connecting.

Definition at line 507 of file BTD.h.

bool BTD::pairWithWii

True when it should pair with a Wiimote.

Definition at line 509 of file BTD.h.

bool BTD::motionPlusInside

True if it's the new Wiimote with the Motion Plus Inside or a Wii U Pro Controller.

Definition at line 511 of file BTD.h.

bool BTD::wiiUProController

True if it's a Wii U Pro Controller.

Definition at line 513 of file BTD.h.

bool BTD::connectToHIDDevice

Used to only send the ACL data to the Wiimote.

Definition at line 519 of file BTD.h.

bool BTD::incomingHIDDevice

True if a Wiimote is connecting.

Definition at line 523 of file BTD.h.

bool BTD::pairWithHIDDevice

True when it should pair with a device like a mouse or keyboard.

Definition at line 525 of file BTD.h.

USB* BTD::pUsb

protected

Pointer to USB class instance.

Definition at line 533 of file BTD.h.

uint8_t BTD::bAddress

protected

Device address.

Definition at line 539 of file BTD.h.

EpInfo BTD::epInfo[BTD_MAX_ENDPOINTS]

protected

Endpoint info structure.

Definition at line 541 of file BTD.h.

uint8_t BTD::bConfNum

protected

Configuration number.

Definition at line 544 of file BTD.h.

uint8_t BTD::bNumEP

protected

Total number of endpoints in the configuration.

Definition at line 546 of file BTD.h.

uint32_t BTD::qNextPollTime

protected

Next poll time based on poll interval taken from the USB descriptor.

Definition at line 548 of file BTD.h.

const uint8_t BTD::BTD_CONTROL_PIPE = 0

staticprotected

Bluetooth dongle control endpoint.

Definition at line 551 of file BTD.h.

const uint8_t BTD::BTD_EVENT_PIPE = 1

staticprotected

HCI event endpoint index.

Definition at line 553 of file BTD.h.

const uint8_t BTD::BTD_DATAIN_PIPE = 2

staticprotected

ACL In endpoint index.

Definition at line 555 of file BTD.h.

const uint8_t BTD::BTD_DATAOUT_PIPE = 3

staticprotected

ACL Out endpoint index.

Definition at line 557 of file BTD.h.

The documentation for this class was generated from the following files:

Public Member Functions

Public Attributes

Protected Member Functions

Protected Attributes

Static Protected Attributes

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation