/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. This software may be distributed and modified under the terms of the GNU General Public License version 2 (GPL2) as published by the Free Software Foundation and appearing in the file GPL2.TXT included in the packaging of this file. Please note that GPL2 Section 2[b] requires that all works based on this software must also be made publicly available under the terms of the GPL2 ("Copyleft"). Contact information ------------------- Circuits At Home, LTD Web : http://www.circuitsathome.com e-mail : support@circuitsathome.com */ /* USB functions */ #include "avrpins.h" #include "max3421e.h" #include "usbhost.h" #include "Usb.h" #if defined(ARDUINO) && ARDUINO >=100 #include "Arduino.h" #else #include #endif static uint8_t usb_error = 0; static uint8_t usb_task_state; /* constructor */ USB::USB() : bmHubPre(0) { usb_task_state = USB_DETACHED_SUBSTATE_INITIALIZE; //set up state machine init(); } /* Initialize data structures */ void USB::init() { //devConfigIndex = 0; bmHubPre = 0; } uint8_t USB::getUsbTaskState(void) { return ( usb_task_state); } void USB::setUsbTaskState(uint8_t state) { usb_task_state = state; } EpInfo* USB::getEpInfoEntry(uint8_t addr, uint8_t ep) { UsbDevice *p = addrPool.GetUsbDevicePtr(addr); if (!p || !p->epinfo) return NULL; EpInfo *pep = p->epinfo; for (uint8_t i = 0; i < p->epcount; i++) { if ((pep)->epAddr == ep) return pep; pep++; } return NULL; } /* set device table entry */ /* each device is different and has different number of endpoints. This function plugs endpoint record structure, defined in application, to devtable */ uint8_t USB::setEpInfoEntry(uint8_t addr, uint8_t epcount, EpInfo* eprecord_ptr) { if (!eprecord_ptr) return USB_ERROR_INVALID_ARGUMENT; UsbDevice *p = addrPool.GetUsbDevicePtr(addr); if (!p) return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL; p->address = addr; p->epinfo = eprecord_ptr; p->epcount = epcount; return 0; } uint8_t USB::SetAddress(uint8_t addr, uint8_t ep, EpInfo **ppep, uint16_t &nak_limit) { UsbDevice *p = addrPool.GetUsbDevicePtr(addr); if (!p) return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL; if (!p->epinfo) return USB_ERROR_EPINFO_IS_NULL; *ppep = getEpInfoEntry(addr, ep); if (!*ppep) return USB_ERROR_EP_NOT_FOUND_IN_TBL; nak_limit = (0x0001UL << (((*ppep)->bmNakPower > USB_NAK_MAX_POWER) ? USB_NAK_MAX_POWER : (*ppep)->bmNakPower)); nak_limit--; /* USBTRACE2("\r\nAddress: ", addr); USBTRACE2(" EP: ", ep); USBTRACE2(" NAK Power: ",(*ppep)->bmNakPower); USBTRACE2(" NAK Limit: ", nak_limit); USBTRACE("\r\n"); */ regWr(rPERADDR, addr); //set peripheral address uint8_t mode = regRd(rMODE); //Serial.print("\r\nMode: "); //Serial.println( mode, HEX); //Serial.print("\r\nLS: "); //Serial.println(p->lowspeed, HEX); // Set bmLOWSPEED and bmHUBPRE in case of low-speed device, reset them otherwise regWr(rMODE, (p->lowspeed) ? mode | bmLOWSPEED | bmHubPre : mode & ~(bmHUBPRE | bmLOWSPEED)); return 0; } /* Control transfer. Sets address, endpoint, fills control packet with necessary data, dispatches control packet, and initiates bulk IN transfer, */ /* depending on request. Actual requests are defined as inlines */ /* return codes: */ /* 00 = success */ /* 01-0f = non-zero HRSLT */ uint8_t USB::ctrlReq(uint8_t addr, uint8_t ep, uint8_t bmReqType, uint8_t bRequest, uint8_t wValLo, uint8_t wValHi, uint16_t wInd, uint16_t total, uint16_t nbytes, uint8_t* dataptr, USBReadParser *p) { bool direction = false; //request direction, IN or OUT uint8_t rcode; SETUP_PKT setup_pkt; EpInfo *pep = NULL; uint16_t nak_limit = 0; rcode = SetAddress(addr, ep, &pep, nak_limit); if (rcode) return rcode; direction = ((bmReqType & 0x80) > 0); /* fill in setup packet */ setup_pkt.ReqType_u.bmRequestType = bmReqType; setup_pkt.bRequest = bRequest; setup_pkt.wVal_u.wValueLo = wValLo; setup_pkt.wVal_u.wValueHi = wValHi; setup_pkt.wIndex = wInd; setup_pkt.wLength = total; bytesWr(rSUDFIFO, 8, (uint8_t*) & setup_pkt); //transfer to setup packet FIFO rcode = dispatchPkt(tokSETUP, ep, nak_limit); //dispatch packet if (rcode) //return HRSLT if not zero return ( rcode); if (dataptr != NULL) //data stage, if present { if (direction) //IN transfer { uint16_t left = total; pep->bmRcvToggle = 1; //bmRCVTOG1; while (left) { // Bytes read into buffer uint16_t read = nbytes; //uint16_t read = (leftbmRcvToggle = (regRd(rHRSL) & bmSNDTOGRD) ? 0 : 1; continue; } if (rcode) return rcode; // Invoke callback function if inTransfer completed successfully and callback function pointer is specified if (!rcode && p) ((USBReadParser*)p)->Parse(read, dataptr, total - left); left -= read; if (read < nbytes) break; } } else //OUT transfer { pep->bmSndToggle = 1; //bmSNDTOG1; rcode = OutTransfer(pep, nak_limit, nbytes, dataptr); } if (rcode) //return error return ( rcode); } // Status stage return dispatchPkt((direction) ? tokOUTHS : tokINHS, ep, nak_limit); //GET if direction } /* IN transfer to arbitrary endpoint. Assumes PERADDR is set. Handles multiple packets if necessary. Transfers 'nbytes' bytes. */ /* Keep sending INs and writes data to memory area pointed by 'data' */ /* rcode 0 if no errors. rcode 01-0f is relayed from dispatchPkt(). Rcode f0 means RCVDAVIRQ error, fe USB xfer timeout */ uint8_t USB::inTransfer(uint8_t addr, uint8_t ep, uint16_t *nbytesptr, uint8_t* data) { EpInfo *pep = NULL; uint16_t nak_limit = 0; uint8_t rcode = SetAddress(addr, ep, &pep, nak_limit); if (rcode) { //printf("SetAddress Failed"); return rcode; } return InTransfer(pep, nak_limit, nbytesptr, data); } uint8_t USB::InTransfer(EpInfo *pep, uint16_t nak_limit, uint16_t *nbytesptr, uint8_t* data) { uint8_t rcode = 0; uint8_t pktsize; uint16_t nbytes = *nbytesptr; //printf("Requesting %i bytes ", nbytes); uint8_t maxpktsize = pep->maxPktSize; *nbytesptr = 0; regWr(rHCTL, (pep->bmRcvToggle) ? bmRCVTOG1 : bmRCVTOG0); //set toggle value while (1) // use a 'return' to exit this loop { rcode = dispatchPkt(tokIN, pep->epAddr, nak_limit); //IN packet to EP-'endpoint'. Function takes care of NAKS. if (rcode == hrTOGERR) { // yes, we flip it wrong here so that next time it is actually correct! pep->bmRcvToggle = (regRd(rHRSL) & bmSNDTOGRD) ? 0 : 1; regWr(rHCTL, (pep->bmRcvToggle) ? bmRCVTOG1 : bmRCVTOG0); //set toggle value continue; } if (rcode) { //printf(">>>>>>>> Problem! dispatchPkt %2.2x\r\n", rcode); break; //should be 0, indicating ACK. Else return error code. } /* check for RCVDAVIRQ and generate error if not present */ /* the only case when absence of RCVDAVIRQ makes sense is when toggle error occurred. Need to add handling for that */ if ((regRd(rHIRQ) & bmRCVDAVIRQ) == 0) { //printf(">>>>>>>> Problem! NO RCVDAVIRQ!\r\n"); rcode = 0xf0; //receive error break; } pktsize = regRd(rRCVBC); //number of received bytes //printf("Got %i bytes \r\n", pktsize); // This would be OK, but... //assert(pktsize <= nbytes); if (pktsize > nbytes) { // This can happen. Use of assert on Arduino locks up the Arduino. // So I will trim the value, and hope for the best. //printf(">>>>>>>> Problem! Wanted %i bytes but got %i.\r\n", nbytes, pktsize); pktsize = nbytes; } int16_t mem_left = (int16_t)nbytes - *((int16_t*)nbytesptr); if (mem_left < 0) mem_left = 0; data = bytesRd(rRCVFIFO, ((pktsize > mem_left) ? mem_left : pktsize), data); regWr(rHIRQ, bmRCVDAVIRQ); // Clear the IRQ & free the buffer *nbytesptr += pktsize; // add this packet's byte count to total transfer length /* The transfer is complete under two conditions: */ /* 1. The device sent a short packet (L.T. maxPacketSize) */ /* 2. 'nbytes' have been transferred. */ if ((pktsize < maxpktsize) || (*nbytesptr >= nbytes)) // have we transferred 'nbytes' bytes? { // Save toggle value pep->bmRcvToggle = ((regRd(rHRSL) & bmRCVTOGRD)) ? 1 : 0; //printf("\r\n"); rcode = 0; break; } // if } //while( 1 ) return ( rcode); } /* OUT transfer to arbitrary endpoint. Handles multiple packets if necessary. Transfers 'nbytes' bytes. */ /* Handles NAK bug per Maxim Application Note 4000 for single buffer transfer */ /* rcode 0 if no errors. rcode 01-0f is relayed from HRSL */ uint8_t USB::outTransfer(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* data) { EpInfo *pep = NULL; uint16_t nak_limit = 0; uint8_t rcode = SetAddress(addr, ep, &pep, nak_limit); if (rcode) return rcode; return OutTransfer(pep, nak_limit, nbytes, data); } uint8_t USB::OutTransfer(EpInfo *pep, uint16_t nak_limit, uint16_t nbytes, uint8_t *data) { uint8_t rcode = hrSUCCESS, retry_count; uint8_t *data_p = data; //local copy of the data pointer uint16_t bytes_tosend, nak_count; uint16_t bytes_left = nbytes; uint8_t maxpktsize = pep->maxPktSize; if (maxpktsize < 1 || maxpktsize > 64) return USB_ERROR_INVALID_MAX_PKT_SIZE; unsigned long timeout = millis() + USB_XFER_TIMEOUT; regWr(rHCTL, (pep->bmSndToggle) ? bmSNDTOG1 : bmSNDTOG0); //set toggle value while (bytes_left) { retry_count = 0; nak_count = 0; bytes_tosend = (bytes_left >= maxpktsize) ? maxpktsize : bytes_left; bytesWr(rSNDFIFO, bytes_tosend, data_p); //filling output FIFO regWr(rSNDBC, bytes_tosend); //set number of bytes regWr(rHXFR, (tokOUT | pep->epAddr)); //dispatch packet while (!(regRd(rHIRQ) & bmHXFRDNIRQ)); //wait for the completion IRQ regWr(rHIRQ, bmHXFRDNIRQ); //clear IRQ rcode = (regRd(rHRSL) & 0x0f); while (rcode && (timeout > millis())) { switch (rcode) { case hrNAK: nak_count++; if (nak_limit && (nak_count == nak_limit)) goto breakout; //return ( rcode); break; case hrTIMEOUT: retry_count++; if (retry_count == USB_RETRY_LIMIT) goto breakout; //return ( rcode); break; case hrTOGERR: // yes, we flip it wrong here so that next time it is actually correct! pep->bmSndToggle = (regRd(rHRSL) & bmSNDTOGRD) ? 0 : 1; regWr(rHCTL, (pep->bmSndToggle) ? bmSNDTOG1 : bmSNDTOG0); //set toggle value break; default: goto breakout; }//switch( rcode /* process NAK according to Host out NAK bug */ regWr(rSNDBC, 0); regWr(rSNDFIFO, *data_p); regWr(rSNDBC, bytes_tosend); regWr(rHXFR, (tokOUT | pep->epAddr)); //dispatch packet while (!(regRd(rHIRQ) & bmHXFRDNIRQ)); //wait for the completion IRQ regWr(rHIRQ, bmHXFRDNIRQ); //clear IRQ rcode = (regRd(rHRSL) & 0x0f); }//while( rcode && .... bytes_left -= bytes_tosend; data_p += bytes_tosend; }//while( bytes_left... breakout: pep->bmSndToggle = (regRd(rHRSL) & bmSNDTOGRD) ? 1 : 0; //bmSNDTOG1 : bmSNDTOG0; //update toggle return ( rcode); //should be 0 in all cases } /* dispatch USB packet. Assumes peripheral address is set and relevant buffer is loaded/empty */ /* If NAK, tries to re-send up to nak_limit times */ /* If nak_limit == 0, do not count NAKs, exit after timeout */ /* If bus timeout, re-sends up to USB_RETRY_LIMIT times */ /* return codes 0x00-0x0f are HRSLT( 0x00 being success ), 0xff means timeout */ uint8_t USB::dispatchPkt(uint8_t token, uint8_t ep, uint16_t nak_limit) { unsigned long timeout = millis() + USB_XFER_TIMEOUT; uint8_t tmpdata; uint8_t rcode = hrSUCCESS; uint8_t retry_count = 0; uint16_t nak_count = 0; while (timeout > millis()) { regWr(rHXFR, (token | ep)); //launch the transfer rcode = USB_ERROR_TRANSFER_TIMEOUT; while (timeout > millis()) //wait for transfer completion { tmpdata = regRd(rHIRQ); if (tmpdata & bmHXFRDNIRQ) { regWr(rHIRQ, bmHXFRDNIRQ); //clear the interrupt rcode = 0x00; break; }//if( tmpdata & bmHXFRDNIRQ }//while ( millis() < timeout //if (rcode != 0x00) //exit if timeout // return ( rcode); rcode = (regRd(rHRSL) & 0x0f); //analyze transfer result switch (rcode) { case hrNAK: nak_count++; if (nak_limit && (nak_count == nak_limit)) return (rcode); break; case hrTIMEOUT: retry_count++; if (retry_count == USB_RETRY_LIMIT) return (rcode); break; default: return (rcode); }//switch( rcode }//while( timeout > millis() return ( rcode); } /* USB main task. Performs enumeration/cleanup */ void USB::Task(void) //USB state machine { uint8_t rcode; uint8_t tmpdata; static unsigned long delay = 0; //USB_DEVICE_DESCRIPTOR buf; bool lowspeed = false; MAX3421E::Task(); tmpdata = getVbusState(); /* modify USB task state if Vbus changed */ switch (tmpdata) { case SE1: //illegal state usb_task_state = USB_DETACHED_SUBSTATE_ILLEGAL; lowspeed = false; break; case SE0: //disconnected if ((usb_task_state & USB_STATE_MASK) != USB_STATE_DETACHED) usb_task_state = USB_DETACHED_SUBSTATE_INITIALIZE; lowspeed = false; break; case LSHOST: // if ((usb_task_state & USB_STATE_MASK) == USB_STATE_DETACHED) { lowspeed = true; // } case FSHOST: //attached if ((usb_task_state & USB_STATE_MASK) == USB_STATE_DETACHED) { delay = millis() + USB_SETTLE_DELAY; usb_task_state = USB_ATTACHED_SUBSTATE_SETTLE; } break; }// switch( tmpdata for (uint8_t i = 0; i < USB_NUMDEVICES; i++) if (devConfig[i]) rcode = devConfig[i]->Poll(); switch (usb_task_state) { case USB_DETACHED_SUBSTATE_INITIALIZE: init(); for (uint8_t i = 0; i < USB_NUMDEVICES; i++) if (devConfig[i]) rcode = devConfig[i]->Release(); usb_task_state = USB_DETACHED_SUBSTATE_WAIT_FOR_DEVICE; break; case USB_DETACHED_SUBSTATE_WAIT_FOR_DEVICE: //just sit here break; case USB_DETACHED_SUBSTATE_ILLEGAL: //just sit here break; case USB_ATTACHED_SUBSTATE_SETTLE: //settle time for just attached device if (delay < millis()) usb_task_state = USB_ATTACHED_SUBSTATE_RESET_DEVICE; break; case USB_ATTACHED_SUBSTATE_RESET_DEVICE: regWr(rHCTL, bmBUSRST); //issue bus reset usb_task_state = USB_ATTACHED_SUBSTATE_WAIT_RESET_COMPLETE; break; case USB_ATTACHED_SUBSTATE_WAIT_RESET_COMPLETE: if ((regRd(rHCTL) & bmBUSRST) == 0) { tmpdata = regRd(rMODE) | bmSOFKAENAB; //start SOF generation regWr(rMODE, tmpdata); usb_task_state = USB_ATTACHED_SUBSTATE_WAIT_SOF; //delay = millis() + 20; //20ms wait after reset per USB spec } break; case USB_ATTACHED_SUBSTATE_WAIT_SOF: //todo: change check order if (regRd(rHIRQ) & bmFRAMEIRQ) { //when first SOF received _and_ 20ms has passed we can continue /* if (delay < millis()) //20ms passed usb_task_state = USB_STATE_CONFIGURING; */ usb_task_state = USB_ATTACHED_SUBSTATE_WAIT_RESET; delay = millis() + 20; } break; case USB_ATTACHED_SUBSTATE_WAIT_RESET: if (delay < millis()) usb_task_state = USB_STATE_CONFIGURING; break; case USB_STATE_CONFIGURING: //Serial.print("\r\nConf.LS: "); //Serial.println(lowspeed, HEX); rcode = Configuring(0, 0, lowspeed); if (rcode) { if (rcode != USB_DEV_CONFIG_ERROR_DEVICE_INIT_INCOMPLETE) { usb_error = rcode; usb_task_state = USB_STATE_ERROR; } } else usb_task_state = USB_STATE_RUNNING; break; case USB_STATE_RUNNING: break; case USB_STATE_ERROR: //MAX3421E::Init(); break; } // switch( usb_task_state ) } uint8_t USB::DefaultAddressing(uint8_t parent, uint8_t port, bool lowspeed) { //uint8_t buf[12]; uint8_t rcode; UsbDevice *p0 = NULL, *p = NULL; // Get pointer to pseudo device with address 0 assigned p0 = addrPool.GetUsbDevicePtr(0); if (!p0) return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL; if (!p0->epinfo) return USB_ERROR_EPINFO_IS_NULL; p0->lowspeed = (lowspeed) ? true : false; // Allocate new address according to device class uint8_t bAddress = addrPool.AllocAddress(parent, false, port); if (!bAddress) return USB_ERROR_OUT_OF_ADDRESS_SPACE_IN_POOL; p = addrPool.GetUsbDevicePtr(bAddress); if (!p) return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL; p->lowspeed = lowspeed; // Assign new address to the device rcode = setAddr(0, 0, bAddress); if (rcode) { addrPool.FreeAddress(bAddress); bAddress = 0; return rcode; } return 0; }; uint8_t USB::AttemptConfig(uint8_t driver, uint8_t parent, uint8_t port, bool lowspeed) { uint8_t rcode = 0; //printf("AttemptConfig: parent = %i, port = %i\r\n", parent, port); rcode = devConfig[driver]->ConfigureDevice(parent, port, lowspeed); if (rcode == USB_ERROR_CONFIG_REQUIRES_ADDITIONAL_RESET) { if (parent == 0) { // Send a bus reset on the root interface. regWr(rHCTL, bmBUSRST); //issue bus reset delay(102); // delay 102ms, compensate for clock inaccuracy. } else { // reset parent port devConfig[parent]->ResetHubPort(port); } } rcode = devConfig[driver]->Init(parent, port, lowspeed); return rcode; } /* * This is broken. We need to enumerate differently. * It causes major problems with several devices if detected in an unexpected order. * * * Oleg - I wouldn't do anything before the newly connected device is considered sane. * i.e.(delays are not indicated for brevity): * 1. reset * 2. GetDevDescr(); * 3a. If ACK, continue with allocating address, addressing, etc. * 3b. Else reset again, count resets, stop at some number (5?). * 4. When max.number of resets is reached, toggle power/fail * If desired, this could be modified by performing two resets with GetDevDescr() in the middle - however, from my experience, if a device answers to GDD() * it doesn't need to be reset again * New steps proposal: * 1: get address pool instance. exit on fail * 2: pUsb->getDevDescr(0, 0, constBufSize, (uint8_t*)buf). exit on fail. * 3: bus reset, 100ms delay * 4: set address * 5: pUsb->setEpInfoEntry(bAddress, 1, epInfo), exit on fail * 6: while (configurations) { * for(each configuration) { * for (each driver) { * 6a: Ask device if it likes configuration. Returns 0 on OK. * If successful, the driver configured device. * The driver now owns the endpoints, and takes over managing them. * The following will need codes: * Everything went well, instance consumed, exit with success. * Instance already in use, ignore it, try next driver. * Not a supported device, ignore it, try next driver. * Not a supported configuration for this device, ignore it, try next driver. * Could not configure device, fatal, exit with fail. * } * } * } * 7: for(each driver) { * 7a: Ask device if it knows this VID/PID. Acts exactly like 6a, but using VID/PID * 8: if we get here, no driver likes the device plugged in, so exit failure. * */ uint8_t USB::Configuring(uint8_t parent, uint8_t port, bool lowspeed) { //uint8_t bAddress = 0; //printf("Configuring: parent = %i, port = %i\r\n", parent, port); uint8_t devConfigIndex; uint8_t rcode = 0; uint8_t buf[sizeof (USB_DEVICE_DESCRIPTOR)]; UsbDevice *p = NULL; EpInfo *oldep_ptr = NULL; EpInfo epInfo; epInfo.epAddr = 0; epInfo.maxPktSize = 8; epInfo.epAttribs = 0; epInfo.bmNakPower = USB_NAK_MAX_POWER; delay(2000); AddressPool &addrPool = GetAddressPool(); // Get pointer to pseudo device with address 0 assigned p = addrPool.GetUsbDevicePtr(0); if (!p) { //printf("Configuring error: USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL\r\n"); return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL; } // Save old pointer to EP_RECORD of address 0 oldep_ptr = p->epinfo; // Temporary assign new pointer to epInfo to p->epinfo in order to // avoid toggle inconsistence p->epinfo = &epInfo; p->lowspeed = lowspeed; // Get device descriptor rcode = getDevDescr(0, 0, sizeof (USB_DEVICE_DESCRIPTOR), (uint8_t*)buf); // Restore p->epinfo p->epinfo = oldep_ptr; if (rcode) { //printf("Configuring error: Can't get USB_DEVICE_DESCRIPTOR\r\n"); return rcode; } // to-do? // Allocate new address according to device class //bAddress = addrPool.AllocAddress(parent, false, port); //if (!bAddress) // return USB_ERROR_OUT_OF_ADDRESS_SPACE_IN_POOL; uint16_t vid = (uint16_t)((USB_DEVICE_DESCRIPTOR*)buf)->idVendor; uint16_t pid = (uint16_t)((USB_DEVICE_DESCRIPTOR*)buf)->idProduct; uint8_t klass = ((USB_DEVICE_DESCRIPTOR*)buf)->bDeviceClass; // Attempt to configure if VID/PID or device class matches with a driver for (devConfigIndex = 0; devConfigIndex < USB_NUMDEVICES; devConfigIndex++) { if (!devConfig[devConfigIndex]) continue; // no driver if (devConfig[devConfigIndex]->GetAddress()) continue; // consumed if (devConfig[devConfigIndex]->VIDPIDOK(vid, pid) || devConfig[devConfigIndex]->DEVCLASSOK(klass)) { rcode = AttemptConfig(devConfigIndex, parent, port, lowspeed); if (rcode != USB_DEV_CONFIG_ERROR_DEVICE_NOT_SUPPORTED) break; } } if (devConfigIndex < USB_NUMDEVICES) { return rcode; } // blindly attempt to configure for (devConfigIndex = 0; devConfigIndex < USB_NUMDEVICES; devConfigIndex++) { if (!devConfig[devConfigIndex]) continue; if (devConfig[devConfigIndex]->GetAddress()) continue; // consumed if (devConfig[devConfigIndex]->VIDPIDOK(vid, pid) || devConfig[devConfigIndex]->DEVCLASSOK(klass)) continue; // If this is true it means it must have returned USB_DEV_CONFIG_ERROR_DEVICE_NOT_SUPPORTED above rcode = AttemptConfig(devConfigIndex, parent, port, lowspeed); //printf("ERROR ENUMERATING %2.2x\r\n", rcode); if (!(rcode == USB_DEV_CONFIG_ERROR_DEVICE_NOT_SUPPORTED || rcode == USB_ERROR_CLASS_INSTANCE_ALREADY_IN_USE)) { // in case of an error dev_index should be reset to 0 // in order to start from the very beginning the // next time the program gets here //if (rcode != USB_DEV_CONFIG_ERROR_DEVICE_INIT_INCOMPLETE) // devConfigIndex = 0; return rcode; } } // if we get here that means that the device class is not supported by any of registered classes rcode = DefaultAddressing(parent, port, lowspeed); return rcode; } uint8_t USB::ReleaseDevice(uint8_t addr) { if (!addr) return 0; for (uint8_t i = 0; i < USB_NUMDEVICES; i++) { if(!devConfig[i]) continue; if (devConfig[i]->GetAddress() == addr) return devConfig[i]->Release(); } return 0; } #if 1 //!defined(USB_METHODS_INLINE) //get device descriptor uint8_t USB::getDevDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* dataptr) { return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, 0x00, USB_DESCRIPTOR_DEVICE, 0x0000, nbytes, nbytes, dataptr, NULL)); } //get configuration descriptor uint8_t USB::getConfDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t conf, uint8_t* dataptr) { return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, conf, USB_DESCRIPTOR_CONFIGURATION, 0x0000, nbytes, nbytes, dataptr, NULL)); } uint8_t USB::getConfDescr(uint8_t addr, uint8_t ep, uint8_t conf, USBReadParser *p) { const uint8_t bufSize = 64; uint8_t buf[bufSize]; uint8_t ret = getConfDescr(addr, ep, 8, conf, buf); if (ret) return ret; uint16_t total = ((USB_CONFIGURATION_DESCRIPTOR*)buf)->wTotalLength; //USBTRACE2("\r\ntotal conf.size:", total); return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, conf, USB_DESCRIPTOR_CONFIGURATION, 0x0000, total, bufSize, buf, p)); } //get string descriptor uint8_t USB::getStrDescr(uint8_t addr, uint8_t ep, uint16_t ns, uint8_t index, uint16_t langid, uint8_t* dataptr) { return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, index, USB_DESCRIPTOR_STRING, langid, ns, ns, dataptr, NULL)); } //set address uint8_t USB::setAddr(uint8_t oldaddr, uint8_t ep, uint8_t newaddr) { return ( ctrlReq(oldaddr, ep, bmREQ_SET, USB_REQUEST_SET_ADDRESS, newaddr, 0x00, 0x0000, 0x0000, 0x0000, NULL, NULL)); } //set configuration uint8_t USB::setConf(uint8_t addr, uint8_t ep, uint8_t conf_value) { return ( ctrlReq(addr, ep, bmREQ_SET, USB_REQUEST_SET_CONFIGURATION, conf_value, 0x00, 0x0000, 0x0000, 0x0000, NULL, NULL)); } #endif // defined(USB_METHODS_INLINE)