/* Copyright (C) 2012 Kristian Lauszus, TKJ Electronics. All rights reserved. This software may be distributed and modified under the terms of the GNU General Public License version 2 (GPL2) as published by the Free Software Foundation and appearing in the file GPL2.TXT included in the packaging of this file. Please note that GPL2 Section 2[b] requires that all works based on this software must also be made publicly available under the terms of the GPL2 ("Copyleft"). Contact information ------------------- Kristian Lauszus, TKJ Electronics Web : http://www.tkjelectronics.com e-mail : kristianl@tkjelectronics.com */ #ifndef _xboxusb_h_ #define _xboxusb_h_ #if defined(ARDUINO) && ARDUINO >= 100 #include "Arduino.h" #else #include "WProgram.h" #endif #include "Usb.h" #include "xboxEnums.h" /* Data Xbox 360 taken from descriptors */ #define EP_MAXPKTSIZE 32 // max size for data via USB /* Endpoint types */ #define EP_INTERRUPT 0x03 /* Names we give to the 3 Xbox360 pipes */ #define XBOX_CONTROL_PIPE 0 #define XBOX_INPUT_PIPE 1 #define XBOX_OUTPUT_PIPE 2 // PID and VID of the different devices #define XBOX_VID 0x045E // Microsoft Corporation #define XBOX_WIRELESS_PID 0x028F // Wireless controller only support charging #define XBOX_WIRELESS_RECEIVER_PID 0x0719 // Microsoft Wireless Gaming Receiver #define XBOX_WIRELESS_RECEIVER_THIRD_PARTY_PID 0x0291 // Third party Wireless Gaming Receiver #define MADCATZ_VID 0x1BAD // For unofficial Mad Catz controllers #define JOYTECH_VID 0x162E // For unofficial Joytech controllers #define XBOX_REPORT_BUFFER_SIZE 14 // Size of the input report buffer // Used in control endpoint header for HID Commands #define bmREQ_HID_OUT USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_INTERFACE #define HID_REQUEST_SET_REPORT 0x09 #define XBOX_MAX_ENDPOINTS 3 /** This class implements support for a Xbox wired controller via USB. */ class XBOXUSB : public USBDeviceConfig { public: /** * Constructor for the XBOXUSB class. * @param pUsb Pointer to USB class instance. */ XBOXUSB(USB *pUsb); /** @name USBDeviceConfig implementation */ /** * Initialize the Xbox Controller. * @param parent Hub number. * @param port Port number on the hub. * @param lowspeed Speed of the device. * @return 0 on success. */ virtual uint8_t Init(uint8_t parent, uint8_t port, bool lowspeed); /** * Release the USB device. * @return 0 on success. */ virtual uint8_t Release(); /** * Poll the USB Input endpoins and run the state machines. * @return 0 on success. */ virtual uint8_t Poll(); /** * Get the device address. * @return The device address. */ virtual uint8_t GetAddress() { return bAddress; }; /** * Used to check if the controller has been initialized. * @return True if it's ready. */ virtual bool isReady() { return bPollEnable; }; /**@}*/ /** @name Xbox Controller functions */ /** * getButtonPress(Button b) will return true as long as the button is held down. * * While getButtonClick(Button b) will only return it once. * * So you instance if you need to increase a variable once you would use getButtonClick(Button b), * but if you need to drive a robot forward you would use getButtonPress(Button b). * @param b ::Button to read. * @return getButtonClick(Button b) will return a bool, but getButtonPress(Button b) * will return a byte if reading ::L2 or ::R2. */ uint8_t getButtonPress(Button b); bool getButtonClick(Button b); /**@}*/ /** @name Xbox Controller functions */ /** * Return the analog value from the joysticks on the controller. * @param a Either ::LeftHatX, ::LeftHatY, ::RightHatX or ::RightHatY. * @return Returns a signed 16-bit integer. */ int16_t getAnalogHat(AnalogHat a); /** Turn rumble off and all the LEDs on the controller. */ void setAllOff() { setRumbleOn(0, 0); setLedRaw(0); }; /** Turn rumble off the controller. */ void setRumbleOff() { setRumbleOn(0, 0); }; /** * Turn rumble on. * @param lValue Left motor (big weight) inside the controller. * @param rValue Right motor (small weight) inside the controller. */ void setRumbleOn(uint8_t lValue, uint8_t rValue); /** * Set LED value. Without using the ::LED or ::LEDMode enum. * @param value See: * setLedOff(), setLedOn(LED l), * setLedBlink(LED l), and setLedMode(LEDMode lm). */ void setLedRaw(uint8_t value); /** Turn all LEDs off the controller. */ void setLedOff() { setLedRaw(0); }; /** * Turn on a LED by using the ::LED enum. * @param l ::LED1, ::LED2, ::LED3 and ::LED4 is supported by the Xbox controller. */ void setLedOn(LED l); /** * Turn on a LED by using the ::LED enum. * @param l ::ALL, ::LED1, ::LED2, ::LED3 and ::LED4 is supported by the Xbox controller. */ void setLedBlink(LED l); /** * Used to set special LED modes supported by the Xbox controller. * @param controller The controller to write to. * @param lm See ::LEDMode. */ void setLedMode(LEDMode lm); /**@}*/ /** True if a Xbox 360 controller is connected. */ bool Xbox360Connected; protected: /** Pointer to USB class instance. */ USB *pUsb; /** Device address. */ uint8_t bAddress; /** Endpoint info structure. */ EpInfo epInfo[XBOX_MAX_ENDPOINTS]; private: bool bPollEnable; /* Variables to store the buttons */ uint32_t ButtonState; uint32_t OldButtonState; uint16_t ButtonClickState; int16_t hatValue[4]; uint16_t controllerStatus; bool L2Clicked; // These buttons are analog, so we use we use these bools to check if they where clicked or not bool R2Clicked; uint8_t readBuf[EP_MAXPKTSIZE]; // General purpose buffer for input data uint8_t writeBuf[EP_MAXPKTSIZE]; // General purpose buffer for output data void readReport(); // read incoming data void printReport(); // print incoming date - Uncomment for debugging /* Private commands */ void XboxCommand(uint8_t* data, uint16_t nbytes); }; #endif