/* Copyright (C) 2012 Kristian Lauszus, TKJ Electronics. All rights reserved.
 
 This software may be distributed and modified under the terms of the GNU
 General Public License version 2 (GPL2) as published by the Free Software
 Foundation and appearing in the file GPL2.TXT included in the packaging of
 this file. Please note that GPL2 Section 2[b] requires that all works based
 on this software must also be made publicly available under the terms of
 the GPL2 ("Copyleft").
 
 Contact information
 -------------------
 
 Kristian Lauszus, TKJ Electronics
 Web      :  http://www.tkjelectronics.com
 e-mail   :  kristianl@tkjelectronics.com
 */

#ifndef _ps3enums_h
#define _ps3enums_h

enum LED {
    LED1 = 0x01,
    LED2 = 0x02,
    LED3 = 0x04,
    LED4 = 0x08,
    
    LED5 = 0x09,
    LED6 = 0x0A,
    LED7 = 0x0C,
    LED8 = 0x0D,
    LED9 = 0x0E,
    LED10 = 0x0F,
};
enum Colors {
    // Used to set the colors of the move controller
    Red = 0xFF0000, // r = 255, g = 0, b = 0
    Green = 0xFF00, // r = 0, g = 255, b = 0
    Blue = 0xFF, // r = 0, g = 0, b = 255
    
    Yellow = 0xFFEB04, // r = 255, g = 235, b = 4
    Lightblue = 0xFFFF, // r = 0, g = 255, b = 255
    Purble = 0xFF00FF, // r = 255, g = 0, b = 255
    
    White = 0xFFFFFF, // r = 255, g = 255, b = 255
    Off = 0x00, // r = 0, g = 0, b = 0
};
enum Button {
    SELECT = 0x01,
    L3 = 0x02,
    R3 = 0x04,
    START = 0x08,
    UP = 0x10,
    RIGHT = 0x20,
    DOWN = 0x40,
    LEFT = 0x80,
    
    L2 = 0x0100,
    R2 = 0x0200,
    L1 = 0x0400,
    R1 = 0x0800,
    TRIANGLE = 0x1000,
    CIRCLE = 0x2000,
    CROSS = 0x4000,
    SQUARE = 0x8000,
    
    PS = 0x010000,
    
    MOVE = 0x080000, // covers 12 bits - we only need to read the top 8
    T = 0x100000, // covers 12 bits - we only need to read the top 8
};
enum AnalogButton {
    // Note that the location is shiftet 9 when it's connected via USB    
    // Sixaxis Dualshcock 3 & Navigation controller
    UP_ANALOG = 23,
    RIGHT_ANALOG = 24,
    DOWN_ANALOG = 25,
    LEFT_ANALOG = 26,
    
    L2_ANALOG = 27,
    R2_ANALOG = 28,
    L1_ANALOG = 29,
    R1_ANALOG = 30,
    TRIANGLE_ANALOG = 31,
    CIRCLE_ANALOG = 32,
    CROSS_ANALOG = 33,
    SQUARE_ANALOG = 34,
    
    //Playstation Move Controller
    T_ANALOG = 15, // Both at byte 14 (last reading) and byte 15 (current reading)
};
enum AnalogHat {
    // Note that the location is shiftet 9 when it's connected via USB    
    LeftHatX = 15,
    LeftHatY = 16,
    RightHatX = 17,
    RightHatY = 18,
};
enum Sensor {
    // Note that the location is shiftet 9 when it's connected via USB
    // Sensors inside the Sixaxis Dualshock 3 controller
    aX = 50,
    aY = 52,
    aZ = 54,
    gZ = 56,
    
    // Sensors inside the Move Motion controller
    aXmove = 28,
    aZmove = 30,
    aYmove = 32,
    
    gXmove = 40,
    gZmove = 42,
    gYmove = 44,
    
    tempMove = 46,
    
    mXmove = 47,
    mZmove = 49,
    mYmove = 50,
};
enum Angle {
    // Used to get the angle calculated using atan2
    Pitch = 0x01,
    Roll = 0x02,
};
enum Status {
    // Note that the location is shiftet 9 when it's connected via USB
    // Byte location | bit location
    Plugged = (38 << 8) | 0x02,
    Unplugged = (38 << 8) | 0x03,
    
    Charging = (39 << 8) | 0xEE,
    NotCharging = (39 << 8) | 0xF1,
    Shutdown = (39 << 8) | 0x01,
    Dying = (39 << 8) | 0x02,
    Low = (39 << 8) | 0x03,
    High = (39 << 8) | 0x04,
    Full = (39 << 8) | 0x05,
    
    MoveCharging = (21 << 8) | 0xEE,
    MoveNotCharging = (21 << 8) | 0xF1,
    MoveShutdown = (21 << 8) | 0x01,
    MoveDying = (21 << 8) | 0x02,
    MoveLow = (21 << 8) | 0x03,
    MoveHigh = (21 << 8) | 0x04,
    MoveFull = (21 << 8) | 0x05,
    
    CableRumble = (40 << 8) | 0x10,//Opperating by USB and rumble is turned on
    Cable = (40 << 8) | 0x12,//Opperating by USB and rumble is turned off
    BluetoothRumble = (40 << 8) | 0x14,//Opperating by bluetooth and rumble is turned on
    Bluetooth = (40 << 8) | 0x16,//Opperating by bluetooth and rumble is turned off
};
enum Rumble {    
    RumbleHigh = 0x10,
    RumbleLow = 0x20,
};

#endif