/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.

This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").

Contact information
-------------------

Circuits At Home, LTD
Web      :  http://www.circuitsathome.com
e-mail   :  support@circuitsathome.com
 */
#include "usbhub.h"

bool USBHub::bResetInitiated = false;

USBHub::USBHub(USB *p) :
pUsb(p),
bAddress(0),
bNbrPorts(0),
bInitState(0),
qNextPollTime(0),
bPollEnable(false) {
        epInfo[0].epAddr = 0;
        epInfo[0].maxPktSize = 8;
        epInfo[0].epAttribs = 0;
        epInfo[0].bmNakPower = USB_NAK_MAX_POWER;

        epInfo[1].epAddr = 1;
        epInfo[1].maxPktSize = 8; //kludge
        epInfo[1].epAttribs = 0;
        epInfo[1].bmNakPower = USB_NAK_NOWAIT;

        if (pUsb)
                pUsb->RegisterDeviceClass(this);
}

uint8_t USBHub::Init(uint8_t parent, uint8_t port, bool lowspeed) {
        uint8_t buf[32];
        uint8_t rcode;
        UsbDevice *p = NULL;
        EpInfo *oldep_ptr = NULL;
        uint8_t len = 0;
        uint16_t cd_len = 0;

        //USBTRACE("\r\nHub Init Start");

        AddressPool &addrPool = pUsb->GetAddressPool();

        switch (bInitState) {
                case 0:
                        if (bAddress)
                                return USB_ERROR_CLASS_INSTANCE_ALREADY_IN_USE;

                        // Get pointer to pseudo device with address 0 assigned
                        p = addrPool.GetUsbDevicePtr(0);

                        if (!p)
                                return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL;

                        if (!p->epinfo)
                                return USB_ERROR_EPINFO_IS_NULL;

                        // Save old pointer to EP_RECORD of address 0
                        oldep_ptr = p->epinfo;

                        // Temporary assign new pointer to epInfo to p->epinfo in order to avoid toggle inconsistence
                        p->epinfo = epInfo;

                        p->lowspeed = lowspeed;

                        // Get device descriptor
                        rcode = pUsb->getDevDescr(0, 0, 8, (uint8_t*)buf);

                        p->lowspeed = false;

                        if (!rcode)
                                len = (buf[0] > 32) ? 32 : buf[0];

                        if (rcode) {
                                // Restore p->epinfo
                                p->epinfo = oldep_ptr;
                                return rcode;
                        }

                        // Extract device class from device descriptor
                        // If device class is not a hub return
                        if (((USB_DEVICE_DESCRIPTOR*)buf)->bDeviceClass != 0x09)
                                return USB_DEV_CONFIG_ERROR_DEVICE_NOT_SUPPORTED;

                        // Allocate new address according to device class
                        bAddress = addrPool.AllocAddress(parent, (((USB_DEVICE_DESCRIPTOR*)buf)->bDeviceClass == 0x09) ? true : false, port);

                        if (!bAddress)
                                return USB_ERROR_OUT_OF_ADDRESS_SPACE_IN_POOL;

                        // Extract Max Packet Size from the device descriptor
                        epInfo[0].maxPktSize = ((USB_DEVICE_DESCRIPTOR*)buf)->bMaxPacketSize0;

                        // Assign new address to the device
                        rcode = pUsb->setAddr(0, 0, bAddress);

                        if (rcode) {
                                // Restore p->epinfo
                                p->epinfo = oldep_ptr;
                                addrPool.FreeAddress(bAddress);
                                bAddress = 0;
                                return rcode;
                        }

                        //USBTRACE2("\r\nHub address: ", bAddress );

                        // Restore p->epinfo
                        p->epinfo = oldep_ptr;

                        if (len)
                                rcode = pUsb->getDevDescr(bAddress, 0, len, (uint8_t*)buf);

                        if (rcode)
                                goto FailGetDevDescr;

                        // Assign epInfo to epinfo pointer
                        rcode = pUsb->setEpInfoEntry(bAddress, 2, epInfo);

                        if (rcode)
                                goto FailSetDevTblEntry;

                        bInitState = 1;

                case 1:
                        // Get hub descriptor
                        rcode = GetHubDescriptor(0, 8, buf);

                        if (rcode)
                                goto FailGetHubDescr;

                        // Save number of ports for future use
                        bNbrPorts = ((HubDescriptor*)buf)->bNbrPorts;

                        bInitState = 2;

                case 2:
                        // Read configuration Descriptor in Order To Obtain Proper Configuration Value
                        rcode = pUsb->getConfDescr(bAddress, 0, 8, 0, buf);

                        if (!rcode) {
                                cd_len = ((USB_CONFIGURATION_DESCRIPTOR*)buf)->wTotalLength;
                                rcode = pUsb->getConfDescr(bAddress, 0, cd_len, 0, buf);
                        }
                        if (rcode)
                                goto FailGetConfDescr;

                        // The following code is of no practical use in real life applications.
                        // It only intended for the usb protocol sniffer to properly parse hub-class requests.
                {
                        uint8_t buf2[24];

                        rcode = pUsb->getConfDescr(bAddress, 0, buf[0], 0, buf2);

                        if (rcode)
                                goto FailGetConfDescr;
                }

                        // Set Configuration Value
                        rcode = pUsb->setConf(bAddress, 0, buf[5]);

                        if (rcode)
                                goto FailSetConfDescr;

                        bInitState = 3;

                case 3:
                        // Power on all ports
                        for (uint8_t j = 1; j <= bNbrPorts; j++)
                                SetPortFeature(HUB_FEATURE_PORT_POWER, j, 0); //HubPortPowerOn(j);

                        pUsb->SetHubPreMask();
                        bPollEnable = true;
                        bInitState = 0;
        }
        bInitState = 0;
        return 0;

// Oleg, No debugging?? -- xxxajk
FailGetDevDescr:
        goto Fail;

FailSetDevTblEntry:
        goto Fail;

FailGetHubDescr:
        goto Fail;

FailGetConfDescr:
        goto Fail;

FailSetConfDescr:
        goto Fail;

Fail:
        return rcode;
}

uint8_t USBHub::Release() {
        pUsb->GetAddressPool().FreeAddress(bAddress);

        if (bAddress == 0x41)
                pUsb->SetHubPreMask();

        bAddress = 0;
        bNbrPorts = 0;
        qNextPollTime = 0;
        bPollEnable = false;
        return 0;
}

uint8_t USBHub::Poll() {
        uint8_t rcode = 0;

        if (!bPollEnable)
                return 0;

        if (qNextPollTime <= millis()) {
                rcode = CheckHubStatus();
                qNextPollTime = millis() + 100;
        }
        return rcode;
}

uint8_t USBHub::CheckHubStatus() {
        uint8_t rcode;
        uint8_t buf[8];
        uint16_t read = 1;

        rcode = pUsb->inTransfer(bAddress, 1, &read, buf);

        if (rcode)
                return rcode;

        if (buf[0] & 0x01) // Hub Status Change
        {
                //pUsb->PrintHubStatus(addr);
                //rcode = GetHubStatus(1, 0, 1, 4, buf);
                //if (rcode)
                //{
                //	USB_HOST_SERIAL.print("GetHubStatus Error");
                //	USB_HOST_SERIAL.println(rcode, HEX);
                //	return rcode;
                //}
        }
        for (uint8_t port = 1, mask = 0x02; port < 8; mask <<= 1, port++) {
                if (buf[0] & mask) {
                        HubEvent evt;
                        evt.bmEvent = 0;

                        rcode = GetPortStatus(port, 4, evt.evtBuff);

                        if (rcode)
                                continue;

                        rcode = PortStatusChange(port, evt);

                        if (rcode == HUB_ERROR_PORT_HAS_BEEN_RESET)
                                return 0;

                        if (rcode)
                                return rcode;
                }
        } // for

        for (uint8_t port = 1; port <= bNbrPorts; port++) {
                HubEvent evt;
                evt.bmEvent = 0;

                rcode = GetPortStatus(port, 4, evt.evtBuff);

                if (rcode)
                        continue;

                if ((evt.bmStatus & bmHUB_PORT_STATE_CHECK_DISABLED) != bmHUB_PORT_STATE_DISABLED)
                        continue;

                // Emulate connection event for the port
                evt.bmChange |= bmHUB_PORT_STATUS_C_PORT_CONNECTION;

                rcode = PortStatusChange(port, evt);

                if (rcode == HUB_ERROR_PORT_HAS_BEEN_RESET)
                        return 0;

                if (rcode)
                        return rcode;
        } // for
        return 0;
}

uint8_t USBHub::PortStatusChange(uint8_t port, HubEvent &evt) {
        switch (evt.bmEvent) {
                        // Device connected event
                case bmHUB_PORT_EVENT_CONNECT:
                case bmHUB_PORT_EVENT_LS_CONNECT:
                        if (bResetInitiated)
                                return 0;

                        ClearPortFeature(HUB_FEATURE_C_PORT_ENABLE, port, 0);
                        ClearPortFeature(HUB_FEATURE_C_PORT_CONNECTION, port, 0);
                        SetPortFeature(HUB_FEATURE_PORT_RESET, port, 0);
                        bResetInitiated = true;
                        return HUB_ERROR_PORT_HAS_BEEN_RESET;

                        // Device disconnected event
                case bmHUB_PORT_EVENT_DISCONNECT:
                        ClearPortFeature(HUB_FEATURE_C_PORT_ENABLE, port, 0);
                        ClearPortFeature(HUB_FEATURE_C_PORT_CONNECTION, port, 0);
                        bResetInitiated = false;

                        UsbDeviceAddress a;
                        a.bmHub = 0;
                        a.bmParent = bAddress;
                        a.bmAddress = port;
                        pUsb->ReleaseDevice(a.devAddress);
                        return 0;

                        // Reset complete event
                case bmHUB_PORT_EVENT_RESET_COMPLETE:
                case bmHUB_PORT_EVENT_LS_RESET_COMPLETE:
                        ClearPortFeature(HUB_FEATURE_C_PORT_RESET, port, 0);
                        ClearPortFeature(HUB_FEATURE_C_PORT_CONNECTION, port, 0);

                        delay(20);

                        a.devAddress = bAddress;

                        pUsb->Configuring(a.bmAddress, port, (evt.bmStatus & bmHUB_PORT_STATUS_PORT_LOW_SPEED));
                        bResetInitiated = false;
                        break;

        } // switch (evt.bmEvent)
        return 0;
}

void PrintHubPortStatus(USBHub *hubptr, uint8_t addr, uint8_t port, bool print_changes) {
        uint8_t rcode = 0;
        HubEvent evt;

        rcode = hubptr->GetPortStatus(port, 4, evt.evtBuff);

        if (rcode) {
                USB_HOST_SERIAL.println("ERROR!");
                return;
        }
        USB_HOST_SERIAL.print("\r\nPort ");
        USB_HOST_SERIAL.println(port, DEC);

        USB_HOST_SERIAL.println("Status");
        USB_HOST_SERIAL.print("CONNECTION:\t");
        USB_HOST_SERIAL.println((evt.bmStatus & bmHUB_PORT_STATUS_PORT_CONNECTION) > 0, DEC);
        USB_HOST_SERIAL.print("ENABLE:\t\t");
        USB_HOST_SERIAL.println((evt.bmStatus & bmHUB_PORT_STATUS_PORT_ENABLE) > 0, DEC);
        USB_HOST_SERIAL.print("SUSPEND:\t");
        USB_HOST_SERIAL.println((evt.bmStatus & bmHUB_PORT_STATUS_PORT_SUSPEND) > 0, DEC);
        USB_HOST_SERIAL.print("OVER_CURRENT:\t");
        USB_HOST_SERIAL.println((evt.bmStatus & bmHUB_PORT_STATUS_PORT_OVER_CURRENT) > 0, DEC);
        USB_HOST_SERIAL.print("RESET:\t\t");
        USB_HOST_SERIAL.println((evt.bmStatus & bmHUB_PORT_STATUS_PORT_RESET) > 0, DEC);
        USB_HOST_SERIAL.print("POWER:\t\t");
        USB_HOST_SERIAL.println((evt.bmStatus & bmHUB_PORT_STATUS_PORT_POWER) > 0, DEC);
        USB_HOST_SERIAL.print("LOW_SPEED:\t");
        USB_HOST_SERIAL.println((evt.bmStatus & bmHUB_PORT_STATUS_PORT_LOW_SPEED) > 0, DEC);
        USB_HOST_SERIAL.print("HIGH_SPEED:\t");
        USB_HOST_SERIAL.println((evt.bmStatus & bmHUB_PORT_STATUS_PORT_HIGH_SPEED) > 0, DEC);
        USB_HOST_SERIAL.print("TEST:\t\t");
        USB_HOST_SERIAL.println((evt.bmStatus & bmHUB_PORT_STATUS_PORT_TEST) > 0, DEC);
        USB_HOST_SERIAL.print("INDICATOR:\t");
        USB_HOST_SERIAL.println((evt.bmStatus & bmHUB_PORT_STATUS_PORT_INDICATOR) > 0, DEC);

        if (!print_changes)
                return;

        USB_HOST_SERIAL.println("\r\nChange");
        USB_HOST_SERIAL.print("CONNECTION:\t");
        USB_HOST_SERIAL.println((evt.bmChange & bmHUB_PORT_STATUS_C_PORT_CONNECTION) > 0, DEC);
        USB_HOST_SERIAL.print("ENABLE:\t\t");
        USB_HOST_SERIAL.println((evt.bmChange & bmHUB_PORT_STATUS_C_PORT_ENABLE) > 0, DEC);
        USB_HOST_SERIAL.print("SUSPEND:\t");
        USB_HOST_SERIAL.println((evt.bmChange & bmHUB_PORT_STATUS_C_PORT_SUSPEND) > 0, DEC);
        USB_HOST_SERIAL.print("OVER_CURRENT:\t");
        USB_HOST_SERIAL.println((evt.bmChange & bmHUB_PORT_STATUS_C_PORT_OVER_CURRENT) > 0, DEC);
        USB_HOST_SERIAL.print("RESET:\t\t");
        USB_HOST_SERIAL.println((evt.bmChange & bmHUB_PORT_STATUS_C_PORT_RESET) > 0, DEC);
}