/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. This software may be distributed and modified under the terms of the GNU General Public License version 2 (GPL2) as published by the Free Software Foundation and appearing in the file GPL2.TXT included in the packaging of this file. Please note that GPL2 Section 2[b] requires that all works based on this software must also be made publicly available under the terms of the GPL2 ("Copyleft"). Contact information ------------------- Circuits At Home, LTD Web : http://www.circuitsathome.com e-mail : support@circuitsathome.com */ /* derived from Konstantin Chizhov's AVR port templates */ #if !defined(_usb_h_) || defined(_avrpins_h_) #error "Never include avrpins.h directly; include Usb.h instead" #else #define _avrpins_h_ #if defined(__AVR__) // pointers are 16 bits on AVR #define pgm_read_pointer(p) pgm_read_word(p) // Support for these boards needs to be manually activated in settings.h or in a makefile #if !defined(BOARD_MEGA_ADK) && defined(__AVR_ATmega2560__) && (USE_UHS_MEGA_ADK || defined(ARDUINO_AVR_ADK)) #define BOARD_MEGA_ADK #elif !defined(BOARD_BLACK_WIDDOW) && USE_UHS_BLACK_WIDDOW #define BOARD_BLACK_WIDDOW #endif #ifdef PORTA #define USE_PORTA #endif #ifdef PORTB #define USE_PORTB #endif #ifdef PORTC #define USE_PORTC #endif #ifdef PORTD #define USE_PORTD #endif #ifdef PORTE #define USE_PORTE #endif #ifdef PORTF #define USE_PORTF #endif #ifdef PORTG #define USE_PORTG #endif #ifdef PORTH #define USE_PORTH #endif #ifdef PORTJ #define USE_PORTJ #endif #ifdef PORTK #define USE_PORTK #endif #ifdef PORTL #define USE_PORTL #endif #ifdef PORTQ #define USE_PORTQ #endif #ifdef PORTR #define USE_PORTR #endif #ifdef TCCR0A #define USE_TCCR0A #endif #ifdef TCCR1A #define USE_TCCR1A #endif #ifdef TCCR2A #define USE_TCCR2A #endif //Port definitions for AtTiny, AtMega families. #define MAKE_PORT(portName, ddrName, pinName, className, ID) \ class className{\ public:\ typedef uint8_t DataT;\ public:\ static void Write(DataT value){portName = value;}\ static void ClearAndSet(DataT clearMask, DataT value){portName = (portName & ~clearMask) | value;}\ static DataT Read(){return portName;}\ static void DirWrite(DataT value){ddrName = value;}\ static DataT DirRead(){return ddrName;}\ static void Set(DataT value){portName |= value;}\ static void Clear(DataT value){portName &= ~value;}\ static void Toggle(DataT value){portName ^= value;}\ static void DirSet(DataT value){ddrName |= value;}\ static void DirClear(DataT value){ddrName &= ~value;}\ static void DirToggle(DataT value){ddrName ^= value;}\ static DataT PinRead(){return pinName;}\ enum{Id = ID};\ enum{Width=sizeof(DataT)*8};\ }; // TCCR registers to set/clear Arduino PWM #define MAKE_TCCR(TccrName, className) \ class className{\ public:\ typedef uint8_t DataT;\ public:\ static void Write(DataT value){TccrName = value;}\ static void ClearAndSet(DataT clearMask, DataT value){TccrName = (TccrName & ~clearMask) | value;}\ static DataT Read(){return TccrName;}\ static void Set(DataT value){TccrName |= value;}\ static void Clear(DataT value){TccrName &= ~value;}\ static void Toggle(DataT value){TccrName ^= value;}\ enum{Width=sizeof(DataT)*8};\ }; #ifdef USE_PORTA MAKE_PORT(PORTA, DDRA, PINA, Porta, 'A') #endif #ifdef USE_PORTB MAKE_PORT(PORTB, DDRB, PINB, Portb, 'B') #endif #ifdef USE_PORTC MAKE_PORT(PORTC, DDRC, PINC, Portc, 'C') #endif #ifdef USE_PORTD MAKE_PORT(PORTD, DDRD, PIND, Portd, 'D') #endif #ifdef USE_PORTE MAKE_PORT(PORTE, DDRE, PINE, Porte, 'E') #endif #ifdef USE_PORTF MAKE_PORT(PORTF, DDRF, PINF, Portf, 'F') #endif #ifdef USE_PORTG MAKE_PORT(PORTG, DDRG, PING, Portg, 'G') #endif #ifdef USE_PORTH MAKE_PORT(PORTH, DDRH, PINH, Porth, 'H') #endif #ifdef USE_PORTJ MAKE_PORT(PORTJ, DDRJ, PINJ, Portj, 'J') #endif #ifdef USE_PORTK MAKE_PORT(PORTK, DDRK, PINK, Portk, 'K') #endif #ifdef USE_PORTL MAKE_PORT(PORTL, DDRL, PINL, Portl, 'L') #endif #ifdef USE_PORTQ MAKE_PORT(PORTQ, DDRQ, PINQ, Portq, 'Q') #endif #ifdef USE_PORTR MAKE_PORT(PORTR, DDRR, PINR, Portr, 'R') #endif #ifdef USE_TCCR0A MAKE_TCCR(TCCR0A, Tccr0a) #endif #ifdef USE_TCCR1A MAKE_TCCR(TCCR1A, Tccr1a) #endif #ifdef USE_TCCR2A MAKE_TCCR(TCCR2A, Tccr2a) #endif // this class represents one pin in a IO port. // It is fully static. template class TPin { // BOOST_STATIC_ASSERT(PIN < PORT::Width); public: typedef PORT Port; enum { Number = PIN }; static void Set() { PORT::Set(1 << PIN); } static void Set(uint8_t val) { if(val) Set(); else Clear(); } static void SetDir(uint8_t val) { if(val) SetDirWrite(); else SetDirRead(); } static void Clear() { PORT::Clear(1 << PIN); } static void Toggle() { PORT::Toggle(1 << PIN); } static void SetDirRead() { PORT::DirClear(1 << PIN); } static void SetDirWrite() { PORT::DirSet(1 << PIN); } static uint8_t IsSet() { return PORT::PinRead() & (uint8_t)(1 << PIN); } static void WaiteForSet() { while(IsSet() == 0) { } } static void WaiteForClear() { while(IsSet()) { } } }; //class TPin... // this class represents one bit in TCCR port. // used to set/clear TCCRx bits // It is fully static. template class TCom { // BOOST_STATIC_ASSERT(PIN < PORT::Width); public: typedef TCCR Tccr; enum { Com = COM }; static void Set() { TCCR::Set(1 << COM); } static void Clear() { TCCR::Clear(1 << COM); } static void Toggle() { TCCR::Toggle(1 << COM); } }; //class TCom... //Short pin definitions #ifdef USE_PORTA typedef TPin Pa0; typedef TPin Pa1; typedef TPin Pa2; typedef TPin Pa3; typedef TPin Pa4; typedef TPin Pa5; typedef TPin Pa6; typedef TPin Pa7; #endif #ifdef USE_PORTB typedef TPin Pb0; typedef TPin Pb1; typedef TPin Pb2; typedef TPin Pb3; typedef TPin Pb4; typedef TPin Pb5; typedef TPin Pb6; typedef TPin Pb7; #endif #ifdef USE_PORTC typedef TPin Pc0; typedef TPin Pc1; typedef TPin Pc2; typedef TPin Pc3; typedef TPin Pc4; typedef TPin Pc5; typedef TPin Pc6; typedef TPin Pc7; #endif #ifdef USE_PORTD typedef TPin Pd0; typedef TPin Pd1; typedef TPin Pd2; typedef TPin Pd3; typedef TPin Pd4; typedef TPin Pd5; typedef TPin Pd6; typedef TPin Pd7; #endif #ifdef USE_PORTE typedef TPin Pe0; typedef TPin Pe1; typedef TPin Pe2; typedef TPin Pe3; typedef TPin Pe4; typedef TPin Pe5; typedef TPin Pe6; typedef TPin Pe7; #endif #ifdef USE_PORTF typedef TPin Pf0; typedef TPin Pf1; typedef TPin Pf2; typedef TPin Pf3; typedef TPin Pf4; typedef TPin Pf5; typedef TPin Pf6; typedef TPin Pf7; #endif #ifdef USE_PORTG typedef TPin Pg0; typedef TPin Pg1; typedef TPin Pg2; typedef TPin Pg3; typedef TPin Pg4; typedef TPin Pg5; typedef TPin Pg6; typedef TPin Pg7; #endif #ifdef USE_PORTH typedef TPin Ph0; typedef TPin Ph1; typedef TPin Ph2; typedef TPin Ph3; typedef TPin Ph4; typedef TPin Ph5; typedef TPin Ph6; typedef TPin Ph7; #endif #ifdef USE_PORTJ typedef TPin Pj0; typedef TPin Pj1; typedef TPin Pj2; typedef TPin Pj3; typedef TPin Pj4; typedef TPin Pj5; typedef TPin Pj6; typedef TPin Pj7; #endif #ifdef USE_PORTK typedef TPin Pk0; typedef TPin Pk1; typedef TPin Pk2; typedef TPin Pk3; typedef TPin Pk4; typedef TPin Pk5; typedef TPin Pk6; typedef TPin Pk7; #endif #ifdef USE_PORTL typedef TPin Pl0; typedef TPin Pl1; typedef TPin Pl2; typedef TPin Pl3; typedef TPin Pl4; typedef TPin Pl5; typedef TPin Pl6; typedef TPin Pl7; #endif #ifdef USE_PORTQ typedef TPin Pq0; typedef TPin Pq1; typedef TPin Pq2; typedef TPin Pq3; typedef TPin Pq4; typedef TPin Pq5; typedef TPin Pq6; typedef TPin Pq7; #endif #ifdef USE_PORTR typedef TPin Pr0; typedef TPin Pr1; typedef TPin Pr2; typedef TPin Pr3; typedef TPin Pr4; typedef TPin Pr5; typedef TPin Pr6; typedef TPin Pr7; #endif #ifdef USE_TCCR0A typedef TCom Tc0a; //P6 typedef TCom Tc0b; //P5 #endif #ifdef USE_TCCR1A typedef TCom Tc1a; //P9 typedef TCom Tc1b; //P10 #endif #ifdef USE_TCCR2A typedef TCom Tc2a; //P11 typedef TCom Tc2b; //P3 #endif template class Tp_Tc { public: static void SetDir(uint8_t val) { if(val) SetDirWrite(); else SetDirRead(); } static void SetDirRead() { Tp_pin::SetDirRead(); //set pin direction Tc_bit::Clear(); //disconnect pin from PWM } static void SetDirWrite() { Tp_pin::SetDirWrite(); Tc_bit::Clear(); } }; /* pin definitions for cases where it's necessary to clear compare output mode bits */ //typedef Tp_Tc P3; //Arduino pin 3 //typedef Tp_Tc P5; //Arduino pin 5 //typedef Tp_Tc P6; //Arduino pin 6 //typedef Tp_Tc P9; //Arduino pin 9 //typedef Tp_Tc P10; //Arduino pin 10 //typedef Tp_Tc P11; //Arduino pin 11 /* Arduino pin definitions */ #if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) // "Mega" Arduino pin numbers #define P0 Pe0 #define P1 Pe1 #define P2 Pe4 #define P3 Pe5 #define P4 Pg5 #define P5 Pe3 #define P6 Ph3 #define P7 Ph4 #define P8 Ph5 #define P9 Ph6 #define P10 Pb4 #define P11 Pb5 #define P12 Pb6 #define P13 Pb7 #define P14 Pj1 #define P15 Pj0 #define P16 Ph1 #define P17 Ph0 #define P18 Pd3 #define P19 Pd2 #define P20 Pd1 #define P21 Pd0 #define P22 Pa0 #define P23 Pa1 #define P24 Pa2 #define P25 Pa3 #define P26 Pa4 #define P27 Pa5 #define P28 Pa6 #define P29 Pa7 #define P30 Pc7 #define P31 Pc6 #define P32 Pc5 #define P33 Pc4 #define P34 Pc3 #define P35 Pc2 #define P36 Pc1 #define P37 Pc0 #define P38 Pd7 #define P39 Pg2 #define P40 Pg1 #define P41 Pg0 #define P42 Pl7 #define P43 Pl6 #define P44 Pl5 #define P45 Pl4 #define P46 Pl3 #define P47 Pl2 #define P48 Pl1 #define P49 Pl0 #define P50 Pb3 #define P51 Pb2 #define P52 Pb1 #define P53 Pb0 #ifdef BOARD_MEGA_ADK // These pins are not broken out on the Arduino ADK #define P54 Pe6 // INT on Arduino ADK #define P55 Pj2 // MAX_RESET on Arduino ADK #endif // "Mega" pin numbers #elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) // "Classic" Arduino pin numbers #define P0 Pd0 #define P1 Pd1 #define P2 Pd2 #define P3 Pd3 #define P4 Pd4 #define P5 Pd5 #define P6 Pd6 #define P7 Pd7 #define P8 Pb0 #define P9 Pb1 #define P10 Pb2 #define P11 Pb3 #define P12 Pb4 #define P13 Pb5 #define P14 Pc0 #define P15 Pc1 #define P16 Pc2 #define P17 Pc3 #define P18 Pc4 #define P19 Pc5 // "Classic" Arduino pin numbers #elif defined(CORE_TEENSY) && defined(__AVR_ATmega32U4__) // Teensy 2.0 pin numbers // http://www.pjrc.com/teensy/pinout.html #define P0 Pb0 #define P1 Pb1 #define P2 Pb2 #define P3 Pb3 #define P4 Pb7 #define P5 Pd0 #define P6 Pd1 #define P7 Pd2 #define P8 Pd3 #define P9 Pc6 #define P10 Pc7 #define P11 Pd6 #define P12 Pd7 #define P13 Pb4 #define P14 Pb5 #define P15 Pb6 #define P16 Pf7 #define P17 Pf6 #define P18 Pf5 #define P19 Pf4 #define P20 Pf1 #define P21 Pf0 #define P22 Pd4 #define P23 Pd5 #define P24 Pe6 // Teensy 2.0 #elif defined(__AVR_ATmega32U4__) // Arduino Leonardo pin numbers #define P0 Pd2 // D0 - PD2 #define P1 Pd3 // D1 - PD3 #define P2 Pd1 // D2 - PD1 #define P3 Pd0 // D3 - PD0 #define P4 Pd4 // D4 - PD4 #define P5 Pc6 // D5 - PC6 #define P6 Pd7 // D6 - PD7 #define P7 Pe6 // D7 - PE6 #define P8 Pb4 // D8 - PB4 #define P9 Pb5 // D9 - PB5 #define P10 Pb6 // D10 - PB6 #define P11 Pb7 // D11 - PB7 #define P12 Pd6 // D12 - PD6 #define P13 Pc7 // D13 - PC7 #define P14 Pb3 // D14 - MISO - PB3 #define P15 Pb1 // D15 - SCK - PB1 #define P16 Pb2 // D16 - MOSI - PB2 #define P17 Pb0 // D17 - SS - PB0 #define P18 Pf7 // D18 - A0 - PF7 #define P19 Pf6 // D19 - A1 - PF6 #define P20 Pf5 // D20 - A2 - PF5 #define P21 Pf4 // D21 - A3 - PF4 #define P22 Pf1 // D22 - A4 - PF1 #define P23 Pf0 // D23 - A5 - PF0 #define P24 Pd4 // D24 / D4 - A6 - PD4 #define P25 Pd7 // D25 / D6 - A7 - PD7 #define P26 Pb4 // D26 / D8 - A8 - PB4 #define P27 Pb5 // D27 / D9 - A9 - PB5 #define P28 Pb6 // D28 / D10 - A10 - PB6 #define P29 Pd6 // D29 / D12 - A11 - PD6 // Arduino Leonardo pin numbers #elif defined(CORE_TEENSY) && (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)) // Teensy++ 1.0 and 2.0 pin numbers // http://www.pjrc.com/teensy/pinout.html #define P0 Pd0 #define P1 Pd1 #define P2 Pd2 #define P3 Pd3 #define P4 Pd4 #define P5 Pd5 #define P6 Pd6 #define P7 Pd7 #define P8 Pe0 #define P9 Pe1 #define P10 Pc0 #define P11 Pc1 #define P12 Pc2 #define P13 Pc3 #define P14 Pc4 #define P15 Pc5 #define P16 Pc6 #define P17 Pc7 #define P18 Pe6 #define P19 Pe7 #define P20 Pb0 #define P21 Pb1 #define P22 Pb2 #define P23 Pb3 #define P24 Pb4 #define P25 Pb5 #define P26 Pb6 #define P27 Pb7 #define P28 Pa0 #define P29 Pa1 #define P30 Pa2 #define P31 Pa3 #define P32 Pa4 #define P33 Pa5 #define P34 Pa6 #define P35 Pa7 #define P36 Pe4 #define P37 Pe5 #define P38 Pf0 #define P39 Pf1 #define P40 Pf2 #define P41 Pf3 #define P42 Pf4 #define P43 Pf5 #define P44 Pf6 #define P45 Pf7 // Teensy++ 1.0 and 2.0 #elif defined(ARDUINO_AVR_BALANDUINO) && (defined(__AVR_ATmega644__) || defined(__AVR_ATmega1284P__)) // Balanduino pin numbers // http://balanduino.net/ #define P0 Pd0 /* 0 - PD0 */ #define P1 Pd1 /* 1 - PD1 */ #if BALANDUINO_REVISION < 13 #define P2 Pb2 /* 2 - PB2 */ #define P3 Pd6 /* 3 - PD6 */ #define P4 Pd7 /* 4 - PD7 */ #define P5 Pb3 /* 5 - PB3 */ #else #define P2 Pd2 /* 2 - PD2 */ #define P3 Pd3 /* 3 - PD3 */ #define P4 Pd6 /* 4 - PD6 */ #define P5 Pd7 /* 5 - PD7 */ #endif #define P6 Pb4 /* 6 - PB4 */ #define P7 Pa0 /* 7 - PA0 */ #define P8 Pa1 /* 8 - PA1 */ #define P9 Pa2 /* 9 - PA2 */ #define P10 Pa3 /* 10 - PA3 */ #define P11 Pa4 /* 11 - PA4 */ #define P12 Pa5 /* 12 - PA5 */ #define P13 Pc1 /* 13 - PC1 */ #define P14 Pc0 /* 14 - PC0 */ #if BALANDUINO_REVISION < 13 #define P15 Pd2 /* 15 - PD2 */ #define P16 Pd3 /* 16 - PD3 */ #else #define P15 Pb2 /* 15 - PB2 */ #define P16 Pb3 /* 16 - PB2 */ #endif #define P17 Pd4 /* 17 - PD4 */ #define P18 Pd5 /* 18 - PD5 */ #define P19 Pc2 /* 19 - PC2 */ #define P20 Pc3 /* 20 - PC3 */ #define P21 Pc4 /* 21 - PC4 */ #define P22 Pc5 /* 22 - PC5 */ #define P23 Pc6 /* 23 - PC6 */ #define P24 Pc7 /* 24 - PC7 */ #define P25 Pb0 /* 25 - PB0 */ #define P26 Pb1 /* 26 - PB1 */ #define P27 Pb5 /* 27 - PB5 */ #define P28 Pb6 /* 28 - PB6 */ #define P29 Pb7 /* 29 - PB7 */ #define P30 Pa6 /* 30 - PA6 */ #define P31 Pa7 /* 31 - PA7 */ // Balanduino #elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__) // Sanguino pin numbers // Homepage: http://sanguino.cc/hardware // Hardware add-on: https://github.com/Lauszus/Sanguino #define P0 Pb0 #define P1 Pb1 #define P2 Pb2 #define P3 Pb3 #define P4 Pb4 #define P5 Pb5 #define P6 Pb6 #define P7 Pb7 #define P8 Pd0 #define P9 Pd1 #define P10 Pd2 #define P11 Pd3 #define P12 Pd4 #define P13 Pd5 #define P14 Pd6 #define P15 Pd7 #define P16 Pc0 #define P17 Pc1 #define P18 Pc2 #define P19 Pc3 #define P20 Pc4 #define P21 Pc5 #define P22 Pc6 #define P23 Pc7 #define P24 Pa0 #define P25 Pa1 #define P26 Pa2 #define P27 Pa3 #define P28 Pa4 #define P29 Pa5 #define P30 Pa6 #define P31 Pa7 // Sanguino #else #error "Please define board in avrpins.h" #endif // Arduino pin definitions #elif defined(__arm__) // pointers are 32 bits on ARM #define pgm_read_pointer(p) pgm_read_dword(p) #if defined(CORE_TEENSY) && (defined(__MK20DX128__) || defined(__MK20DX256__) || defined(__MK64FX512__) || defined(__MK66FX1M0__)) #include "core_pins.h" #include "avr_emulation.h" #define GPIO_BITBAND_ADDR(reg, bit) (((uint32_t)&(reg) - 0x40000000) * 32 + (bit) * 4 + 0x42000000) #define GPIO_BITBAND_PTR(reg, bit) ((uint8_t *)GPIO_BITBAND_ADDR((reg), (bit))) #define MAKE_PIN(className, baseReg, pinNum, configReg) \ class className { \ public: \ static void Set() { \ *GPIO_BITBAND_PTR(baseReg, pinNum) = 1; \ } \ static void Clear() { \ *GPIO_BITBAND_PTR(baseReg, pinNum) = 0; \ } \ static void SetDirRead() { \ configReg = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); \ *(GPIO_BITBAND_PTR(baseReg, pinNum) + 640) = 0; \ } \ static void SetDirWrite() { \ configReg = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); \ *(GPIO_BITBAND_PTR(baseReg, pinNum) + 640) = 1; \ } \ static uint8_t IsSet() { \ return *(GPIO_BITBAND_PTR(baseReg, pinNum) + 512); \ } \ }; MAKE_PIN(P0, CORE_PIN0_PORTREG, CORE_PIN0_BIT, CORE_PIN0_CONFIG); MAKE_PIN(P1, CORE_PIN1_PORTREG, CORE_PIN1_BIT, CORE_PIN1_CONFIG); MAKE_PIN(P2, CORE_PIN2_PORTREG, CORE_PIN2_BIT, CORE_PIN2_CONFIG); MAKE_PIN(P3, CORE_PIN3_PORTREG, CORE_PIN3_BIT, CORE_PIN3_CONFIG); MAKE_PIN(P4, CORE_PIN4_PORTREG, CORE_PIN4_BIT, CORE_PIN4_CONFIG); MAKE_PIN(P5, CORE_PIN5_PORTREG, CORE_PIN5_BIT, CORE_PIN5_CONFIG); MAKE_PIN(P6, CORE_PIN6_PORTREG, CORE_PIN6_BIT, CORE_PIN6_CONFIG); MAKE_PIN(P7, CORE_PIN7_PORTREG, CORE_PIN7_BIT, CORE_PIN7_CONFIG); MAKE_PIN(P8, CORE_PIN8_PORTREG, CORE_PIN8_BIT, CORE_PIN8_CONFIG); MAKE_PIN(P9, CORE_PIN9_PORTREG, CORE_PIN9_BIT, CORE_PIN9_CONFIG); MAKE_PIN(P10, CORE_PIN10_PORTREG, CORE_PIN10_BIT, CORE_PIN10_CONFIG); MAKE_PIN(P11, CORE_PIN11_PORTREG, CORE_PIN11_BIT, CORE_PIN11_CONFIG); MAKE_PIN(P12, CORE_PIN12_PORTREG, CORE_PIN12_BIT, CORE_PIN12_CONFIG); MAKE_PIN(P13, CORE_PIN13_PORTREG, CORE_PIN13_BIT, CORE_PIN13_CONFIG); MAKE_PIN(P14, CORE_PIN14_PORTREG, CORE_PIN14_BIT, CORE_PIN14_CONFIG); MAKE_PIN(P15, CORE_PIN15_PORTREG, CORE_PIN15_BIT, CORE_PIN15_CONFIG); MAKE_PIN(P16, CORE_PIN16_PORTREG, CORE_PIN16_BIT, CORE_PIN16_CONFIG); MAKE_PIN(P17, CORE_PIN17_PORTREG, CORE_PIN17_BIT, CORE_PIN17_CONFIG); MAKE_PIN(P18, CORE_PIN18_PORTREG, CORE_PIN18_BIT, CORE_PIN18_CONFIG); MAKE_PIN(P19, CORE_PIN19_PORTREG, CORE_PIN19_BIT, CORE_PIN19_CONFIG); MAKE_PIN(P20, CORE_PIN20_PORTREG, CORE_PIN20_BIT, CORE_PIN20_CONFIG); MAKE_PIN(P21, CORE_PIN21_PORTREG, CORE_PIN21_BIT, CORE_PIN21_CONFIG); MAKE_PIN(P22, CORE_PIN22_PORTREG, CORE_PIN22_BIT, CORE_PIN22_CONFIG); MAKE_PIN(P23, CORE_PIN23_PORTREG, CORE_PIN23_BIT, CORE_PIN23_CONFIG); MAKE_PIN(P24, CORE_PIN24_PORTREG, CORE_PIN24_BIT, CORE_PIN24_CONFIG); MAKE_PIN(P25, CORE_PIN25_PORTREG, CORE_PIN25_BIT, CORE_PIN25_CONFIG); MAKE_PIN(P26, CORE_PIN26_PORTREG, CORE_PIN26_BIT, CORE_PIN26_CONFIG); MAKE_PIN(P27, CORE_PIN27_PORTREG, CORE_PIN27_BIT, CORE_PIN27_CONFIG); MAKE_PIN(P28, CORE_PIN28_PORTREG, CORE_PIN28_BIT, CORE_PIN28_CONFIG); MAKE_PIN(P29, CORE_PIN29_PORTREG, CORE_PIN29_BIT, CORE_PIN29_CONFIG); MAKE_PIN(P30, CORE_PIN30_PORTREG, CORE_PIN30_BIT, CORE_PIN30_CONFIG); MAKE_PIN(P31, CORE_PIN31_PORTREG, CORE_PIN31_BIT, CORE_PIN31_CONFIG); MAKE_PIN(P32, CORE_PIN32_PORTREG, CORE_PIN32_BIT, CORE_PIN32_CONFIG); MAKE_PIN(P33, CORE_PIN33_PORTREG, CORE_PIN33_BIT, CORE_PIN33_CONFIG); #if defined(__MK64FX512__) || defined(__MK66FX1M0__) MAKE_PIN(P34, CORE_PIN34_PORTREG, CORE_PIN34_BIT, CORE_PIN34_CONFIG); MAKE_PIN(P35, CORE_PIN35_PORTREG, CORE_PIN35_BIT, CORE_PIN35_CONFIG); MAKE_PIN(P36, CORE_PIN36_PORTREG, CORE_PIN36_BIT, CORE_PIN36_CONFIG); MAKE_PIN(P37, CORE_PIN37_PORTREG, CORE_PIN37_BIT, CORE_PIN37_CONFIG); MAKE_PIN(P38, CORE_PIN38_PORTREG, CORE_PIN38_BIT, CORE_PIN38_CONFIG); MAKE_PIN(P39, CORE_PIN39_PORTREG, CORE_PIN39_BIT, CORE_PIN39_CONFIG); MAKE_PIN(P40, CORE_PIN40_PORTREG, CORE_PIN40_BIT, CORE_PIN40_CONFIG); MAKE_PIN(P41, CORE_PIN41_PORTREG, CORE_PIN41_BIT, CORE_PIN41_CONFIG); MAKE_PIN(P42, CORE_PIN42_PORTREG, CORE_PIN42_BIT, CORE_PIN42_CONFIG); MAKE_PIN(P43, CORE_PIN43_PORTREG, CORE_PIN43_BIT, CORE_PIN43_CONFIG); MAKE_PIN(P44, CORE_PIN44_PORTREG, CORE_PIN44_BIT, CORE_PIN44_CONFIG); MAKE_PIN(P45, CORE_PIN45_PORTREG, CORE_PIN45_BIT, CORE_PIN45_CONFIG); MAKE_PIN(P46, CORE_PIN46_PORTREG, CORE_PIN46_BIT, CORE_PIN46_CONFIG); MAKE_PIN(P47, CORE_PIN47_PORTREG, CORE_PIN47_BIT, CORE_PIN47_CONFIG); MAKE_PIN(P48, CORE_PIN48_PORTREG, CORE_PIN48_BIT, CORE_PIN48_CONFIG); MAKE_PIN(P49, CORE_PIN49_PORTREG, CORE_PIN49_BIT, CORE_PIN49_CONFIG); MAKE_PIN(P50, CORE_PIN50_PORTREG, CORE_PIN50_BIT, CORE_PIN50_CONFIG); MAKE_PIN(P51, CORE_PIN51_PORTREG, CORE_PIN51_BIT, CORE_PIN51_CONFIG); MAKE_PIN(P52, CORE_PIN52_PORTREG, CORE_PIN52_BIT, CORE_PIN52_CONFIG); MAKE_PIN(P53, CORE_PIN53_PORTREG, CORE_PIN53_BIT, CORE_PIN53_CONFIG); MAKE_PIN(P54, CORE_PIN54_PORTREG, CORE_PIN54_BIT, CORE_PIN54_CONFIG); MAKE_PIN(P55, CORE_PIN55_PORTREG, CORE_PIN55_BIT, CORE_PIN55_CONFIG); MAKE_PIN(P56, CORE_PIN56_PORTREG, CORE_PIN56_BIT, CORE_PIN56_CONFIG); MAKE_PIN(P57, CORE_PIN57_PORTREG, CORE_PIN57_BIT, CORE_PIN57_CONFIG); MAKE_PIN(P58, CORE_PIN58_PORTREG, CORE_PIN58_BIT, CORE_PIN58_CONFIG); MAKE_PIN(P59, CORE_PIN59_PORTREG, CORE_PIN59_BIT, CORE_PIN59_CONFIG); MAKE_PIN(P60, CORE_PIN60_PORTREG, CORE_PIN60_BIT, CORE_PIN60_CONFIG); MAKE_PIN(P61, CORE_PIN61_PORTREG, CORE_PIN61_BIT, CORE_PIN61_CONFIG); MAKE_PIN(P62, CORE_PIN62_PORTREG, CORE_PIN62_BIT, CORE_PIN62_CONFIG); MAKE_PIN(P63, CORE_PIN63_PORTREG, CORE_PIN63_BIT, CORE_PIN63_CONFIG); #endif #undef MAKE_PIN #elif defined(CORE_TEENSY) && (defined(__MKL26Z64__)) // we could get lower level by making these macros work properly. // for now just use the semi optimised version, it costs a lookup in the pin pgm table per op // but for now it will do. //#define GPIO_BITBAND_ADDR(reg, bit) (((volatile uint8_t *)&(reg) + ((bit) >> 3))) //#define GPIO_BITBAND_MASK(reg, bit) (1<<((bit) & 7)) //#define GPIO_BITBAND_PTR(reg, bit) ((volatile uint8_t *)GPIO_BITBAND_ADDR((reg), (bit))) #include "core_pins.h" #include "avr_emulation.h" #define MAKE_PIN(className, baseReg, pinNum, configReg) \ class className { \ public: \ static void Set() { \ *portSetRegister(pinNum) = digitalPinToBitMask(pinNum); \ } \ static void Clear() { \ *portClearRegister(pinNum) = digitalPinToBitMask(pinNum); \ } \ static void SetDirRead() { \ configReg = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); \ *portModeRegister(pinNum) &= ~digitalPinToBitMask(pinNum); \ } \ static void SetDirWrite() { \ configReg = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); \ *portModeRegister(pinNum) |= digitalPinToBitMask(pinNum); \ } \ static uint8_t IsSet() { \ return (*portInputRegister(pinNum) & digitalPinToBitMask(pinNum)) ? 1 : 0; \ } \ }; MAKE_PIN(P0, CORE_PIN0_PORTREG, 0, CORE_PIN0_CONFIG); MAKE_PIN(P1, CORE_PIN1_PORTREG, 1, CORE_PIN1_CONFIG); MAKE_PIN(P2, CORE_PIN2_PORTREG, 2, CORE_PIN2_CONFIG); MAKE_PIN(P3, CORE_PIN3_PORTREG, 3, CORE_PIN3_CONFIG); MAKE_PIN(P4, CORE_PIN4_PORTREG, 4, CORE_PIN4_CONFIG); MAKE_PIN(P5, CORE_PIN5_PORTREG, 5, CORE_PIN5_CONFIG); MAKE_PIN(P6, CORE_PIN6_PORTREG, 6, CORE_PIN6_CONFIG); MAKE_PIN(P7, CORE_PIN7_PORTREG, 7, CORE_PIN7_CONFIG); MAKE_PIN(P8, CORE_PIN8_PORTREG, 8, CORE_PIN8_CONFIG); MAKE_PIN(P9, CORE_PIN9_PORTREG, 9, CORE_PIN9_CONFIG); MAKE_PIN(P10, CORE_PIN10_PORTREG, 10, CORE_PIN10_CONFIG); MAKE_PIN(P11, CORE_PIN11_PORTREG, 11, CORE_PIN11_CONFIG); MAKE_PIN(P12, CORE_PIN12_PORTREG, 12, CORE_PIN12_CONFIG); MAKE_PIN(P13, CORE_PIN13_PORTREG, 13, CORE_PIN13_CONFIG); MAKE_PIN(P14, CORE_PIN14_PORTREG, 14, CORE_PIN14_CONFIG); MAKE_PIN(P15, CORE_PIN15_PORTREG, 15, CORE_PIN15_CONFIG); MAKE_PIN(P16, CORE_PIN16_PORTREG, 16, CORE_PIN16_CONFIG); MAKE_PIN(P17, CORE_PIN17_PORTREG, 17, CORE_PIN17_CONFIG); MAKE_PIN(P18, CORE_PIN18_PORTREG, 18, CORE_PIN18_CONFIG); MAKE_PIN(P19, CORE_PIN19_PORTREG, 19, CORE_PIN19_CONFIG); MAKE_PIN(P20, CORE_PIN20_PORTREG, 20, CORE_PIN20_CONFIG); MAKE_PIN(P21, CORE_PIN21_PORTREG, 21, CORE_PIN21_CONFIG); MAKE_PIN(P22, CORE_PIN22_PORTREG, 22, CORE_PIN22_CONFIG); MAKE_PIN(P23, CORE_PIN23_PORTREG, 23, CORE_PIN23_CONFIG); MAKE_PIN(P24, CORE_PIN24_PORTREG, 24, CORE_PIN24_CONFIG); MAKE_PIN(P25, CORE_PIN25_PORTREG, 25, CORE_PIN25_CONFIG); MAKE_PIN(P26, CORE_PIN26_PORTREG, 26, CORE_PIN26_CONFIG); #undef MAKE_PIN #elif defined(ARDUINO_SAM_DUE) && defined(__SAM3X8E__) // SetDirRead: // Disable interrupts // Disable the pull up resistor // Set to INPUT // Enable PIO // SetDirWrite: // Disable interrupts // Disable the pull up resistor // Set to OUTPUT // Enable PIO #define MAKE_PIN(className, pio, pinMask) \ class className { \ public: \ static void Set() { \ pio->PIO_SODR = pinMask; \ } \ static void Clear() { \ pio->PIO_CODR = pinMask; \ } \ static void SetDirRead() { \ pio->PIO_IDR = pinMask ; \ pio->PIO_PUDR = pinMask; \ pio->PIO_ODR = pinMask; \ pio->PIO_PER = pinMask; \ } \ static void SetDirWrite() { \ pio->PIO_IDR = pinMask ; \ pio->PIO_PUDR = pinMask; \ pio->PIO_OER = pinMask; \ pio->PIO_PER = pinMask; \ } \ static uint8_t IsSet() { \ return pio->PIO_PDSR & pinMask; \ } \ }; // See: http://arduino.cc/en/Hacking/PinMappingSAM3X and variant.cpp MAKE_PIN(P0, PIOA, PIO_PA8); MAKE_PIN(P1, PIOA, PIO_PA9); MAKE_PIN(P2, PIOB, PIO_PB25); MAKE_PIN(P3, PIOC, PIO_PC28); MAKE_PIN(P4, PIOC, PIO_PC26); MAKE_PIN(P5, PIOC, PIO_PC25); MAKE_PIN(P6, PIOC, PIO_PC24); MAKE_PIN(P7, PIOC, PIO_PC23); MAKE_PIN(P8, PIOC, PIO_PC22); MAKE_PIN(P9, PIOC, PIO_PC21); MAKE_PIN(P10, PIOC, PIO_PC29); MAKE_PIN(P11, PIOD, PIO_PD7); MAKE_PIN(P12, PIOD, PIO_PD8); MAKE_PIN(P13, PIOB, PIO_PB27); MAKE_PIN(P14, PIOD, PIO_PD4); MAKE_PIN(P15, PIOD, PIO_PD5); MAKE_PIN(P16, PIOA, PIO_PA13); MAKE_PIN(P17, PIOA, PIO_PA12); MAKE_PIN(P18, PIOA, PIO_PA11); MAKE_PIN(P19, PIOA, PIO_PA10); MAKE_PIN(P20, PIOB, PIO_PB12); MAKE_PIN(P21, PIOB, PIO_PB13); MAKE_PIN(P22, PIOB, PIO_PB26); MAKE_PIN(P23, PIOA, PIO_PA14); MAKE_PIN(P24, PIOA, PIO_PA15); MAKE_PIN(P25, PIOD, PIO_PD0); MAKE_PIN(P26, PIOD, PIO_PD1); MAKE_PIN(P27, PIOD, PIO_PD2); MAKE_PIN(P28, PIOD, PIO_PD3); MAKE_PIN(P29, PIOD, PIO_PD6); MAKE_PIN(P30, PIOD, PIO_PD9); MAKE_PIN(P31, PIOA, PIO_PA7); MAKE_PIN(P32, PIOD, PIO_PD10); MAKE_PIN(P33, PIOC, PIO_PC1); MAKE_PIN(P34, PIOC, PIO_PC2); MAKE_PIN(P35, PIOC, PIO_PC3); MAKE_PIN(P36, PIOC, PIO_PC4); MAKE_PIN(P37, PIOC, PIO_PC5); MAKE_PIN(P38, PIOC, PIO_PC6); MAKE_PIN(P39, PIOC, PIO_PC7); MAKE_PIN(P40, PIOC, PIO_PC8); MAKE_PIN(P41, PIOC, PIO_PC9); MAKE_PIN(P42, PIOA, PIO_PA19); MAKE_PIN(P43, PIOA, PIO_PA20); MAKE_PIN(P44, PIOC, PIO_PC19); MAKE_PIN(P45, PIOC, PIO_PC18); MAKE_PIN(P46, PIOC, PIO_PC17); MAKE_PIN(P47, PIOC, PIO_PC16); MAKE_PIN(P48, PIOC, PIO_PC15); MAKE_PIN(P49, PIOC, PIO_PC14); MAKE_PIN(P50, PIOC, PIO_PC13); MAKE_PIN(P51, PIOC, PIO_PC12); MAKE_PIN(P52, PIOB, PIO_PB21); MAKE_PIN(P53, PIOB, PIO_PB14); MAKE_PIN(P54, PIOA, PIO_PA16); MAKE_PIN(P55, PIOA, PIO_PA24); MAKE_PIN(P56, PIOA, PIO_PA23); MAKE_PIN(P57, PIOA, PIO_PA22); MAKE_PIN(P58, PIOA, PIO_PA6); MAKE_PIN(P59, PIOA, PIO_PA4); MAKE_PIN(P60, PIOA, PIO_PA3); MAKE_PIN(P61, PIOA, PIO_PA2); MAKE_PIN(P62, PIOB, PIO_PB17); MAKE_PIN(P63, PIOB, PIO_PB18); MAKE_PIN(P64, PIOB, PIO_PB19); MAKE_PIN(P65, PIOB, PIO_PB20); MAKE_PIN(P66, PIOB, PIO_PB15); MAKE_PIN(P67, PIOB, PIO_PB16); MAKE_PIN(P68, PIOA, PIO_PA1); MAKE_PIN(P69, PIOA, PIO_PA0); MAKE_PIN(P70, PIOA, PIO_PA17); MAKE_PIN(P71, PIOA, PIO_PA18); MAKE_PIN(P72, PIOC, PIO_PC30); MAKE_PIN(P73, PIOA, PIO_PA21); MAKE_PIN(P74, PIOA, PIO_PA25); // MISO MAKE_PIN(P75, PIOA, PIO_PA26); // MOSI MAKE_PIN(P76, PIOA, PIO_PA27); // CLK MAKE_PIN(P77, PIOA, PIO_PA28); MAKE_PIN(P78, PIOB, PIO_PB23); // Unconnected #undef MAKE_PIN #elif defined(RBL_NRF51822) #define MAKE_PIN(className, pin) \ class className { \ public: \ static void Set() { \ nrf_gpio_pin_set(pin); \ } \ static void Clear() { \ nrf_gpio_pin_clear(pin); \ } \ static void SetDirRead() { \ nrf_gpio_cfg_input(pin, NRF_GPIO_PIN_NOPULL); \ } \ static void SetDirWrite() { \ nrf_gpio_cfg_output(pin); \ } \ static uint8_t IsSet() { \ return (uint8_t)nrf_gpio_pin_read(pin); \ } \ }; // See: pin_transform.c in RBL nRF51822 SDK MAKE_PIN(P0, Pin_nRF51822_to_Arduino(D0)); MAKE_PIN(P1, Pin_nRF51822_to_Arduino(D1)); MAKE_PIN(P2, Pin_nRF51822_to_Arduino(D2)); MAKE_PIN(P3, Pin_nRF51822_to_Arduino(D3)); MAKE_PIN(P4, Pin_nRF51822_to_Arduino(D4)); MAKE_PIN(P5, Pin_nRF51822_to_Arduino(D5)); MAKE_PIN(P6, Pin_nRF51822_to_Arduino(D6)); MAKE_PIN(P7, Pin_nRF51822_to_Arduino(D7)); MAKE_PIN(P8, Pin_nRF51822_to_Arduino(D8)); MAKE_PIN(P9, Pin_nRF51822_to_Arduino(D9)); // INT MAKE_PIN(P10, Pin_nRF51822_to_Arduino(D10)); // SS MAKE_PIN(P11, Pin_nRF51822_to_Arduino(D11)); MAKE_PIN(P12, Pin_nRF51822_to_Arduino(D12)); MAKE_PIN(P13, Pin_nRF51822_to_Arduino(D13)); MAKE_PIN(P14, Pin_nRF51822_to_Arduino(D14)); MAKE_PIN(P15, Pin_nRF51822_to_Arduino(D15)); MAKE_PIN(P17, Pin_nRF51822_to_Arduino(D17)); // MISO MAKE_PIN(P18, Pin_nRF51822_to_Arduino(D18)); // MOSI MAKE_PIN(P16, Pin_nRF51822_to_Arduino(D16)); // CLK MAKE_PIN(P19, Pin_nRF51822_to_Arduino(D19)); MAKE_PIN(P20, Pin_nRF51822_to_Arduino(D20)); MAKE_PIN(P21, Pin_nRF51822_to_Arduino(D21)); MAKE_PIN(P22, Pin_nRF51822_to_Arduino(D22)); MAKE_PIN(P23, Pin_nRF51822_to_Arduino(D23)); MAKE_PIN(P24, Pin_nRF51822_to_Arduino(D24)); #undef MAKE_PIN #elif defined(STM32F446xx) // NUCLEO-F446RE #define MAKE_PIN(className, port, pin) \ class className { \ public: \ static void Set() { \ HAL_GPIO_WritePin(port, pin, GPIO_PIN_SET); \ } \ static void Clear() { \ HAL_GPIO_WritePin(port, pin, GPIO_PIN_RESET); \ } \ static void SetDirRead() { \ static GPIO_InitTypeDef GPIO_InitStruct; \ GPIO_InitStruct.Pin = pin; \ GPIO_InitStruct.Mode = GPIO_MODE_INPUT; \ GPIO_InitStruct.Pull = GPIO_NOPULL; \ HAL_GPIO_Init(port, &GPIO_InitStruct); \ } \ static void SetDirWrite() { \ static GPIO_InitTypeDef GPIO_InitStruct; \ GPIO_InitStruct.Pin = pin; \ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; \ GPIO_InitStruct.Pull = GPIO_NOPULL; \ GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; \ HAL_GPIO_Init(port, &GPIO_InitStruct); \ } \ static GPIO_PinState IsSet() { \ return HAL_GPIO_ReadPin(port, pin); \ } \ }; MAKE_PIN(P0, GPIOA, GPIO_PIN_3); // D0 MAKE_PIN(P1, GPIOA, GPIO_PIN_2); // D1 MAKE_PIN(P2, GPIOA, GPIO_PIN_10); // D2 MAKE_PIN(P3, GPIOB, GPIO_PIN_3); // D3 MAKE_PIN(P4, GPIOB, GPIO_PIN_5); // D4 MAKE_PIN(P5, GPIOB, GPIO_PIN_4); // D5 MAKE_PIN(P6, GPIOB, GPIO_PIN_10); // D6 MAKE_PIN(P7, GPIOA, GPIO_PIN_8); // D7 MAKE_PIN(P8, GPIOA, GPIO_PIN_9); // D8 MAKE_PIN(P9, GPIOC, GPIO_PIN_7); // D9 MAKE_PIN(P10, GPIOB, GPIO_PIN_6); // D10 MAKE_PIN(P11, GPIOA, GPIO_PIN_7); // D11 MAKE_PIN(P12, GPIOA, GPIO_PIN_6); // D12 MAKE_PIN(P13, GPIOA, GPIO_PIN_5); // D13 MAKE_PIN(P14, GPIOA, GPIO_PIN_0); // A0 MAKE_PIN(P15, GPIOA, GPIO_PIN_1); // A1 MAKE_PIN(P16, GPIOA, GPIO_PIN_4); // A2 MAKE_PIN(P17, GPIOB, GPIO_PIN_0); // A3 MAKE_PIN(P18, GPIOC, GPIO_PIN_1); // A4 MAKE_PIN(P19, GPIOC, GPIO_PIN_0); // A5 #undef MAKE_PIN #else #error "Please define board in avrpins.h" #endif #elif defined(__ARDUINO_ARC__) #include // Pointers are 32 bits on arc #define pgm_read_pointer(p) pgm_read_dword(p) #define MAKE_PIN(className, pin) \ class className { \ public: \ static void Set() { \ digitalWrite(pin, HIGH);\ } \ static void Clear() { \ digitalWrite(pin, LOW); \ } \ static void SetDirRead() { \ pinMode(pin, INPUT); \ } \ static void SetDirWrite() { \ pinMode(pin, OUTPUT); \ } \ static uint8_t IsSet() { \ return digitalRead(pin); \ } \ }; MAKE_PIN(P0, 0); MAKE_PIN(P1, 1); MAKE_PIN(P2, 2); MAKE_PIN(P3, 3); //PWM MAKE_PIN(P4, 4); MAKE_PIN(P5, 5); //PWM MAKE_PIN(P6, 6); //PWM MAKE_PIN(P7, 7); MAKE_PIN(P8, 8); MAKE_PIN(P9, 9); //PWM MAKE_PIN(P10, 10); //SPI SS MAKE_PIN(P11, 11); //SPI MOSI MAKE_PIN(P12, 12); //SPI MISO MAKE_PIN(P13, 13); //SPI SCK / BUILTIN LED MAKE_PIN(P14, 14); // A0 MAKE_PIN(P15, 15); // A1 MAKE_PIN(P16, 16); // A2 MAKE_PIN(P17, 17); // A3 MAKE_PIN(P18, 18); // A4 SDA MAKE_PIN(P19, 19); // A5 SCL MAKE_PIN(P20, 20); // ATN #undef MAKE_PIN #elif defined(__ARDUINO_X86__) // Intel Galileo, Intel Galileo 2 and Intel Edison #include // Pointers are 32 bits on x86 #define pgm_read_pointer(p) pgm_read_dword(p) #if PLATFORM_ID == 0xE1 // Edison platform id #define pinToFastPin(pin) 1 // As far as I can tell all pins can be used as fast pins #endif // Pin 2 and 3 on the Intel Galileo supports a higher rate, // so it is recommended to use one of these as the SS pin. #define MAKE_PIN(className, pin) \ class className { \ public: \ static void Set() { \ fastDigitalWrite(pin, HIGH); \ } \ static void Clear() { \ fastDigitalWrite(pin, LOW); \ } \ static void SetDirRead() { \ if (pinToFastPin(pin)) \ pinMode(pin, INPUT_FAST); \ else \ pinMode(pin, INPUT); \ } \ static void SetDirWrite() { \ if (pinToFastPin(pin)) \ pinMode(pin, OUTPUT_FAST); \ else \ pinMode(pin, OUTPUT); \ } \ static uint8_t IsSet() { \ return fastDigitalRead(pin); \ } \ }; MAKE_PIN(P0, 0); MAKE_PIN(P1, 1); MAKE_PIN(P2, 2); MAKE_PIN(P3, 3); MAKE_PIN(P4, 4); MAKE_PIN(P5, 5); MAKE_PIN(P6, 6); MAKE_PIN(P7, 7); MAKE_PIN(P8, 8); MAKE_PIN(P9, 9); MAKE_PIN(P10, 10); MAKE_PIN(P11, 11); MAKE_PIN(P12, 12); MAKE_PIN(P13, 13); MAKE_PIN(P14, 14); // A0 MAKE_PIN(P15, 15); // A1 MAKE_PIN(P16, 16); // A2 MAKE_PIN(P17, 17); // A3 MAKE_PIN(P18, 18); // A4 MAKE_PIN(P19, 19); // A5 #undef MAKE_PIN #elif defined(__MIPSEL__) // MIPSEL (MIPS architecture using a little endian byte order) // MIPS size_t = 4 #define pgm_read_pointer(p) pgm_read_dword(p) #define MAKE_PIN(className, pin) \ class className { \ public: \ static void Set() { \ digitalWrite(pin, HIGH);\ } \ static void Clear() { \ digitalWrite(pin, LOW); \ } \ static void SetDirRead() { \ pinMode(pin, INPUT); \ } \ static void SetDirWrite() { \ pinMode(pin, OUTPUT); \ } \ static uint8_t IsSet() { \ return digitalRead(pin); \ } \ }; // 0 .. 13 - Digital pins MAKE_PIN(P0, 0); // RX MAKE_PIN(P1, 1); // TX MAKE_PIN(P2, 2); // MAKE_PIN(P3, 3); // MAKE_PIN(P4, 4); // MAKE_PIN(P5, 5); // MAKE_PIN(P6, 6); // MAKE_PIN(P7, 7); // MAKE_PIN(P8, 8); // MAKE_PIN(P9, 9); // MAKE_PIN(P10, 10); // MAKE_PIN(P11, 11); // MAKE_PIN(P12, 12); // MAKE_PIN(P13, 13); // #undef MAKE_PIN #else #error "Please define board in avrpins.h" #endif #endif //_avrpins_h_