/* Copyright (C) 2012 Kristian Lauszus, TKJ Electronics. All rights reserved. This software may be distributed and modified under the terms of the GNU General Public License version 2 (GPL2) as published by the Free Software Foundation and appearing in the file GPL2.TXT included in the packaging of this file. Please note that GPL2 Section 2[b] requires that all works based on this software must also be made publicly available under the terms of the GPL2 ("Copyleft"). Contact information ------------------- Kristian Lauszus, TKJ Electronics Web : http://www.tkjelectronics.com e-mail : kristianl@tkjelectronics.com */ #ifndef _wii_h_ #define _wii_h_ #include "BTD.h" /* Bluetooth L2CAP states for L2CAP_task() */ #define L2CAP_WAIT 0 #define L2CAP_CONTROL_CONNECT_REQUEST 1 #define L2CAP_CONTROL_CONFIG_REQUEST 2 #define L2CAP_INTERRUPT_CONNECT_REQUEST 3 #define L2CAP_INTERRUPT_CONFIG_REQUEST 4 #define L2CAP_CHECK_MOTION_PLUS_STATE 5 #define L2CAP_CHECK_EXTENSION_STATE 6 #define L2CAP_INIT_MOTION_PLUS_STATE 7 #define L2CAP_LED_STATE 8 #define L2CAP_DONE 9 #define L2CAP_INTERRUPT_DISCONNECT 10 #define L2CAP_CONTROL_DISCONNECT 11 /* L2CAP event flags */ #define L2CAP_FLAG_CONTROL_CONNECTED 0x001 #define L2CAP_FLAG_INTERRUPT_CONNECTED 0x002 #define L2CAP_FLAG_CONFIG_CONTROL_SUCCESS 0x004 #define L2CAP_FLAG_CONFIG_INTERRUPT_SUCCESS 0x008 #define L2CAP_FLAG_DISCONNECT_CONTROL_RESPONSE 0x040 #define L2CAP_FLAG_DISCONNECT_INTERRUPT_RESPONSE 0x080 /* Macros for L2CAP event flag tests */ #define l2cap_connected_control_flag (l2cap_event_flag & L2CAP_FLAG_CONTROL_CONNECTED) #define l2cap_connected_interrupt_flag (l2cap_event_flag & L2CAP_FLAG_INTERRUPT_CONNECTED) #define l2cap_config_success_control_flag (l2cap_event_flag & L2CAP_FLAG_CONFIG_CONTROL_SUCCESS) #define l2cap_config_success_interrupt_flag (l2cap_event_flag & L2CAP_FLAG_CONFIG_INTERRUPT_SUCCESS) #define l2cap_disconnect_response_control_flag (l2cap_event_flag & L2CAP_FLAG_DISCONNECT_CONTROL_RESPONSE) #define l2cap_disconnect_response_interrupt_flag (l2cap_event_flag & L2CAP_FLAG_DISCONNECT_INTERRUPT_RESPONSE) /* Wii event flags */ #define WII_FLAG_MOTION_PLUS_CONNECTED 0x100 #define WII_FLAG_NUNCHUCK_CONNECTED 0x200 #define motion_plus_connected_flag (l2cap_event_flag & WII_FLAG_MOTION_PLUS_CONNECTED) #define nunchuck_connected_flag (l2cap_event_flag & WII_FLAG_NUNCHUCK_CONNECTED) enum LED { LED1 = 0x10, LED2 = 0x20, LED3 = 0x40, LED4 = 0x80, LED5 = 0x90, LED6 = 0xA0, LED7 = 0xC0, LED8 = 0xD0, LED9 = 0xE0, LED10 = 0xF0, }; enum Button { LEFT = 0x00001, RIGHT = 0x00002, DOWN = 0x00004, UP = 0x00008, PLUS = 0x00010, TWO = 0x00100, ONE = 0x00200, B = 0x00400, A = 0x00800, MINUS = 0x01000, HOME = 0x08000, Z = 0x10000, C = 0x20000, }; enum AnalogHat { HatX = 0, HatY = 1, }; class WII : public BluetoothService { public: WII(BTD *pBtd, uint8_t btadr5=0, uint8_t btadr4=0, uint8_t btadr3=0, uint8_t btadr2=0, uint8_t btadr1=0, uint8_t btadr0=0); // BluetoothService implementation virtual void ACLData(uint8_t* ACLData); // Used to pass acldata to the services virtual void Run(); // Used to run part of the state maschine virtual void Reset(); // Use this to reset the service virtual void disconnect(); // Use this void to disconnect any of the controllers bool getButtonPress(Button b); // This will read true as long as the button is held down bool getButtonClick(Button b); // This will only be true when the button is clicked the first time uint8_t getAnalogHat(AnalogHat a); // Used to read the joystick of the Nunchuck double getPitch() { return pitch; }; // Fusioned angle using a complimentary filter if the Motion Plus is connected double getRoll() { return roll; }; // Fusioned angle using a complimentary filter if the Motion Plus is connected double getYaw() { return gyroYaw; }; // This is the yaw calculated by the gyro void setAllOff(); // Turn both rumble and all LEDs off void setRumbleOff(); void setRumbleOn(); void setRumbleToggle(); void setLedOff(LED a); void setLedOn(LED a); void setLedToggle(LED a); bool wiimoteConnected; // Variable used to indicate if a Wiimote is connected bool nunchuckConnected; // Variable used to indicate if a Nunchuck controller is connected bool motionPlusConnected; // Variable used to indicate if a Nunchuck controller is connected /* IMU Data, might be usefull if you need to do something more advanced than just calculating the angle */ double wiiMotePitch; // Pitch and roll calculated from the accelerometer inside the Wiimote double wiiMoteRoll; double nunchuckPitch; // Pitch and roll calculated from the accelerometer inside the Nunchuck double nunchuckRoll; int16_t accX; // Accelerometer values used to calculate pitch and roll int16_t accY; int16_t accZ; /* Variables for the gyro inside the Motion Plus */ double gyroPitch; // This is the pitch calculated by the gyro - use this to tune pitchGyroScale double gyroRoll; // This is the roll calculated by the gyro - use this to tune rollGyroScale double gyroYaw; // This is the yaw calculated by the gyro - use this to tune yawGyroScale double pitchGyroSpeed; // The speed in deg/s from the gyro double rollGyroSpeed; double yawGyroSpeed; uint16_t pitchGyroScale; // You might need to fine-tune these values uint16_t rollGyroScale; uint16_t yawGyroScale; int16_t gyroYawRaw; // Raw value read directly from the Motion Plus int16_t gyroRollRaw; int16_t gyroPitchRaw; int16_t gyroYawZero; // These values are set when the controller is first initialized int16_t gyroRollZero; int16_t gyroPitchZero; private: /* Mandatory members */ BTD *pBtd; void L2CAP_task(); // L2CAP state machine /* Variables filled from HCI event management */ uint16_t hci_handle; /* variables used by high level L2CAP task */ uint8_t l2cap_state; uint16_t l2cap_event_flag;// l2cap flags of received bluetooth events uint32_t ButtonState; uint32_t OldButtonState; uint32_t ButtonClickState; uint8_t hatValues[2]; uint8_t HIDBuffer[3];// Used to store HID commands uint8_t rumbleBit; uint16_t stateCounter; bool unknownExtensionConnected; bool extensionConnected; /* L2CAP Channels */ uint8_t control_scid[2]; // L2CAP source CID for HID_Control uint8_t control_dcid[2]; // 0x0060 uint8_t interrupt_scid[2]; // L2CAP source CID for HID_Interrupt uint8_t interrupt_dcid[2]; // 0x0061 uint8_t identifier; // Identifier for connection /* HID Commands */ void HID_Command(uint8_t* data, uint8_t nbytes); void setReportMode(bool continuous, uint8_t mode); void statusRequest(); void writeData(uint32_t offset, uint8_t size, uint8_t* data); void initExtension1(); void initExtension2(); void readData(uint32_t offset, uint16_t size, bool EEPROM); void readExtensionType(); void readCalData(); void checkMotionPresent(); // Used to see if a Motion Plus is connected to the Wiimote void initMotionPlus(); void activateMotionPlus(); double pitch; // Fusioned angle using a complimentary filter if the Motion Plus is connected double roll; // Fusioned angle using a complimentary filter if the Motion Plus is connected bool activateNunchuck; bool motionValuesReset; // This bool is true when the gyro values has been reset unsigned long timer; }; #endif