settings.h

Go to the documentation of this file.

/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
 
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
 
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.
 
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 
Contact information
-------------------
 
Circuits At Home, LTD
Web      :  http://www.circuitsathome.com
e-mail   :  support@circuitsathome.com
 */
 
#ifndef USB_HOST_SHIELD_SETTINGS_H
#define USB_HOST_SHIELD_SETTINGS_H
#include "macros.h"
 
// SPI Configuration
#ifndef USB_SPI
#define USB_SPI SPI
//#define USB_SPI SPI1
#endif
 
// DEBUGGING
 
/* Set this to 1 to activate serial debugging */
#define ENABLE_UHS_DEBUGGING 0
 
/* This can be used to select which serial port to use for debugging if
 * multiple serial ports are available.
 * For example Serial3.
 */
#ifndef USB_HOST_SERIAL
#define USB_HOST_SERIAL Serial
#endif
 
// Manual board activation
 
/* Set this to 1 if you are using an Arduino Mega ADK board with MAX3421e built-in */
#define USE_UHS_MEGA_ADK 0 // If you are using Arduino 1.5.5 or newer there is no need to do this manually
 
/* Set this to 1 if you are using a Black Widdow */
#define USE_UHS_BLACK_WIDDOW 0
 
/* Set this to a one to use the xmem2 lock. This is needed for multitasking and threading */
#define USE_XMEM_SPI_LOCK 0
 
// Wii IR camera
 
/* Set this to 1 to activate code for the Wii IR camera */
#define ENABLE_WII_IR_CAMERA 0
 
// MASS STORAGE
// <<<<<<<<<<<<<<<< IMPORTANT >>>>>>>>>>>>>>>
// Set this to 1 to support single LUN devices, and save RAM. -- I.E. thumb drives.
// Each LUN needs ~13 bytes to be able to track the state of each unit.
#ifndef MASS_MAX_SUPPORTED_LUN
#define MASS_MAX_SUPPORTED_LUN 8
#endif
 
// Set to 1 to use the faster spi4teensy3 driver on Teensy 3.x
#ifndef USE_SPI4TEENSY3
#if defined(CORE_TEENSY) && (defined(__MK20DX128__) || defined(__MK20DX256__) || defined(__MK64FX512__) || defined(__MK66FX1M0__))
#define USE_SPI4TEENSY3 1
#else
#define USE_SPI4TEENSY3 0
#endif
#endif
 
// AUTOMATIC Settings
 
// No user serviceable parts below this line.
// DO NOT change anything below here unless you are a developer!
 
#include "version_helper.h"
 
#if defined(__GNUC__) && defined(__AVR__)
#ifndef GCC_VERSION
#define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__)
#endif
#if GCC_VERSION < 40602 // Test for GCC < 4.6.2
#ifdef PROGMEM
#undef PROGMEM
#define PROGMEM __attribute__((section(".progmem.data"))) // Workaround for http://gcc.gnu.org/bugzilla/show_bug.cgi?id=34734#c4
#ifdef PSTR
#undef PSTR
#define PSTR(s) (__extension__({static const char __c[] PROGMEM = (s); &__c[0];})) // Copied from pgmspace.h in avr-libc source
#endif
#endif
#endif
#endif
 
#if !defined(DEBUG_USB_HOST) && ENABLE_UHS_DEBUGGING
#define DEBUG_USB_HOST
#endif
 
#if !defined(WIICAMERA) && ENABLE_WII_IR_CAMERA
#define WIICAMERA
#endif
 
// To use some other locking (e.g. freertos),
// define XMEM_ACQUIRE_SPI and XMEM_RELEASE_SPI to point to your lock and unlock.
// NOTE: NO argument is passed. You have to do this within your routine for
// whatever you are using to lock and unlock.
#if !defined(XMEM_ACQUIRE_SPI)
#if USE_XMEM_SPI_LOCK || defined(USE_MULTIPLE_APP_API)
#include <xmem.h>
#else
#define XMEM_ACQUIRE_SPI() (void(0))
#define XMEM_RELEASE_SPI() (void(0))
#endif
#endif
 
#if !defined(EXT_RAM) && defined(EXT_RAM_STACK) || defined(EXT_RAM_HEAP)
#include <xmem.h>
#else
#define EXT_RAM 0
#endif
 
#if defined(CORE_TEENSY) && defined(KINETISK)
#define USING_SPI4TEENSY3 USE_SPI4TEENSY3
#else
#define USING_SPI4TEENSY3 0
#endif
 
#if ((defined(ARDUINO_SAM_DUE) && defined(__SAM3X8E__)) || defined(__ARDUINO_X86__) || ARDUINO >= 10600) && !USING_SPI4TEENSY3
#include <SPI.h> // Use the Arduino SPI library for the Arduino Due, Intel Galileo 1 & 2, Intel Edison or if the SPI library with transaction is available
#endif
#ifdef RBL_NRF51822
#include <nrf_gpio.h>
#include <SPI_Master.h>
#define SPI SPI_Master
#define MFK_CASTUINT8T (uint8_t) // RBLs return type for sizeof needs casting to uint8_t
#endif
#ifdef NRF52_SERIES
#include <SPI.h> 
#include <nrf_gpio.h>
#define MFK_CASTUINT8T (uint8_t) // NRF return type for sizeof needs casting to uint8_t
#endif
#if defined(__PIC32MX__) || defined(__PIC32MZ__)
#include <../../../../hardware/pic32/libraries/SPI/SPI.h> // Hack to use the SPI library
#endif
 
#if defined(ESP8266) || defined(ESP32)
#define MFK_CASTUINT8T (uint8_t) // ESP return type for sizeof needs casting to uint8_t
#endif
 
#ifdef STM32F4
#include "stm32f4xx_hal.h"
extern SPI_HandleTypeDef SPI_Handle; // Needed to be declared in your main.cpp
#endif
 
// Fix defines on Arduino Due
#ifdef ARDUINO_SAM_DUE
#ifdef tokSETUP
#undef tokSETUP
#endif
#ifdef tokIN
#undef tokIN
#endif
#ifdef tokOUT
#undef tokOUT
#endif
#ifdef tokINHS
#undef tokINHS
#endif
#ifdef tokOUTHS
#undef tokOUTHS
#endif
#endif
 
// Set defaults
#ifndef MFK_CASTUINT8T
#define MFK_CASTUINT8T
#endif
 
// Workaround issue: https://github.com/esp8266/Arduino/issues/2078
#ifdef ESP8266
#undef PROGMEM
#define PROGMEM
#undef PSTR
#define PSTR(s) (s)
#undef pgm_read_byte
#define pgm_read_byte(addr) (*reinterpret_cast<const uint8_t*>(addr))
#undef pgm_read_word
#define pgm_read_word(addr) (*reinterpret_cast<const uint16_t*>(addr))
#endif
 
#ifdef ARDUINO_ESP8266_WIFIO
#error "This board is currently not supported"
#endif
 
#endif /* SETTINGS_H */