USB_Host_Shield_2.0/examples/HID/USBHIDBootKbdAndMouse/USBHIDBootKbdAndMouse.ino

#include <hidboot.h>
#include <usbhub.h>

// Satisfy IDE, which only needs to see the include statment in the ino.
#ifdef dobogusinclude
#include <spi4teensy3.h>
#include <SPI.h>
#endif

class MouseRptParser : public MouseReportParser
{
  protected:
    void OnMouseMove(MOUSEINFO *mi);
    void OnLeftButtonUp(MOUSEINFO *mi);
    void OnLeftButtonDown(MOUSEINFO *mi);
    void OnRightButtonUp(MOUSEINFO *mi);
    void OnRightButtonDown(MOUSEINFO *mi);
    void OnMiddleButtonUp(MOUSEINFO *mi);
    void OnMiddleButtonDown(MOUSEINFO *mi);
};
void MouseRptParser::OnMouseMove(MOUSEINFO *mi)
{
  Serial.print("dx=");
  Serial.print(mi->dX, DEC);
  Serial.print(" dy=");
  Serial.println(mi->dY, DEC);
};
void MouseRptParser::OnLeftButtonUp	(MOUSEINFO *mi)
{
  Serial.println("L Butt Up");
};
void MouseRptParser::OnLeftButtonDown	(MOUSEINFO *mi)
{
  Serial.println("L Butt Dn");
};
void MouseRptParser::OnRightButtonUp	(MOUSEINFO *mi)
{
  Serial.println("R Butt Up");
};
void MouseRptParser::OnRightButtonDown	(MOUSEINFO *mi)
{
  Serial.println("R Butt Dn");
};
void MouseRptParser::OnMiddleButtonUp	(MOUSEINFO *mi)
{
  Serial.println("M Butt Up");
};
void MouseRptParser::OnMiddleButtonDown	(MOUSEINFO *mi)
{
  Serial.println("M Butt Dn");
};

class KbdRptParser : public KeyboardReportParser
{
    void PrintKey(uint8_t mod, uint8_t key);

  protected:
    void OnControlKeysChanged(uint8_t before, uint8_t after);
    void OnKeyDown	(uint8_t mod, uint8_t key);
    void OnKeyUp	(uint8_t mod, uint8_t key);
    void OnKeyPressed(uint8_t key);
};

void KbdRptParser::PrintKey(uint8_t m, uint8_t key)
{
  MODIFIERKEYS mod;
  *((uint8_t*)&mod) = m;
  Serial.print((mod.bmLeftCtrl   == 1) ? "C" : " ");
  Serial.print((mod.bmLeftShift  == 1) ? "S" : " ");
  Serial.print((mod.bmLeftAlt    == 1) ? "A" : " ");
  Serial.print((mod.bmLeftGUI    == 1) ? "G" : " ");

  Serial.print(" >");
  PrintHex<uint8_t>(key, 0x80);
  Serial.print("< ");

  Serial.print((mod.bmRightCtrl   == 1) ? "C" : " ");
  Serial.print((mod.bmRightShift  == 1) ? "S" : " ");
  Serial.print((mod.bmRightAlt    == 1) ? "A" : " ");
  Serial.println((mod.bmRightGUI    == 1) ? "G" : " ");
};

void KbdRptParser::OnKeyDown(uint8_t mod, uint8_t key)
{
  Serial.print("DN ");
  PrintKey(mod, key);
  uint8_t c = OemToAscii(mod, key);

  if (c)
    OnKeyPressed(c);
}

void KbdRptParser::OnControlKeysChanged(uint8_t before, uint8_t after) {

  MODIFIERKEYS beforeMod;
  *((uint8_t*)&beforeMod) = before;

  MODIFIERKEYS afterMod;
  *((uint8_t*)&afterMod) = after;

  if (beforeMod.bmLeftCtrl != afterMod.bmLeftCtrl) {
    Serial.println("LeftCtrl changed");
  }
  if (beforeMod.bmLeftShift != afterMod.bmLeftShift) {
    Serial.println("LeftShift changed");
  }
  if (beforeMod.bmLeftAlt != afterMod.bmLeftAlt) {
    Serial.println("LeftAlt changed");
  }
  if (beforeMod.bmLeftGUI != afterMod.bmLeftGUI) {
    Serial.println("LeftGUI changed");
  }

  if (beforeMod.bmRightCtrl != afterMod.bmRightCtrl) {
    Serial.println("RightCtrl changed");
  }
  if (beforeMod.bmRightShift != afterMod.bmRightShift) {
    Serial.println("RightShift changed");
  }
  if (beforeMod.bmRightAlt != afterMod.bmRightAlt) {
    Serial.println("RightAlt changed");
  }
  if (beforeMod.bmRightGUI != afterMod.bmRightGUI) {
    Serial.println("RightGUI changed");
  }

}

void KbdRptParser::OnKeyUp(uint8_t mod, uint8_t key)
{
  Serial.print("UP ");
  PrintKey(mod, key);
}

void KbdRptParser::OnKeyPressed(uint8_t key)
{
  Serial.print("ASCII: ");
  Serial.println((char)key);
};

USB     Usb;
USBHub     Hub(&Usb);

HIDBoot < HID_PROTOCOL_KEYBOARD | HID_PROTOCOL_MOUSE > HidComposite(&Usb);
HIDBoot<HID_PROTOCOL_KEYBOARD>    HidKeyboard(&Usb);
HIDBoot<HID_PROTOCOL_MOUSE>    HidMouse(&Usb);

//uint32_t next_time;

KbdRptParser KbdPrs;
MouseRptParser MousePrs;

void setup()
{
  Serial.begin( 115200 );
#if !defined(__MIPSEL__)
  while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
#endif
  Serial.println("Start");

  if (Usb.Init() == -1)
    Serial.println("OSC did not start.");

  delay( 200 );

  //next_time = millis() + 5000;

  HidComposite.SetReportParser(0, (HIDReportParser*)&KbdPrs);
  HidComposite.SetReportParser(1, (HIDReportParser*)&MousePrs);
  HidKeyboard.SetReportParser(0, (HIDReportParser*)&KbdPrs);
  HidMouse.SetReportParser(0, (HIDReportParser*)&MousePrs);
}

void loop()
{
  Usb.Task();
}