USB_Host_Shield_2.0/avrpins.h
2013-03-30 17:05:30 +01:00

741 lines
No EOL
17 KiB
C++

/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
/* derived from Konstantin Chizhov's AVR port templates */
#ifndef _avrpins_h_
#define _avrpins_h_
#if defined(__AVR_ATmega1280__) || (__AVR_ATmega2560__)
/* Uncomment the following if you have Arduino Mega ADK board with MAX3421e built-in */
//#define BOARD_MEGA_ADK
#endif
/* Uncomment the following if you are using a Teensy 2.0 */
//#define BOARD_TEENSY
/* Uncomment the following if you are using a Sanguino */
//#define BOARD_SANGUINO
#include <avr/io.h>
#ifdef PORTA
#define USE_PORTA
#endif
#ifdef PORTB
#define USE_PORTB
#endif
#ifdef PORTC
#define USE_PORTC
#endif
#ifdef PORTD
#define USE_PORTD
#endif
#ifdef PORTE
#define USE_PORTE
#endif
#ifdef PORTF
#define USE_PORTF
#endif
#ifdef PORTG
#define USE_PORTG
#endif
#ifdef PORTH
#define USE_PORTH
#endif
#ifdef PORTJ
#define USE_PORTJ
#endif
#ifdef PORTK
#define USE_PORTK
#endif
#ifdef PORTL
#define USE_PORTL
#endif
#ifdef PORTQ
#define USE_PORTQ
#endif
#ifdef PORTR
#define USE_PORTR
#endif
#ifdef TCCR0A
#define USE_TCCR0A
#endif
#ifdef TCCR1A
#define USE_TCCR1A
#endif
#ifdef TCCR2A
#define USE_TCCR2A
#endif
//Port definitions for AtTiny, AtMega families.
#define MAKE_PORT(portName, ddrName, pinName, className, ID) \
class className{\
public:\
typedef uint8_t DataT;\
public:\
static void Write(DataT value){portName = value;}\
static void ClearAndSet(DataT clearMask, DataT value){portName = (portName & ~clearMask) | value;}\
static DataT Read(){return portName;}\
static void DirWrite(DataT value){ddrName = value;}\
static DataT DirRead(){return ddrName;}\
static void Set(DataT value){portName |= value;}\
static void Clear(DataT value){portName &= ~value;}\
static void Toggle(DataT value){portName ^= value;}\
static void DirSet(DataT value){ddrName |= value;}\
static void DirClear(DataT value){ddrName &= ~value;}\
static void DirToggle(DataT value){ddrName ^= value;}\
static DataT PinRead(){return pinName;}\
enum{Id = ID};\
enum{Width=sizeof(DataT)*8};\
};
// TCCR registers to set/clear Arduino PWM
#define MAKE_TCCR(TccrName, className) \
class className{\
public:\
typedef uint8_t DataT;\
public:\
static void Write(DataT value){TccrName = value;}\
static void ClearAndSet(DataT clearMask, DataT value){TccrName = (TccrName & ~clearMask) | value;}\
static DataT Read(){return TccrName;}\
static void Set(DataT value){TccrName |= value;}\
static void Clear(DataT value){TccrName &= ~value;}\
static void Toggle(DataT value){TccrName ^= value;}\
enum{Width=sizeof(DataT)*8};\
};
#ifdef USE_PORTA
MAKE_PORT(PORTA, DDRA, PINA, Porta, 'A')
#endif
#ifdef USE_PORTB
MAKE_PORT(PORTB, DDRB, PINB, Portb, 'B')
#endif
#ifdef USE_PORTC
MAKE_PORT(PORTC, DDRC, PINC, Portc, 'C')
#endif
#ifdef USE_PORTD
MAKE_PORT(PORTD, DDRD, PIND, Portd, 'D')
#endif
#ifdef USE_PORTE
MAKE_PORT(PORTE, DDRE, PINE, Porte, 'E')
#endif
#ifdef USE_PORTF
MAKE_PORT(PORTF, DDRF, PINF, Portf, 'F')
#endif
#ifdef USE_PORTG
MAKE_PORT(PORTG, DDRG, PING, Portg, 'G')
#endif
#ifdef USE_PORTH
MAKE_PORT(PORTH, DDRH, PINH, Porth, 'H')
#endif
#ifdef USE_PORTJ
MAKE_PORT(PORTJ, DDRJ, PINJ, Portj, 'J')
#endif
#ifdef USE_PORTK
MAKE_PORT(PORTK, DDRK, PINK, Portk, 'K')
#endif
#ifdef USE_PORTL
MAKE_PORT(PORTL, DDRL, PINL, Portl, 'L')
#endif
#ifdef USE_PORTQ
MAKE_PORT(PORTQ, DDRQ, PINQ, Portq, 'Q')
#endif
#ifdef USE_PORTR
MAKE_PORT(PORTR, DDRR, PINR, Portr, 'R')
#endif
#ifdef USE_TCCR0A
MAKE_TCCR(TCCR0A, Tccr0a)
#endif
#ifdef USE_TCCR1A
MAKE_TCCR(TCCR1A, Tccr1a)
#endif
#ifdef USE_TCCR2A
MAKE_TCCR(TCCR2A, Tccr2a)
#endif
// this class represents one pin in a IO port.
// It is fully static.
template<typename PORT, uint8_t PIN>
class TPin {
// BOOST_STATIC_ASSERT(PIN < PORT::Width);
public:
typedef PORT Port;
enum {
Number = PIN
};
static void Set() {
PORT::Set(1 << PIN);
}
static void Set(uint8_t val) {
if(val)
Set();
else Clear();
}
static void SetDir(uint8_t val) {
if(val)
SetDirWrite();
else SetDirRead();
}
static void Clear() {
PORT::Clear(1 << PIN);
}
static void Toggle() {
PORT::Toggle(1 << PIN);
}
static void SetDirRead() {
PORT::DirClear(1 << PIN);
}
static void SetDirWrite() {
PORT::DirSet(1 << PIN);
}
static uint8_t IsSet() {
return PORT::PinRead() & (uint8_t) (1 << PIN);
}
static void WaiteForSet() {
while(IsSet() == 0) {
}
}
static void WaiteForClear() {
while(IsSet()) {
}
}
}; //class TPin...
// this class represents one bit in TCCR port.
// used to set/clear TCCRx bits
// It is fully static.
template<typename TCCR, uint8_t COM>
class TCom {
// BOOST_STATIC_ASSERT(PIN < PORT::Width);
public:
typedef TCCR Tccr;
enum {
Com = COM
};
static void Set() {
TCCR::Set(1 << COM);
}
static void Clear() {
TCCR::Clear(1 << COM);
}
static void Toggle() {
TCCR::Toggle(1 << COM);
}
}; //class TCom...
//Short pin definitions
#ifdef USE_PORTA
typedef TPin<Porta, 0 > Pa0;
typedef TPin<Porta, 1 > Pa1;
typedef TPin<Porta, 2 > Pa2;
typedef TPin<Porta, 3 > Pa3;
typedef TPin<Porta, 4 > Pa4;
typedef TPin<Porta, 5 > Pa5;
typedef TPin<Porta, 6 > Pa6;
typedef TPin<Porta, 7 > Pa7;
#endif
#ifdef USE_PORTB
typedef TPin<Portb, 0 > Pb0;
typedef TPin<Portb, 1 > Pb1;
typedef TPin<Portb, 2 > Pb2;
typedef TPin<Portb, 3 > Pb3;
typedef TPin<Portb, 4 > Pb4;
typedef TPin<Portb, 5 > Pb5;
typedef TPin<Portb, 6 > Pb6;
typedef TPin<Portb, 7 > Pb7;
#endif
#ifdef USE_PORTC
typedef TPin<Portc, 0 > Pc0;
typedef TPin<Portc, 1 > Pc1;
typedef TPin<Portc, 2 > Pc2;
typedef TPin<Portc, 3 > Pc3;
typedef TPin<Portc, 4 > Pc4;
typedef TPin<Portc, 5 > Pc5;
typedef TPin<Portc, 6 > Pc6;
typedef TPin<Portc, 7 > Pc7;
#endif
#ifdef USE_PORTD
typedef TPin<Portd, 0 > Pd0;
typedef TPin<Portd, 1 > Pd1;
typedef TPin<Portd, 2 > Pd2;
typedef TPin<Portd, 3 > Pd3;
typedef TPin<Portd, 4 > Pd4;
typedef TPin<Portd, 5 > Pd5;
typedef TPin<Portd, 6 > Pd6;
typedef TPin<Portd, 7 > Pd7;
#endif
#ifdef USE_PORTE
typedef TPin<Porte, 0 > Pe0;
typedef TPin<Porte, 1 > Pe1;
typedef TPin<Porte, 2 > Pe2;
typedef TPin<Porte, 3 > Pe3;
typedef TPin<Porte, 4 > Pe4;
typedef TPin<Porte, 5 > Pe5;
typedef TPin<Porte, 6 > Pe6;
typedef TPin<Porte, 7 > Pe7;
#endif
#ifdef USE_PORTF
typedef TPin<Portf, 0 > Pf0;
typedef TPin<Portf, 1 > Pf1;
typedef TPin<Portf, 2 > Pf2;
typedef TPin<Portf, 3 > Pf3;
typedef TPin<Portf, 4 > Pf4;
typedef TPin<Portf, 5 > Pf5;
typedef TPin<Portf, 6 > Pf6;
typedef TPin<Portf, 7 > Pf7;
#endif
#ifdef USE_PORTG
typedef TPin<Portg, 0 > Pg0;
typedef TPin<Portg, 1 > Pg1;
typedef TPin<Portg, 2 > Pg2;
typedef TPin<Portg, 3 > Pg3;
typedef TPin<Portg, 4 > Pg4;
typedef TPin<Portg, 5 > Pg5;
typedef TPin<Portg, 6 > Pg6;
typedef TPin<Portg, 7 > Pg7;
#endif
#ifdef USE_PORTH
typedef TPin<Porth, 0 > Ph0;
typedef TPin<Porth, 1 > Ph1;
typedef TPin<Porth, 2 > Ph2;
typedef TPin<Porth, 3 > Ph3;
typedef TPin<Porth, 4 > Ph4;
typedef TPin<Porth, 5 > Ph5;
typedef TPin<Porth, 6 > Ph6;
typedef TPin<Porth, 7 > Ph7;
#endif
#ifdef USE_PORTJ
typedef TPin<Portj, 0 > Pj0;
typedef TPin<Portj, 1 > Pj1;
typedef TPin<Portj, 2 > Pj2;
typedef TPin<Portj, 3 > Pj3;
typedef TPin<Portj, 4 > Pj4;
typedef TPin<Portj, 5 > Pj5;
typedef TPin<Portj, 6 > Pj6;
typedef TPin<Portj, 7 > Pj7;
#endif
#ifdef USE_PORTK
typedef TPin<Portk, 0 > Pk0;
typedef TPin<Portk, 1 > Pk1;
typedef TPin<Portk, 2 > Pk2;
typedef TPin<Portk, 3 > Pk3;
typedef TPin<Portk, 4 > Pk4;
typedef TPin<Portk, 5 > Pk5;
typedef TPin<Portk, 6 > Pk6;
typedef TPin<Portk, 7 > Pk7;
#endif
#ifdef USE_PORTL
typedef TPin<Portl, 0 > Pl0;
typedef TPin<Portl, 1 > Pl1;
typedef TPin<Portl, 2 > Pl2;
typedef TPin<Portl, 3 > Pl3;
typedef TPin<Portl, 4 > Pl4;
typedef TPin<Portl, 5 > Pl5;
typedef TPin<Portl, 6 > Pl6;
typedef TPin<Portl, 7 > Pl7;
#endif
#ifdef USE_PORTQ
typedef TPin<Portq, 0 > Pq0;
typedef TPin<Portq, 1 > Pq1;
typedef TPin<Portq, 2 > Pq2;
typedef TPin<Portq, 3 > Pq3;
typedef TPin<Portq, 4 > Pq4;
typedef TPin<Portq, 5 > Pq5;
typedef TPin<Portq, 6 > Pq6;
typedef TPin<Portq, 7 > Pq7;
#endif
#ifdef USE_PORTR
typedef TPin<Portr, 0 > Pr0;
typedef TPin<Portr, 1 > Pr1;
typedef TPin<Portr, 2 > Pr2;
typedef TPin<Portr, 3 > Pr3;
typedef TPin<Portr, 4 > Pr4;
typedef TPin<Portr, 5 > Pr5;
typedef TPin<Portr, 6 > Pr6;
typedef TPin<Portr, 7 > Pr7;
#endif
#ifdef USE_TCCR0A
typedef TCom<Tccr0a, COM0A1> Tc0a; //P6
typedef TCom<Tccr0a, COM0B1> Tc0b; //P5
#endif
#ifdef USE_TCCR1A
typedef TCom<Tccr1a, COM1A1> Tc1a; //P9
typedef TCom<Tccr1a, COM1B1> Tc1b; //P10
#endif
#ifdef USE_TCCR2A
typedef TCom<Tccr2a, COM2A1> Tc2a; //P11
typedef TCom<Tccr2a, COM2B1> Tc2b; //P3
#endif
template<typename Tp_pin, typename Tc_bit>
class Tp_Tc {
public:
static void SetDir(uint8_t val) {
if(val)
SetDirWrite();
else SetDirRead();
}
static void SetDirRead() {
Tp_pin::SetDirRead(); //set pin direction
Tc_bit::Clear(); //disconnect pin from PWM
}
static void SetDirWrite() {
Tp_pin::SetDirWrite();
Tc_bit::Clear();
}
};
/* pin definitions for cases where it's necessary to clear compare output mode bits */
//typedef Tp_Tc<Pd3, Tc2b> P3; //Arduino pin 3
//typedef Tp_Tc<Pd5, Tc0b> P5; //Arduino pin 5
//typedef Tp_Tc<Pd6, Tc0a> P6; //Arduino pin 6
//typedef Tp_Tc<Pb1, Tc1a> P9; //Arduino pin 9
//typedef Tp_Tc<Pb2, Tc1b> P10; //Arduino pin 10
//typedef Tp_Tc<Pb3, Tc2a> P11; //Arduino pin 11
/* Arduino pin definitions */
#if defined(__AVR_ATmega1280__) || (__AVR_ATmega2560__)
// "Mega" Arduino pin numbers
#define P0 Pe0
#define P1 Pe1
#define P2 Pe4
#define P3 Pe5
#define P4 Pg5
#define P5 Pe5
#define P6 Ph3
#define P7 Ph4
#define P8 Ph5
#define P9 Ph6
#define P10 Pb4
#define P11 Pb5
#define P12 Pb6
#define P13 Pb7
#define P14 Pj1
#define P15 Pj0
#define P16 Ph1
#define P17 Ph0
#define P18 Pd3
#define P19 Pd2
#define P20 Pd1
#define P21 Pd0
#define P22 Pa0
#define P23 Pa1
#define P24 Pa2
#define P25 Pa3
#define P26 Pa4
#define P27 Pa5
#define P28 Pa6
#define P29 Pa7
#define P30 Pc7
#define P31 Pc6
#define P32 Pc5
#define P33 Pc4
#define P34 Pc3
#define P35 Pc2
#define P36 Pc1
#define P37 Pc0
#define P38 Pd7
#define P39 Pg2
#define P40 Pg1
#define P41 Pg0
#define P42 Pl7
#define P43 Pl6
#define P44 Pl5
#define P45 Pl4
#define P46 Pl3
#define P47 Pl2
#define P48 Pl1
#define P49 Pl0
#define P50 Pb3
#define P51 Pb2
#define P52 Pb1
#define P53 Pb0
#define P54 Pe6 // INT on Arduino ADK
#endif //"Mega" pin numbers
#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__)
//"Classic" Arduino pin numbers
#define P0 Pd0
#define P1 Pd1
#define P2 Pd2
#define P3 Pd3
#define P4 Pd4
#define P5 Pd5
#define P6 Pd6
#define P7 Pd7
#define P8 Pb0
#define P9 Pb1
#define P10 Pb2
#define P11 Pb3
#define P12 Pb4
#define P13 Pb5
#define P14 Pc0
#define P15 Pc1
#define P16 Pc2
#define P17 Pc3
#define P18 Pc4
#define P19 Pc5
#endif // "Classic" Arduino pin numbers
#if !defined(BOARD_TEENSY) && defined(__AVR_ATmega32U4__)
// Arduino Leonardo pin numbers
#define P0 Pd2 // D0 - PD2
#define P1 Pd3 // D1 - PD3
#define P2 Pd1 // D2 - PD1
#define P3 Pd0 // D3 - PD0
#define P4 Pd4 // D4 - PD4
#define P5 Pc6 // D5 - PC6
#define P6 Pd7 // D6 - PD7
#define P7 Pe6 // D7 - PE6
#define P8 Pb4 // D8 - PB4
#define P9 Pb5 // D9 - PB5
#define P10 Pb6 // D10 - PB6
#define P11 Pb7 // D11 - PB7
#define P12 Pd6 // D12 - PD6
#define P13 Pc7 // D13 - PC7
#define P14 Pb3 // D14 - MISO - PB3
#define P15 Pb1 // D15 - SCK - PB1
#define P16 Pb2 // D16 - MOSI - PB2
#define P17 Pb0 // D17 - SS - PB0
#define P18 Pf7 // D18 - A0 - PF7
#define P19 Pf6 // D19 - A1 - PF6
#define P20 Pf5 // D20 - A2 - PF5
#define P21 Pf4 // D21 - A3 - PF4
#define P22 Pf1 // D22 - A4 - PF1
#define P23 Pf0 // D23 - A5 - PF0
#define P24 Pd4 // D24 / D4 - A6 - PD4
#define P25 Pd7 // D25 / D6 - A7 - PD7
#define P26 Pb4 // D26 / D8 - A8 - PB4
#define P27 Pb5 // D27 / D9 - A9 - PB5
#define P28 Pb6 // D28 / D10 - A10 - PB6
#define P29 Pd6 // D29 / D12 - A11 - PD6
#endif // Arduino Leonardo pin numbers
#if defined(BOARD_TEENSY) && defined(__AVR_ATmega32U4__)
// Teensy 2.0 pin numbers
// http://www.pjrc.com/teensy/pinout.html
#define P0 Pb0
#define P1 Pb1
#define P2 Pb2
#define P3 Pb3
#define P4 Pb7
#define P5 Pd0
#define P6 Pd1
#define P7 Pd2
#define P8 Pd3
#define P9 Pc6
#define P10 Pc7
#define P11 Pd6
#define P12 Pd7
#define P13 Pb4
#define P14 Pb5
#define P15 Pb6
#define P16 Pf7
#define P17 Pf6
#define P18 Pf5
#define P19 Pf4
#define P20 Pf1
#define P21 Pf0
#define P22 Pd4
#define P23 Pd5
#define P24 Pe6
#endif // Teensy 2.0
#if defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
// Teensy++ 2.0 pin numbers
// http://www.pjrc.com/teensy/pinout.html
#define P0 Pd0
#define P1 Pd1
#define P2 Pd2
#define P3 Pd3
#define P4 Pd4
#define P5 Pd5
#define P6 Pd6
#define P7 Pd7
#define P8 Pe0
#define P9 Pe1
#define P10 Pc0
#define P11 Pc1
#define P12 Pc2
#define P13 Pc3
#define P14 Pc4
#define P15 Pc5
#define P16 Pc6
#define P17 Pc7
#define P18 Pe6
#define P19 Pe7
#define P20 Pb0
#define P21 Pb1
#define P22 Pb2
#define P23 Pb3
#define P24 Pb4
#define P25 Pb5
#define P26 Pb6
#define P27 Pb7
#define P28 Pa0
#define P29 Pa1
#define P30 Pa2
#define P31 Pa3
#define P32 Pa4
#define P33 Pa5
#define P34 Pa6
#define P35 Pa7
#define P36 Pe4
#define P37 Pe5
#define P38 Pf0
#define P39 Pf1
#define P40 Pf2
#define P41 Pf3
#define P42 Pf4
#define P43 Pf5
#define P44 Pf6
#define P45 Pf7
#endif // Teensy++ 2.0
#if !defined(BOARD_SANGUINO) && (defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__))
#define BOARD_BALANDUINO
// Balanduino pin numbers
// http://balanduino.net/
#define P0 Pd0 /* 0 - PD0 */
#define P1 Pd1 /* 1 - PD1 */
#define P2 Pb2 /* 2 - PB2 */
#define P3 Pd6 /* 3 - PD6 */
#define P4 Pd7 /* 4 - PD7 */
#define P5 Pb3 /* 5 - PB3 */
#define P6 Pb4 /* 6 - PB4 */
#define P7 Pa0 /* 7 - PA0 */
#define P8 Pa1 /* 8 - PA1 */
#define P9 Pa2 /* 9 - PA2 */
#define P10 Pa3 /* 10 - PA3 */
#define P11 Pa4 /* 11 - PA4 */
#define P12 Pa5 /* 12 - PA5 */
#define P13 Pc0 /* 13 - PC0 */
#define P14 Pc1 /* 14 - PC1 */
#define P15 Pd2 /* 15 - PD2 */
#define P16 Pd3 /* 16 - PD3 */
#define P17 Pd4 /* 17 - PD4 */
#define P18 Pd5 /* 18 - PD5 */
#define P19 Pc2 /* 19 - PC2 */
#define P20 Pc3 /* 20 - PC3 */
#define P21 Pc4 /* 21 - PC4 */
#define P22 Pc5 /* 22 - PC5 */
#define P23 Pc6 /* 23 - PC6 */
#define P24 Pc7 /* 24 - PC7 */
#define P25 Pb0 /* 25 - PB0 */
#define P26 Pb1 /* 26 - PB1 */
#define P27 Pb5 /* 27 - PB5 */
#define P28 Pb6 /* 28 - PB6 */
#define P29 Pb7 /* 29 - PB7 */
#define P30 Pa6 /* 30 - PA6 */
#define P31 Pa7 /* 31 - PA7 */
#endif // Balanduino
#if defined(BOARD_SANGUINO) && (defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__))
// Sanguino pin numbers
// http://sanguino.cc/hardware
#define P0 Pb0
#define P1 Pb1
#define P2 Pb2
#define P3 Pb3
#define P4 Pb4
#define P5 Pb5
#define P6 Pb6
#define P7 Pb7
#define P8 Pd0
#define P9 Pd1
#define P10 Pd2
#define P11 Pd3
#define P12 Pd4
#define P13 Pd5
#define P14 Pd6
#define P15 Pd7
#define P16 Pc0
#define P17 Pc1
#define P18 Pc2
#define P19 Pc3
#define P20 Pc4
#define P21 Pc5
#define P22 Pc6
#define P23 Pc7
#define P24 Pa0
#define P25 Pa1
#define P26 Pa2
#define P27 Pa3
#define P28 Pa4
#define P29 Pa5
#define P30 Pa6
#define P31 Pa7
#endif // Sanguino
#endif //_avrpins_h_