specchioriflesso/USB_Host_Shield_2.0
1
Fork 0
mirror of https://github.com/felis/USB_Host_Shield_2.0.git synced 2024-03-22 11:31:26 +01:00
Code Issues Projects Releases Packages Wiki Activity
USB_Host_Shield_2.0/Usb.h

282 lines
12 KiB
C++
Raw Blame History

/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
/* USB functions */
#ifndef _usb_h_
#define _usb_h_
//#define BOARD_BLACK_WIDDOW
#define USB_METHODS_INLINE
#include <inttypes.h>
#include <assert.h>
#include "avrpins.h"
#include "max3421e.h"
#include "usbhost.h"
#include "usb_ch9.h"
#include "address.h"
#if defined(ARDUINO) && ARDUINO >=100
#include "Arduino.h"
#else
#include <WProgram.h>
#endif
#include "message.h"
/* shield pins. First parameter - SS pin, second parameter - INT pin */
#if defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
#define BOARD_TEENSY_PLUS_PLUS
#endif
#ifdef BOARD_BLACK_WIDDOW
typedef MAX3421e<P6, P3> MAX3421E; // Black Widow
#elif defined(BOARD_TEENSY_PLUS_PLUS)
typedef MAX3421e<P9, P8> MAX3421E; // Teensy++ 2.0 & 1.0
#elif defined(BOARD_MEGA_ADK)
typedef MAX3421e<P53, P54> MAX3421E; // Arduino Mega ADK
#elif defined(BOARD_BALANDUINO)
typedef MAX3421e<P20, P19> MAX3421E; // Balanduino
#else
typedef MAX3421e<P10, P9> MAX3421E; // Official Arduinos (UNO, Duemilanove, Mega, 2560, Leonardo etc.)
#endif
//Debug macros. In 1.0 it is possible to move strings to PROGMEM by defining USBTRACE (Serial.print(F(s)))
#define USBTRACE(s) (Notify(PSTR(s), 0x80))
#define USBTRACE2(s,r) (Notify(PSTR(s), 0x80), PrintHex((r), 0x80), Notify(PSTR("\r\n"), 0x80))
/* Common setup data constant combinations */
#define bmREQ_GET_DESCR USB_SETUP_DEVICE_TO_HOST|USB_SETUP_TYPE_STANDARD|USB_SETUP_RECIPIENT_DEVICE //get descriptor request type
#define bmREQ_SET USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_STANDARD|USB_SETUP_RECIPIENT_DEVICE //set request type for all but 'set feature' and 'set interface'
#define bmREQ_CL_GET_INTF USB_SETUP_DEVICE_TO_HOST|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_INTERFACE //get interface request type
// D7 data transfer direction (0 - host-to-device, 1 - device-to-host)
// D6-5 Type (0- standard, 1 - class, 2 - vendor, 3 - reserved)
// D4-0 Recipient (0 - device, 1 - interface, 2 - endpoint, 3 - other, 4..31 - reserved)
// USB Device Classes
#define USB_CLASS_USE_CLASS_INFO 0x00 // Use Class Info in the Interface Descriptors
#define USB_CLASS_AUDIO 0x01 // Audio
#define USB_CLASS_COM_AND_CDC_CTRL 0x02 // Communications and CDC Control
#define USB_CLASS_HID 0x03 // HID
#define USB_CLASS_PHYSICAL 0x05 // Physical
#define USB_CLASS_IMAGE 0x06 // Image
#define USB_CLASS_PRINTER 0x07 // Printer
#define USB_CLASS_MASS_STORAGE 0x08 // Mass Storage
#define USB_CLASS_HUB 0x09 // Hub
#define USB_CLASS_CDC_DATA 0x0a // CDC-Data
#define USB_CLASS_SMART_CARD 0x0b // Smart-Card
#define USB_CLASS_CONTENT_SECURITY 0x0d // Content Security
#define USB_CLASS_VIDEO 0x0e // Video
#define USB_CLASS_PERSONAL_HEALTH 0x0f // Personal Healthcare
#define USB_CLASS_DIAGNOSTIC_DEVICE 0xdc // Diagnostic Device
#define USB_CLASS_WIRELESS_CTRL 0xe0 // Wireless Controller
#define USB_CLASS_MISC 0xef // Miscellaneous
#define USB_CLASS_APP_SPECIFIC 0xfe // Application Specific
#define USB_CLASS_VENDOR_SPECIFIC 0xff // Vendor Specific
// Additional Error Codes
#define USB_DEV_CONFIG_ERROR_DEVICE_NOT_SUPPORTED 0xD1
#define USB_DEV_CONFIG_ERROR_DEVICE_INIT_INCOMPLETE 0xD2
#define USB_ERROR_UNABLE_TO_REGISTER_DEVICE_CLASS 0xD3
#define USB_ERROR_OUT_OF_ADDRESS_SPACE_IN_POOL 0xD4
#define USB_ERROR_HUB_ADDRESS_OVERFLOW 0xD5
#define USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL 0xD6
#define USB_ERROR_EPINFO_IS_NULL 0xD7
#define USB_ERROR_INVALID_ARGUMENT 0xD8
#define USB_ERROR_CLASS_INSTANCE_ALREADY_IN_USE 0xD9
#define USB_ERROR_INVALID_MAX_PKT_SIZE 0xDA
#define USB_ERROR_EP_NOT_FOUND_IN_TBL 0xDB
#define USB_ERROR_TRANSFER_TIMEOUT 0xFF
class USBDeviceConfig {
public:
virtual uint8_t Init(uint8_t parent, uint8_t port, bool lowspeed) = 0;
virtual uint8_t Release() = 0;
virtual uint8_t Poll() = 0;
virtual uint8_t GetAddress() = 0;
};
#define USB_XFER_TIMEOUT 5000 //USB transfer timeout in milliseconds, per section 9.2.6.1 of USB 2.0 spec
//#define USB_NAK_LIMIT 32000 //NAK limit for a transfer. 0 means NAKs are not counted
#define USB_RETRY_LIMIT 3 //retry limit for a transfer
#define USB_SETTLE_DELAY 200 //settle delay in milliseconds
#define USB_NUMDEVICES 16 //number of USB devices
//#define HUB_MAX_HUBS 7 // maximum number of hubs that can be attached to the host controller
#define HUB_PORT_RESET_DELAY 20 // hub port reset delay 10 ms recomended, can be up to 20 ms
/* USB state machine states */
#define USB_STATE_MASK 0xf0
#define USB_STATE_DETACHED 0x10
#define USB_DETACHED_SUBSTATE_INITIALIZE 0x11
#define USB_DETACHED_SUBSTATE_WAIT_FOR_DEVICE 0x12
#define USB_DETACHED_SUBSTATE_ILLEGAL 0x13
#define USB_ATTACHED_SUBSTATE_SETTLE 0x20
#define USB_ATTACHED_SUBSTATE_RESET_DEVICE 0x30
#define USB_ATTACHED_SUBSTATE_WAIT_RESET_COMPLETE 0x40
#define USB_ATTACHED_SUBSTATE_WAIT_SOF 0x50
#define USB_ATTACHED_SUBSTATE_GET_DEVICE_DESCRIPTOR_SIZE 0x60
#define USB_STATE_ADDRESSING 0x70
#define USB_STATE_CONFIGURING 0x80
#define USB_STATE_RUNNING 0x90
#define USB_STATE_ERROR 0xa0
/* USB Setup Packet Structure */
typedef struct {
union { // offset description
uint8_t bmRequestType; // 0 Bit-map of request type
struct {
uint8_t recipient : 5; // Recipient of the request
uint8_t type : 2; // Type of request
uint8_t direction : 1; // Direction of data X-fer
} __attribute__((packed));
} ReqType_u;
uint8_t bRequest; // 1 Request
union {
uint16_t wValue; // 2 Depends on bRequest
struct {
uint8_t wValueLo;
uint8_t wValueHi;
} __attribute__((packed));
} wVal_u;
uint16_t wIndex; // 4 Depends on bRequest
uint16_t wLength; // 6 Depends on bRequest
} SETUP_PKT, *PSETUP_PKT __attribute__((packed));
// Base class for incomming data parser
class USBReadParser {
public:
virtual void Parse(const uint16_t len, const uint8_t *pbuf, const uint16_t &offset) = 0;
};
class USB : public MAX3421E {
AddressPoolImpl<USB_NUMDEVICES> addrPool;
USBDeviceConfig* devConfig[USB_NUMDEVICES];
uint8_t devConfigIndex;
uint8_t bmHubPre;
public:
USB(void);
void SetHubPreMask() {
bmHubPre |= bmHUBPRE;
};
void ResetHubPreMask() {
bmHubPre &= (~bmHUBPRE);
};
AddressPool& GetAddressPool() {
return(AddressPool&) addrPool;
};
uint8_t RegisterDeviceClass(USBDeviceConfig *pdev) {
for(uint8_t i = 0; i < USB_NUMDEVICES; i++) {
if(!devConfig[i]) {
devConfig[i] = pdev;
return 0;
}
}
return USB_ERROR_UNABLE_TO_REGISTER_DEVICE_CLASS;
};
void ForEachUsbDevice(UsbDeviceHandleFunc pfunc) {
addrPool.ForEachUsbDevice(pfunc);
};
uint8_t getUsbTaskState(void);
void setUsbTaskState(uint8_t state);
EpInfo* getEpInfoEntry(uint8_t addr, uint8_t ep);
uint8_t setEpInfoEntry(uint8_t addr, uint8_t epcount, EpInfo* eprecord_ptr);
//uint8_t ctrlReq( uint8_t addr, uint8_t ep, uint8_t bmReqType, uint8_t bRequest, uint8_t wValLo, uint8_t wValHi, uint16_t wInd, uint16_t nbytes, uint8_t* dataptr);
/* Control requests */
uint8_t getDevDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* dataptr);
uint8_t getConfDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t conf, uint8_t* dataptr);
uint8_t getConfDescr(uint8_t addr, uint8_t ep, uint8_t conf, USBReadParser *p);
uint8_t getStrDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t index, uint16_t langid, uint8_t* dataptr);
uint8_t setAddr(uint8_t oldaddr, uint8_t ep, uint8_t newaddr);
uint8_t setConf(uint8_t addr, uint8_t ep, uint8_t conf_value);
/**/
uint8_t ctrlData(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* dataptr, boolean direction);
uint8_t ctrlStatus(uint8_t ep, boolean direction, uint16_t nak_limit);
uint8_t inTransfer(uint8_t addr, uint8_t ep, uint16_t *nbytesptr, uint8_t* data);
uint8_t outTransfer(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* data);
uint8_t dispatchPkt(uint8_t token, uint8_t ep, uint16_t nak_limit);
void Task(void);
uint8_t DefaultAddressing(uint8_t parent, uint8_t port, bool lowspeed);
uint8_t Configuring(uint8_t parent, uint8_t port, bool lowspeed);
uint8_t ReleaseDevice(uint8_t addr);
uint8_t ctrlReq(uint8_t addr, uint8_t ep, uint8_t bmReqType, uint8_t bRequest, uint8_t wValLo, uint8_t wValHi,
uint16_t wInd, uint16_t total, uint16_t nbytes, uint8_t* dataptr, USBReadParser *p);
private:
void init();
uint8_t SetAddress(uint8_t addr, uint8_t ep, EpInfo **ppep, uint16_t &nak_limit);
uint8_t OutTransfer(EpInfo *pep, uint16_t nak_limit, uint16_t nbytes, uint8_t *data);
uint8_t InTransfer(EpInfo *pep, uint16_t nak_limit, uint16_t *nbytesptr, uint8_t *data);
};
#if 0 //defined(USB_METHODS_INLINE)
//get device descriptor
inline uint8_t USB::getDevDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* dataptr) {
return( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, 0x00, USB_DESCRIPTOR_DEVICE, 0x0000, nbytes, dataptr));
}
//get configuration descriptor
inline uint8_t USB::getConfDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t conf, uint8_t* dataptr) {
return( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, conf, USB_DESCRIPTOR_CONFIGURATION, 0x0000, nbytes, dataptr));
}
//get string descriptor
inline uint8_t USB::getStrDescr(uint8_t addr, uint8_t ep, uint16_t nuint8_ts, uint8_t index, uint16_t langid, uint8_t* dataptr) {
return( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, index, USB_DESCRIPTOR_STRING, langid, nuint8_ts, dataptr));
}
//set address
inline uint8_t USB::setAddr(uint8_t oldaddr, uint8_t ep, uint8_t newaddr) {
return( ctrlReq(oldaddr, ep, bmREQ_SET, USB_REQUEST_SET_ADDRESS, newaddr, 0x00, 0x0000, 0x0000, NULL));
}
//set configuration
inline uint8_t USB::setConf(uint8_t addr, uint8_t ep, uint8_t conf_value) {
return( ctrlReq(addr, ep, bmREQ_SET, USB_REQUEST_SET_CONFIGURATION, conf_value, 0x00, 0x0000, 0x0000, NULL));
}
#endif // defined(USB_METHODS_INLINE)
#endif //_usb_h_
Reference in a new issue View git blame Copy permalink