USB_Host_Shield_2.0/examples/Bluetooth/SPPMulti/SPPMulti.ino
2014-07-01 13:43:45 +02:00

63 lines
2.3 KiB
C++

/*
Example sketch for the RFCOMM/SPP Bluetooth library - developed by Kristian Lauszus
For more information visit my blog: http://blog.tkjelectronics.dk/ or
send me an e-mail: kristianl@tkjelectronics.com
*/
#include <SPP.h>
#include <usbhub.h>
// Satisfy IDE, which only needs to see the include statement in the ino.
#ifdef dobogusinclude
#include <spi4teensy3.h>
#endif
USB Usb;
//USBHub Hub1(&Usb); // Some dongles have a hub inside
BTD Btd(&Usb); // You have to create the Bluetooth Dongle instance like so
const uint8_t length = 2; // Set the number of instances here
SPP *SerialBT[length]; // We will use this pointer to store the instances, you can easily make it larger if you like, but it will use a lot of RAM!
boolean firstMessage[length] = { true }; // Set all to true
void setup() {
for (uint8_t i = 0; i < length; i++)
SerialBT[i] = new SPP(&Btd); // This will set the name to the default: "Arduino" and the pin to "0000" for all connections
Serial.begin(115200);
while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
if (Usb.Init() == -1) {
Serial.print(F("\r\nOSC did not start"));
while (1); // Halt
}
Serial.print(F("\r\nSPP Bluetooth Library Started"));
}
void loop() {
Usb.Task(); // The SPP data is actually not send until this is called, one could call SerialBT.send() directly as well
for (uint8_t i = 0; i < length; i++) {
if (SerialBT[i]->connected) {
if (firstMessage[i]) {
firstMessage[i] = false;
SerialBT[i]->println(F("Hello from Arduino")); // Send welcome message
}
if (SerialBT[i]->available())
Serial.write(SerialBT[i]->read());
}
else
firstMessage[i] = true;
}
// Set the connection you want to send to using the first character
// For instance "0Hello World" would send "Hello World" to connection 0
if (Serial.available()) {
delay(10); // Wait for the rest of the data to arrive
uint8_t id = Serial.read() - '0'; // Convert from ASCII
if (id < length && SerialBT[id]->connected) { // Make sure that the id is valid and make sure that a device is actually connected
while (Serial.available()) // Check if data is available
SerialBT[id]->write(Serial.read()); // Send the data
}
}
}