mirror of
https://github.com/felis/USB_Host_Shield_2.0.git
synced 2024-03-22 11:31:26 +01:00
68 lines
2.5 KiB
C++
68 lines
2.5 KiB
C++
/*
|
|
Example sketch for the RFCOMM/SPP Bluetooth library - developed by Kristian Lauszus
|
|
For more information visit my blog: http://blog.tkjelectronics.dk/ or
|
|
send me an e-mail: kristianl@tkjelectronics.com
|
|
*/
|
|
|
|
#include <SPP.h>
|
|
USB Usb;
|
|
BTD Btd(&Usb); // You have to create the Bluetooth Dongle instance like so
|
|
|
|
// This will set the name to the defaults: "Arduino" and the pin to "1234" for both connections
|
|
SPP SPP_1(&Btd); // This will allow you to communicate with two SPP devices simultaneously
|
|
SPP SPP_2(&Btd);
|
|
//SPP SPP_3(&Btd); // You can create as many instances as you like, but it will take up a lot of RAM!!
|
|
|
|
// You can also set the name and pin like so
|
|
//SPP SerialBT(&Btd, "Lauszus's Arduino","0000");
|
|
|
|
SPP* SerialBT[2]; // We will use this pointer to store the two instance, you can easily make it larger if you like
|
|
const uint8_t length = sizeof(SerialBT)/sizeof(SerialBT[0]); // Get the lenght of the array
|
|
boolean firstMessage[length] = { true }; // Set all to true
|
|
uint8_t buffer[50];
|
|
|
|
void setup() {
|
|
SerialBT[0] = &SPP_1; // This will point to the first instance
|
|
SerialBT[1] = &SPP_2; // This will point to the second instance
|
|
//SerialBT[2] = &SPP_3; // You only need to uncomment this if you wanted to use another instance
|
|
|
|
Serial.begin(115200);
|
|
if (Usb.Init() == -1) {
|
|
Serial.print(F("\r\nOSC did not start"));
|
|
while(1); //halt
|
|
}
|
|
Serial.print(F("\r\nSPP Bluetooth Library Started"));
|
|
}
|
|
void loop() {
|
|
Usb.Task();
|
|
for(uint8_t i=0;i<length;i++) {
|
|
if(SerialBT[i]->connected) {
|
|
if(firstMessage[i]) {
|
|
firstMessage[i] = false;
|
|
SerialBT[i]->println(F("Hello from Arduino")); // Send welcome message
|
|
}
|
|
if(SerialBT[i]->available())
|
|
Serial.write(SerialBT[i]->read());
|
|
}
|
|
else
|
|
firstMessage[i] = true;
|
|
}
|
|
if(Serial.available()) {
|
|
delay(10); // Wait for the rest of the data to arrive
|
|
uint8_t i = 0;
|
|
while(Serial.available()) // Read the data
|
|
buffer[i++] = Serial.read();
|
|
/*
|
|
Set the connection you want to send to using the first character
|
|
For instace "0Hello World" would send "Hello World" to connection 0
|
|
*/
|
|
uint8_t id = buffer[0]-'0'; // Convert from ASCII
|
|
if(id < length && i > 1) { // And then compare to length and make sure there is any text
|
|
if(SerialBT[id]->connected) { // Check if a device is actually connected
|
|
for(uint8_t i2 = 0; i2 < i-1; i2++) // Don't include the first character
|
|
buffer[i2] = buffer[i2+1];
|
|
SerialBT[id]->println(buffer,i-1); // Send the data
|
|
}
|
|
}
|
|
}
|
|
}
|