USB_Host_Shield_2.0/examples/PS3USB/PS3USB.ino

/*
 Example sketch for the PS3 USB library - developed by Kristian Lauszus
 For more information visit my blog: http://blog.tkjelectronics.dk/ or 
 send me an e-mail:  kristianl@tkjelectronics.com
 */

#include <PS3USB.h>
USB Usb;
/* You can create the instance of the class in two ways */
PS3USB PS3(&Usb); // This will just create the instance
//PS3USB PS3(&Usb,0x00,0x15,0x83,0x3D,0x0A,0x57); // This will also store the bluetooth address - this can be obtained from the dongle when running the sketch

boolean printAngle;
uint8_t state = 0;

void setup() {
  Serial.begin(115200);

  if (Usb.Init() == -1) {
    Serial.print(F("\r\nOSC did not start"));
    while(1); //halt
  }  
  Serial.print(F("\r\nPS3 USB Library Started"));
}
void loop() {
  Usb.Task();

  if(PS3.PS3Connected || PS3.PS3NavigationConnected) {
    if(PS3.getAnalogHat(LeftHatX) > 137 || PS3.getAnalogHat(LeftHatX) < 117 || PS3.getAnalogHat(LeftHatY) > 137 || PS3.getAnalogHat(LeftHatY) < 117 || PS3.getAnalogHat(RightHatX) > 137 || PS3.getAnalogHat(RightHatX) < 117 || PS3.getAnalogHat(RightHatY) > 137 || PS3.getAnalogHat(RightHatY) < 117) {
      if(PS3.getAnalogHat(LeftHatX) > 137 || PS3.getAnalogHat(LeftHatX) < 117) {
        Serial.print(F("LeftHatX: ")); 
        Serial.print(PS3.getAnalogHat(LeftHatX));
        Serial.print("\t");
      } 
      if(PS3.getAnalogHat(LeftHatY) > 137 || PS3.getAnalogHat(LeftHatY) < 117) {
        Serial.print(F("LeftHatY: ")); 
        Serial.print(PS3.getAnalogHat(LeftHatY));
        Serial.print("\t");
      } 
      if(PS3.getAnalogHat(RightHatX) > 137 || PS3.getAnalogHat(RightHatX) < 117) {
        Serial.print(F("RightHatX: ")); 
        Serial.print(PS3.getAnalogHat(RightHatX));
        Serial.print("\t");      
      } 
      if(PS3.getAnalogHat(RightHatY) > 137 || PS3.getAnalogHat(RightHatY) < 117) {
        Serial.print(F("RightHatY: ")); 
        Serial.print(PS3.getAnalogHat(RightHatY));  
      }
      Serial.println("");
    }

    // Analog button values can be read from almost all buttons
    if(PS3.getAnalogButton(L2_ANALOG) > 0 || PS3.getAnalogButton(R2_ANALOG) > 0) {
      if(PS3.getAnalogButton(L2_ANALOG) > 0) {
        Serial.print(F("L2: ")); 
        Serial.print(PS3.getAnalogButton(L2_ANALOG));
        Serial.print("\t"); 
      } 
      if(PS3.getAnalogButton(R2_ANALOG) > 0) {
        Serial.print(F("R2: ")); 
        Serial.print(PS3.getAnalogButton(R2_ANALOG)); 
      }
      Serial.println("");
    }

    if(PS3.buttonPressed)     
    {
      Serial.print(F("PS3 Controller"));

      if(PS3.getButton(PS))
        Serial.print(F(" - PS"));
        
      if(PS3.getButton(TRIANGLE))
        Serial.print(F(" - Traingle"));
      if(PS3.getButton(CIRCLE))
        Serial.print(F(" - Circle"));
      if(PS3.getButton(CROSS))
        Serial.print(F(" - Cross"));
      if(PS3.getButton(SQUARE))
        Serial.print(F(" - Square"));

      if(PS3.getButton(UP)) {
        Serial.print(F(" - Up"));
        PS3.setAllOff();
        PS3.setLedOn(LED4);
      } 
      if(PS3.getButton(RIGHT)) {
        Serial.print(F(" - Right"));
        PS3.setAllOff();
        PS3.setLedOn(LED1);          
      } 
      if(PS3.getButton(DOWN)) {
        Serial.print(F(" - Down"));
        PS3.setAllOff();
        PS3.setLedOn(LED2);          
      } 
      if(PS3.getButton(LEFT)) {          
        Serial.print(F(" - Left"));
        PS3.setAllOff();         
        PS3.setLedOn(LED3);          
      } 

      if(PS3.getButton(L1))
        Serial.print(F(" - L1"));  
      //if(PS3.getButton(L2))
      //Serial.print(F(" - L2"));
      if(PS3.getButton(L3))
        Serial.print(F(" - L3")); 
      if(PS3.getButton(R1))
        Serial.print(F(" - R1"));  
      //if(PS3.getButton(R2))
      //Serial.print(F(" - R2"));              
      if(PS3.getButton(R3))
        Serial.print(F(" - R3"));

      if(PS3.getButton(SELECT)) {
        Serial.print(F(" - Select - ")); 
        Serial.print(PS3.getStatusString());        
      } 
      if(PS3.getButton(START)) {
        Serial.print(F(" - Start"));              
        printAngle = !printAngle;
        while(PS3.getButton(START))
          Usb.Task();
      }                    
      Serial.println("");                             
    }
    if(printAngle) {
      Serial.print(F("Pitch: "));               
      Serial.print(PS3.getAngle(Pitch));                  
      Serial.print(F("\tRoll: ")); 
      Serial.println(PS3.getAngle(Roll));
    }        
  }
  else if(PS3.PS3MoveConnected) { // One can only set the color of the bulb, set the rumble, set and get the bluetooth address and calibrate the magnetometer via USB
    switch(state) {
      case 0:
      PS3.moveSetRumble(0);    
      PS3.moveSetBulb(Off);      
      state = 1;
      break;
      
      case 1:
      PS3.moveSetRumble(75);
      PS3.moveSetBulb(Red);     
      state = 2;
      break;
      
      case 2:
      PS3.moveSetRumble(125);
      PS3.moveSetBulb(Green);     
      state = 3;
      break;
      
      case 3:
      PS3.moveSetRumble(150);
      PS3.moveSetBulb(Blue);     
      state = 4;
      break;
      
      case 4:
      PS3.moveSetRumble(175);
      PS3.moveSetBulb(Yellow);    
      state = 5;
      break;
      
      case 5:
      PS3.moveSetRumble(200);
      PS3.moveSetBulb(Lightblue);    
      state = 6;
      break;
      
      case 6:
      PS3.moveSetRumble(225);
      PS3.moveSetBulb(Purble);   
      state = 7;
      break;
      
      case 7:
      PS3.moveSetRumble(250);
      PS3.moveSetBulb(White);   
      state = 0;
      break;
    }
    delay(1000);
  }
}