mirror of
https://github.com/felis/USB_Host_Shield_2.0.git
synced 2024-03-22 11:31:26 +01:00
671 lines
29 KiB
C++
671 lines
29 KiB
C++
/* Copyright (C) 2012 Kristian Lauszus, TKJ Electronics. All rights reserved.
|
|
|
|
This software may be distributed and modified under the terms of the GNU
|
|
General Public License version 2 (GPL2) as published by the Free Software
|
|
Foundation and appearing in the file GPL2.TXT included in the packaging of
|
|
this file. Please note that GPL2 Section 2[b] requires that all works based
|
|
on this software must also be made publicly available under the terms of
|
|
the GPL2 ("Copyleft").
|
|
|
|
Contact information
|
|
-------------------
|
|
|
|
Kristian Lauszus, TKJ Electronics
|
|
Web : http://www.tkjelectronics.com
|
|
e-mail : kristianl@tkjelectronics.com
|
|
*/
|
|
|
|
#include "PS3BT.h"
|
|
#define DEBUG // Uncomment to print data for debugging
|
|
//#define EXTRADEBUG // Uncomment to get even more debugging data
|
|
//#define PRINTREPORT // Uncomment to print the report send by the PS3 Controllers
|
|
|
|
const uint8_t OUTPUT_REPORT_BUFFER[] PROGMEM = {
|
|
0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0xff, 0x27, 0x10, 0x00, 0x32,
|
|
0xff, 0x27, 0x10, 0x00, 0x32,
|
|
0xff, 0x27, 0x10, 0x00, 0x32,
|
|
0xff, 0x27, 0x10, 0x00, 0x32,
|
|
0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
|
|
};
|
|
|
|
PS3BT::PS3BT(BTD *p, uint8_t btadr5, uint8_t btadr4, uint8_t btadr3, uint8_t btadr2, uint8_t btadr1, uint8_t btadr0):
|
|
pBtd(p) // pointer to USB class instance - mandatory
|
|
{
|
|
if (pBtd)
|
|
pBtd->registerServiceClass(this); // Register it as a Bluetooth service
|
|
|
|
pBtd->my_bdaddr[5] = btadr5; // Change to your dongle's Bluetooth address instead
|
|
pBtd->my_bdaddr[4] = btadr4;
|
|
pBtd->my_bdaddr[3] = btadr3;
|
|
pBtd->my_bdaddr[2] = btadr2;
|
|
pBtd->my_bdaddr[1] = btadr1;
|
|
pBtd->my_bdaddr[0] = btadr0;
|
|
|
|
HIDBuffer[0] = 0x52;// HID BT Set_report (0x50) | Report Type (Output 0x02)
|
|
HIDBuffer[1] = 0x01;// Report ID
|
|
|
|
//Needed for PS3 Move Controller commands to work via bluetooth
|
|
HIDMoveBuffer[0] = 0xA2;// HID BT DATA_request (0xA0) | Report Type (Output 0x02)
|
|
HIDMoveBuffer[1] = 0x02;// Report ID
|
|
|
|
/* Set device cid for the control and intterrupt channelse - LSB */
|
|
control_dcid[0] = 0x40;//0x0040
|
|
control_dcid[1] = 0x00;
|
|
interrupt_dcid[0] = 0x41;//0x0041
|
|
interrupt_dcid[1] = 0x00;
|
|
|
|
Release();
|
|
}
|
|
bool PS3BT::getButton(Button b)
|
|
{
|
|
if (l2capinpointer == NULL)
|
|
return false;
|
|
if(PS3MoveConnected) {
|
|
if((l2capinpointer[((uint16_t)b >> 8)-1] & ((uint8_t)b & 0xff))) // All the buttons locations are shifted one back on the Move controller
|
|
return true;
|
|
else
|
|
return false;
|
|
} else {
|
|
if((l2capinpointer[(uint16_t)b >> 8] & ((uint8_t)b & 0xff)))
|
|
return true;
|
|
else
|
|
return false;
|
|
}
|
|
}
|
|
uint8_t PS3BT::getAnalogButton(AnalogButton a)
|
|
{
|
|
if (l2capinpointer == NULL)
|
|
return 0;
|
|
return (uint8_t)(l2capinpointer[(uint16_t)a]);
|
|
}
|
|
uint8_t PS3BT::getAnalogHat(AnalogHat a)
|
|
{
|
|
if (l2capinpointer == NULL)
|
|
return 0;
|
|
return (uint8_t)(l2capinpointer[(uint16_t)a]);
|
|
}
|
|
int16_t PS3BT::getSensor(Sensor a)
|
|
{
|
|
if (l2capinpointer == NULL)
|
|
return 0;
|
|
if (a == aX || a == aY || a == aZ || a == gZ)
|
|
return ((l2capinpointer[(uint16_t)a] << 8) | l2capinpointer[(uint16_t)a + 1]);
|
|
else if (a == mXmove || a == mYmove || a == mZmove) // These are all 12-bits long
|
|
{
|
|
// Might not be correct, haven't tested it yet
|
|
/*if (a == mXmove)
|
|
return ((l2capinpointer[(uint16_t)a + 1] << 0x04) | (l2capinpointer[(uint16_t)a] << 0x0C));
|
|
else if (a == mYmove)
|
|
return ((l2capinpointer[(uint16_t)a + 1] & 0xF0) | (l2capinpointer[(uint16_t)a] << 0x08));
|
|
else if (a == mZmove)
|
|
return ((l2capinpointer[(uint16_t)a + 1] << 0x0F) | (l2capinpointer[(uint16_t)a] << 0x0C));
|
|
*/
|
|
if (a == mXmove || a == mYmove)
|
|
return (((l2capinpointer[(uint16_t)a] & 0x0F) << 8) | (l2capinpointer[(uint16_t)a + 1]));
|
|
else // mZmove
|
|
return ((l2capinpointer[(uint16_t)a] << 4) | (l2capinpointer[(uint16_t)a + 1] >> 4));
|
|
}
|
|
else if (a == tempMove) // The tempearature is 12 bits long too
|
|
return ((l2capinpointer[(uint16_t)a] << 4) | ((l2capinpointer[(uint16_t)a + 1] & 0xF0) >> 4));
|
|
else // aXmove, aYmove, aZmove, gXmove, gYmove and gZmove
|
|
return (l2capinpointer[(uint16_t)a] | (l2capinpointer[(uint16_t)a + 1] << 8));
|
|
}
|
|
double PS3BT::getAngle(Angle a) {
|
|
double accXval;
|
|
double accYval;
|
|
double accZval;
|
|
|
|
if(PS3Connected) {
|
|
// Data for the Kionix KXPC4 used in the DualShock 3
|
|
const double zeroG = 511.5; // 1.65/3.3*1023 (1,65V)
|
|
accXval = -((double)getSensor(aX)-zeroG);
|
|
accYval = -((double)getSensor(aY)-zeroG);
|
|
accZval = -((double)getSensor(aZ)-zeroG);
|
|
} else if(PS3MoveConnected) {
|
|
// It's a Kionix KXSC4 inside the Motion controller
|
|
const uint16_t zeroG = 0x8000;
|
|
accXval = -(int16_t)(getSensor(aXmove)-zeroG);
|
|
accYval = (int16_t)(getSensor(aYmove)-zeroG);
|
|
accZval = (int16_t)(getSensor(aZmove)-zeroG);
|
|
}
|
|
|
|
// Convert to 360 degrees resolution
|
|
// atan2 outputs the value of -π to π (radians)
|
|
// We are then converting it to 0 to 2π and then to degrees
|
|
if (a == Pitch) {
|
|
double angle = (atan2(accYval,accZval)+PI)*RAD_TO_DEG;
|
|
return angle;
|
|
} else {
|
|
double angle = (atan2(accXval,accZval)+PI)*RAD_TO_DEG;
|
|
return angle;
|
|
}
|
|
}
|
|
String PS3BT::getTemperature() {
|
|
if(PS3MoveConnected) {
|
|
int16_t input = getSensor(tempMove);
|
|
|
|
String output = String(input/100);
|
|
output += ".";
|
|
if(input%100 < 10)
|
|
output += "0";
|
|
output += String(input%100);
|
|
|
|
return output;
|
|
}
|
|
}
|
|
bool PS3BT::getStatus(Status c)
|
|
{
|
|
if (l2capinpointer == NULL)
|
|
return false;
|
|
if (l2capinpointer[(uint16_t)c >> 8] == ((uint8_t)c & 0xff))
|
|
return true;
|
|
return false;
|
|
}
|
|
String PS3BT::getStatusString()
|
|
{
|
|
if (PS3Connected || PS3NavigationConnected)
|
|
{
|
|
char statusOutput[100];
|
|
|
|
strcpy(statusOutput,"ConnectionStatus: ");
|
|
|
|
if (getStatus(Plugged)) strcat(statusOutput,"Plugged");
|
|
else if (getStatus(Unplugged)) strcat(statusOutput,"Unplugged");
|
|
else strcat(statusOutput,"Error");
|
|
|
|
|
|
strcat(statusOutput," - PowerRating: ");
|
|
if (getStatus(Charging)) strcat(statusOutput,"Charging");
|
|
else if (getStatus(NotCharging)) strcat(statusOutput,"Not Charging");
|
|
else if (getStatus(Shutdown)) strcat(statusOutput,"Shutdown");
|
|
else if (getStatus(Dying)) strcat(statusOutput,"Dying");
|
|
else if (getStatus(Low)) strcat(statusOutput,"Low");
|
|
else if (getStatus(High)) strcat(statusOutput,"High");
|
|
else if (getStatus(Full)) strcat(statusOutput,"Full");
|
|
else strcat(statusOutput,"Error");
|
|
|
|
strcat(statusOutput," - WirelessStatus: ");
|
|
|
|
if (getStatus(CableRumble)) strcat(statusOutput,"Cable - Rumble is on");
|
|
else if (getStatus(Cable)) strcat(statusOutput,"Cable - Rumble is off");
|
|
else if (getStatus(BluetoothRumble)) strcat(statusOutput,"Bluetooth - Rumble is on");
|
|
else if (getStatus(Bluetooth)) strcat(statusOutput,"Bluetooth - Rumble is off");
|
|
else strcat(statusOutput,"Error");
|
|
|
|
return statusOutput;
|
|
|
|
}
|
|
else if(PS3MoveConnected)
|
|
{
|
|
char statusOutput[50];
|
|
|
|
strcpy(statusOutput,"PowerRating: ");
|
|
|
|
if (getStatus(MoveCharging)) strcat(statusOutput,"Charging");
|
|
else if (getStatus(MoveNotCharging)) strcat(statusOutput,"Not Charging");
|
|
else if (getStatus(MoveShutdown)) strcat(statusOutput,"Shutdown");
|
|
else if (getStatus(MoveDying)) strcat(statusOutput,"Dying");
|
|
else if (getStatus(MoveLow)) strcat(statusOutput,"Low");
|
|
else if (getStatus(MoveHigh)) strcat(statusOutput,"High");
|
|
else if (getStatus(MoveFull)) strcat(statusOutput,"Full");
|
|
else strcat(statusOutput,"Error");
|
|
|
|
return statusOutput;
|
|
}
|
|
}
|
|
void PS3BT::Release() {
|
|
PS3Connected = false;
|
|
PS3MoveConnected = false;
|
|
PS3NavigationConnected = false;
|
|
l2cap_event_flag = 0; // Reset flags
|
|
l2cap_state = L2CAP_EV_WAIT;
|
|
|
|
// Needed for PS3 Dualshock Controller commands to work via bluetooth
|
|
for (uint8_t i = 0; i < OUTPUT_REPORT_BUFFER_SIZE; i++)
|
|
HIDBuffer[i + 2] = pgm_read_byte(&OUTPUT_REPORT_BUFFER[i]); // First two bytes reserved for report type and ID
|
|
}
|
|
|
|
void PS3BT::disconnect() { //Use this void to disconnect any of the controllers
|
|
PS3Connected = false;
|
|
PS3MoveConnected = false;
|
|
PS3NavigationConnected = false;
|
|
|
|
//First the HID interrupt channel has to be disconencted, then the HID control channel and finally the HCI connection
|
|
pBtd->l2cap_disconnection_request(hci_handle,0x0A, interrupt_scid, interrupt_dcid);
|
|
l2cap_event_flag = 0; // Reset flags
|
|
l2cap_state = L2CAP_EV_INTERRUPT_DISCONNECT;
|
|
}
|
|
|
|
void PS3BT::ACLData(uint8_t* l2capinbuf) {
|
|
l2capinpointer = l2capinbuf;
|
|
if (l2capinbuf[8] == L2CAP_CMD_CONNECTION_REQUEST) {
|
|
if(((l2capinbuf[12] | (l2capinbuf[13] << 8)) == HID_CTRL_PSM) || ((l2capinbuf[12] | (l2capinbuf[13] << 8)) == HID_INTR_PSM)) {
|
|
if(!pBtd->connectionClaimed && !PS3Connected && !PS3MoveConnected && !PS3NavigationConnected) {
|
|
pBtd->claimConnection(); // Claim that the incoming connection belongs to this service
|
|
hci_handle = pBtd->hci_handle; // Store the HCI Handle for the connection
|
|
for(uint8_t i = 0; i < 30; i++)
|
|
remote_name[i] = pBtd->remote_name[i]; // Store the remote name for the connection
|
|
#ifdef DEBUG
|
|
if(pBtd->hci_version < 3) { // Check the HCI Version of the Bluetooth dongle
|
|
Notify(PSTR("\r\nYour dongle may not support reading the analog buttons, sensors and status\r\nYour HCI Version is: "));
|
|
Serial.print(pBtd->hci_version);
|
|
Notify(PSTR("\r\nBut should be at least 3\r\nThis means that it doesn't support Bluetooth Version 2.0+EDR"));
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
}
|
|
if (((l2capinbuf[0] | (l2capinbuf[1] << 8)) == (hci_handle | 0x2000))) { //acl_handle_ok
|
|
if ((l2capinbuf[6] | (l2capinbuf[7] << 8)) == 0x0001) { //l2cap_control - Channel ID for ACL-U
|
|
if (l2capinbuf[8] == L2CAP_CMD_COMMAND_REJECT) {
|
|
#ifdef DEBUG
|
|
Notify(PSTR("\r\nL2CAP Command Rejected - Reason: "));
|
|
PrintHex<uint8_t>(l2capinbuf[13]);
|
|
Serial.print(" ");
|
|
PrintHex<uint8_t>(l2capinbuf[12]);
|
|
Serial.print(" Data: ");
|
|
PrintHex<uint8_t>(l2capinbuf[17]);
|
|
Serial.print(" ");
|
|
PrintHex<uint8_t>(l2capinbuf[16]);
|
|
Serial.print(" ");
|
|
PrintHex<uint8_t>(l2capinbuf[15]);
|
|
Serial.print(" ");
|
|
PrintHex<uint8_t>(l2capinbuf[14]);
|
|
#endif
|
|
}
|
|
else if (l2capinbuf[8] == L2CAP_CMD_CONNECTION_REQUEST) {
|
|
#ifdef EXTRADEBUG
|
|
Notify(PSTR("\r\nL2CAP Connection Request - PSM: "));
|
|
PrintHex<uint8_t>(l2capinbuf[13]);
|
|
Notify(PSTR(" "));
|
|
PrintHex<uint8_t>(l2capinbuf[12]);
|
|
Notify(PSTR(" SCID: "));
|
|
PrintHex<uint8_t>(l2capinbuf[15]);
|
|
Notify(PSTR(" "));
|
|
PrintHex<uint8_t>(l2capinbuf[14]);
|
|
Notify(PSTR(" Identifier: "));
|
|
PrintHex<uint8_t>(l2capinbuf[9]);
|
|
#endif
|
|
if ((l2capinbuf[12] | (l2capinbuf[13] << 8)) == HID_CTRL_PSM) {
|
|
identifier = l2capinbuf[9];
|
|
control_scid[0] = l2capinbuf[14];
|
|
control_scid[1] = l2capinbuf[15];
|
|
l2cap_event_flag |= L2CAP_FLAG_CONNECTION_CONTROL_REQUEST;
|
|
}
|
|
else if ((l2capinbuf[12] | (l2capinbuf[13] << 8)) == HID_INTR_PSM) {
|
|
identifier = l2capinbuf[9];
|
|
interrupt_scid[0] = l2capinbuf[14];
|
|
interrupt_scid[1] = l2capinbuf[15];
|
|
l2cap_event_flag |= L2CAP_FLAG_CONNECTION_INTERRUPT_REQUEST;
|
|
}
|
|
}
|
|
else if (l2capinbuf[8] == L2CAP_CMD_CONFIG_RESPONSE) {
|
|
if (l2capinbuf[12] == control_dcid[0] && l2capinbuf[13] == control_dcid[1]) {
|
|
if ((l2capinbuf[16] | (l2capinbuf[17] << 8)) == 0x0000) { //Success
|
|
//Serial.print("\r\nHID Control Configuration Complete");
|
|
l2cap_event_flag |= L2CAP_FLAG_CONFIG_CONTROL_SUCCESS;
|
|
}
|
|
}
|
|
else if (l2capinbuf[12] == interrupt_dcid[0] && l2capinbuf[13] == interrupt_dcid[1]) {
|
|
if ((l2capinbuf[16] | (l2capinbuf[17] << 8)) == 0x0000) { //Success
|
|
//Serial.print("\r\nHID Interrupt Configuration Complete");
|
|
l2cap_event_flag |= L2CAP_FLAG_CONFIG_INTERRUPT_SUCCESS;
|
|
}
|
|
}
|
|
}
|
|
else if (l2capinbuf[8] == L2CAP_CMD_CONFIG_REQUEST) {
|
|
if (l2capinbuf[12] == control_dcid[0] && l2capinbuf[13] == control_dcid[1]) {
|
|
//Serial.print("\r\nHID Control Configuration Request");
|
|
identifier = l2capinbuf[9];
|
|
l2cap_event_flag |= L2CAP_FLAG_CONFIG_CONTROL_REQUEST;
|
|
}
|
|
else if (l2capinbuf[12] == interrupt_dcid[0] && l2capinbuf[13] == interrupt_dcid[1]) {
|
|
//Serial.print("\r\nHID Interrupt Configuration Request");
|
|
identifier = l2capinbuf[9];
|
|
l2cap_event_flag |= L2CAP_FLAG_CONFIG_INTERRUPT_REQUEST;
|
|
}
|
|
}
|
|
else if (l2capinbuf[8] == L2CAP_CMD_DISCONNECT_REQUEST) {
|
|
if (l2capinbuf[12] == control_dcid[0] && l2capinbuf[13] == control_dcid[1]) {
|
|
#ifdef DEBUG
|
|
Notify(PSTR("\r\nDisconnect Request: Control Channel"));
|
|
#endif
|
|
identifier = l2capinbuf[9];
|
|
pBtd->l2cap_disconnection_response(hci_handle,identifier,control_dcid,control_scid);
|
|
l2cap_event_flag = 0; // Reset flags
|
|
l2cap_state = L2CAP_EV_WAIT;
|
|
}
|
|
else if (l2capinbuf[12] == interrupt_dcid[0] && l2capinbuf[13] == interrupt_dcid[1]) {
|
|
#ifdef DEBUG
|
|
Notify(PSTR("\r\nDisconnect Request: Interrupt Channel"));
|
|
#endif
|
|
identifier = l2capinbuf[9];
|
|
pBtd->l2cap_disconnection_response(hci_handle,identifier,interrupt_dcid,interrupt_scid);
|
|
l2cap_event_flag = 0; // Reset flags
|
|
l2cap_state = L2CAP_EV_WAIT;
|
|
}
|
|
}
|
|
else if (l2capinbuf[8] == L2CAP_CMD_DISCONNECT_RESPONSE) {
|
|
if (l2capinbuf[12] == control_scid[0] && l2capinbuf[13] == control_scid[1]) {
|
|
//Serial.print("\r\nDisconnect Response: Control Channel");
|
|
identifier = l2capinbuf[9];
|
|
l2cap_event_flag |= L2CAP_FLAG_DISCONNECT_CONTROL_RESPONSE;
|
|
}
|
|
else if (l2capinbuf[12] == interrupt_scid[0] && l2capinbuf[13] == interrupt_scid[1]) {
|
|
//Serial.print("\r\nDisconnect Response: Interrupt Channel");
|
|
identifier = l2capinbuf[9];
|
|
l2cap_event_flag |= L2CAP_FLAG_DISCONNECT_INTERRUPT_RESPONSE;
|
|
}
|
|
}
|
|
#ifdef EXTRADEBUG
|
|
else {
|
|
Notify(PSTR("\r\nL2CAP Unknown Signaling Command: "));
|
|
PrintHex<uint8_t>(l2capinbuf[8]);
|
|
}
|
|
#endif
|
|
} else if (l2capinbuf[6] == interrupt_dcid[0] && l2capinbuf[7] == interrupt_dcid[1]) { // l2cap_interrupt
|
|
//Serial.print("\r\nL2CAP Interrupt");
|
|
if(PS3Connected || PS3MoveConnected || PS3NavigationConnected) {
|
|
/* Read Report */
|
|
if(l2capinbuf[8] == 0xA1) // HID_THDR_DATA_INPUT
|
|
{
|
|
if(PS3Connected || PS3NavigationConnected)
|
|
ButtonState = (uint32_t)(l2capinbuf[11] | ((uint16_t)l2capinbuf[12] << 8) | ((uint32_t)l2capinbuf[13] << 16));
|
|
else if(PS3MoveConnected)
|
|
ButtonState = (uint32_t)(l2capinbuf[10] | ((uint16_t)l2capinbuf[11] << 8) | ((uint32_t)l2capinbuf[12] << 16));
|
|
|
|
//Notify(PSTR("\r\nButtonState");
|
|
//PrintHex<uint32_t>(ButtonState);
|
|
|
|
if(ButtonState != OldButtonState)
|
|
{
|
|
buttonChanged = true;
|
|
if(ButtonState != 0x00) {
|
|
buttonPressed = true;
|
|
buttonReleased = false;
|
|
} else {
|
|
buttonPressed = false;
|
|
buttonReleased = true;
|
|
}
|
|
}
|
|
|
|
else
|
|
{
|
|
buttonChanged = false;
|
|
buttonPressed = false;
|
|
buttonReleased = false;
|
|
}
|
|
|
|
OldButtonState = ButtonState;
|
|
}
|
|
#ifdef PRINTREPORT // Uncomment "#define PRINTREPORT" to print the report send by the PS3 Controllers
|
|
if(l2capinbuf[8] == 0xA1) { //HID_THDR_DATA_INPUT
|
|
for(uint8_t i = 10; i < 58;i++) {
|
|
PrintHex<uint8_t>(l2capinbuf[i]);
|
|
Serial.print(" ");
|
|
}
|
|
Serial.println();
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
}
|
|
}
|
|
void PS3BT::Poll() {
|
|
switch (l2cap_state) {
|
|
case L2CAP_EV_WAIT:
|
|
if (l2cap_connection_request_control_flag) {
|
|
#ifdef DEBUG
|
|
Notify(PSTR("\r\nHID Control Incoming Connection Request"));
|
|
#endif
|
|
pBtd->l2cap_connection_response(hci_handle,identifier, control_dcid, control_scid, PENDING);
|
|
delay(1);
|
|
pBtd->l2cap_connection_response(hci_handle,identifier, control_dcid, control_scid, SUCCESSFUL);
|
|
identifier++;
|
|
delay(1);
|
|
pBtd->l2cap_config_request(hci_handle,identifier, control_scid);
|
|
l2cap_state = L2CAP_EV_CONTROL_REQUEST;
|
|
}
|
|
break;
|
|
case L2CAP_EV_CONTROL_REQUEST:
|
|
if (l2cap_config_request_control_flag) {
|
|
#ifdef DEBUG
|
|
Notify(PSTR("\r\nHID Control Configuration Request"));
|
|
#endif
|
|
pBtd->l2cap_config_response(hci_handle,identifier, control_scid);
|
|
l2cap_state = L2CAP_EV_CONTROL_SUCCESS;
|
|
}
|
|
break;
|
|
|
|
case L2CAP_EV_CONTROL_SUCCESS:
|
|
if (l2cap_config_success_control_flag) {
|
|
#ifdef DEBUG
|
|
Notify(PSTR("\r\nHID Control Successfully Configured"));
|
|
#endif
|
|
l2cap_state = L2CAP_EV_INTERRUPT_SETUP;
|
|
}
|
|
break;
|
|
case L2CAP_EV_INTERRUPT_SETUP:
|
|
if (l2cap_connection_request_interrupt_flag) {
|
|
#ifdef DEBUG
|
|
Notify(PSTR("\r\nHID Interrupt Incoming Connection Request"));
|
|
#endif
|
|
pBtd->l2cap_connection_response(hci_handle,identifier, interrupt_dcid, interrupt_scid, PENDING);
|
|
delay(1);
|
|
pBtd->l2cap_connection_response(hci_handle,identifier, interrupt_dcid, interrupt_scid, SUCCESSFUL);
|
|
identifier++;
|
|
delay(1);
|
|
pBtd->l2cap_config_request(hci_handle,identifier, interrupt_scid);
|
|
|
|
l2cap_state = L2CAP_EV_INTERRUPT_REQUEST;
|
|
}
|
|
break;
|
|
case L2CAP_EV_INTERRUPT_REQUEST:
|
|
if (l2cap_config_request_interrupt_flag) {
|
|
#ifdef DEBUG
|
|
Notify(PSTR("\r\nHID Interrupt Configuration Request"));
|
|
#endif
|
|
pBtd->l2cap_config_response(hci_handle,identifier, interrupt_scid);
|
|
l2cap_state = L2CAP_EV_INTERRUPT_SUCCESS;
|
|
}
|
|
break;
|
|
case L2CAP_EV_INTERRUPT_SUCCESS:
|
|
if (l2cap_config_success_interrupt_flag) {
|
|
#ifdef DEBUG
|
|
Notify(PSTR("\r\nHID Interrupt Successfully Configured"));
|
|
#endif
|
|
if(remote_name[0] == 'M') { // First letter in Motion Controller ('M')
|
|
for (uint8_t i = 0; i < BULK_MAXPKTSIZE; i++) // Reset l2cap in buffer as it sometimes read it as a button has been pressed
|
|
l2capinpointer[i] = 0;
|
|
ButtonState = 0;
|
|
OldButtonState = 0;
|
|
|
|
l2cap_state = L2CAP_EV_HID_PS3_LED;
|
|
} else
|
|
l2cap_state = L2CAP_EV_HID_ENABLE_SIXAXIS;
|
|
timer = millis();
|
|
}
|
|
break;
|
|
case L2CAP_EV_HID_ENABLE_SIXAXIS:
|
|
if(millis() - timer > 1000) { // loop 1 second before sending the command
|
|
for (uint8_t i = 0; i < BULK_MAXPKTSIZE; i++) // Reset l2cap in buffer as it sometimes read it as a button has been pressed
|
|
l2capinpointer[i] = 0;
|
|
ButtonState = 0;
|
|
OldButtonState = 0;
|
|
|
|
enable_sixaxis();
|
|
for (uint8_t i = 15; i < 19; i++)
|
|
l2capinpointer[i] = 0x7F; // Set the analog joystick values to center position
|
|
l2cap_state = L2CAP_EV_HID_PS3_LED;
|
|
timer = millis();
|
|
}
|
|
break;
|
|
|
|
case L2CAP_EV_HID_PS3_LED:
|
|
if(millis() - timer > 1000) { // loop 1 second before sending the command
|
|
if (remote_name[0] == 'P') { // First letter in PLAYSTATION(R)3 Controller ('P')
|
|
setLedOn(LED1);
|
|
#ifdef DEBUG
|
|
Notify(PSTR("\r\nDualshock 3 Controller Enabled\r\n"));
|
|
#endif
|
|
PS3Connected = true;
|
|
} else if (remote_name[0] == 'N') { // First letter in Navigation Controller ('N')
|
|
setLedOn(LED1); // This just turns LED constantly on, on the Navigation controller
|
|
#ifdef DEBUG
|
|
Notify(PSTR("\r\nNavigation Controller Enabled\r\n"));
|
|
#endif
|
|
PS3NavigationConnected = true;
|
|
} else if(remote_name[0] == 'M') { // First letter in Motion Controller ('M')
|
|
moveSetBulb(Red);
|
|
timerBulbRumble = millis();
|
|
#ifdef DEBUG
|
|
Notify(PSTR("\r\nMotion Controller Enabled\r\n"));
|
|
#endif
|
|
PS3MoveConnected = true;
|
|
}
|
|
l2cap_state = L2CAP_EV_DONE;
|
|
}
|
|
break;
|
|
|
|
case L2CAP_EV_DONE:
|
|
if (PS3MoveConnected)//The Bulb and rumble values, has to be send at aproximatly every 5th second for it to stay on
|
|
{
|
|
if (millis() - timerBulbRumble > 4000)//Send at least every 4th second
|
|
{
|
|
HIDMove_Command(HIDMoveBuffer, HID_BUFFERSIZE);//The Bulb and rumble values, has to be written again and again, for it to stay turned on
|
|
timerBulbRumble = millis();
|
|
}
|
|
}
|
|
break;
|
|
|
|
case L2CAP_EV_INTERRUPT_DISCONNECT:
|
|
if (l2cap_disconnect_response_interrupt_flag) {
|
|
#ifdef DEBUG
|
|
Notify(PSTR("\r\nDisconnected Interrupt Channel"));
|
|
#endif
|
|
identifier++;
|
|
pBtd->l2cap_disconnection_request(hci_handle, identifier, control_scid, control_dcid);
|
|
l2cap_event_flag = 0; // Reset flags
|
|
l2cap_state = L2CAP_EV_CONTROL_DISCONNECT;
|
|
}
|
|
break;
|
|
|
|
case L2CAP_EV_CONTROL_DISCONNECT:
|
|
if (l2cap_disconnect_response_control_flag) {
|
|
#ifdef DEBUG
|
|
Notify(PSTR("\r\nDisconnected Control Channel"));
|
|
#endif
|
|
pBtd->hci_disconnect(hci_handle);
|
|
l2cap_state = L2CAP_EV_WAIT;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
/************************************************************/
|
|
/* HID Commands */
|
|
/************************************************************/
|
|
|
|
//Playstation Sixaxis Dualshock and Navigation Controller commands
|
|
void PS3BT::HID_Command(uint8_t* data, uint8_t nbytes) {
|
|
if (millis() - timerHID <= 250)// Check if is has been more than 250ms since last command
|
|
delay((uint32_t)(250 - (millis() - timerHID)));//There have to be a delay between commands
|
|
pBtd->L2CAP_Command(hci_handle,data,nbytes,control_scid[0],control_scid[1]); // Both the Navigation and Dualshock controller sends data via the controller channel
|
|
timerHID = millis();
|
|
}
|
|
void PS3BT::setAllOff() {
|
|
for (uint8_t i = 0; i < OUTPUT_REPORT_BUFFER_SIZE; i++)
|
|
HIDBuffer[i + 2] = pgm_read_byte(&OUTPUT_REPORT_BUFFER[i]);//First two bytes reserved for report type and ID
|
|
|
|
HID_Command(HIDBuffer, HID_BUFFERSIZE);
|
|
}
|
|
void PS3BT::setRumbleOff() {
|
|
HIDBuffer[3] = 0x00;
|
|
HIDBuffer[4] = 0x00;//low mode off
|
|
HIDBuffer[5] = 0x00;
|
|
HIDBuffer[6] = 0x00;//high mode off
|
|
|
|
HID_Command(HIDBuffer, HID_BUFFERSIZE);
|
|
}
|
|
void PS3BT::setRumbleOn(Rumble mode) {
|
|
/* Still not totally sure how it works, maybe something like this instead?
|
|
* 3 - duration_right
|
|
* 4 - power_right
|
|
* 5 - duration_left
|
|
* 6 - power_left
|
|
*/
|
|
if ((mode & 0x30) > 0)
|
|
{
|
|
HIDBuffer[3] = 0xfe;
|
|
HIDBuffer[5] = 0xfe;
|
|
|
|
if (mode == RumbleHigh)
|
|
{
|
|
HIDBuffer[4] = 0;//low mode off
|
|
HIDBuffer[6] = 0xff;//high mode on
|
|
}
|
|
else
|
|
{
|
|
HIDBuffer[4] = 0xff;//low mode on
|
|
HIDBuffer[6] = 0;//high mode off
|
|
}
|
|
|
|
HID_Command(HIDBuffer, HID_BUFFERSIZE);
|
|
}
|
|
}
|
|
void PS3BT::setLedOff(LED a) {
|
|
HIDBuffer[11] &= ~((uint8_t)(((uint16_t)a & 0x0f) << 1));
|
|
HID_Command(HIDBuffer, HID_BUFFERSIZE);
|
|
}
|
|
void PS3BT::setLedOn(LED a) {
|
|
HIDBuffer[11] |= (uint8_t)(((uint16_t)a & 0x0f) << 1);
|
|
HID_Command(HIDBuffer, HID_BUFFERSIZE);
|
|
}
|
|
void PS3BT::setLedToggle(LED a) {
|
|
HIDBuffer[11] ^= (uint8_t)(((uint16_t)a & 0x0f) << 1);
|
|
HID_Command(HIDBuffer, HID_BUFFERSIZE);
|
|
}
|
|
void PS3BT::enable_sixaxis() { //Command used to enable the Dualshock 3 and Navigation controller to send data via USB
|
|
uint8_t cmd_buf[6];
|
|
cmd_buf[0] = 0x53;// HID BT Set_report (0x50) | Report Type (Feature 0x03)
|
|
cmd_buf[1] = 0xF4;// Report ID
|
|
cmd_buf[2] = 0x42;// Special PS3 Controller enable commands
|
|
cmd_buf[3] = 0x03;
|
|
cmd_buf[4] = 0x00;
|
|
cmd_buf[5] = 0x00;
|
|
|
|
HID_Command(cmd_buf, 6);
|
|
}
|
|
|
|
//Playstation Move Controller commands
|
|
void PS3BT::HIDMove_Command(uint8_t* data,uint8_t nbytes) {
|
|
if (millis() - timerHID <= 250)// Check if is has been less than 200ms since last command
|
|
delay((uint32_t)(250 - (millis() - timerHID)));//There have to be a delay between commands
|
|
pBtd->L2CAP_Command(hci_handle,data,nbytes,interrupt_scid[0],interrupt_scid[1]); // The Move controller sends it's data via the intterrupt channel
|
|
timerHID = millis();
|
|
}
|
|
void PS3BT::moveSetBulb(uint8_t r, uint8_t g, uint8_t b) { //Use this to set the Color using RGB values
|
|
//set the Bulb's values into the write buffer
|
|
HIDMoveBuffer[3] = r;
|
|
HIDMoveBuffer[4] = g;
|
|
HIDMoveBuffer[5] = b;
|
|
|
|
HIDMove_Command(HIDMoveBuffer, HID_BUFFERSIZE);
|
|
}
|
|
void PS3BT::moveSetBulb(Colors color) { //Use this to set the Color using the predefined colors in enum
|
|
moveSetBulb((uint8_t)(color >> 16),(uint8_t)(color >> 8),(uint8_t)(color));
|
|
}
|
|
void PS3BT::moveSetRumble(uint8_t rumble) {
|
|
#ifdef DEBUG
|
|
if(rumble < 64 && rumble != 0) // The rumble value has to at least 64, or approximately 25% (64/255*100)
|
|
Notify(PSTR("\r\nThe rumble value has to at least 64, or approximately 25%"));
|
|
#endif
|
|
//set the rumble value into the write buffer
|
|
HIDMoveBuffer[7] = rumble;
|
|
|
|
HIDMove_Command(HIDMoveBuffer, HID_BUFFERSIZE);
|
|
} |