specchioriflesso/USB_Host_Shield_2.0
1
Fork 0
mirror of https://github.com/felis/USB_Host_Shield_2.0.git synced 2024-03-22 11:31:26 +01:00
Code Issues Projects Releases Packages Wiki Activity
USB_Host_Shield_2.0/PS3BT.h
Kristian Lauszus b8a17e62bb Added PS3 BT support
2012-03-02 08:34:29 +01:00

441 lines
No EOL
15 KiB
C++
Raw Blame History

/* Copyright (C) 2011 TKJ Electronics. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
TKJ Electronics
Web : http://www.tkjelectronics.com
e-mail : mail@tkjelectronics.com
*/
#ifndef _ps3bt_h_
#define _ps3bt_h_
#if defined(ARDUINO) && ARDUINO >= 100
#include "Arduino.h"
#else
#include "WProgram.h"
#endif
#include "Usb.h"
/*The application will work in reduced host mode, so we can save program and data
memory space. After verifying the PID and VID we will use known values for the
configuration values for device, interface, endpoints and HID */
/* CSR Bluetooth data taken from descriptors */
#define INT_MAXPKTSIZE 16 // max size for HCI data
#define BULK_MAXPKTSIZE 64 // max size for ACL data
/* PS3 data taken from descriptors */
#define EP_MAXPKTSIZE 64 // max size for data via USB
/* Endpoint types */
#define EP_INTERRUPT 0x03
#define EP_BULK 0x02
#define CSR_CONTROL_PIPE 0 // names we give to the 4 pipes
#define CSR_EVENT_PIPE 1
#define CSR_DATAIN_PIPE 2
#define CSR_DATAOUT_PIPE 3
#define PS3_CONTROL_PIPE 0 // names we give to the 3 pipes
#define PS3_OUTPUT_PIPE 1
#define PS3_INPUT_PIPE 2
//PID and VID of the different devices
#define CSR_VID 0x0A12 //Cambridge Silicon Radio Ltd.
#define CSR_PID 0x0001 //Bluetooth HCI Device
#define PS3_VID 0x054C //Sony Corporation
#define PS3_PID 0x0268 //PS3 Controller DualShock 3
#define PS3NAVIGATION_VID 0x054C //Sony Corporation
#define PS3NAVIGATION_PID 0x042F //Navigation controller
#define PS3MOVE_VID 0x054C //Sony Corporation
#define PS3MOVE_PID 0x03D5 //Motion controller
#define HIDMOVEBUFFERSIZE 50 // size of the buffer for the Playstation Motion Controller
#define OUTPUT_REPORT_BUFFER_SIZE 48 //Size of the output report buffer for the controllers
// used in control endpoint header for HCI Commands
#define bmREQ_HCI_OUT USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_DEVICE
// used in control endpoint header for HID Commands
#define bmREQ_HIDOUT USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_INTERFACE
#define HID_REQUEST_SET_REPORT 0x09
/* Bluetooth HCI states for hci_task() */
#define HCI_INIT_STATE 0
#define HCI_RESET_STATE 1
#define HCI_BDADDR_STATE 2
#define HCI_SCANNING_STATE 3
#define HCI_CONNECT_IN_STATE 4
#define HCI_REMOTE_NAME_STATE 5
#define HCI_CONNECTED_STATE 6
#define HCI_DISABLE_SCAN 7
#define HCI_DONE_STATE 8
#define HCI_DISCONNECT_STATE 9
/* HCI event flags*/
#define HCI_FLAG_CMD_COMPLETE 0x01
#define HCI_FLAG_CMD_STATUS 0x02
#define HCI_FLAG_CONN_COMPLETE 0x04
#define HCI_FLAG_DISCONN_COMPLETE 0x08
#define HCI_FLAG_CONNECT_OK 0x10
#define HCI_FLAG_REMOTE_NAME_COMPLETE 0x20
#define HCI_FLAG_INCOMING_REQUEST 0x40
/*Macros for HCI event flag tests */
#define hci_cmd_complete (hci_event_flag & HCI_FLAG_CMD_COMPLETE)
#define hci_cmd_status (hci_event_flag & HCI_FLAG_CMD_STATUS)
#define hci_connect_complete (hci_event_flag & HCI_FLAG_CONN_COMPLETE)
#define hci_disconnect_complete (hci_event_flag & HCI_FLAG_DISCONN_COMPLETE)
#define hci_connect_ok (hci_event_flag & HCI_FLAG_CONNECT_OK)
#define hci_remote_name_complete (hci_event_flag & HCI_FLAG_REMOTE_NAME_COMPLETE)
#define hci_incoming_connect_request (hci_event_flag & HCI_FLAG_INCOMING_REQUEST)
/* HCI Events managed */
#define EV_COMMAND_COMPLETE 0x0E
#define EV_COMMAND_STATUS 0x0F
#define EV_CONNECT_COMPLETE 0x03
#define EV_DISCONNECT_COMPLETE 0x05
#define EV_NUM_COMPLETE_PKT 0x13
#define EV_INQUIRY_COMPLETE 0x01
#define EV_INQUIRY_RESULT 0x02
#define EV_REMOTE_NAME_COMPLETE 0x07
#define EV_INCOMING_CONNECT 0x04
#define EV_ROLE_CHANGED 0x12
/* Bluetooth L2CAP states for L2CAP_task() */
#define L2CAP_EV_WAIT 0
#define L2CAP_EV_CONTROL_SETUP 1
#define L2CAP_EV_CONTROL_REQUEST 2
#define L2CAP_EV_CONTROL_SUCCESS 3
#define L2CAP_EV_INTERRUPT_SETUP 4
#define L2CAP_EV_INTERRUPT_REQUEST 5
#define L2CAP_EV_INTERRUPT_SUCCESS 6
#define L2CAP_EV_HID_ENABLE_SIXAXIS 7
#define L2CAP_EV_L2CAP_DONE 8
#define L2CAP_EV_INTERRUPT_DISCONNECT 9
#define L2CAP_EV_CONTROL_DISCONNECT 10
/* L2CAP event flags */
#define L2CAP_EV_CONTROL_CONNECTION_REQUEST 0x01
#define L2CAP_EV_CONTROL_CONFIG_REQUEST 0x02
#define L2CAP_EV_CONTROL_CONFIG_SUCCESS 0x04
#define L2CAP_EV_INTERRUPT_CONNECTION_REQUEST 0x08
#define L2CAP_EV_INTERRUPT_CONFIG_REQUEST 0x10
#define L2CAP_EV_INTERRUPT_CONFIG_SUCCESS 0x20
#define L2CAP_EV_CONTROL_DISCONNECT_RESPONSE 0x40
#define L2CAP_EV_INTERRUPT_DISCONNECT_RESPONSE 0x80
/*Macros for L2CAP event flag tests */
#define l2cap_control_connection_request (l2cap_event_flag & L2CAP_EV_CONTROL_CONNECTION_REQUEST)
#define l2cap_control_config_request (l2cap_event_flag & L2CAP_EV_CONTROL_CONFIG_REQUEST)
#define l2cap_control_config_success (l2cap_event_flag & L2CAP_EV_CONTROL_CONFIG_SUCCESS)
#define l2cap_interrupt_connection_request (l2cap_event_flag & L2CAP_EV_INTERRUPT_CONNECTION_REQUEST)
#define l2cap_interrupt_config_request (l2cap_event_flag & L2CAP_EV_INTERRUPT_CONFIG_REQUEST)
#define l2cap_interrupt_config_success (l2cap_event_flag & L2CAP_EV_INTERRUPT_CONFIG_SUCCESS)
#define l2cap_control_disconnect_response (l2cap_event_flag & L2CAP_EV_CONTROL_DISCONNECT_RESPONSE)
#define l2cap_interrupt_disconnect_response (l2cap_event_flag & L2CAP_EV_INTERRUPT_DISCONNECT_RESPONSE)
/* L2CAP signaling commands */
#define L2CAP_CMD_COMMAND_REJECT 0x01
#define L2CAP_CMD_CONNECTION_REQUEST 0x02
#define L2CAP_CMD_CONNECTION_RESPONSE 0x03
#define L2CAP_CMD_CONFIG_REQUEST 0x04
#define L2CAP_CMD_CONFIG_RESPONSE 0x05
#define L2CAP_CMD_DISCONNECT_REQUEST 0x06
#define L2CAP_CMD_DISCONNECT_RESPONSE 0x07
/* Bluetooth L2CAP PSM */
#define L2CAP_PSM_HID_CTRL 0x11 // HID_Control
#define L2CAP_PSM_HID_INTR 0x13 // HID_Interrupt
// Used For Connection Response - Remember to Include High Byte
#define PENDING 0x01
#define SUCCESSFUL 0x00
#define bConfigurationValue 0x01 // Used to set configuration
#define PS3_MAX_ENDPOINTS 4
enum LED
{
LED1 = 0x01,
LED2 = 0x02,
LED3 = 0x04,
LED4 = 0x08,
LED5 = 0x09,
LED6 = 0x0A,
LED7 = 0x0C,
LED8 = 0x0D,
LED9 = 0x0E,
LED10 = 0x0F,
};
enum Colors
{
//Used to set the colors of the move controller
Red = 0xFF0000,//((255 << 16) | (0 << 8) | 0);
Green = 0xFF00,//((0 << 16) | (255 << 8) | 0);
Blue = 0xFF,//((0 << 16) | (0 << 8) | 255);
Yellow = 0xFFEB04,//((255 << 16) | (235 << 8) | 4);
Lightblue = 0xFFFF,//((0 << 16) | (255 << 8) | 255);
Purble = 0xFF00FF,//((255 << 16) | (0 << 8) | 255);
White = 0xFFFFFF,//((255 << 16) | (255 << 8) | 255);
Off = 0x00,//((0 << 16) | (0 << 8) | 0);
};
enum Button
{
// byte location | bit location
//Sixaxis Dualshcock 3 & Navigation controller
SELECT = (11 << 8) | 0x01,
L3 = (11 << 8) | 0x02,
R3 = (11 << 8) | 0x04,
START = (11 << 8) | 0x08,
UP = (11 << 8) | 0x10,
RIGHT = (11 << 8) | 0x20,
DOWN = (11 << 8) | 0x40,
LEFT = (11 << 8) | 0x80,
L2 = (12 << 8) | 0x01,
R2 = (12 << 8) | 0x02,
L1 = (12 << 8) | 0x04,
R1 = (12 << 8) | 0x08,
TRIANGLE = (12 << 8) | 0x10,
CIRCLE = (12 << 8) | 0x20,
CROSS = (12 << 8) | 0x40,
SQUARE = (12 << 8) | 0x80,
PS = (13 << 8) | 0x01,
//Playstation Move Controller
SELECT_MOVE = (10 << 8) | 0x01,
START_MOVE = (10 << 8) | 0x08,
TRIANGLE_MOVE = (11 << 8) | 0x10,
CIRCLE_MOVE = (11 << 8) | 0x20,
CROSS_MOVE = (11 << 8) | 0x40,
SQUARE_MOVE = (11 << 8) | 0x80,
PS_MOVE = (12 << 8) | 0x01,
MOVE_MOVE = (12 << 8) | 0x08,//covers 12 bits - we only need to read the top 8
T_MOVE = (12 << 8) | 0x10,//covers 12 bits - we only need to read the top 8
};
enum AnalogButton
{
//Sixaxis Dualshcock 3 & Navigation controller
UP_ANALOG = 23,
RIGHT_ANALOG = 24,
DOWN_ANALOG = 25,
LEFT_ANALOG = 26,
L2_ANALOG = 27,
R2_ANALOG = 28,
L1_ANALOG = 29,
R1_ANALOG = 30,
TRIANGLE_ANALOG = 31,
CIRCLE_ANALOG = 32,
CROSS_ANALOG = 33,
SQUARE_ANALOG = 34,
//Playstation Move Controller
T_MOVE_ANALOG = 15,//Both at byte 14 (last reading) and byte 15 (current reading)
};
enum AnalogHat
{
LeftHatX = 15,
LeftHatY = 16,
RightHatX = 17,
RightHatY = 18,
};
enum Sensor
{
//Sensors inside the Sixaxis Dualshock 3 controller
aX = 50,
aY = 52,
aZ = 54,
gZ = 56,
//Sensors inside the move motion controller - it only reads the 2nd frame
aXmove = 28,
aZmove = 30,
aYmove = 32,
gXmove = 40,
gZmove = 42,
gYmove = 44,
tempMove = 46,
mXmove = 47,
mZmove = 49,
mYmove = 50,
};
enum Angle
{
Pitch = 0x01,
Roll = 0x02,
};
enum Status
{
// byte location | bit location
Plugged = (38 << 8) | 0x02,
Unplugged = (38 << 8) | 0x03,
Charging = (39 << 8) | 0xEE,
NotCharging = (39 << 8) | 0xF1,
Shutdown = (39 << 8) | 0x01,
Dying = (39 << 8) | 0x02,
Low = (39 << 8) | 0x03,
High = (39 << 8) | 0x04,
Full = (39 << 8) | 0x05,
MoveCharging = (21 << 8) | 0xEE,
MoveNotCharging = (21 << 8) | 0xF1,
MoveShutdown = (21 << 8) | 0x01,
MoveDying = (21 << 8) | 0x02,
MoveLow = (21 << 8) | 0x03,
MoveHigh = (21 << 8) | 0x04,
MoveFull = (21 << 8) | 0x05,
CableRumble = (40 << 8) | 0x10,//Opperating by USB and rumble is turned on
Cable = (40 << 8) | 0x12,//Opperating by USB and rumble is turned off
BluetoothRumble = (40 << 8) | 0x14,//Opperating by bluetooth and rumble is turned on
Bluetooth = (40 << 8) | 0x16,//Opperating by bluetooth and rumble is turned off
};
enum Rumble
{
RumbleHigh = 0x10,
RumbleLow = 0x20,
};
class PS3BT : public USBDeviceConfig
{
public:
PS3BT(USB *pUsb);
// USBDeviceConfig implementation
virtual uint8_t Init(uint8_t parent, uint8_t port, bool lowspeed);
virtual uint8_t Release();
virtual uint8_t Poll();
virtual uint8_t GetAddress() { return bAddress; };
void setBdaddr(uint8_t* BDADDR);
void setMoveBdaddr(uint8_t* BDADDR);
/* PS3 Controller Commands */
bool getButton(Button b);
uint8_t getAnalogButton(AnalogButton a);
uint8_t getAnalogHat(AnalogHat a);
uint32_t getSensor(Sensor a);
double getAngle(Angle a, boolean resolution);
bool getStatus(Status c);
String getStatusString();
void disconnect(); // use this void to disconnect any of the controllers
/* HID Commands */
/* Commands for Dualshock 3 and Navigation controller */
void setAllOff();
void setRumbleOff();
void setRumbleOn(Rumble mode);
void setLedOff(LED a);
void setLedOn(LED a);
/* Commands for Motion controller only */
void moveSetBulb(uint8_t r, uint8_t g, uint8_t b);//Use this to set the Color using RGB values
void moveSetBulb(Colors color);//Use this to set the Color using the predefined colors in "enum Colors"
void moveSetRumble(uint8_t rumble);
bool PS3BTConnected;// Variable used to indicate if the normal playstation controller is successfully connected
bool PS3MoveBTConnected;// Variable used to indicate if the move controller is successfully connected
bool PS3NavigationBTConnected;// Variable used to indicate if the navigation controller is successfully connected
bool ButtonChanged;//Indicate if a button has been changed
bool ButtonPressed;//Indicate if a button has been pressed
protected:
/* mandatory members */
USB *pUsb;
uint8_t bAddress;
EpInfo epInfo[PS3_MAX_ENDPOINTS]; //endpoint info structure
private:
bool bPollEnable;
/*variables filled from HCI event management */
int16_t hci_handle;
uint8_t disc_bdaddr[6]; // maximum of three discovered devices
uint8_t remote_name[30]; // first 30 chars of remote name
/* variables used by high level HCI task */
uint8_t hci_state; //current state of bluetooth hci connection
uint16_t hci_counter; // counter used for bluetooth hci reset loops
uint16_t hci_event_flag;// hci flags of received bluetooth events
/* variables used by high level L2CAP task */
uint8_t l2cap_state;
uint16_t l2cap_event_flag;// l2cap flags of received bluetooth events
uint32_t ButtonState;
uint32_t OldButtonState;
uint32_t timerHID;// timer used see if there has to be a delay before a new HID command
uint32_t dtimeHID;// delta time since last HID command
uint32_t timerBulbRumble;// used to continuously set PS3 Move controller Bulb and rumble values
uint32_t dtimeBulbRumble;// used to know how longs since last since the Bulb and rumble values was written
uint8_t my_bdaddr[6]; //Change to your dongles Bluetooth address in PS3BT.cpp
uint8_t hcibuf[BULK_MAXPKTSIZE];//General purpose buffer for hci data
uint8_t l2capinbuf[BULK_MAXPKTSIZE];//General purpose buffer for l2cap in data
uint8_t l2capoutbuf[BULK_MAXPKTSIZE];//General purpose buffer for l2cap out data
uint8_t HIDBuffer[BULK_MAXPKTSIZE];// Used to store HID commands
uint8_t HIDMoveBuffer[HIDMOVEBUFFERSIZE];// Used to store HID commands for the Move controller
/* L2CAP Channels */
uint8_t control_scid[2];// L2CAP source CID for HID_Control
uint8_t control_dcid[2];//0x0040
uint8_t interrupt_scid[2];// L2CAP source CID for HID_Interrupt
uint8_t interrupt_dcid[2];//0x0041
uint8_t identifier;//Identifier for connection
void HCI_event_task(); //poll the HCI event pipe
void HCI_task(); // HCI state machine
void ACL_event_task(); // start polling the ACL input pipe too, though discard data until connected
void L2CAP_task(); // L2CAP state machine
void readReport(); // read incoming data
void printReport(); // print incoming date - Uncomment for debugging
/* HCI Commands */
void HCI_Command(uint8_t* data, uint16_t nbytes);
void hci_reset();
void hci_write_scan_enable();
void hci_write_scan_disable();
void hci_read_bdaddr();
void hci_accept_connection();
void hci_remote_name();
void hci_disconnect();
/* L2CAP Commands */
void L2CAP_Command(uint8_t* data, uint16_t nbytes);
void l2cap_connection_response(uint8_t rxid, uint8_t dcid[], uint8_t scid[], uint8_t result);
void l2cap_config_request(uint8_t rxid, uint8_t dcid[]);
void l2cap_config_response(uint8_t rxid, uint8_t scid[]);
void l2cap_disconnection_request(uint8_t rxid, uint8_t dcid[], uint8_t scid[]);
void l2cap_disconnection_response(uint8_t rxid, uint8_t dcid[], uint8_t scid[]);
/* HID Commands */
void HID_Command(uint8_t* data, uint16_t nbytes);
void HIDMove_Command(uint8_t* data, uint16_t nbytes);
void enable_sixaxis();//Command used to enable the Dualshock 3 and Navigation controller to send data via USB
};
#endif
Reference in a new issue View git blame Copy permalink