specchioriflesso/USB_Host_Shield_2.0
1
Fork 0
mirror of https://github.com/felis/USB_Host_Shield_2.0.git synced 2024-03-22 11:31:26 +01:00
Code Issues Projects Releases Packages Wiki Activity
USB_Host_Shield_2.0/Usb.cpp
Andrew J. Kroll 080a8e256d add reset on hub port
2013-06-17 15:02:37 -04:00

703 lines
29 KiB
C++
Raw Blame History

/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
/* USB functions */
#include "avrpins.h"
#include "max3421e.h"
#include "usbhost.h"
#include "Usb.h"
#if defined(ARDUINO) && ARDUINO >=100
#include "Arduino.h"
#else
#include <WProgram.h>
#endif
static uint8_t usb_error = 0;
static uint8_t usb_task_state;
/* constructor */
USB::USB() : bmHubPre(0) {
usb_task_state = USB_DETACHED_SUBSTATE_INITIALIZE; //set up state machine
init();
}
/* Initialize data structures */
void USB::init() {
devConfigIndex = 0;
bmHubPre = 0;
}
uint8_t USB::getUsbTaskState(void) {
return ( usb_task_state);
}
void USB::setUsbTaskState(uint8_t state) {
usb_task_state = state;
}
EpInfo* USB::getEpInfoEntry(uint8_t addr, uint8_t ep) {
UsbDevice *p = addrPool.GetUsbDevicePtr(addr);
if (!p || !p->epinfo)
return NULL;
EpInfo *pep = p->epinfo;
for (uint8_t i = 0; i < p->epcount; i++) {
if ((pep)->epAddr == ep)
return pep;
pep++;
}
return NULL;
}
/* set device table entry */
/* each device is different and has different number of endpoints. This function plugs endpoint record structure, defined in application, to devtable */
uint8_t USB::setEpInfoEntry(uint8_t addr, uint8_t epcount, EpInfo* eprecord_ptr) {
if (!eprecord_ptr)
return USB_ERROR_INVALID_ARGUMENT;
UsbDevice *p = addrPool.GetUsbDevicePtr(addr);
if (!p)
return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL;
p->address = addr;
p->epinfo = eprecord_ptr;
p->epcount = epcount;
return 0;
}
uint8_t USB::SetAddress(uint8_t addr, uint8_t ep, EpInfo **ppep, uint16_t &nak_limit) {
UsbDevice *p = addrPool.GetUsbDevicePtr(addr);
if (!p)
return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL;
if (!p->epinfo)
return USB_ERROR_EPINFO_IS_NULL;
*ppep = getEpInfoEntry(addr, ep);
if (!*ppep)
return USB_ERROR_EP_NOT_FOUND_IN_TBL;
nak_limit = (0x0001UL << (((*ppep)->bmNakPower > USB_NAK_MAX_POWER) ? USB_NAK_MAX_POWER : (*ppep)->bmNakPower));
nak_limit--;
/*
USBTRACE2("\r\nAddress: ", addr);
USBTRACE2(" EP: ", ep);
USBTRACE2(" NAK Power: ",(*ppep)->bmNakPower);
USBTRACE2(" NAK Limit: ", nak_limit);
USBTRACE("\r\n");
*/
regWr(rPERADDR, addr); //set peripheral address
uint8_t mode = regRd(rMODE);
// Set bmLOWSPEED and bmHUBPRE in case of low-speed device, reset them otherwise
regWr(rMODE, (p->lowspeed) ? mode | bmLOWSPEED | bmHubPre : mode & ~(bmHUBPRE | bmLOWSPEED));
return 0;
}
/* Control transfer. Sets address, endpoint, fills control packet with necessary data, dispatches control packet, and initiates bulk IN transfer, */
/* depending on request. Actual requests are defined as inlines */
/* return codes: */
/* 00 = success */
/* 01-0f = non-zero HRSLT */
uint8_t USB::ctrlReq(uint8_t addr, uint8_t ep, uint8_t bmReqType, uint8_t bRequest, uint8_t wValLo, uint8_t wValHi,
uint16_t wInd, uint16_t total, uint16_t nbytes, uint8_t* dataptr, USBReadParser *p) {
bool direction = false; //request direction, IN or OUT
uint8_t rcode;
SETUP_PKT setup_pkt;
EpInfo *pep = NULL;
uint16_t nak_limit = 0;
rcode = SetAddress(addr, ep, &pep, nak_limit);
if (rcode)
return rcode;
direction = ((bmReqType & 0x80) > 0);
/* fill in setup packet */
setup_pkt.ReqType_u.bmRequestType = bmReqType;
setup_pkt.bRequest = bRequest;
setup_pkt.wVal_u.wValueLo = wValLo;
setup_pkt.wVal_u.wValueHi = wValHi;
setup_pkt.wIndex = wInd;
setup_pkt.wLength = total;
bytesWr(rSUDFIFO, 8, (uint8_t*) & setup_pkt); //transfer to setup packet FIFO
rcode = dispatchPkt(tokSETUP, ep, nak_limit); //dispatch packet
if (rcode) //return HRSLT if not zero
return ( rcode);
if (dataptr != NULL) //data stage, if present
{
if (direction) //IN transfer
{
uint16_t left = total;
pep->bmRcvToggle = 1; //bmRCVTOG1;
while (left) {
// Bytes read into buffer
uint16_t read = nbytes;
//uint16_t read = (left<nbytes) ? left : nbytes;
rcode = InTransfer(pep, nak_limit, &read, dataptr);
if (rcode == hrTOGERR) {
// yes, we flip it wrong here so that next time it is actually correct!
pep->bmRcvToggle = (regRd(rHRSL) & bmSNDTOGRD) ? 0 : 1;
continue;
}
if (rcode)
return rcode;
// Invoke callback function if inTransfer completed successfully and callback function pointer is specified
if (!rcode && p)
((USBReadParser*)p)->Parse(read, dataptr, total - left);
left -= read;
if (read < nbytes)
break;
}
} else //OUT transfer
{
pep->bmSndToggle = 1; //bmSNDTOG1;
rcode = OutTransfer(pep, nak_limit, nbytes, dataptr);
}
if (rcode) //return error
return ( rcode);
}
// Status stage
return dispatchPkt((direction) ? tokOUTHS : tokINHS, ep, nak_limit); //GET if direction
}
/* IN transfer to arbitrary endpoint. Assumes PERADDR is set. Handles multiple packets if necessary. Transfers 'nbytes' bytes. */
/* Keep sending INs and writes data to memory area pointed by 'data' */
/* rcode 0 if no errors. rcode 01-0f is relayed from dispatchPkt(). Rcode f0 means RCVDAVIRQ error,
fe USB xfer timeout */
uint8_t USB::inTransfer(uint8_t addr, uint8_t ep, uint16_t *nbytesptr, uint8_t* data) {
EpInfo *pep = NULL;
uint16_t nak_limit = 0;
uint8_t rcode = SetAddress(addr, ep, &pep, nak_limit);
if (rcode) {
//printf("SetAddress Failed");
return rcode;
}
return InTransfer(pep, nak_limit, nbytesptr, data);
}
uint8_t USB::InTransfer(EpInfo *pep, uint16_t nak_limit, uint16_t *nbytesptr, uint8_t* data) {
uint8_t rcode = 0;
uint8_t pktsize;
uint16_t nbytes = *nbytesptr;
//printf("Requesting %i bytes ", nbytes);
uint8_t maxpktsize = pep->maxPktSize;
*nbytesptr = 0;
regWr(rHCTL, (pep->bmRcvToggle) ? bmRCVTOG1 : bmRCVTOG0); //set toggle value
while (1) // use a 'return' to exit this loop
{
rcode = dispatchPkt(tokIN, pep->epAddr, nak_limit); //IN packet to EP-'endpoint'. Function takes care of NAKS.
if (rcode == hrTOGERR) {
// yes, we flip it wrong here so that next time it is actually correct!
pep->bmRcvToggle = (regRd(rHRSL) & bmSNDTOGRD) ? 0 : 1;
regWr(rHCTL, (pep->bmRcvToggle) ? bmRCVTOG1 : bmRCVTOG0); //set toggle value
continue;
}
if (rcode) {
//printf(">>>>>>>> Problem! dispatchPkt %2.2x\r\n", rcode);
break; //should be 0, indicating ACK. Else return error code.
}
/* check for RCVDAVIRQ and generate error if not present */
/* the only case when absence of RCVDAVIRQ makes sense is when toggle error occurred. Need to add handling for that */
if ((regRd(rHIRQ) & bmRCVDAVIRQ) == 0) {
//printf(">>>>>>>> Problem! NO RCVDAVIRQ!\r\n");
rcode = 0xf0; //receive error
break;
}
pktsize = regRd(rRCVBC); //number of received bytes
//printf("Got %i bytes \r\n", pktsize);
// This would be OK, but...
//assert(pktsize <= nbytes);
if (pktsize > nbytes) {
// This can happen. Use of assert on Arduino locks up the Arduino.
// So I will trim the value, and hope for the best.
//printf(">>>>>>>> Problem! Wanted %i bytes but got %i.\r\n", nbytes, pktsize);
pktsize = nbytes;
}
int16_t mem_left = (int16_t)nbytes - *((int16_t*)nbytesptr);
if (mem_left < 0)
mem_left = 0;
data = bytesRd(rRCVFIFO, ((pktsize > mem_left) ? mem_left : pktsize), data);
regWr(rHIRQ, bmRCVDAVIRQ); // Clear the IRQ & free the buffer
*nbytesptr += pktsize; // add this packet's byte count to total transfer length
/* The transfer is complete under two conditions: */
/* 1. The device sent a short packet (L.T. maxPacketSize) */
/* 2. 'nbytes' have been transferred. */
if ((pktsize < maxpktsize) || (*nbytesptr >= nbytes)) // have we transferred 'nbytes' bytes?
{
// Save toggle value
pep->bmRcvToggle = ((regRd(rHRSL) & bmRCVTOGRD)) ? 1 : 0;
//printf("\r\n");
rcode = 0;
break;
} // if
} //while( 1 )
return ( rcode);
}
/* OUT transfer to arbitrary endpoint. Handles multiple packets if necessary. Transfers 'nbytes' bytes. */
/* Handles NAK bug per Maxim Application Note 4000 for single buffer transfer */
/* rcode 0 if no errors. rcode 01-0f is relayed from HRSL */
uint8_t USB::outTransfer(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* data) {
EpInfo *pep = NULL;
uint16_t nak_limit = 0;
uint8_t rcode = SetAddress(addr, ep, &pep, nak_limit);
if (rcode)
return rcode;
return OutTransfer(pep, nak_limit, nbytes, data);
}
uint8_t USB::OutTransfer(EpInfo *pep, uint16_t nak_limit, uint16_t nbytes, uint8_t *data) {
uint8_t rcode = hrSUCCESS, retry_count;
uint8_t *data_p = data; //local copy of the data pointer
uint16_t bytes_tosend, nak_count;
uint16_t bytes_left = nbytes;
uint8_t maxpktsize = pep->maxPktSize;
if (maxpktsize < 1 || maxpktsize > 64)
return USB_ERROR_INVALID_MAX_PKT_SIZE;
unsigned long timeout = millis() + USB_XFER_TIMEOUT;
regWr(rHCTL, (pep->bmSndToggle) ? bmSNDTOG1 : bmSNDTOG0); //set toggle value
while (bytes_left) {
retry_count = 0;
nak_count = 0;
bytes_tosend = (bytes_left >= maxpktsize) ? maxpktsize : bytes_left;
bytesWr(rSNDFIFO, bytes_tosend, data_p); //filling output FIFO
regWr(rSNDBC, bytes_tosend); //set number of bytes
regWr(rHXFR, (tokOUT | pep->epAddr)); //dispatch packet
while (!(regRd(rHIRQ) & bmHXFRDNIRQ)); //wait for the completion IRQ
regWr(rHIRQ, bmHXFRDNIRQ); //clear IRQ
rcode = (regRd(rHRSL) & 0x0f);
while (rcode && (timeout > millis())) {
switch (rcode) {
case hrNAK:
nak_count++;
if (nak_limit && (nak_count == nak_limit))
goto breakout;
//return ( rcode);
break;
case hrTIMEOUT:
retry_count++;
if (retry_count == USB_RETRY_LIMIT)
goto breakout;
//return ( rcode);
break;
case hrTOGERR:
// yes, we flip it wrong here so that next time it is actually correct!
pep->bmSndToggle = (regRd(rHRSL) & bmSNDTOGRD) ? 0 : 1;
regWr(rHCTL, (pep->bmSndToggle) ? bmSNDTOG1 : bmSNDTOG0); //set toggle value
break;
default:
goto breakout;
}//switch( rcode
/* process NAK according to Host out NAK bug */
regWr(rSNDBC, 0);
regWr(rSNDFIFO, *data_p);
regWr(rSNDBC, bytes_tosend);
regWr(rHXFR, (tokOUT | pep->epAddr)); //dispatch packet
while (!(regRd(rHIRQ) & bmHXFRDNIRQ)); //wait for the completion IRQ
regWr(rHIRQ, bmHXFRDNIRQ); //clear IRQ
rcode = (regRd(rHRSL) & 0x0f);
}//while( rcode && ....
bytes_left -= bytes_tosend;
data_p += bytes_tosend;
}//while( bytes_left...
breakout:
pep->bmSndToggle = (regRd(rHRSL) & bmSNDTOGRD) ? 1 : 0; //bmSNDTOG1 : bmSNDTOG0; //update toggle
return ( rcode); //should be 0 in all cases
}
/* dispatch USB packet. Assumes peripheral address is set and relevant buffer is loaded/empty */
/* If NAK, tries to re-send up to nak_limit times */
/* If nak_limit == 0, do not count NAKs, exit after timeout */
/* If bus timeout, re-sends up to USB_RETRY_LIMIT times */
/* return codes 0x00-0x0f are HRSLT( 0x00 being success ), 0xff means timeout */
uint8_t USB::dispatchPkt(uint8_t token, uint8_t ep, uint16_t nak_limit) {
unsigned long timeout = millis() + USB_XFER_TIMEOUT;
uint8_t tmpdata;
uint8_t rcode = hrSUCCESS;
uint8_t retry_count = 0;
uint16_t nak_count = 0;
while (timeout > millis()) {
regWr(rHXFR, (token | ep)); //launch the transfer
rcode = USB_ERROR_TRANSFER_TIMEOUT;
while (timeout > millis()) //wait for transfer completion
{
tmpdata = regRd(rHIRQ);
if (tmpdata & bmHXFRDNIRQ) {
regWr(rHIRQ, bmHXFRDNIRQ); //clear the interrupt
rcode = 0x00;
break;
}//if( tmpdata & bmHXFRDNIRQ
}//while ( millis() < timeout
//if (rcode != 0x00) //exit if timeout
// return ( rcode);
rcode = (regRd(rHRSL) & 0x0f); //analyze transfer result
switch (rcode) {
case hrNAK:
nak_count++;
if (nak_limit && (nak_count == nak_limit))
return (rcode);
break;
case hrTIMEOUT:
retry_count++;
if (retry_count == USB_RETRY_LIMIT)
return (rcode);
break;
default:
return (rcode);
}//switch( rcode
}//while( timeout > millis()
return ( rcode);
}
/* USB main task. Performs enumeration/cleanup */
void USB::Task(void) //USB state machine
{
uint8_t rcode;
uint8_t tmpdata;
static unsigned long delay = 0;
//USB_DEVICE_DESCRIPTOR buf;
bool lowspeed = false;
MAX3421E::Task();
tmpdata = getVbusState();
/* modify USB task state if Vbus changed */
switch (tmpdata) {
case SE1: //illegal state
usb_task_state = USB_DETACHED_SUBSTATE_ILLEGAL;
lowspeed = false;
break;
case SE0: //disconnected
if ((usb_task_state & USB_STATE_MASK) != USB_STATE_DETACHED)
usb_task_state = USB_DETACHED_SUBSTATE_INITIALIZE;
lowspeed = false;
break;
case LSHOST:
if ((usb_task_state & USB_STATE_MASK) == USB_STATE_DETACHED) {
lowspeed = true;
}
case FSHOST: //attached
if ((usb_task_state & USB_STATE_MASK) == USB_STATE_DETACHED) {
delay = millis() + USB_SETTLE_DELAY;
usb_task_state = USB_ATTACHED_SUBSTATE_SETTLE;
}
break;
}// switch( tmpdata
for (uint8_t i = 0; i < USB_NUMDEVICES; i++)
if (devConfig[i])
rcode = devConfig[i]->Poll();
switch (usb_task_state) {
case USB_DETACHED_SUBSTATE_INITIALIZE:
init();
for (uint8_t i = 0; i < USB_NUMDEVICES; i++)
if (devConfig[i])
rcode = devConfig[i]->Release();
usb_task_state = USB_DETACHED_SUBSTATE_WAIT_FOR_DEVICE;
break;
case USB_DETACHED_SUBSTATE_WAIT_FOR_DEVICE: //just sit here
break;
case USB_DETACHED_SUBSTATE_ILLEGAL: //just sit here
break;
case USB_ATTACHED_SUBSTATE_SETTLE: //settle time for just attached device
if (delay < millis())
usb_task_state = USB_ATTACHED_SUBSTATE_RESET_DEVICE;
break;
case USB_ATTACHED_SUBSTATE_RESET_DEVICE:
regWr(rHCTL, bmBUSRST); //issue bus reset
usb_task_state = USB_ATTACHED_SUBSTATE_WAIT_RESET_COMPLETE;
break;
case USB_ATTACHED_SUBSTATE_WAIT_RESET_COMPLETE:
if ((regRd(rHCTL) & bmBUSRST) == 0) {
tmpdata = regRd(rMODE) | bmSOFKAENAB; //start SOF generation
regWr(rMODE, tmpdata);
usb_task_state = USB_ATTACHED_SUBSTATE_WAIT_SOF;
//delay = millis() + 20; //20ms wait after reset per USB spec
}
break;
case USB_ATTACHED_SUBSTATE_WAIT_SOF: //todo: change check order
if (regRd(rHIRQ) & bmFRAMEIRQ) {
//when first SOF received _and_ 20ms has passed we can continue
/*
if (delay < millis()) //20ms passed
usb_task_state = USB_STATE_CONFIGURING;
*/
usb_task_state = USB_ATTACHED_SUBSTATE_WAIT_RESET;
delay = millis() + 20;
}
break;
case USB_ATTACHED_SUBSTATE_WAIT_RESET:
if (delay < millis()) usb_task_state = USB_STATE_CONFIGURING;
break;
case USB_STATE_CONFIGURING:
rcode = Configuring(0, 0, lowspeed);
if (rcode) {
if (rcode != USB_DEV_CONFIG_ERROR_DEVICE_INIT_INCOMPLETE) {
usb_error = rcode;
usb_task_state = USB_STATE_ERROR;
}
} else
usb_task_state = USB_STATE_RUNNING;
break;
case USB_STATE_RUNNING:
break;
case USB_STATE_ERROR:
//MAX3421E::Init();
break;
} // switch( usb_task_state )
}
uint8_t USB::DefaultAddressing(uint8_t parent, uint8_t port, bool lowspeed) {
//uint8_t buf[12];
uint8_t rcode;
UsbDevice *p0 = NULL, *p = NULL;
// Get pointer to pseudo device with address 0 assigned
p0 = addrPool.GetUsbDevicePtr(0);
if (!p0)
return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL;
if (!p0->epinfo)
return USB_ERROR_EPINFO_IS_NULL;
p0->lowspeed = (lowspeed) ? true : false;
// Allocate new address according to device class
uint8_t bAddress = addrPool.AllocAddress(parent, false, port);
if (!bAddress)
return USB_ERROR_OUT_OF_ADDRESS_SPACE_IN_POOL;
p = addrPool.GetUsbDevicePtr(bAddress);
if (!p)
return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL;
p->lowspeed = lowspeed;
// Assign new address to the device
rcode = setAddr(0, 0, bAddress);
if (rcode) {
addrPool.FreeAddress(bAddress);
bAddress = 0;
return rcode;
}
return 0;
};
/*
* This is broken. We need to enumerate differently.
* It causes major problems with several devices if detected in an unexpected order.
*
*
* Oleg - I wouldn't do anything before the newly connected device is considered sane.
* i.e.(delays are not indicated for brevity):
* 1. reset
* 2. GetDevDescr();
* 3a. If ACK, continue with allocating address, addressing, etc.
* 3b. Else reset again, count resets, stop at some number (5?).
* 4. When max.number of resets is reached, toggle power/fail
* If desired, this could be modified by performing two resets with GetDevDescr() in the middle - however, from my experience, if a device answers to GDD()
* it doesn't need to be reset again
* New steps proposal:
* 1: get address pool instance. exit on fail
* 2: pUsb->getDevDescr(0, 0, constBufSize, (uint8_t*)buf). exit on fail.
* 3: bus reset, 100ms delay
* 4: set address
* 5: pUsb->setEpInfoEntry(bAddress, 1, epInfo), exit on fail
* 6: while (configurations) {
* for(each configuration) {
* for (each driver) {
* 6a: Ask device if it likes configuration. Returns 0 on OK.
* If successful, the driver configured device.
* The driver now owns the endpoints, and takes over managing them.
* The following will need codes:
* Everything went well, instance consumed, exit with success.
* Instance already in use, ignore it, try next driver.
* Not a supported device, ignore it, try next driver.
* Not a supported configuration for this device, ignore it, try next driver.
* Could not configure device, fatal, exit with fail.
* }
* }
* }
* 7: for(each driver) {
* 7a: Ask device if it knows this VID/PID. Acts exactly like 6a, but using VID/PID
* 8: if we get here, no driver likes the device plugged in, so exit failure.
*
*/
uint8_t USB::Configuring(uint8_t parent, uint8_t port, bool lowspeed) {
uint8_t rcode = 0;
for (; devConfigIndex < USB_NUMDEVICES; devConfigIndex++) {
if (!devConfig[devConfigIndex])
continue;
rcode = devConfig[devConfigIndex]->ConfigureDevice(parent, port, lowspeed);
if (rcode == USB_ERROR_CONFIG_REQUIRES_ADDITIONAL_RESET) {
if (parent == 0) {
// Send a bus reset on the root interface.
regWr(rHCTL, bmBUSRST); //issue bus reset
delay(102); // delay 102ms, compensate for clock inaccuracy.
} else {
// reset parent port
devConfig[parent]->ResetHubPort(port);
}
}
rcode = devConfig[devConfigIndex]->Init(parent, port, lowspeed);
if (!rcode) {
devConfigIndex = 0;
return 0;
}
//printf("ERROR ENUMERATING %2.2x\r\n", rcode);
if (!(rcode == USB_DEV_CONFIG_ERROR_DEVICE_NOT_SUPPORTED || rcode == USB_ERROR_CLASS_INSTANCE_ALREADY_IN_USE)) {
// in case of an error dev_index should be reset to 0
// in order to start from the very beginning the
// next time the program gets here
if (rcode != USB_DEV_CONFIG_ERROR_DEVICE_INIT_INCOMPLETE)
devConfigIndex = 0;
return rcode;
}
}
// if we get here that means that the device class is not supported by any of registered classes
devConfigIndex = 0;
rcode = DefaultAddressing(parent, port, lowspeed);
return rcode;
}
uint8_t USB::ReleaseDevice(uint8_t addr) {
if (!addr)
return 0;
for (uint8_t i = 0; i < USB_NUMDEVICES; i++)
if (devConfig[i]->GetAddress() == addr)
return devConfig[i]->Release();
return 0;
}
#if 1 //!defined(USB_METHODS_INLINE)
//get device descriptor
uint8_t USB::getDevDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* dataptr) {
return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, 0x00, USB_DESCRIPTOR_DEVICE, 0x0000, nbytes, nbytes, dataptr, NULL));
}
//get configuration descriptor
uint8_t USB::getConfDescr(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t conf, uint8_t* dataptr) {
return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, conf, USB_DESCRIPTOR_CONFIGURATION, 0x0000, nbytes, nbytes, dataptr, NULL));
}
uint8_t USB::getConfDescr(uint8_t addr, uint8_t ep, uint8_t conf, USBReadParser *p) {
const uint8_t bufSize = 64;
uint8_t buf[bufSize];
uint8_t ret = getConfDescr(addr, ep, 8, conf, buf);
if (ret)
return ret;
uint16_t total = ((USB_CONFIGURATION_DESCRIPTOR*)buf)->wTotalLength;
//USBTRACE2("\r\ntotal conf.size:", total);
return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, conf, USB_DESCRIPTOR_CONFIGURATION, 0x0000, total, bufSize, buf, p));
}
//get string descriptor
uint8_t USB::getStrDescr(uint8_t addr, uint8_t ep, uint16_t ns, uint8_t index, uint16_t langid, uint8_t* dataptr) {
return ( ctrlReq(addr, ep, bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, index, USB_DESCRIPTOR_STRING, langid, ns, ns, dataptr, NULL));
}
//set address
uint8_t USB::setAddr(uint8_t oldaddr, uint8_t ep, uint8_t newaddr) {
return ( ctrlReq(oldaddr, ep, bmREQ_SET, USB_REQUEST_SET_ADDRESS, newaddr, 0x00, 0x0000, 0x0000, 0x0000, NULL, NULL));
}
//set configuration
uint8_t USB::setConf(uint8_t addr, uint8_t ep, uint8_t conf_value) {
return ( ctrlReq(addr, ep, bmREQ_SET, USB_REQUEST_SET_CONFIGURATION, conf_value, 0x00, 0x0000, 0x0000, 0x0000, NULL, NULL));
}
#endif // defined(USB_METHODS_INLINE)
Reference in a new issue View git blame Copy permalink