specchioriflesso/USB_Host_Shield_2.0
1
Fork 0
mirror of https://github.com/felis/USB_Host_Shield_2.0.git synced 2024-03-22 11:31:26 +01:00
Code Issues Projects Releases Packages Wiki Activity

Merge

Browse source
This commit is contained in:
Andrew J. Kroll 2013-12-04 18:51:06 -05:00
commit 95d133b919
40 changed files with 1214 additions and 945 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

45
BTD.cpp
View file

@ -16,7 +16,7 @@
*/
#include "BTD.h"
// To enable serial debugging uncomment "#define DEBUG_USB_HOST" in message.h
// To enable serial debugging see "settings.h"
//#define EXTRADEBUG // Uncomment to get even more debugging data
const uint8_t BTD::BTD_CONTROL_PIPE = 0;
@ -403,14 +403,10 @@ void BTD::HCI_event_task() {
break;
case EV_COMMAND_STATUS:
if (hcibuf[2]) { // show status on serial if not OK
if (hcibuf[2]) { // Show status on serial if not OK
#ifdef DEBUG_USB_HOST
Notify(PSTR("\r\nHCI Command Failed: "), 0x80);
D_PrintHex<uint8_t > (hcibuf[2], 0x80);
Notify(PSTR(" "), 0x80);
D_PrintHex<uint8_t > (hcibuf[4], 0x80);
Notify(PSTR(" "), 0x80);
D_PrintHex<uint8_t > (hcibuf[5], 0x80);
#endif
}
break;
@ -466,15 +462,18 @@ void BTD::HCI_event_task() {
case EV_CONNECT_COMPLETE:
hci_event_flag |= HCI_FLAG_CONNECT_EVENT;
if (!hcibuf[2]) { // check if connected OK
#ifdef EXTRADEBUG
Notify(PSTR("\r\nConnection established"), 0x80);
#endif
hci_handle = hcibuf[3] | ((hcibuf[4] & 0x0F) << 8); // store the handle for the ACL connection
hci_event_flag |= HCI_FLAG_CONN_COMPLETE; // set connection complete flag
}
#ifdef DEBUG_USB_HOST
else {
Notify(PSTR("\r\nConnection Failed"), 0x80);
} else {
hci_state = HCI_CHECK_WII_SERVICE;
}
#ifdef DEBUG_USB_HOST
Notify(PSTR("\r\nConnection Failed: "), 0x80);
D_PrintHex<uint8_t > (hcibuf[2], 0x80);
#endif
}
break;
case EV_DISCONNECT_COMPLETE:
@ -971,16 +970,20 @@ void BTD::hci_inquiry_cancel() {
}
void BTD::hci_connect() {
hci_connect(disc_bdaddr); // Use last discovered device
}
void BTD::hci_connect(uint8_t *bdaddr) {
hci_event_flag &= ~(HCI_FLAG_CONN_COMPLETE | HCI_FLAG_CONNECT_EVENT);
hcibuf[0] = 0x05;
hcibuf[1] = 0x01 << 2; // HCI OGF = 1
hcibuf[2] = 0x0D; // parameter Total Length = 13
hcibuf[3] = disc_bdaddr[0]; // 6 octet bdaddr
hcibuf[4] = disc_bdaddr[1];
hcibuf[5] = disc_bdaddr[2];
hcibuf[6] = disc_bdaddr[3];
hcibuf[7] = disc_bdaddr[4];
hcibuf[8] = disc_bdaddr[5];
hcibuf[3] = bdaddr[0]; // 6 octet bdaddr (LSB)
hcibuf[4] = bdaddr[1];
hcibuf[5] = bdaddr[2];
hcibuf[6] = bdaddr[3];
hcibuf[7] = bdaddr[4];
hcibuf[8] = bdaddr[5];
hcibuf[9] = 0x18; // DM1 or DH1 may be used
hcibuf[10] = 0xCC; // DM3, DH3, DM5, DH5 may be used
hcibuf[11] = 0x01; // Page repetition mode R1
@ -1079,7 +1082,7 @@ void BTD::hci_disconnect(uint16_t handle) { // This is called by the different s
}
void BTD::hci_write_class_of_device() { // See http://bluetooth-pentest.narod.ru/software/bluetooth_class_of_device-service_generator.html
hcibuf[0] = 0x24; // HCI OCF = 3
hcibuf[0] = 0x24; // HCI OCF = 24
hcibuf[1] = 0x03 << 2; // HCI OGF = 3
hcibuf[2] = 0x03; // parameter length = 3
hcibuf[3] = 0x04; // Robot
@ -1259,9 +1262,9 @@ void BTD::setBdaddr(uint8_t* bdaddr) {
buf[1] = 0x00;
for (uint8_t i = 0; i < 6; i++)
buf[i + 2] = bdaddr[5 - i]; // Copy into buffer, has to be written reversed
buf[i + 2] = bdaddr[5 - i]; // Copy into buffer, has to be written reversed, so it is MSB first
// bmRequest = Host to device (0x00) | Class (0x20) | Interface (0x01) = 0x21, bRequest = Set Report (0x09), Report ID (0xF5), Report Type (Feature 0x03), interface (0x00), datalength, datalength, data)
// bmRequest = Host to device (0x00) | Class (0x20) | Interface (0x01) = 0x21, bRequest = Set Report (0x09), Report ID (0xF5), Report Type (Feature 0x03), interface (0x00), datalength, datalength, data
pUsb->ctrlReq(bAddress, epInfo[BTD_CONTROL_PIPE].epAddr, bmREQ_HID_OUT, HID_REQUEST_SET_REPORT, 0xF5, 0x03, 0x00, 8, 8, buf, NULL);
}
@ -1277,6 +1280,6 @@ void BTD::setMoveBdaddr(uint8_t* bdaddr) {
for (uint8_t i = 0; i < 6; i++)
buf[i + 1] = bdaddr[i];
// bmRequest = Host to device (0x00) | Class (0x20) | Interface (0x01) = 0x21, bRequest = Set Report (0x09), Report ID (0x05), Report Type (Feature 0x03), interface (0x00), datalength, datalength, data)
// bmRequest = Host to device (0x00) | Class (0x20) | Interface (0x01) = 0x21, bRequest = Set Report (0x09), Report ID (0x05), Report Type (Feature 0x03), interface (0x00), datalength, datalength, data
pUsb->ctrlReq(bAddress, epInfo[BTD_CONTROL_PIPE].epAddr, bmREQ_HID_OUT, HID_REQUEST_SET_REPORT, 0x05, 0x03, 0x00, 11, 11, buf, NULL);
}

15
BTD.h
View file

@ -219,7 +219,13 @@ public:
* @return Returns true if the device's VID and PID matches this driver.
*/
virtual boolean VIDPIDOK(uint16_t vid, uint16_t pid) {
return ((vid == PS3_VID || vid == IOGEAR_GBU521_VID) && (pid == PS3_PID || pid == PS3NAVIGATION_PID || pid == PS3MOVE_PID || pid == IOGEAR_GBU521_PID));
if (vid == IOGEAR_GBU521_VID && pid == IOGEAR_GBU521_PID)
return true;
if (my_bdaddr[0] != 0x00 || my_bdaddr[1] != 0x00 || my_bdaddr[2] != 0x00 || my_bdaddr[3] != 0x00 || my_bdaddr[4] != 0x00 || my_bdaddr[5] != 0x00) { // Check if Bluetooth address is set
if (vid == PS3_VID && (pid == PS3_PID || pid == PS3NAVIGATION_PID || pid == PS3MOVE_PID))
return true;
}
return false;
};
/**@}*/
@ -307,8 +313,13 @@ public:
void hci_inquiry();
/** Cancel a HCI inquiry. */
void hci_inquiry_cancel();
/** Connect to a device. */
/** Connect to last device communicated with. */
void hci_connect();
/**
* Connect to device.
* @param bdaddr Bluetooth address of the device.
*/
void hci_connect(uint8_t *bdaddr);
/** Used to a set the class of the device. */
void hci_write_class_of_device();
/**@}*/

81
PS3BT.cpp
View file

@ -16,7 +16,7 @@
*/
#include "PS3BT.h"
// To enable serial debugging uncomment "#define DEBUG_USB_HOST" in message.h
// To enable serial debugging see "settings.h"
//#define EXTRADEBUG // Uncomment to get even more debugging data
//#define PRINTREPORT // Uncomment to print the report send by the PS3 Controllers
@ -36,14 +36,14 @@ pBtd(p) // pointer to USB class instance - mandatory
HIDBuffer[0] = 0x52; // HID BT Set_report (0x50) | Report Type (Output 0x02)
HIDBuffer[1] = 0x01; // Report ID
//Needed for PS3 Move Controller commands to work via bluetooth
// Needed for PS3 Move Controller commands to work via bluetooth
HIDMoveBuffer[0] = 0xA2; // HID BT DATA_request (0xA0) | Report Type (Output 0x02)
HIDMoveBuffer[1] = 0x02; // Report ID
/* Set device cid for the control and intterrupt channelse - LSB */
control_dcid[0] = 0x40; //0x0040
control_dcid[0] = 0x40; // 0x0040
control_dcid[1] = 0x00;
interrupt_dcid[0] = 0x41; //0x0041
interrupt_dcid[0] = 0x41; // 0x0041
interrupt_dcid[1] = 0x00;
Reset();
@ -56,25 +56,19 @@ bool PS3BT::getButtonPress(Button b) {
bool PS3BT::getButtonClick(Button b) {
uint32_t button = pgm_read_dword(&BUTTONS[(uint8_t)b]);
bool click = (ButtonClickState & button);
ButtonClickState &= ~button; // clear "click" event
ButtonClickState &= ~button; // Clear "click" event
return click;
}
uint8_t PS3BT::getAnalogButton(Button a) {
if (l2capinbuf == NULL)
return 0;
return (uint8_t)(l2capinbuf[pgm_read_byte(&ANALOGBUTTONS[(uint8_t)a])]);
}
uint8_t PS3BT::getAnalogHat(AnalogHat a) {
if (l2capinbuf == NULL)
return 0;
return (uint8_t)(l2capinbuf[(uint8_t)a + 15]);
}
int16_t PS3BT::getSensor(Sensor a) {
if (l2capinbuf == NULL)
return 0;
if (PS3Connected) {
if (a == aX || a == aY || a == aZ || a == gZ)
return ((l2capinbuf[(uint16_t)a] << 8) | l2capinbuf[(uint16_t)a + 1]);
@ -92,13 +86,11 @@ int16_t PS3BT::getSensor(Sensor a) {
}
double PS3BT::getAngle(Angle a) {
double accXval;
double accYval;
double accZval;
double accXval, accYval, accZval;
if (PS3Connected) {
// Data for the Kionix KXPC4 used in the DualShock 3
const double zeroG = 511.5; // 1.65/3.3*1023 (1,65V)
const double zeroG = 511.5; // 1.65/3.3*1023 (1.65V)
accXval = -((double)getSensor(aX) - zeroG);
accYval = -((double)getSensor(aY) - zeroG);
accZval = -((double)getSensor(aZ) - zeroG);
@ -114,13 +106,10 @@ double PS3BT::getAngle(Angle a) {
// Convert to 360 degrees resolution
// atan2 outputs the value of -π to π (radians)
// We are then converting it to 0 to 2π and then to degrees
if (a == Pitch) {
double angle = (atan2(accYval, accZval) + PI) * RAD_TO_DEG;
return angle;
} else {
double angle = (atan2(accXval, accZval) + PI) * RAD_TO_DEG;
return angle;
}
if (a == Pitch)
return (atan2(accYval, accZval) + PI) * RAD_TO_DEG;
else
return (atan2(accXval, accZval) + PI) * RAD_TO_DEG;
}
double PS3BT::get9DOFValues(Sensor a) { // Thanks to Manfred Piendl
@ -168,11 +157,7 @@ String PS3BT::getTemperature() {
}
bool PS3BT::getStatus(Status c) {
if (l2capinbuf == NULL)
return false;
if (l2capinbuf[(uint16_t)c >> 8] == ((uint8_t)c & 0xff))
return true;
return false;
return (l2capinbuf[(uint16_t)c >> 8] == ((uint8_t)c & 0xff));
}
String PS3BT::getStatusString() {
@ -266,8 +251,7 @@ void PS3BT::ACLData(uint8_t* ACLData) {
}
}
if (((ACLData[0] | (ACLData[1] << 8)) == (hci_handle | 0x2000))) { //acl_handle_ok
for (uint8_t i = 0; i < BULK_MAXPKTSIZE; i++)
l2capinbuf[i] = ACLData[i];
memcpy(l2capinbuf, ACLData, BULK_MAXPKTSIZE);
if ((l2capinbuf[6] | (l2capinbuf[7] << 8)) == 0x0001) { //l2cap_control - Channel ID for ACL-U
if (l2capinbuf[8] == L2CAP_CMD_COMMAND_REJECT) {
#ifdef DEBUG_USB_HOST
@ -457,8 +441,7 @@ void PS3BT::L2CAP_task() {
Notify(PSTR("\r\nHID Interrupt Successfully Configured"), 0x80);
#endif
if (remote_name[0] == 'M') { // First letter in Motion Controller ('M')
for (uint8_t i = 0; i < BULK_MAXPKTSIZE; i++) // Reset l2cap in buffer as it sometimes read it as a button has been pressed
l2capinbuf[i] = 0;
memset(l2capinbuf, 0, BULK_MAXPKTSIZE); // Reset l2cap in buffer as it sometimes read it as a button has been pressed
l2cap_state = L2CAP_HID_PS3_LED;
} else
l2cap_state = L2CAP_HID_ENABLE_SIXAXIS;
@ -497,8 +480,7 @@ void PS3BT::Run() {
switch (l2cap_state) {
case L2CAP_HID_ENABLE_SIXAXIS:
if (millis() - timer > 1000) { // loop 1 second before sending the command
for (uint8_t i = 0; i < BULK_MAXPKTSIZE; i++) // Reset l2cap in buffer as it sometimes read it as a button has been pressed
l2capinbuf[i] = 0;
memset(l2capinbuf, 0, BULK_MAXPKTSIZE); // Reset l2cap in buffer as it sometimes read it as a button has been pressed
for (uint8_t i = 15; i < 19; i++)
l2capinbuf[i] = 0x7F; // Set the analog joystick values to center position
enable_sixaxis();
@ -536,9 +518,9 @@ void PS3BT::Run() {
break;
case L2CAP_DONE:
if (PS3MoveConnected) { //The Bulb and rumble values, has to be send at aproximatly every 5th second for it to stay on
if (millis() - timerBulbRumble > 4000) { //Send at least every 4th second
HIDMove_Command(HIDMoveBuffer, HID_BUFFERSIZE); //The Bulb and rumble values, has to be written again and again, for it to stay turned on
if (PS3MoveConnected) { // The Bulb and rumble values, has to be send at aproximatly every 5th second for it to stay on
if (millis() - timerBulbRumble > 4000) { // Send at least every 4th second
HIDMove_Command(HIDMoveBuffer, HID_BUFFERSIZE); // The Bulb and rumble values, has to be written again and again, for it to stay turned on
timerBulbRumble = millis();
}
}
@ -550,18 +532,22 @@ void PS3BT::Run() {
/* HID Commands */
/************************************************************/
//Playstation Sixaxis Dualshock and Navigation Controller commands
// Playstation Sixaxis Dualshock and Navigation Controller commands
void PS3BT::HID_Command(uint8_t* data, uint8_t nbytes) {
if (millis() - timerHID <= 250)// Check if is has been more than 250ms since last command
delay((uint32_t)(250 - (millis() - timerHID))); //There have to be a delay between commands
if (millis() - timerHID <= 150) // Check if is has been more than 150ms since last command
delay((uint32_t)(150 - (millis() - timerHID))); // There have to be a delay between commands
pBtd->L2CAP_Command(hci_handle, data, nbytes, control_scid[0], control_scid[1]); // Both the Navigation and Dualshock controller sends data via the control channel
timerHID = millis();
}
void PS3BT::setAllOff() {
for (uint8_t i = 0; i < PS3_REPORT_BUFFER_SIZE; i++)
HIDBuffer[i + 2] = pgm_read_byte(&PS3_REPORT_BUFFER[i]); // First two bytes reserved for report type and ID
HIDBuffer[3] = 0x00; // Rumble bytes
HIDBuffer[4] = 0x00;
HIDBuffer[5] = 0x00;
HIDBuffer[6] = 0x00;
HIDBuffer[11] = 0x00; // LED byte
HID_Command(HIDBuffer, HID_BUFFERSIZE);
}
@ -596,6 +582,7 @@ void PS3BT::setLedRaw(uint8_t value) {
HIDBuffer[11] = value << 1;
HID_Command(HIDBuffer, HID_BUFFERSIZE);
}
void PS3BT::setLedOff(LED a) {
HIDBuffer[11] &= ~((uint8_t)((pgm_read_byte(&LEDS[(uint8_t)a]) & 0x0f) << 1));
HID_Command(HIDBuffer, HID_BUFFERSIZE);
@ -611,7 +598,7 @@ void PS3BT::setLedToggle(LED a) {
HID_Command(HIDBuffer, HID_BUFFERSIZE);
}
void PS3BT::enable_sixaxis() { //Command used to enable the Dualshock 3 and Navigation controller to send data via USB
void PS3BT::enable_sixaxis() { // Command used to enable the Dualshock 3 and Navigation controller to send data via Bluetooth
uint8_t cmd_buf[6];
cmd_buf[0] = 0x53; // HID BT Set_report (0x50) | Report Type (Feature 0x03)
cmd_buf[1] = 0xF4; // Report ID
@ -623,17 +610,17 @@ void PS3BT::enable_sixaxis() { //Command used to enable the Dualshock 3 and Navi
HID_Command(cmd_buf, 6);
}
//Playstation Move Controller commands
// Playstation Move Controller commands
void PS3BT::HIDMove_Command(uint8_t* data, uint8_t nbytes) {
if (millis() - timerHID <= 250)// Check if is has been less than 200ms since last command
delay((uint32_t)(250 - (millis() - timerHID))); //There have to be a delay between commands
if (millis() - timerHID <= 150)// Check if is has been less than 150ms since last command
delay((uint32_t)(150 - (millis() - timerHID))); // There have to be a delay between commands
pBtd->L2CAP_Command(hci_handle, data, nbytes, interrupt_scid[0], interrupt_scid[1]); // The Move controller sends it's data via the intterrupt channel
timerHID = millis();
}
void PS3BT::moveSetBulb(uint8_t r, uint8_t g, uint8_t b) { //Use this to set the Color using RGB values
//set the Bulb's values into the write buffer
// Set the Bulb's values into the write buffer
HIDMoveBuffer[3] = r;
HIDMoveBuffer[4] = g;
HIDMoveBuffer[5] = b;
@ -650,7 +637,7 @@ void PS3BT::moveSetRumble(uint8_t rumble) {
if (rumble < 64 && rumble != 0) // The rumble value has to at least 64, or approximately 25% (64/255*100)
Notify(PSTR("\r\nThe rumble value has to at least 64, or approximately 25%"), 0x80);
#endif
//set the rumble value into the write buffer
// Set the rumble value into the write buffer
HIDMoveBuffer[7] = rumble;
HIDMove_Command(HIDMoveBuffer, HID_BUFFERSIZE);

4
PS3BT.h
View file

@ -176,6 +176,10 @@ public:
* @param value See: ::LED enum.
*/
void setLedRaw(uint8_t value);
/** Turn all LEDs off. */
void setLedOff() {
setLedRaw(0);
}
/**
* Turn the specific ::LED off.
* @param a The ::LED to turn off.

111
PS3USB.cpp
View file

@ -16,7 +16,7 @@
*/
#include "PS3USB.h"
// To enable serial debugging uncomment "#define DEBUG_USB_HOST" in message.h
// To enable serial debugging see "settings.h"
//#define EXTRADEBUG // Uncomment to get even more debugging data
//#define PRINTREPORT // Uncomment to print the report send by the PS3 Controllers
@ -281,8 +281,7 @@ uint8_t PS3USB::Poll() {
#endif
}
} else if (PS3MoveConnected) { // One can only set the color of the bulb, set the rumble, set and get the bluetooth address and calibrate the magnetometer via USB
if (millis() - timer > 4000) // Send at least every 4th second
{
if (millis() - timer > 4000) { // Send at least every 4th second
Move_Command(writeBuf, MOVE_REPORT_BUFFER_SIZE); // The Bulb and rumble values, has to be written again and again, for it to stay turned on
timer = millis();
}
@ -291,9 +290,6 @@ uint8_t PS3USB::Poll() {
}
void PS3USB::readReport() {
if (readBuf == NULL)
return;
ButtonState = (uint32_t)(readBuf[2] | ((uint16_t)readBuf[3] << 8) | ((uint32_t)readBuf[4] << 16));
//Notify(PSTR("\r\nButtonState", 0x80);
@ -305,10 +301,8 @@ void PS3USB::readReport() {
}
}
void PS3USB::printReport() { //Uncomment "#define PRINTREPORT" to print the report send by the PS3 Controllers
void PS3USB::printReport() { // Uncomment "#define PRINTREPORT" to print the report send by the PS3 Controllers
#ifdef PRINTREPORT
if (readBuf == NULL)
return;
for (uint8_t i = 0; i < PS3_REPORT_BUFFER_SIZE; i++) {
D_PrintHex<uint8_t > (readBuf[i], 0x80);
Notify(PSTR(" "), 0x80);
@ -324,25 +318,19 @@ bool PS3USB::getButtonPress(Button b) {
bool PS3USB::getButtonClick(Button b) {
uint32_t button = pgm_read_dword(&BUTTONS[(uint8_t)b]);
bool click = (ButtonClickState & button);
ButtonClickState &= ~button; // clear "click" event
ButtonClickState &= ~button; // Clear "click" event
return click;
}
uint8_t PS3USB::getAnalogButton(Button a) {
if (readBuf == NULL)
return 0;
return (uint8_t)(readBuf[(pgm_read_byte(&ANALOGBUTTONS[(uint8_t)a])) - 9]);
}
uint8_t PS3USB::getAnalogHat(AnalogHat a) {
if (readBuf == NULL)
return 0;
return (uint8_t)(readBuf[((uint8_t)a + 6)]);
}
uint16_t PS3USB::getSensor(Sensor a) {
if (readBuf == NULL)
return 0;
return ((readBuf[((uint16_t)a) - 9] << 8) | readBuf[((uint16_t)a + 1) - 9]);
}
@ -361,23 +349,16 @@ double PS3USB::getAngle(Angle a) {
// Convert to 360 degrees resolution
// atan2 outputs the value of -π to π (radians)
// We are then converting it to 0 to 2π and then to degrees
if (a == Pitch) {
double angle = (atan2(accYval, accZval) + PI) * RAD_TO_DEG;
return angle;
} else {
double angle = (atan2(accXval, accZval) + PI) * RAD_TO_DEG;
return angle;
}
if (a == Pitch)
return (atan2(accYval, accZval) + PI) * RAD_TO_DEG;
else
return (atan2(accXval, accZval) + PI) * RAD_TO_DEG;
} else
return 0;
}
bool PS3USB::getStatus(Status c) {
if (readBuf == NULL)
return false;
if (readBuf[((uint16_t)c >> 8) - 9] == ((uint8_t)c & 0xff))
return true;
return false;
return (readBuf[((uint16_t)c >> 8) - 9] == ((uint8_t)c & 0xff));
}
String PS3USB::getStatusString() {
@ -416,8 +397,8 @@ String PS3USB::getStatusString() {
}
/* Playstation Sixaxis Dualshock and Navigation Controller commands */
void PS3USB::PS3_Command(uint8_t* data, uint16_t nbytes) {
//bmRequest = Host to device (0x00) | Class (0x20) | Interface (0x01) = 0x21, bRequest = Set Report (0x09), Report ID (0x01), Report Type (Output 0x02), interface (0x00), datalength, datalength, data)
void PS3USB::PS3_Command(uint8_t *data, uint16_t nbytes) {
// bmRequest = Host to device (0x00) | Class (0x20) | Interface (0x01) = 0x21, bRequest = Set Report (0x09), Report ID (0x01), Report Type (Output 0x02), interface (0x00), datalength, datalength, data)
pUsb->ctrlReq(bAddress, epInfo[PS3_CONTROL_PIPE].epAddr, bmREQ_HID_OUT, HID_REQUEST_SET_REPORT, 0x01, 0x02, 0x00, nbytes, nbytes, data, NULL);
}
@ -430,9 +411,9 @@ void PS3USB::setAllOff() {
void PS3USB::setRumbleOff() {
writeBuf[1] = 0x00;
writeBuf[2] = 0x00; //low mode off
writeBuf[2] = 0x00; // Low mode off
writeBuf[3] = 0x00;
writeBuf[4] = 0x00; //high mode off
writeBuf[4] = 0x00; // High mode off
PS3_Command(writeBuf, PS3_REPORT_BUFFER_SIZE);
}
@ -476,36 +457,47 @@ void PS3USB::setLedToggle(LED a) {
PS3_Command(writeBuf, PS3_REPORT_BUFFER_SIZE);
}
void PS3USB::setBdaddr(uint8_t* BDADDR) {
/* Set the internal bluetooth address */
void PS3USB::setBdaddr(uint8_t *bdaddr) {
/* Set the internal Bluetooth address */
uint8_t buf[8];
buf[0] = 0x01;
buf[1] = 0x00;
for (uint8_t i = 0; i < 6; i++)
buf[i + 2] = BDADDR[5 - i]; //Copy into buffer, has to be written reversed
//bmRequest = Host to device (0x00) | Class (0x20) | Interface (0x01) = 0x21, bRequest = Set Report (0x09), Report ID (0xF5), Report Type (Feature 0x03), interface (0x00), datalength, datalength, data)
for (uint8_t i = 0; i < 6; i++)
buf[i + 2] = bdaddr[5 - i]; // Copy into buffer, has to be written reversed, so it is MSB first
// bmRequest = Host to device (0x00) | Class (0x20) | Interface (0x01) = 0x21, bRequest = Set Report (0x09), Report ID (0xF5), Report Type (Feature 0x03), interface (0x00), datalength, datalength, data
pUsb->ctrlReq(bAddress, epInfo[PS3_CONTROL_PIPE].epAddr, bmREQ_HID_OUT, HID_REQUEST_SET_REPORT, 0xF5, 0x03, 0x00, 8, 8, buf, NULL);
}
void PS3USB::enable_sixaxis() { //Command used to enable the Dualshock 3 and Navigation controller to send data via USB
void PS3USB::getBdaddr(uint8_t *bdaddr) {
uint8_t buf[8];
// bmRequest = Device to host (0x80) | Class (0x20) | Interface (0x01) = 0xA1, bRequest = Get Report (0x01), Report ID (0xF5), Report Type (Feature 0x03), interface (0x00), datalength, datalength, data
pUsb->ctrlReq(bAddress, epInfo[PS3_CONTROL_PIPE].epAddr, bmREQ_HID_IN, HID_REQUEST_GET_REPORT, 0xF5, 0x03, 0x00, 8, 8, buf, NULL);
for (uint8_t i = 0; i < 6; i++)
bdaddr[5 - i] = buf[i + 2]; // Copy into buffer reversed, so it is LSB first
}
void PS3USB::enable_sixaxis() { // Command used to enable the Dualshock 3 and Navigation controller to send data via USB
uint8_t cmd_buf[4];
cmd_buf[0] = 0x42; // Special PS3 Controller enable commands
cmd_buf[1] = 0x0c;
cmd_buf[2] = 0x00;
cmd_buf[3] = 0x00;
//bmRequest = Host to device (0x00) | Class (0x20) | Interface (0x01) = 0x21, bRequest = Set Report (0x09), Report ID (0xF4), Report Type (Feature 0x03), interface (0x00), datalength, datalength, data)
// bmRequest = Host to device (0x00) | Class (0x20) | Interface (0x01) = 0x21, bRequest = Set Report (0x09), Report ID (0xF4), Report Type (Feature 0x03), interface (0x00), datalength, datalength, data)
pUsb->ctrlReq(bAddress, epInfo[PS3_CONTROL_PIPE].epAddr, bmREQ_HID_OUT, HID_REQUEST_SET_REPORT, 0xF4, 0x03, 0x00, 4, 4, cmd_buf, NULL);
}
/* Playstation Move Controller commands */
void PS3USB::Move_Command(uint8_t* data, uint16_t nbytes) {
void PS3USB::Move_Command(uint8_t *data, uint16_t nbytes) {
pUsb->outTransfer(bAddress, epInfo[ PS3_OUTPUT_PIPE ].epAddr, nbytes, data);
}
void PS3USB::moveSetBulb(uint8_t r, uint8_t g, uint8_t b) { //Use this to set the Color using RGB values
// set the Bulb's values into the write buffer
void PS3USB::moveSetBulb(uint8_t r, uint8_t g, uint8_t b) { // Use this to set the Color using RGB values
// Set the Bulb's values into the write buffer
writeBuf[2] = r;
writeBuf[3] = g;
writeBuf[4] = b;
@ -513,7 +505,7 @@ void PS3USB::moveSetBulb(uint8_t r, uint8_t g, uint8_t b) { //Use this to set th
Move_Command(writeBuf, MOVE_REPORT_BUFFER_SIZE);
}
void PS3USB::moveSetBulb(Colors color) { //Use this to set the Color using the predefined colors in "enums.h"
void PS3USB::moveSetBulb(Colors color) { // Use this to set the Color using the predefined colors in "enums.h"
moveSetBulb((uint8_t)(color >> 16), (uint8_t)(color >> 8), (uint8_t)(color));
}
@ -522,14 +514,13 @@ void PS3USB::moveSetRumble(uint8_t rumble) {
if (rumble < 64 && rumble != 0) // The rumble value has to at least 64, or approximately 25% (64/255*100)
Notify(PSTR("\r\nThe rumble value has to at least 64, or approximately 25%"), 0x80);
#endif
//set the rumble value into the write buffer
writeBuf[6] = rumble;
writeBuf[6] = rumble; // Set the rumble value into the write buffer
Move_Command(writeBuf, MOVE_REPORT_BUFFER_SIZE);
}
void PS3USB::setMoveBdaddr(uint8_t* BDADDR) {
/* Set the internal bluetooth address */
void PS3USB::setMoveBdaddr(uint8_t *bdaddr) {
/* Set the internal Bluetooth address */
uint8_t buf[11];
buf[0] = 0x05;
buf[7] = 0x10;
@ -538,12 +529,34 @@ void PS3USB::setMoveBdaddr(uint8_t* BDADDR) {
buf[10] = 0x12;
for (uint8_t i = 0; i < 6; i++)
buf[i + 1] = BDADDR[i];
buf[i + 1] = bdaddr[i];
//bmRequest = Host to device (0x00) | Class (0x20) | Interface (0x01) = 0x21, bRequest = Set Report (0x09), Report ID (0x05), Report Type (Feature 0x03), interface (0x00), datalength, datalength, data)
// bmRequest = Host to device (0x00) | Class (0x20) | Interface (0x01) = 0x21, bRequest = Set Report (0x09), Report ID (0x05), Report Type (Feature 0x03), interface (0x00), datalength, datalength, data
pUsb->ctrlReq(bAddress, epInfo[PS3_CONTROL_PIPE].epAddr, bmREQ_HID_OUT, HID_REQUEST_SET_REPORT, 0x05, 0x03, 0x00, 11, 11, buf, NULL);
}
void PS3USB::getMoveBdaddr(uint8_t *bdaddr) {
uint8_t buf[16];
// bmRequest = Device to host (0x80) | Class (0x20) | Interface (0x01) = 0xA1, bRequest = Get Report (0x01), Report ID (0x04), Report Type (Feature 0x03), interface (0x00), datalength, datalength, data
pUsb->ctrlReq(bAddress, epInfo[PS3_CONTROL_PIPE].epAddr, bmREQ_HID_IN, HID_REQUEST_GET_REPORT, 0x04, 0x03, 0x00, 16, 16, buf, NULL);
for (uint8_t i = 0; i < 6; i++)
bdaddr[i] = buf[10 + i];
}
void PS3USB::getMoveCalibration(uint8_t *data) {
uint8_t buf[49];
for (uint8_t i = 0; i < 3; i++) {
// bmRequest = Device to host (0x80) | Class (0x20) | Interface (0x01) = 0xA1, bRequest = Get Report (0x01), Report ID (0x10), Report Type (Feature 0x03), interface (0x00), datalength, datalength, data
pUsb->ctrlReq(bAddress, epInfo[PS3_CONTROL_PIPE].epAddr, bmREQ_HID_IN, HID_REQUEST_GET_REPORT, 0x10, 0x03, 0x00, 49, 49, buf, NULL);
for (byte j = 0; j < 49; j++)
data[49 * i + j] = buf[j];
}
}
void PS3USB::onInit() {
if (pFuncOnInit)
pFuncOnInit(); // Call the user function

65
PS3USB.h
View file

@ -22,27 +22,30 @@
#include "PS3Enums.h"
/* PS3 data taken from descriptors */
#define EP_MAXPKTSIZE 64 // max size for data via USB
#define EP_MAXPKTSIZE 64 // max size for data via USB
/* Endpoint types */
#define EP_INTERRUPT 0x03
#define EP_INTERRUPT 0x03
/* Names we give to the 3 ps3 pipes - this is only used for setting the bluetooth address into the ps3 controllers */
#define PS3_CONTROL_PIPE 0
#define PS3_OUTPUT_PIPE 1
#define PS3_INPUT_PIPE 2
#define PS3_CONTROL_PIPE 0
#define PS3_OUTPUT_PIPE 1
#define PS3_INPUT_PIPE 2
//PID and VID of the different devices
#define PS3_VID 0x054C // Sony Corporation
#define PS3_PID 0x0268 // PS3 Controller DualShock 3
#define PS3NAVIGATION_PID 0x042F // Navigation controller
#define PS3MOVE_PID 0x03D5 // Motion controller
#define PS3_VID 0x054C // Sony Corporation
#define PS3_PID 0x0268 // PS3 Controller DualShock 3
#define PS3NAVIGATION_PID 0x042F // Navigation controller
#define PS3MOVE_PID 0x03D5 // Motion controller
// used in control endpoint header for HID Commands
#define bmREQ_HID_OUT USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_INTERFACE
#define HID_REQUEST_SET_REPORT 0x09
// Used in control endpoint header for HID Commands
#define bmREQ_HID_OUT USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_INTERFACE
#define bmREQ_HID_IN USB_SETUP_DEVICE_TO_HOST|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_INTERFACE
#define PS3_MAX_ENDPOINTS 3
#define HID_REQUEST_GET_REPORT 0x01
#define HID_REQUEST_SET_REPORT 0x09
#define PS3_MAX_ENDPOINTS 3
/**
* This class implements support for all the official PS3 Controllers:
@ -112,14 +115,34 @@ public:
/**
* Used to set the Bluetooth address inside the Dualshock 3 and Navigation controller.
* @param BDADDR Your dongles Bluetooth address.
* Set using LSB first.
* @param bdaddr Your dongles Bluetooth address.
*/
void setBdaddr(uint8_t* BDADDR);
void setBdaddr(uint8_t *bdaddr);
/**
* Used to get the Bluetooth address inside the Dualshock 3 and Navigation controller.
* Will return LSB first.
* @param bdaddr Your dongles Bluetooth address.
*/
void getBdaddr(uint8_t *bdaddr);
/**
* Used to set the Bluetooth address inside the Move controller.
* @param BDADDR Your dongles Bluetooth address.
* Set using LSB first.
* @param bdaddr Your dongles Bluetooth address.
*/
void setMoveBdaddr(uint8_t* BDADDR);
void setMoveBdaddr(uint8_t *bdaddr);
/**
* Used to get the Bluetooth address inside the Move controller.
* Will return LSB first.
* @param bdaddr Your dongles Bluetooth address.
*/
void getMoveBdaddr(uint8_t *bdaddr);
/**
* Used to get the calibration data inside the Move controller.
* @param bdaddr Buffer to store data in. Must be at least 147 bytes
*/
void getMoveCalibration(uint8_t *data);
/** @name PS3 Controller functions */
/**
@ -197,6 +220,10 @@ public:
* @param value See: ::LED enum.
*/
void setLedRaw(uint8_t value);
/** Turn all LEDs off. */
void setLedOff() {
setLedRaw(0);
}
/**
* Turn the specific ::LED off.
* @param a The ::LED to turn off.
@ -278,8 +305,8 @@ private:
void printReport(); // print incoming date - Uncomment for debugging
/* Private commands */
void PS3_Command(uint8_t* data, uint16_t nbytes);
void PS3_Command(uint8_t *data, uint16_t nbytes);
void enable_sixaxis(); // Command used to enable the Dualshock 3 and Navigation controller to send data via USB
void Move_Command(uint8_t* data, uint16_t nbytes);
void Move_Command(uint8_t *data, uint16_t nbytes);
};
#endif

4
README.md
View file

@ -107,7 +107,7 @@ These libraries consist of the [PS3BT](PS3BT.cpp) and [PS3USB](PS3USB.cpp). Thes
In order to use your Playstation controller via Bluetooth you have to set the Bluetooth address of the dongle internally to your PS3 Controller. This can be achieved by plugging the controller in via USB and letting the library set it automatically.
__Note:__ To obtain the address you have to plug in the Bluetooth dongle before connecting the controller, or alternatively you could set it in code like so: <https://github.com/felis/USB_Host_Shield_2.0/blob/master/examples/Bluetooth/PS3BT/PS3BT.ino#L12>.
__Note:__ To obtain the address you have to plug in the Bluetooth dongle before connecting the controller, or alternatively you could set it in code like so: <https://github.com/felis/USB_Host_Shield_2.0/blob/master/examples/Bluetooth/PS3BT/PS3BT.ino#L15>.
For more information about the PS3 protocol see the official wiki: <https://github.com/felis/USB_Host_Shield_2.0/wiki/PS3-Information>.
@ -184,7 +184,7 @@ After that you can simply create the instance like so:
WII Wii(&Btd);
```
Then just press any button any button on the Wiimote and it will connect to the dongle.
Then just press any button on the Wiimote and it will then connect to the dongle.
Take a look at the example for more information: <https://github.com/felis/USB_Host_Shield_2.0/blob/master/examples/Bluetooth/Wii/Wii.ino>.

54
SPP.cpp
View file

@ -16,7 +16,7 @@
*/
#include "SPP.h"
// To enable serial debugging uncomment "#define DEBUG_USB_HOST" in message.h
// To enable serial debugging see "settings.h"
//#define EXTRADEBUG // Uncomment to get even more debugging data
//#define PRINTREPORT // Uncomment to print the report sent to the Arduino
@ -270,19 +270,31 @@ void SPP::ACLData(uint8_t* l2capinbuf) {
/* Read the incoming message */
if (rfcommChannelType == RFCOMM_UIH && rfcommChannel == rfcommChannelConnection) {
uint8_t length = l2capinbuf[10] >> 1; // Get length
uint8_t offset = l2capinbuf[4] - length - 4; // See if there is credit
if (rfcommAvailable + length <= sizeof (rfcommDataBuffer)) { // Don't add data to buffer if it would be full
for (uint8_t i = 0; i < length; i++)
uint8_t offset = l2capinbuf[4] - length - 4; // Check if there is credit
if (checkFcs(&l2capinbuf[8], l2capinbuf[11 + length + offset])) {
uint8_t i = 0;
for (; i < length; i++) {
if (rfcommAvailable + i >= sizeof (rfcommDataBuffer)) {
#ifdef DEBUG_USB_HOST
Notify(PSTR("\r\nWarning: Buffer is full!"), 0x80);
#endif
break;
}
rfcommDataBuffer[rfcommAvailable + i] = l2capinbuf[11 + i + offset];
rfcommAvailable += length;
}
}
rfcommAvailable += i;
#ifdef EXTRADEBUG
Notify(PSTR("\r\nRFCOMM Data Available: "), 0x80);
Notify(rfcommAvailable, 0x80);
if (offset) {
Notify(PSTR(" - Credit: 0x"), 0x80);
D_PrintHex<uint8_t > (l2capinbuf[11], 0x80);
Notify(PSTR("\r\nRFCOMM Data Available: "), 0x80);
Notify(rfcommAvailable, 0x80);
if (offset) {
Notify(PSTR(" - Credit: 0x"), 0x80);
D_PrintHex<uint8_t > (l2capinbuf[11], 0x80);
}
#endif
}
#ifdef DEBUG_USB_HOST
else
Notify(PSTR("\r\nError in FCS checksum!"), 0x80);
#endif
#ifdef PRINTREPORT // Uncomment "#define PRINTREPORT" to print the report send to the Arduino via Bluetooth
for (uint8_t i = 0; i < length; i++)
@ -723,16 +735,24 @@ void SPP::sendRfcommCredit(uint8_t channel, uint8_t direction, uint8_t CR, uint8
}
/* CRC on 2 bytes */
uint8_t SPP::__crc(uint8_t* data) {
return (pgm_read_byte(&rfcomm_crc_table[pgm_read_byte(&rfcomm_crc_table[0xff ^ data[0]]) ^ data[1]]));
uint8_t SPP::crc(uint8_t *data) {
return (pgm_read_byte(&rfcomm_crc_table[pgm_read_byte(&rfcomm_crc_table[0xFF ^ data[0]]) ^ data[1]]));
}
/* Calculate FCS - we never actually check if the host sends correct FCS to the Arduino */
/* Calculate FCS */
uint8_t SPP::calcFcs(uint8_t *data) {
if ((data[1] & 0xEF) == RFCOMM_UIH)
return (0xff - __crc(data)); // FCS on 2 bytes
return (0xFF - crc(data)); // FCS on 2 bytes
else
return (0xff - pgm_read_byte(&rfcomm_crc_table[__crc(data) ^ data[2]])); // FCS on 3 bytes
return (0xFF - pgm_read_byte(&rfcomm_crc_table[crc(data) ^ data[2]])); // FCS on 3 bytes
}
/* Check FCS */
bool SPP::checkFcs(uint8_t *data, uint8_t fcs) {
uint8_t temp = crc(data);
if ((data[1] & 0xEF) != RFCOMM_UIH)
temp = pgm_read_byte(&rfcomm_crc_table[temp ^ data[2]]); // FCS on 3 bytes
return (pgm_read_byte(&rfcomm_crc_table[temp ^ fcs]) == 0xCF);
}
/* Serial commands */
@ -740,7 +760,7 @@ size_t SPP::write(uint8_t data) {
return write(&data,1);
}
size_t SPP::write(const uint8_t* data, size_t size) {
size_t SPP::write(const uint8_t *data, size_t size) {
for(uint8_t i = 0; i < size; i++) {
if(sppIndex >= sizeof(sppOutputBuffer)/sizeof(sppOutputBuffer[0]))
send(); // Send the current data in the buffer

9
SPP.h
View file

@ -215,7 +215,7 @@ private:
void RFCOMM_task(); // RFCOMM state machine
/* SDP Commands */
void SDP_Command(uint8_t* data, uint8_t nbytes);
void SDP_Command(uint8_t *data, uint8_t nbytes);
void serviceNotSupported(uint8_t transactionIDHigh, uint8_t transactionIDLow);
void serialPortResponse1(uint8_t transactionIDHigh, uint8_t transactionIDLow);
void serialPortResponse2(uint8_t transactionIDHigh, uint8_t transactionIDLow);
@ -223,10 +223,11 @@ private:
void l2capResponse2(uint8_t transactionIDHigh, uint8_t transactionIDLow);
/* RFCOMM Commands */
void RFCOMM_Command(uint8_t* data, uint8_t nbytes);
void sendRfcomm(uint8_t channel, uint8_t direction, uint8_t CR, uint8_t channelType, uint8_t pfBit, uint8_t* data, uint8_t length);
void RFCOMM_Command(uint8_t *data, uint8_t nbytes);
void sendRfcomm(uint8_t channel, uint8_t direction, uint8_t CR, uint8_t channelType, uint8_t pfBit, uint8_t *data, uint8_t length);
void sendRfcommCredit(uint8_t channel, uint8_t direction, uint8_t CR, uint8_t channelType, uint8_t pfBit, uint8_t credit);
uint8_t calcFcs(uint8_t *data);
uint8_t __crc(uint8_t* data);
bool checkFcs(uint8_t *data, uint8_t fcs);
uint8_t crc(uint8_t *data);
};
#endif

7
Usb.cpp
View file

@ -567,6 +567,7 @@ uint8_t USB::DefaultAddressing(uint8_t parent, uint8_t port, bool lowspeed) {
uint8_t USB::AttemptConfig(uint8_t driver, uint8_t parent, uint8_t port, bool lowspeed) {
//printf("AttemptConfig: parent = %i, port = %i\r\n", parent, port);
uint8_t retries = 0;
again:
uint8_t rcode = devConfig[driver]->ConfigureDevice(parent, port, lowspeed);
@ -579,15 +580,17 @@ again:
// reset parent port
devConfig[parent]->ResetHubPort(port);
}
} else if (rcode == hrJERR) { // Some devices returns this when plugged in - trying to initialize the device again usually works
} else if (rcode == hrJERR && retries < 3) { // Some devices returns this when plugged in - trying to initialize the device again usually works
delay(100);
retries++;
goto again;
} else if (rcode)
return rcode;
rcode = devConfig[driver]->Init(parent, port, lowspeed);
if (rcode == hrJERR) { // Some devices returns this when plugged in - trying to initialize the device again usually works
if (rcode == hrJERR && retries < 3) { // Some devices returns this when plugged in - trying to initialize the device again usually works
delay(100);
retries++;
goto again;
}
if (rcode) {

8
Wii.cpp
View file

@ -18,7 +18,7 @@
*/
#include "Wii.h"
// To enable serial debugging uncomment "#define DEBUG_USB_HOST" in message.h
// To enable serial debugging see "settings.h"
//#define EXTRADEBUG // Uncomment to get even more debugging data
//#define PRINTREPORT // Uncomment to print the report send by the Wii controllers
@ -473,11 +473,11 @@ void WII::ACLData(uint8_t* l2capinbuf) {
pitchGyroSpeed = (double)gyroPitchRaw / ((double)gyroPitchZero / pitchGyroScale);
/* The onboard gyro has two ranges for slow and fast mode */
if (!(l2capinbuf[18] & 0x02)) // Check if fast more is used
if (!(l2capinbuf[18] & 0x02)) // Check if fast mode is used
yawGyroSpeed *= 4.545;
if (!(l2capinbuf[18] & 0x01)) // Check if fast more is used
if (!(l2capinbuf[18] & 0x01)) // Check if fast mode is used
pitchGyroSpeed *= 4.545;
if (!(l2capinbuf[19] & 0x02)) // Check if fast more is used
if (!(l2capinbuf[19] & 0x02)) // Check if fast mode is used
rollGyroSpeed *= 4.545;
compPitch = (0.93 * (compPitch + (pitchGyroSpeed * (double)(micros() - timer) / 1000000)))+(0.07 * getWiimotePitch()); // Use a complimentary filter to calculate the angle

6
Wii.h
View file

@ -191,6 +191,10 @@ public:
* @param value See: ::LED enum.
*/
void setLedRaw(uint8_t value);
/** Turn all LEDs off. */
void setLedOff() {
setLedRaw(0);
}
/**
* Turn the specific ::LED off.
* @param a The ::LED to turn off.
@ -210,9 +214,7 @@ public:
* This will set the LEDs, so the user can see which connections are active.
*
* The first ::LED indicate that the Wiimote is connected,
*
* the second ::LED indicate indicate that a Motion Plus is also connected
*
* the third ::LED will indicate that a Nunchuck controller is also connected.
*/
void setLedStatus();

4
WiiCameraReadme.md
View file

@ -1,8 +1,6 @@
Please see <http://wiibrew.org/wiki/Wiimote#IR_Camera> for the complete capabilities of the Wii camera. The IR camera code was written based on the above website and with support from Kristian Lauszus.
Must omit the "." in the name of the USB\_Host\_Shiled\_2.0 library folder when inserting into the Arudino library folder.
This library is large, if you run into memory problems when uploading to the Arduino, comment out the \#define DEBUG in the BTD.cpp and Wii.cpp files.
This library is large, if you run into memory problems when uploading to the Arduino, disable serial debugging.
To enable the IR camera code, uncomment \#define WIICAMERA in Wii.h.

11
XBOXOLD.cpp
View file

@ -16,7 +16,7 @@
*/
#include "XBOXOLD.h"
// To enable serial debugging uncomment "#define DEBUG_USB_HOST" in message.h
// To enable serial debugging see "settings.h"
//#define EXTRADEBUG // Uncomment to get even more debugging data
//#define PRINTREPORT // Uncomment to print the report send by the Xbox controller
@ -291,15 +291,15 @@ void XBOXOLD::printReport(uint16_t length) { //Uncomment "#define PRINTREPORT" t
}
uint8_t XBOXOLD::getButtonPress(Button b) {
uint8_t button = pgm_read_byte(&XBOXOLDBUTTONS[(uint8_t)b]);
if (b == A || b == B || b == X || b == Y || b == BLACK || b == WHITE || b == L1 || b == R1) // A, B, X, Y, BLACK, WHITE, L1, and R1 are analog buttons
return buttonValues[pgm_read_byte(&XBOXOLDBUTTONS[(uint8_t)b])]; // Analog buttons
return (ButtonState & pgm_read_byte(&XBOXOLDBUTTONS[(uint8_t)b])); // Digital buttons
return buttonValues[button]; // Analog buttons
return (ButtonState & button); // Digital buttons
}
bool XBOXOLD::getButtonClick(Button b) {
uint8_t button;
uint8_t button = pgm_read_byte(&XBOXOLDBUTTONS[(uint8_t)b]);
if (b == A || b == B || b == X || b == Y || b == BLACK || b == WHITE || b == L1 || b == R1) { // A, B, X, Y, BLACK, WHITE, L1, and R1 are analog buttons
button = pgm_read_byte(&XBOXOLDBUTTONS[(uint8_t)b]);
if (buttonClicked[button]) {
buttonClicked[button] = false;
return true;
@ -307,7 +307,6 @@ bool XBOXOLD::getButtonClick(Button b) {
return false;
}
button = pgm_read_byte(&XBOXOLDBUTTONS[(uint8_t)b]); // Digital buttons
bool click = (ButtonClickState & button);
ButtonClickState &= ~button; // clear "click" event
return click;

191
XBOXRECV.cpp
View file

@ -18,7 +18,7 @@
*/
#include "XBOXRECV.h"
// To enable serial debugging uncomment "#define DEBUG_USB_HOST" in message.h
// To enable serial debugging see "settings.h"
//#define EXTRADEBUG // Uncomment to get even more debugging data
//#define PRINTREPORT // Uncomment to print the report send by the Xbox 360 Controller
@ -37,30 +37,28 @@ bPollEnable(false) { // don't start polling before dongle is connected
pUsb->RegisterDeviceClass(this); //set devConfig[] entry
}
uint8_t XBOXRECV::Init(uint8_t parent, uint8_t port, bool lowspeed) {
uint8_t buf[sizeof (USB_DEVICE_DESCRIPTOR)];
uint8_t XBOXRECV::ConfigureDevice(uint8_t parent, uint8_t port, bool lowspeed) {
const uint8_t constBufSize = sizeof (USB_DEVICE_DESCRIPTOR);
uint8_t buf[constBufSize];
USB_DEVICE_DESCRIPTOR * udd = reinterpret_cast<USB_DEVICE_DESCRIPTOR*>(buf);
uint8_t rcode;
UsbDevice *p = NULL;
EpInfo *oldep_ptr = NULL;
uint16_t PID;
uint16_t VID;
uint16_t PID, VID;
// get memory address of USB device address pool
AddressPool &addrPool = pUsb->GetAddressPool();
AddressPool &addrPool = pUsb->GetAddressPool(); // Get memory address of USB device address pool
#ifdef EXTRADEBUG
Notify(PSTR("\r\nXBOXRECV Init"), 0x80);
#endif
// check if address has already been assigned to an instance
if (bAddress) {
if (bAddress) { // Check if address has already been assigned to an instance
#ifdef DEBUG_USB_HOST
Notify(PSTR("\r\nAddress in use"), 0x80);
#endif
return USB_ERROR_CLASS_INSTANCE_ALREADY_IN_USE;
}
// Get pointer to pseudo device with address 0 assigned
p = addrPool.GetUsbDevicePtr(0);
p = addrPool.GetUsbDevicePtr(0); // Get pointer to pseudo device with address 0 assigned
if (!p) {
#ifdef DEBUG_USB_HOST
@ -76,18 +74,13 @@ uint8_t XBOXRECV::Init(uint8_t parent, uint8_t port, bool lowspeed) {
return USB_ERROR_EPINFO_IS_NULL;
}
// Save old pointer to EP_RECORD of address 0
oldep_ptr = p->epinfo;
// Temporary assign new pointer to epInfo to p->epinfo in order to avoid toggle inconsistence
p->epinfo = epInfo;
oldep_ptr = p->epinfo; // Save old pointer to EP_RECORD of address 0
p->epinfo = epInfo; // Temporary assign new pointer to epInfo to p->epinfo in order to avoid toggle inconsistence
p->lowspeed = lowspeed;
// Get device descriptor
rcode = pUsb->getDevDescr(0, 0, sizeof (USB_DEVICE_DESCRIPTOR), (uint8_t*)buf); // Get device descriptor - addr, ep, nbytes, data
// Restore p->epinfo
p->epinfo = oldep_ptr;
rcode = pUsb->getDevDescr(0, 0, constBufSize, (uint8_t*)buf); // Get device descriptor - addr, ep, nbytes, data
p->epinfo = oldep_ptr; // Restore p->epinfo
if (rcode)
goto FailGetDevDescr;
@ -95,53 +88,101 @@ uint8_t XBOXRECV::Init(uint8_t parent, uint8_t port, bool lowspeed) {
VID = udd->idVendor;
PID = udd->idProduct;
if (VID != XBOX_VID && VID != MADCATZ_VID) // We just check if it's a Xbox receiver using the Vendor ID
goto FailUnknownDevice;
else if (PID != XBOX_WIRELESS_RECEIVER_PID && PID != XBOX_WIRELESS_RECEIVER_THIRD_PARTY_PID) { // Check the PID as well
if ((VID != XBOX_VID && VID != MADCATZ_VID) || (PID != XBOX_WIRELESS_RECEIVER_PID && PID != XBOX_WIRELESS_RECEIVER_THIRD_PARTY_PID)) { // Check if it's a Xbox receiver using the Vendor ID and Product ID
#ifdef DEBUG_USB_HOST
Notify(PSTR("\r\nYou'll need a wireless receiver for this libary to work"), 0x80);
#endif
goto FailUnknownDevice;
}
// Allocate new address according to device class
bAddress = addrPool.AllocAddress(parent, false, port);
bAddress = addrPool.AllocAddress(parent, false, port); // Allocate new address according to device class
if (!bAddress)
if (!bAddress) {
#ifdef DEBUG_USB_HOST
Notify(PSTR("\r\nOut of address space"), 0x80);
#endif
return USB_ERROR_OUT_OF_ADDRESS_SPACE_IN_POOL;
}
// Extract Max Packet Size from device descriptor
epInfo[0].maxPktSize = udd->bMaxPacketSize0;
epInfo[1].epAddr = udd->bNumConfigurations; // Steal and abuse from epInfo structure to save memory
// Assign new address to the device
rcode = pUsb->setAddr(0, 0, bAddress);
delay(20); // Wait a little before resetting device
return USB_ERROR_CONFIG_REQUIRES_ADDITIONAL_RESET;
/* Diagnostic messages */
FailGetDevDescr:
#ifdef DEBUG_USB_HOST
NotifyFailGetDevDescr(rcode);
#endif
if (rcode != hrJERR)
rcode = USB_ERROR_FailGetDevDescr;
goto Fail;
FailUnknownDevice:
#ifdef DEBUG_USB_HOST
NotifyFailUnknownDevice(VID,PID);
#endif
rcode = USB_DEV_CONFIG_ERROR_DEVICE_NOT_SUPPORTED;
Fail:
#ifdef DEBUG_USB_HOST
Notify(PSTR("\r\nXbox 360 Init Failed, error code: "), 0x80);
NotifyFail(rcode);
#endif
Release();
return rcode;
};
uint8_t XBOXRECV::Init(uint8_t parent, uint8_t port, bool lowspeed) {
uint8_t rcode;
uint8_t num_of_conf = epInfo[1].epAddr; // Number of configurations
epInfo[1].epAddr = 0;
AddressPool &addrPool = pUsb->GetAddressPool();
#ifdef EXTRADEBUG
Notify(PSTR("\r\nBTD Init"), 0x80);
#endif
UsbDevice *p = addrPool.GetUsbDevicePtr(bAddress); // Get pointer to assigned address record
if (!p) {
#ifdef DEBUG_USB_HOST
Notify(PSTR("\r\nAddress not found"), 0x80);
#endif
return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL;
}
delay(300); // Assign new address to the device
rcode = pUsb->setAddr(0, 0, bAddress); // Assign new address to the device
if (rcode) {
p->lowspeed = false;
addrPool.FreeAddress(bAddress);
bAddress = 0;
#ifdef DEBUG_USB_HOST
Notify(PSTR("\r\nsetAddr: "), 0x80);
D_PrintHex<uint8_t > (rcode, 0x80);
#endif
return rcode;
p->lowspeed = false;
goto Fail;
}
#ifdef EXTRADEBUG
Notify(PSTR("\r\nAddr: "), 0x80);
D_PrintHex<uint8_t > (bAddress, 0x80);
#endif
delay(300); // Spec says you should wait at least 200ms
p->lowspeed = false;
//get pointer to assigned address record
p = addrPool.GetUsbDevicePtr(bAddress);
if (!p)
p = addrPool.GetUsbDevicePtr(bAddress); // Get pointer to assigned address record
if (!p) {
#ifdef DEBUG_USB_HOST
Notify(PSTR("\r\nAddress not found"), 0x80);
#endif
return USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL;
}
p->lowspeed = lowspeed;
// Assign epInfo to epinfo pointer - only EP0 is known
rcode = pUsb->setEpInfoEntry(bAddress, 1, epInfo);
rcode = pUsb->setEpInfoEntry(bAddress, 1, epInfo); // Assign epInfo to epinfo pointer - only EP0 is known
if (rcode)
goto FailSetDevTblEntry;
@ -217,9 +258,10 @@ uint8_t XBOXRECV::Init(uint8_t parent, uint8_t port, bool lowspeed) {
#endif
XboxReceiverConnected = true;
bPollEnable = true;
return 0; // successful configuration
checkStatusTimer = 0; // Reset timer
return 0; // Successful configuration
/* diagnostic messages */
/* Diagnostic messages */
FailGetDevDescr:
#ifdef DEBUG_USB_HOST
NotifyFailGetDevDescr();
@ -243,8 +285,8 @@ FailUnknownDevice:
#endif
rcode = USB_DEV_CONFIG_ERROR_DEVICE_NOT_SUPPORTED;
#ifdef DEBUG_USB_HOST
Fail:
#ifdef DEBUG_USB_HOST
Notify(PSTR("\r\nXbox 360 Init Failed, error code: "), 0x80);
NotifyFail(rcode);
#endif
@ -266,23 +308,23 @@ uint8_t XBOXRECV::Release() {
uint8_t XBOXRECV::Poll() {
if (!bPollEnable)
return 0;
if (!timer || ((millis() - timer) > 3000)) { // Run checkStatus every 3 seconds
timer = millis();
if (!checkStatusTimer || ((millis() - checkStatusTimer) > 3000)) { // Run checkStatus every 3 seconds
checkStatusTimer = millis();
checkStatus();
}
uint8_t inputPipe;
uint16_t bufferSize;
for (uint8_t i = 0; i < 4; i++) {
switch (i) {
case 0: inputPipe = XBOX_INPUT_PIPE_1;
break;
case 1: inputPipe = XBOX_INPUT_PIPE_2;
break;
case 2: inputPipe = XBOX_INPUT_PIPE_3;
break;
case 3: inputPipe = XBOX_INPUT_PIPE_4;
break;
}
if (i == 0)
inputPipe = XBOX_INPUT_PIPE_1;
else if (i == 1)
inputPipe = XBOX_INPUT_PIPE_2;
else if (i == 2)
inputPipe = XBOX_INPUT_PIPE_3;
else
inputPipe = XBOX_INPUT_PIPE_4;
bufferSize = EP_MAXPKTSIZE; // This is the maximum number of bytes we want to receive
pUsb->inTransfer(bAddress, epInfo[ inputPipe ].epAddr, &bufferSize, readBuf);
if (bufferSize > 0) { // The number of received bytes
@ -420,22 +462,22 @@ bool XBOXRECV::buttonChanged(uint8_t controller) {
/*
ControllerStatus Breakdown
ControllerStatus[controller] & 0x0001 // 0
ControllerStatus[controller] & 0x0002 // normal batteries, no rechargeable battery pack
ControllerStatus[controller] & 0x0004 // controller starting up / settling
ControllerStatus[controller] & 0x0008 // headset adapter plugged in, but no headphones connected (mute?)
ControllerStatus[controller] & 0x0010 // 0
ControllerStatus[controller] & 0x0020 // 1
ControllerStatus[controller] & 0x0040 // battery level (high bit)
ControllerStatus[controller] & 0x0080 // battery level (low bit)
ControllerStatus[controller] & 0x0100 // 1
ControllerStatus[controller] & 0x0200 // 1
ControllerStatus[controller] & 0x0400 // headset adapter plugged in
ControllerStatus[controller] & 0x0800 // 0
ControllerStatus[controller] & 0x1000 // 1
ControllerStatus[controller] & 0x2000 // 0
ControllerStatus[controller] & 0x4000 // 0
ControllerStatus[controller] & 0x8000 // 0
ControllerStatus[controller] & 0x0001 // 0
ControllerStatus[controller] & 0x0002 // normal batteries, no rechargeable battery pack
ControllerStatus[controller] & 0x0004 // controller starting up / settling
ControllerStatus[controller] & 0x0008 // headset adapter plugged in, but no headphones connected (mute?)
ControllerStatus[controller] & 0x0010 // 0
ControllerStatus[controller] & 0x0020 // 1
ControllerStatus[controller] & 0x0040 // battery level (high bit)
ControllerStatus[controller] & 0x0080 // battery level (low bit)
ControllerStatus[controller] & 0x0100 // 1
ControllerStatus[controller] & 0x0200 // 1
ControllerStatus[controller] & 0x0400 // headset adapter plugged in
ControllerStatus[controller] & 0x0800 // 0
ControllerStatus[controller] & 0x1000 // 1
ControllerStatus[controller] & 0x2000 // 0
ControllerStatus[controller] & 0x4000 // 0
ControllerStatus[controller] & 0x8000 // 0
*/
uint8_t XBOXRECV::getBatteryLevel(uint8_t controller) {
return ((controllerStatus[controller] & 0x00C0) >> 6);
@ -468,6 +510,15 @@ void XBOXRECV::XboxCommand(uint8_t controller, uint8_t* data, uint16_t nbytes) {
#endif
}
void XBOXRECV::disconnect(uint8_t controller) {
writeBuf[0] = 0x00;
writeBuf[1] = 0x00;
writeBuf[2] = 0x08;
writeBuf[3] = 0xC0;
XboxCommand(controller, writeBuf, 4);
}
void XBOXRECV::setLedRaw(uint8_t value, uint8_t controller) {
writeBuf[0] = 0x00;
writeBuf[1] = 0x00;

16
XBOXRECV.h
View file

@ -64,6 +64,14 @@ public:
XBOXRECV(USB *pUsb);
/** @name USBDeviceConfig implementation */
/**
* Address assignment and basic initilization is done here.
* @param parent Hub number.
* @param port Port number on the hub.
* @param lowspeed Speed of the device.
* @return 0 on success.
*/
virtual uint8_t ConfigureDevice(uint8_t parent, uint8_t port, bool lowspeed);
/**
* Initialize the Xbox wireless receiver.
* @param parent Hub number.
@ -136,6 +144,12 @@ public:
*/
int16_t getAnalogHat(AnalogHat a, uint8_t controller = 0);
/**
* Used to disconnect any of the controllers.
* @param controller The controller to disconnect. Default to 0.
*/
void disconnect(uint8_t controller = 0);
/**
* Turn rumble off and all the LEDs on the specific controller.
* @param controller The controller to write to. Default to 0.
@ -251,7 +265,7 @@ private:
bool L2Clicked[4]; // These buttons are analog, so we use we use these bools to check if they where clicked or not
bool R2Clicked[4];
unsigned long timer; // Timing for checkStatus() signals
uint32_t checkStatusTimer; // Timing for checkStatus() signals
uint8_t readBuf[EP_MAXPKTSIZE]; // General purpose buffer for input data
uint8_t writeBuf[7]; // General purpose buffer for output data

4
XBOXUSB.cpp
View file

@ -16,7 +16,7 @@
*/
#include "XBOXUSB.h"
// To enable serial debugging uncomment "#define DEBUG_USB_HOST" in message.h
// To enable serial debugging see "settings.h"
//#define EXTRADEBUG // Uncomment to get even more debugging data
//#define PRINTREPORT // Uncomment to print the report send by the Xbox 360 Controller
@ -283,7 +283,7 @@ uint8_t XBOXUSB::getButtonPress(Button b) {
return (uint8_t)(ButtonState >> 8);
else if (b == R2)
return (uint8_t)ButtonState;
return (ButtonState & ((uint32_t)pgm_read_word(&XBOXBUTTONS[(uint8_t)b]) << 16));
return (bool)(ButtonState & ((uint32_t)pgm_read_word(&XBOXBUTTONS[(uint8_t)b]) << 16));
}
bool XBOXUSB::getButtonClick(Button b) {

87
adk.cpp
View file

@ -13,7 +13,7 @@ Contact information
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
*/
/* Google ADK interface */
@ -30,7 +30,6 @@ ADK::ADK(USB *p, const char* manufacturer,
const char* serial) :
/* ADK ID Strings */
manufacturer(manufacturer),
model(model),
description(description),
@ -46,12 +45,10 @@ ready(false) {
for (uint8_t i = 0; i < ADK_MAX_ENDPOINTS; i++) {
epInfo[i].epAddr = 0;
epInfo[i].maxPktSize = (i) ? 0 : 8;
epInfo[i].epAttribs = (0xfc & (USB_NAK_MAX_POWER << 2));
epInfo[i].epAttribs = 0;
epInfo[i].bmNakPower = (i) ? USB_NAK_NOWAIT : USB_NAK_MAX_POWER;
}//for(uint8_t i=0; i<ADK_MAX_ENDPOINTS; i++...
//set bulk-IN EP naklimit to 1
epInfo[epDataInIndex].epAttribs = (0xfc & (USB_NAK_NOWAIT << 2));
// register in USB subsystem
if (pUsb) {
pUsb->RegisterDeviceClass(this); //set devConfig[] entry
@ -64,7 +61,6 @@ uint8_t ADK::ConfigureDevice(uint8_t parent, uint8_t port, bool lowspeed) {
/* Connection initialization of an Android phone */
uint8_t ADK::Init(uint8_t parent, uint8_t port, bool lowspeed) {
uint8_t buf[sizeof (USB_DEVICE_DESCRIPTOR)];
USB_DEVICE_DESCRIPTOR * udd = reinterpret_cast<USB_DEVICE_DESCRIPTOR*>(buf);
uint8_t rcode;
@ -119,6 +115,7 @@ uint8_t ADK::Init(uint8_t parent, uint8_t port, bool lowspeed) {
// Extract Max Packet Size from device descriptor
epInfo[0].maxPktSize = udd->bMaxPacketSize0;
// Assign new address to the device
rcode = pUsb->setAddr(0, 0, bAddress);
if (rcode) {
@ -157,10 +154,18 @@ uint8_t ADK::Init(uint8_t parent, uint8_t port, bool lowspeed) {
num_of_conf = udd->bNumConfigurations;
//USBTRACE2("\r\nNC:",num_of_conf);
for (uint8_t i = 0; i < num_of_conf; i++) {
ConfigDescParser < 0, 0, 0, 0 > confDescrParser(this);
delay(1);
rcode = pUsb->getConfDescr(bAddress, 0, i, &confDescrParser);
#if defined(XOOM)
//added by Jaylen Scott Vanorden
if (rcode) {
USBTRACE2("\r\nGot 1st bad code for config: ", rcode);
// Try once more
rcode = pUsb->getConfDescr(bAddress, 0, i, &confDescrParser);
}
#endif
if (rcode) {
goto FailGetConfDescr;
}
@ -177,27 +182,27 @@ uint8_t ADK::Init(uint8_t parent, uint8_t port, bool lowspeed) {
}
}
// Set Configuration Value
rcode = pUsb->setConf(bAddress, 0, bConfNum);
if (rcode) {
goto FailSetConfDescr;
}
/* print endpoint structure */
// USBTRACE("\r\nEndpoint Structure:");
// USBTRACE("\r\nEP0:");
// USBTRACE2("\r\nAddr: ", epInfo[0].epAddr );
// USBTRACE2("\r\nMax.pkt.size: ", epInfo[0].maxPktSize );
// USBTRACE2("\r\nAttr: ", epInfo[0].epAttribs );
// USBTRACE("\r\nEpout:");
// USBTRACE2("\r\nAddr: ", epInfo[epDataOutIndex].epAddr );
// USBTRACE2("\r\nMax.pkt.size: ", epInfo[epDataOutIndex].maxPktSize );
// USBTRACE2("\r\nAttr: ", epInfo[epDataOutIndex].epAttribs );
// USBTRACE("\r\nEpin:");
// USBTRACE2("\r\nAddr: ", epInfo[epDataInIndex].epAddr );
// USBTRACE2("\r\nMax.pkt.size: ", epInfo[epDataInIndex].maxPktSize );
// USBTRACE2("\r\nAttr: ", epInfo[epDataInIndex].epAttribs );
/*
USBTRACE("\r\nEndpoint Structure:");
USBTRACE("\r\nEP0:");
USBTRACE2("\r\nAddr: ", epInfo[0].epAddr);
USBTRACE2("\r\nMax.pkt.size: ", epInfo[0].maxPktSize);
USBTRACE2("\r\nAttr: ", epInfo[0].epAttribs);
USBTRACE("\r\nEpout:");
USBTRACE2("\r\nAddr: ", epInfo[epDataOutIndex].epAddr);
USBTRACE2("\r\nMax.pkt.size: ", epInfo[epDataOutIndex].maxPktSize);
USBTRACE2("\r\nAttr: ", epInfo[epDataOutIndex].epAttribs);
USBTRACE("\r\nEpin:");
USBTRACE2("\r\nAddr: ", epInfo[epDataInIndex].epAddr);
USBTRACE2("\r\nMax.pkt.size: ", epInfo[epDataInIndex].maxPktSize);
USBTRACE2("\r\nAttr: ", epInfo[epDataInIndex].epAttribs);
*/
USBTRACE("\r\nConfiguration successful");
ready = true;
@ -207,7 +212,16 @@ uint8_t ADK::Init(uint8_t parent, uint8_t port, bool lowspeed) {
//probe device - get accessory protocol revision
{
uint16_t adkproto = -1;
delay(1);
rcode = getProto((uint8_t*) & adkproto);
#if defined(XOOM)
//added by Jaylen Scott Vanorden
if (rcode) {
USBTRACE2("\r\nGot 1st bad code for proto: ", rcode);
// Try once more
rcode = getProto((uint8_t*) & adkproto);
}
#endif
if (rcode) {
goto FailGetProto; //init fails
}
@ -269,7 +283,7 @@ FailSwAcc:
goto Fail;
#endif
//FailOnInit:
//FailOnInit:
// USBTRACE("OnInit:");
// goto Fail;
//
@ -286,9 +300,9 @@ Fail:
/* Extracts bulk-IN and bulk-OUT endpoint information from config descriptor */
void ADK::EndpointXtract(uint8_t conf, uint8_t iface, uint8_t alt, uint8_t proto, const USB_ENDPOINT_DESCRIPTOR *pep) {
//ErrorMessage<uint8_t>(PSTR("Conf.Val"), conf);
//ErrorMessage<uint8_t>(PSTR("Iface Num"),iface);
//ErrorMessage<uint8_t>(PSTR("Alt.Set"), alt);
//ErrorMessage<uint8_t>(PSTR("Conf.Val"), conf);
//ErrorMessage<uint8_t>(PSTR("Iface Num"), iface);
//ErrorMessage<uint8_t>(PSTR("Alt.Set"), alt);
//added by Yuuichi Akagawa
if (bNumEP == 3) {
@ -297,19 +311,16 @@ void ADK::EndpointXtract(uint8_t conf, uint8_t iface, uint8_t alt, uint8_t proto
bConfNum = conf;
uint8_t index;
if ((pep->bmAttributes & 0x02) == 2) {
uint8_t index = ((pep->bEndpointAddress & 0x80) == 0x80) ? epDataInIndex : epDataOutIndex;
// Fill in the endpoint info structure
epInfo[index].epAddr = (pep->bEndpointAddress & 0x0F);
epInfo[index].maxPktSize = (uint8_t)pep->wMaxPacketSize;
// if ((pep->bmAttributes & 0x02) == 2) {
index = ((pep->bEndpointAddress & 0x80) == 0x80) ? epDataInIndex : epDataOutIndex;
// }
bNumEP++;
// Fill in the endpoint info structure
epInfo[index].epAddr = (pep->bEndpointAddress & 0x0F);
epInfo[index].maxPktSize = (uint8_t)pep->wMaxPacketSize;
bNumEP++;
//PrintEndpointDescriptor(pep);
//PrintEndpointDescriptor(pep);
}
}
/* Performs a cleanup after failed Init() attempt */

6
adk.h
View file

@ -13,7 +13,7 @@ Contact information
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
*/
/* Google ADK interface support header */
@ -26,6 +26,10 @@ e-mail : support@circuitsathome.com
#define ADK_PID 0x2D00
#define ADB_PID 0x2D01
#define XOOM //enables repeating getProto() and getConf() attempts
//necessary for slow devices such as Motorola XOOM
//defined by default, can be commented out to save memory
/* requests */
#define ADK_GETPROTO 51 //check USB accessory protocol version

89
examples/Bluetooth/PS3BT/PS3BT.ino
View file

@ -8,7 +8,8 @@
#include <usbhub.h>
USB Usb;
USBHub Hub1(&Usb); // Some dongles have a hub inside
//USBHub Hub1(&Usb); // Some dongles have a hub inside
BTD Btd(&Usb); // You have to create the Bluetooth Dongle instance like so
/* You can create the instance of the class in two ways */
PS3BT PS3(&Btd); // This will just create the instance
@ -22,20 +23,20 @@ void setup() {
while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
if (Usb.Init() == -1) {
Serial.print(F("\r\nOSC did not start"));
while(1); //halt
while (1); //halt
}
Serial.print(F("\r\nPS3 Bluetooth Library Started"));
}
void loop() {
Usb.Task();
if(PS3.PS3Connected || PS3.PS3NavigationConnected) {
if(PS3.getAnalogHat(LeftHatX) > 137 || PS3.getAnalogHat(LeftHatX) < 117 || PS3.getAnalogHat(LeftHatY) > 137 || PS3.getAnalogHat(LeftHatY) < 117 || PS3.getAnalogHat(RightHatX) > 137 || PS3.getAnalogHat(RightHatX) < 117 || PS3.getAnalogHat(RightHatY) > 137 || PS3.getAnalogHat(RightHatY) < 117) {
if (PS3.PS3Connected || PS3.PS3NavigationConnected) {
if (PS3.getAnalogHat(LeftHatX) > 137 || PS3.getAnalogHat(LeftHatX) < 117 || PS3.getAnalogHat(LeftHatY) > 137 || PS3.getAnalogHat(LeftHatY) < 117 || PS3.getAnalogHat(RightHatX) > 137 || PS3.getAnalogHat(RightHatX) < 117 || PS3.getAnalogHat(RightHatY) > 137 || PS3.getAnalogHat(RightHatY) < 117) {
Serial.print(F("\r\nLeftHatX: "));
Serial.print(PS3.getAnalogHat(LeftHatX));
Serial.print(F("\tLeftHatY: "));
Serial.print(PS3.getAnalogHat(LeftHatY));
if(!PS3.PS3NavigationConnected) {
if (PS3.PS3Connected) { // The Navigation controller only have one joystick
Serial.print(F("\tRightHatX: "));
Serial.print(PS3.getAnalogHat(RightHatX));
Serial.print(F("\tRightHatY: "));
@ -43,131 +44,131 @@ void loop() {
}
}
//Analog button values can be read from almost all buttons
if(PS3.getAnalogButton(L2) || PS3.getAnalogButton(R2)) {
// Analog button values can be read from almost all buttons
if (PS3.getAnalogButton(L2) || PS3.getAnalogButton(R2)) {
Serial.print(F("\r\nL2: "));
Serial.print(PS3.getAnalogButton(L2));
if(!PS3.PS3NavigationConnected) {
if (!PS3.PS3NavigationConnected) {
Serial.print(F("\tR2: "));
Serial.print(PS3.getAnalogButton(R2));
}
}
if(PS3.getButtonClick(PS)) {
if (PS3.getButtonClick(PS)) {
Serial.print(F("\r\nPS"));
PS3.disconnect();
}
else {
if(PS3.getButtonClick(TRIANGLE))
if (PS3.getButtonClick(TRIANGLE))
Serial.print(F("\r\nTraingle"));
if(PS3.getButtonClick(CIRCLE))
if (PS3.getButtonClick(CIRCLE))
Serial.print(F("\r\nCircle"));
if(PS3.getButtonClick(CROSS))
if (PS3.getButtonClick(CROSS))
Serial.print(F("\r\nCross"));
if(PS3.getButtonClick(SQUARE))
if (PS3.getButtonClick(SQUARE))
Serial.print(F("\r\nSquare"));
if(PS3.getButtonClick(UP)) {
if (PS3.getButtonClick(UP)) {
Serial.print(F("\r\nUp"));
if(PS3.PS3Connected) {
PS3.setAllOff();
if (PS3.PS3Connected) {
PS3.setLedOff();
PS3.setLedOn(LED4);
}
}
if(PS3.getButtonClick(RIGHT)) {
if (PS3.getButtonClick(RIGHT)) {
Serial.print(F("\r\nRight"));
if(PS3.PS3Connected) {
PS3.setAllOff();
if (PS3.PS3Connected) {
PS3.setLedOff();
PS3.setLedOn(LED1);
}
}
if(PS3.getButtonClick(DOWN)) {
if (PS3.getButtonClick(DOWN)) {
Serial.print(F("\r\nDown"));
if(PS3.PS3Connected) {
PS3.setAllOff();
if (PS3.PS3Connected) {
PS3.setLedOff();
PS3.setLedOn(LED2);
}
}
if(PS3.getButtonClick(LEFT)) {
if (PS3.getButtonClick(LEFT)) {
Serial.print(F("\r\nLeft"));
if(PS3.PS3Connected) {
PS3.setAllOff();
if (PS3.PS3Connected) {
PS3.setLedOff();
PS3.setLedOn(LED3);
}
}
if(PS3.getButtonClick(L1))
if (PS3.getButtonClick(L1))
Serial.print(F("\r\nL1"));
if(PS3.getButtonClick(L3))
if (PS3.getButtonClick(L3))
Serial.print(F("\r\nL3"));
if(PS3.getButtonClick(R1))
if (PS3.getButtonClick(R1))
Serial.print(F("\r\nR1"));
if(PS3.getButtonClick(R3))
if (PS3.getButtonClick(R3))
Serial.print(F("\r\nR3"));
if(PS3.getButtonClick(SELECT)) {
if (PS3.getButtonClick(SELECT)) {
Serial.print(F("\r\nSelect - "));
Serial.print(PS3.getStatusString());
}
if(PS3.getButtonClick(START)) {
if (PS3.getButtonClick(START)) {
Serial.print(F("\r\nStart"));
printAngle = !printAngle;
}
}
if(printAngle) {
if (printAngle) {
Serial.print(F("\r\nPitch: "));
Serial.print(PS3.getAngle(Pitch));
Serial.print(F("\tRoll: "));
Serial.print(PS3.getAngle(Roll));
}
}
else if(PS3.PS3MoveConnected) {
if(PS3.getAnalogButton(T)) {
else if (PS3.PS3MoveConnected) {
if (PS3.getAnalogButton(T)) {
Serial.print(F("\r\nT: "));
Serial.print(PS3.getAnalogButton(T));
}
if(PS3.getButtonClick(PS)) {
if (PS3.getButtonClick(PS)) {
Serial.print(F("\r\nPS"));
PS3.disconnect();
}
else {
if(PS3.getButtonClick(SELECT)) {
if (PS3.getButtonClick(SELECT)) {
Serial.print(F("\r\nSelect"));
printTemperature = !printTemperature;
}
if(PS3.getButtonClick(START)) {
if (PS3.getButtonClick(START)) {
Serial.print(F("\r\nStart"));
printAngle = !printAngle;
}
if(PS3.getButtonClick(TRIANGLE)) {
if (PS3.getButtonClick(TRIANGLE)) {
Serial.print(F("\r\nTriangle"));
PS3.moveSetBulb(Red);
}
if(PS3.getButtonClick(CIRCLE)) {
if (PS3.getButtonClick(CIRCLE)) {
Serial.print(F("\r\nCircle"));
PS3.moveSetBulb(Green);
}
if(PS3.getButtonClick(SQUARE)) {
if (PS3.getButtonClick(SQUARE)) {
Serial.print(F("\r\nSquare"));
PS3.moveSetBulb(Blue);
}
if(PS3.getButtonClick(CROSS)) {
if (PS3.getButtonClick(CROSS)) {
Serial.print(F("\r\nCross"));
PS3.moveSetBulb(Yellow);
}
if(PS3.getButtonClick(MOVE)) {
if (PS3.getButtonClick(MOVE)) {
PS3.moveSetBulb(Off);
Serial.print(F("\r\nMove"));
Serial.print(F(" - "));
Serial.print(PS3.getStatusString());
}
}
if(printAngle) {
if (printAngle) {
Serial.print(F("\r\nPitch: "));
Serial.print(PS3.getAngle(Pitch));
Serial.print(F("\tRoll: "));
Serial.print(PS3.getAngle(Roll));
}
else if(printTemperature) {
else if (printTemperature) {
Serial.print(F("\r\nTemperature: "));
Serial.print(PS3.getTemperature());
}

71
examples/Bluetooth/PS3Multi/PS3Multi.ino
View file

@ -9,15 +9,16 @@
#include <usbhub.h>
USB Usb;
USBHub Hub1(&Usb); // Some dongles have a hub inside
//USBHub Hub1(&Usb); // Some dongles have a hub inside
BTD Btd(&Usb); // You have to create the Bluetooth Dongle instance like so
PS3BT *PS3[2]; // We will use this pointer to store the two instance, you can easily make it larger if you like, but it will use a lot of RAM!
const uint8_t length = sizeof(PS3)/sizeof(PS3[0]); // Get the lenght of the array
const uint8_t length = sizeof(PS3) / sizeof(PS3[0]); // Get the lenght of the array
boolean printAngle[length];
boolean oldControllerState[length];
void setup() {
for (uint8_t i=0;i<length;i++) {
for (uint8_t i = 0; i < length; i++) {
PS3[i] = new PS3BT(&Btd); // Create the instances
PS3[i]->attachOnInit(onInit); // onInit() is called upon a new connection - you can call the function whatever you like
}
@ -26,21 +27,21 @@ void setup() {
while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
if (Usb.Init() == -1) {
Serial.print(F("\r\nOSC did not start"));
while(1); //halt
while (1); //halt
}
Serial.print(F("\r\nPS3 Bluetooth Library Started"));
}
void loop() {
Usb.Task();
for(uint8_t i=0;i<length;i++) {
if(PS3[i]->PS3Connected || PS3[i]->PS3NavigationConnected) {
if(PS3[i]->getAnalogHat(LeftHatX) > 137 || PS3[i]->getAnalogHat(LeftHatX) < 117 || PS3[i]->getAnalogHat(LeftHatY) > 137 || PS3[i]->getAnalogHat(LeftHatY) < 117 || PS3[i]->getAnalogHat(RightHatX) > 137 || PS3[i]->getAnalogHat(RightHatX) < 117 || PS3[i]->getAnalogHat(RightHatY) > 137 || PS3[i]->getAnalogHat(RightHatY) < 117) {
for (uint8_t i = 0; i < length; i++) {
if (PS3[i]->PS3Connected || PS3[i]->PS3NavigationConnected) {
if (PS3[i]->getAnalogHat(LeftHatX) > 137 || PS3[i]->getAnalogHat(LeftHatX) < 117 || PS3[i]->getAnalogHat(LeftHatY) > 137 || PS3[i]->getAnalogHat(LeftHatY) < 117 || PS3[i]->getAnalogHat(RightHatX) > 137 || PS3[i]->getAnalogHat(RightHatX) < 117 || PS3[i]->getAnalogHat(RightHatY) > 137 || PS3[i]->getAnalogHat(RightHatY) < 117) {
Serial.print(F("\r\nLeftHatX: "));
Serial.print(PS3[i]->getAnalogHat(LeftHatX));
Serial.print(F("\tLeftHatY: "));
Serial.print(PS3[i]->getAnalogHat(LeftHatY));
if(!PS3[i]->PS3NavigationConnected) { // The Navigation controller only have one joystick
if (PS3[i]->PS3Connected) { // The Navigation controller only have one joystick
Serial.print(F("\tRightHatX: "));
Serial.print(PS3[i]->getAnalogHat(RightHatX));
Serial.print(F("\tRightHatY: "));
@ -48,77 +49,77 @@ void loop() {
}
}
//Analog button values can be read from almost all buttons
if(PS3[i]->getAnalogButton(L2) || PS3[i]->getAnalogButton(R2)) {
if (PS3[i]->getAnalogButton(L2) || PS3[i]->getAnalogButton(R2)) {
Serial.print(F("\r\nL2: "));
Serial.print(PS3[i]->getAnalogButton(L2));
if(!PS3[i]->PS3NavigationConnected) {
if (!PS3[i]->PS3NavigationConnected) {
Serial.print(F("\tR2: "));
Serial.print(PS3[i]->getAnalogButton(R2));
}
}
if(PS3[i]->getButtonClick(PS)) {
if (PS3[i]->getButtonClick(PS)) {
Serial.print(F("\r\nPS"));
PS3[i]->disconnect();
oldControllerState[i] = false; // Reset value
}
else {
if(PS3[i]->getButtonClick(TRIANGLE))
if (PS3[i]->getButtonClick(TRIANGLE))
Serial.print(F("\r\nTraingle"));
if(PS3[i]->getButtonClick(CIRCLE))
if (PS3[i]->getButtonClick(CIRCLE))
Serial.print(F("\r\nCircle"));
if(PS3[i]->getButtonClick(CROSS))
if (PS3[i]->getButtonClick(CROSS))
Serial.print(F("\r\nCross"));
if(PS3[i]->getButtonClick(SQUARE))
if (PS3[i]->getButtonClick(SQUARE))
Serial.print(F("\r\nSquare"));
if(PS3[i]->getButtonClick(UP)) {
if (PS3[i]->getButtonClick(UP)) {
Serial.print(F("\r\nUp"));
if(PS3[i]->PS3Connected) {
PS3[i]->setAllOff();
if (PS3[i]->PS3Connected) {
PS3[i]->setLedOff();
PS3[i]->setLedOn(LED4);
}
}
if(PS3[i]->getButtonClick(RIGHT)) {
if (PS3[i]->getButtonClick(RIGHT)) {
Serial.print(F("\r\nRight"));
if(PS3[i]->PS3Connected) {
PS3[i]->setAllOff();
if (PS3[i]->PS3Connected) {
PS3[i]->setLedOff();
PS3[i]->setLedOn(LED1);
}
}
if(PS3[i]->getButtonClick(DOWN)) {
if (PS3[i]->getButtonClick(DOWN)) {
Serial.print(F("\r\nDown"));
if(PS3[i]->PS3Connected) {
PS3[i]->setAllOff();
if (PS3[i]->PS3Connected) {
PS3[i]->setLedOff();
PS3[i]->setLedOn(LED2);
}
}
if(PS3[i]->getButtonClick(LEFT)) {
if (PS3[i]->getButtonClick(LEFT)) {
Serial.print(F("\r\nLeft"));
if(PS3[i]->PS3Connected) {
PS3[i]->setAllOff();
if (PS3[i]->PS3Connected) {
PS3[i]->setLedOff();
PS3[i]->setLedOn(LED3);
}
}
if(PS3[i]->getButtonClick(L1))
if (PS3[i]->getButtonClick(L1))
Serial.print(F("\r\nL1"));
if(PS3[i]->getButtonClick(L3))
if (PS3[i]->getButtonClick(L3))
Serial.print(F("\r\nL3"));
if(PS3[i]->getButtonClick(R1))
if (PS3[i]->getButtonClick(R1))
Serial.print(F("\r\nR1"));
if(PS3[i]->getButtonClick(R3))
if (PS3[i]->getButtonClick(R3))
Serial.print(F("\r\nR3"));
if(PS3[i]->getButtonClick(SELECT)) {
if (PS3[i]->getButtonClick(SELECT)) {
Serial.print(F("\r\nSelect - "));
Serial.print(PS3[i]->getStatusString());
}
if(PS3[i]->getButtonClick(START)) {
if (PS3[i]->getButtonClick(START)) {
Serial.print(F("\r\nStart"));
printAngle[i] = !printAngle[i];
}
}
if(printAngle[i]) {
if (printAngle[i]) {
Serial.print(F("\r\nPitch: "));
Serial.print(PS3[i]->getAngle(Pitch));
Serial.print(F("\tRoll: "));
@ -131,7 +132,7 @@ void loop() {
}
void onInit() {
for (uint8_t i=0;i<length;i++) {
for (uint8_t i = 0; i < length; i++) {
if ((PS3[i]->PS3Connected || PS3[i]->PS3NavigationConnected) && !oldControllerState[i]) {
oldControllerState[i] = true; // Used to check which is the new controller
PS3[i]->setLedOn((LED)i); // Cast directly to LED enum - see: "controllerEnums.h"

79
examples/Bluetooth/PS3SPP/PS3SPP.ino
View file

@ -14,7 +14,8 @@
#include <usbhub.h>
USB Usb;
USBHub Hub1(&Usb); // Some dongles have a hub inside
//USBHub Hub1(&Usb); // Some dongles have a hub inside
BTD Btd(&Usb); // You have to create the Bluetooth Dongle instance like so
/* You can create the instances of the bluetooth services in two ways */
@ -31,7 +32,7 @@ void setup() {
while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
if (Usb.Init() == -1) {
Serial.print(F("\r\nOSC did not start"));
while(1); //halt
while (1); //halt
}
Serial.print(F("\r\nBluetooth Library Started"));
output.reserve(200); // Reserve 200 bytes for the output string
@ -39,27 +40,27 @@ void setup() {
void loop() {
Usb.Task(); // The SPP data is actually not send until this is called, one could call SerialBT.send() directly as well
if(SerialBT.connected) {
if(firstMessage) {
if (SerialBT.connected) {
if (firstMessage) {
firstMessage = false;
SerialBT.println(F("Hello from Arduino")); // Send welcome message
}
if(Serial.available())
if (Serial.available())
SerialBT.write(Serial.read());
if(SerialBT.available())
if (SerialBT.available())
Serial.write(SerialBT.read());
}
else
firstMessage = true;
if(PS3.PS3Connected || PS3.PS3NavigationConnected) {
if (PS3.PS3Connected || PS3.PS3NavigationConnected) {
output = ""; // Reset output string
if(PS3.getAnalogHat(LeftHatX) > 137 || PS3.getAnalogHat(LeftHatX) < 117 || PS3.getAnalogHat(LeftHatY) > 137 || PS3.getAnalogHat(LeftHatY) < 117 || PS3.getAnalogHat(RightHatX) > 137 || PS3.getAnalogHat(RightHatX) < 117 || PS3.getAnalogHat(RightHatY) > 137 || PS3.getAnalogHat(RightHatY) < 117) {
if (PS3.getAnalogHat(LeftHatX) > 137 || PS3.getAnalogHat(LeftHatX) < 117 || PS3.getAnalogHat(LeftHatY) > 137 || PS3.getAnalogHat(LeftHatY) < 117 || PS3.getAnalogHat(RightHatX) > 137 || PS3.getAnalogHat(RightHatX) < 117 || PS3.getAnalogHat(RightHatY) > 137 || PS3.getAnalogHat(RightHatY) < 117) {
output += "LeftHatX: ";
output += PS3.getAnalogHat(LeftHatX);
output += "\tLeftHatY: ";
output += PS3.getAnalogHat(LeftHatY);
if(!PS3.PS3NavigationConnected) {
if (PS3.PS3Connected) { // The Navigation controller only have one joystick
output += "\tRightHatX: ";
output += PS3.getAnalogHat(RightHatX);
output += "\tRightHatY: ";
@ -67,85 +68,85 @@ void loop() {
}
}
//Analog button values can be read from almost all buttons
if(PS3.getAnalogButton(L2) || PS3.getAnalogButton(R2)) {
if(output != "")
if (PS3.getAnalogButton(L2) || PS3.getAnalogButton(R2)) {
if (output != "")
output += "\r\n";
output += "L2: ";
output += PS3.getAnalogButton(L2);
if(!PS3.PS3NavigationConnected) {
if (!PS3.PS3NavigationConnected) {
output += "\tR2: ";
output += PS3.getAnalogButton(R2);
}
}
if(output != "") {
if (output != "") {
Serial.println(output);
if(SerialBT.connected)
if (SerialBT.connected)
SerialBT.println(output);
output = ""; // Reset output string
}
if(PS3.getButtonClick(PS)) {
if (PS3.getButtonClick(PS)) {
output += " - PS";
PS3.disconnect();
}
else {
if(PS3.getButtonClick(TRIANGLE))
if (PS3.getButtonClick(TRIANGLE))
output += " - Traingle";
if(PS3.getButtonClick(CIRCLE))
if (PS3.getButtonClick(CIRCLE))
output += " - Circle";
if(PS3.getButtonClick(CROSS))
if (PS3.getButtonClick(CROSS))
output += " - Cross";
if(PS3.getButtonClick(SQUARE))
if (PS3.getButtonClick(SQUARE))
output += " - Square";
if(PS3.getButtonClick(UP)) {
if (PS3.getButtonClick(UP)) {
output += " - Up";
if(PS3.PS3Connected) {
PS3.setAllOff();
if (PS3.PS3Connected) {
PS3.setLedOff();
PS3.setLedOn(LED4);
}
}
if(PS3.getButtonClick(RIGHT)) {
if (PS3.getButtonClick(RIGHT)) {
output += " - Right";
if(PS3.PS3Connected) {
PS3.setAllOff();
if (PS3.PS3Connected) {
PS3.setLedOff();
PS3.setLedOn(LED1);
}
}
if(PS3.getButtonClick(DOWN)) {
if (PS3.getButtonClick(DOWN)) {
output += " - Down";
if(PS3.PS3Connected) {
PS3.setAllOff();
if (PS3.PS3Connected) {
PS3.setLedOff();
PS3.setLedOn(LED2);
}
}
if(PS3.getButtonClick(LEFT)) {
if (PS3.getButtonClick(LEFT)) {
output += " - Left";
if(PS3.PS3Connected) {
PS3.setAllOff();
if (PS3.PS3Connected) {
PS3.setLedOff();
PS3.setLedOn(LED3);
}
}
if(PS3.getButtonClick(L1))
if (PS3.getButtonClick(L1))
output += " - L1";
if(PS3.getButtonClick(L3))
if (PS3.getButtonClick(L3))
output += " - L3";
if(PS3.getButtonClick(R1))
if (PS3.getButtonClick(R1))
output += " - R1";
if(PS3.getButtonClick(R3))
if (PS3.getButtonClick(R3))
output += " - R3";
if(PS3.getButtonClick(SELECT)) {
if (PS3.getButtonClick(SELECT)) {
output += " - Select - ";
output += PS3.getStatusString();
}
if(PS3.getButtonClick(START))
if (PS3.getButtonClick(START))
output += " - Start";
if(output != "") {
if (output != "") {
String string = "PS3 Controller" + output;
Serial.println(string);
if(SerialBT.connected)
if (SerialBT.connected)
SerialBT.println(string);
}
}

13
examples/Bluetooth/SPP/SPP.ino
View file

@ -8,7 +8,8 @@
#include <usbhub.h>
USB Usb;
USBHub Hub1(&Usb); // Some dongles have a hub inside
//USBHub Hub1(&Usb); // Some dongles have a hub inside
BTD Btd(&Usb); // You have to create the Bluetooth Dongle instance like so
/* You can create the instance of the class in two ways */
SPP SerialBT(&Btd); // This will set the name to the defaults: "Arduino" and the pin to "1234"
@ -21,21 +22,21 @@ void setup() {
while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
if (Usb.Init() == -1) {
Serial.print(F("\r\nOSC did not start"));
while(1); //halt
while (1); //halt
}
Serial.print(F("\r\nSPP Bluetooth Library Started"));
}
void loop() {
Usb.Task(); // The SPP data is actually not send until this is called, one could call SerialBT.send() directly as well
if(SerialBT.connected) {
if(firstMessage) {
if (SerialBT.connected) {
if (firstMessage) {
firstMessage = false;
SerialBT.println(F("Hello from Arduino")); // Send welcome message
}
if(Serial.available())
if (Serial.available())
SerialBT.write(Serial.read());
if(SerialBT.available())
if (SerialBT.available())
Serial.write(SerialBT.read());
}
else

35
examples/Bluetooth/SPPMulti/SPPMulti.ino
View file

@ -8,55 +8,56 @@
#include <usbhub.h>
USB Usb;
USBHub Hub1(&Usb); // Some dongles have a hub inside
//USBHub Hub1(&Usb); // Some dongles have a hub inside
BTD Btd(&Usb); // You have to create the Bluetooth Dongle instance like so
SPP* SerialBT[2]; // We will use this pointer to store the two instance, you can easily make it larger if you like, but it will use a lot of RAM!
const uint8_t length = sizeof(SerialBT)/sizeof(SerialBT[0]); // Get the lenght of the array
SPP *SerialBT[2]; // We will use this pointer to store the two instance, you can easily make it larger if you like, but it will use a lot of RAM!
const uint8_t length = sizeof(SerialBT) / sizeof(SerialBT[0]); // Get the lenght of the array
boolean firstMessage[length] = { true }; // Set all to true
uint8_t buffer[50];
void setup() {
for(uint8_t i=0;i<length;i++)
for (uint8_t i = 0; i < length; i++)
SerialBT[i] = new SPP(&Btd); // This will set the name to the default: "Arduino" and the pin to "1234" for all connections
Serial.begin(115200);
while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
if (Usb.Init() == -1) {
Serial.print(F("\r\nOSC did not start"));
while(1); //halt
while (1); //halt
}
Serial.print(F("\r\nSPP Bluetooth Library Started"));
}
void loop() {
Usb.Task(); // The SPP data is actually not send until this is called, one could call SerialBT.send() directly as well
for(uint8_t i=0;i<length;i++) {
if(SerialBT[i]->connected) {
if(firstMessage[i]) {
for (uint8_t i = 0; i < length; i++) {
if (SerialBT[i]->connected) {
if (firstMessage[i]) {
firstMessage[i] = false;
SerialBT[i]->println(F("Hello from Arduino")); // Send welcome message
}
if(SerialBT[i]->available())
if (SerialBT[i]->available())
Serial.write(SerialBT[i]->read());
}
else
firstMessage[i] = true;
}
if(Serial.available()) {
if (Serial.available()) {
delay(10); // Wait for the rest of the data to arrive
uint8_t i = 0;
while(Serial.available() && i < sizeof(buffer)) // Read the data
while (Serial.available() && i < sizeof(buffer)) // Read the data
buffer[i++] = Serial.read();
/*
Set the connection you want to send to using the first character
For instace "0Hello World" would send "Hello World" to connection 0
*/
uint8_t id = buffer[0]-'0'; // Convert from ASCII
if(id < length && i > 1) { // And then compare to length and make sure there is any text
if(SerialBT[id]->connected) { // Check if a device is actually connected
for(uint8_t i2 = 0; i2 < i-1; i2++) // Don't include the first character
buffer[i2] = buffer[i2+1];
SerialBT[id]->write(buffer,i-1); // Send the data
uint8_t id = buffer[0] - '0'; // Convert from ASCII
if (id < length && i > 1) { // And then compare to length and make sure there is any text
if (SerialBT[id]->connected) { // Check if a device is actually connected
for (uint8_t i2 = 0; i2 < i - 1; i2++) // Don't include the first character
buffer[i2] = buffer[i2 + 1];
SerialBT[id]->write(buffer, i - 1); // Send the data
}
}
}

53
examples/Bluetooth/Wii/Wii.ino
View file

@ -8,10 +8,11 @@
#include <usbhub.h>
USB Usb;
USBHub Hub1(&Usb); // Some dongles have a hub inside
//USBHub Hub1(&Usb); // Some dongles have a hub inside
BTD Btd(&Usb); // You have to create the Bluetooth Dongle instance like so
/* You can create the instance of the class in two ways */
WII Wii(&Btd,PAIR); // This will start an inquiry and then pair with your Wiimote - you only have to do this once
WII Wii(&Btd, PAIR); // This will start an inquiry and then pair with your Wiimote - you only have to do this once
//WII Wii(&Btd); // After that you can simply create the instance like so and then press any button on the Wiimote
bool printAngle;
@ -21,68 +22,68 @@ void setup() {
while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
if (Usb.Init() == -1) {
Serial.print(F("\r\nOSC did not start"));
while(1); //halt
while (1); //halt
}
Serial.print(F("\r\nWiimote Bluetooth Library Started"));
}
void loop() {
Usb.Task();
if(Wii.wiimoteConnected) {
if(Wii.getButtonClick(HOME)) { // You can use getButtonPress to see if the button is held down
if (Wii.wiimoteConnected) {
if (Wii.getButtonClick(HOME)) { // You can use getButtonPress to see if the button is held down
Serial.print(F("\r\nHOME"));
Wii.disconnect();
}
else {
if(Wii.getButtonClick(LEFT)) {
Wii.setAllOff();
if (Wii.getButtonClick(LEFT)) {
Wii.setLedOff();
Wii.setLedOn(LED1);
Serial.print(F("\r\nLeft"));
}
if(Wii.getButtonClick(RIGHT)) {
Wii.setAllOff();
if (Wii.getButtonClick(RIGHT)) {
Wii.setLedOff();
Wii.setLedOn(LED3);
Serial.print(F("\r\nRight"));
}
if(Wii.getButtonClick(DOWN)) {
Wii.setAllOff();
if (Wii.getButtonClick(DOWN)) {
Wii.setLedOff();
Wii.setLedOn(LED4);
Serial.print(F("\r\nDown"));
}
if(Wii.getButtonClick(UP)) {
Wii.setAllOff();
if (Wii.getButtonClick(UP)) {
Wii.setLedOff();
Wii.setLedOn(LED2);
Serial.print(F("\r\nUp"));
}
if(Wii.getButtonClick(PLUS))
if (Wii.getButtonClick(PLUS))
Serial.print(F("\r\nPlus"));
if(Wii.getButtonClick(MINUS))
if (Wii.getButtonClick(MINUS))
Serial.print(F("\r\nMinus"));
if(Wii.getButtonClick(ONE))
if (Wii.getButtonClick(ONE))
Serial.print(F("\r\nOne"));
if(Wii.getButtonClick(TWO))
if (Wii.getButtonClick(TWO))
Serial.print(F("\r\nTwo"));
if(Wii.getButtonClick(A)) {
if (Wii.getButtonClick(A)) {
printAngle = !printAngle;
Serial.print(F("\r\nA"));
}
if(Wii.getButtonClick(B)) {
if (Wii.getButtonClick(B)) {
Wii.setRumbleToggle();
Serial.print(F("\r\nB"));
}
}
if(printAngle) {
if (printAngle) {
Serial.print(F("\r\nPitch: "));
Serial.print(Wii.getPitch());
Serial.print(F("\tRoll: "));
Serial.print(Wii.getRoll());
if(Wii.motionPlusConnected) {
if (Wii.motionPlusConnected) {
Serial.print(F("\tYaw: "));
Serial.print(Wii.getYaw());
}
if(Wii.nunchuckConnected) {
if (Wii.nunchuckConnected) {
Serial.print(F("\tNunchuck Pitch: "));
Serial.print(Wii.getNunchuckPitch());
Serial.print(F("\tNunchuck Roll: "));
@ -90,12 +91,12 @@ void loop() {
}
}
}
if(Wii.nunchuckConnected) {
if(Wii.getButtonClick(Z))
if (Wii.nunchuckConnected) {
if (Wii.getButtonClick(Z))
Serial.print(F("\r\nZ"));
if(Wii.getButtonClick(C))
if (Wii.getButtonClick(C))
Serial.print(F("\r\nC"));
if(Wii.getAnalogHat(HatX) > 137 || Wii.getAnalogHat(HatX) < 117 || Wii.getAnalogHat(HatY) > 137 || Wii.getAnalogHat(HatY) < 117) {
if (Wii.getAnalogHat(HatX) > 137 || Wii.getAnalogHat(HatX) < 117 || Wii.getAnalogHat(HatY) > 137 || Wii.getAnalogHat(HatY) < 117) {
Serial.print(F("\r\nHatX: "));
Serial.print(Wii.getAnalogHat(HatX));
Serial.print(F("\tHatY: "));

45
examples/Bluetooth/WiiIRCamera/WiiIRCamera.ino
View file

@ -19,10 +19,11 @@ Otherwise, wire up a IR LED yourself.
#endif
USB Usb;
USBHub Hub1(&Usb); // Some dongles have a hub inside
//USBHub Hub1(&Usb); // Some dongles have a hub inside
BTD Btd(&Usb); // You have to create the Bluetooth Dongle instance like so
/* You can create the instance of the class in two ways */
WII Wii(&Btd,PAIR); // This will start an inquiry and then pair with your Wiimote - you only have to do this once
WII Wii(&Btd, PAIR); // This will start an inquiry and then pair with your Wiimote - you only have to do this once
//WII Wii(&Btd); // After the Wiimote pairs once with the line of code above, you can simply create the instance like so and re upload and then press any button on the Wiimote
bool printAngle;
@ -33,31 +34,31 @@ void setup() {
while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
if (Usb.Init() == -1) {
Serial.print(F("\r\nOSC did not start"));
while(1); //halt
while (1); //halt
}
Serial.print(F("\r\nWiimote Bluetooth Library Started"));
}
void loop() {
Usb.Task();
if(Wii.wiimoteConnected) {
if(Wii.getButtonClick(HOME)) { // You can use getButtonPress to see if the button is held down
if (Wii.wiimoteConnected) {
if (Wii.getButtonClick(HOME)) { // You can use getButtonPress to see if the button is held down
Serial.print(F("\r\nHOME"));
Wii.disconnect();
}
else {
if(Wii.getButtonClick(ONE))
if (Wii.getButtonClick(ONE))
Wii.IRinitialize(); // Run the initialisation sequence
if(Wii.getButtonClick(MINUS) || Wii.getButtonClick(PLUS)) {
if(!Wii.isIRCameraEnabled())
if (Wii.getButtonClick(MINUS) || Wii.getButtonClick(PLUS)) {
if (!Wii.isIRCameraEnabled())
Serial.print(F("\r\nEnable IR camera first"));
else {
if(Wii.getButtonPress(MINUS)) { // getButtonClick will only return true once
if(printObjects > 0)
if (Wii.getButtonPress(MINUS)) { // getButtonClick will only return true once
if (printObjects > 0)
printObjects--;
}
else {
if(printObjects < 4)
if (printObjects < 4)
printObjects++;
}
Serial.print(F("\r\nTracking "));
@ -65,17 +66,17 @@ void loop() {
Serial.print(F(" objects"));
}
}
if(Wii.getButtonClick(A)) {
if (Wii.getButtonClick(A)) {
printAngle = !printAngle;
Serial.print(F("\r\nA"));
}
if(Wii.getButtonClick(B)) {
if (Wii.getButtonClick(B)) {
Serial.print(F("\r\nBattery level: "));
Serial.print(Wii.getBatteryLevel()); // You can get the battery level as well
}
}
if(printObjects > 0) {
if(Wii.getIRx1() != 0x3FF || Wii.getIRy1() != 0x3FF || Wii.getIRs1() != 0) { // Only print if the IR camera is actually seeing something
if (printObjects > 0) {
if (Wii.getIRx1() != 0x3FF || Wii.getIRy1() != 0x3FF || Wii.getIRs1() != 0) { // Only print if the IR camera is actually seeing something
Serial.print(F("\r\nx1: "));
Serial.print(Wii.getIRx1());
Serial.print(F("\ty1: "));
@ -83,8 +84,8 @@ void loop() {
Serial.print(F("\ts1:"));
Serial.print(Wii.getIRs1());
}
if(printObjects > 1) {
if(Wii.getIRx2() != 0x3FF || Wii.getIRy2() != 0x3FF || Wii.getIRs2() != 0) {
if (printObjects > 1) {
if (Wii.getIRx2() != 0x3FF || Wii.getIRy2() != 0x3FF || Wii.getIRs2() != 0) {
Serial.print(F("\r\nx2: "));
Serial.print(Wii.getIRx2());
Serial.print(F("\ty2: "));
@ -92,8 +93,8 @@ void loop() {
Serial.print(F("\ts2:"));
Serial.print(Wii.getIRs2());
}
if(printObjects > 2) {
if(Wii.getIRx3() != 0x3FF || Wii.getIRy3() != 0x3FF || Wii.getIRs3() != 0) {
if (printObjects > 2) {
if (Wii.getIRx3() != 0x3FF || Wii.getIRy3() != 0x3FF || Wii.getIRs3() != 0) {
Serial.print(F("\r\nx3: "));
Serial.print(Wii.getIRx3());
Serial.print(F("\ty3: "));
@ -101,8 +102,8 @@ void loop() {
Serial.print(F("\ts3:"));
Serial.print(Wii.getIRs3());
}
if(printObjects > 3) {
if(Wii.getIRx4() != 0x3FF || Wii.getIRy4() != 0x3FF || Wii.getIRs4() != 0) {
if (printObjects > 3) {
if (Wii.getIRx4() != 0x3FF || Wii.getIRy4() != 0x3FF || Wii.getIRs4() != 0) {
Serial.print(F("\r\nx4: "));
Serial.print(Wii.getIRx4());
Serial.print(F("\ty4: "));
@ -114,7 +115,7 @@ void loop() {
}
}
}
if(printAngle) { // There is no extension bytes available, so the MotionPlus or Nunchuck can't be read
if (printAngle) { // There is no extension bytes available, so the MotionPlus or Nunchuck can't be read
Serial.print(F("\r\nPitch: "));
Serial.print(Wii.getPitch());
Serial.print(F("\tRoll: "));

59
examples/Bluetooth/WiiMulti/WiiMulti.ino
View file

@ -9,15 +9,16 @@
#include <usbhub.h>
USB Usb;
USBHub Hub1(&Usb); // Some dongles have a hub inside
//USBHub Hub1(&Usb); // Some dongles have a hub inside
BTD Btd(&Usb); // You have to create the Bluetooth Dongle instance like so
WII *Wii[2]; // We will use this pointer to store the two instance, you can easily make it larger if you like, but it will use a lot of RAM!
const uint8_t length = sizeof(Wii)/sizeof(Wii[0]); // Get the lenght of the array
const uint8_t length = sizeof(Wii) / sizeof(Wii[0]); // Get the lenght of the array
boolean printAngle[length];
boolean oldControllerState[length];
void setup() {
for (uint8_t i=0;i<length;i++) {
for (uint8_t i = 0; i < length; i++) {
Wii[i] = new WII(&Btd); // You will have to pair each controller with the dongle before you can define the instances like so, just add PAIR as the second argument
Wii[i]->attachOnInit(onInit); // onInit() is called upon a new connection - you can call the function whatever you like
}
@ -26,71 +27,71 @@ void setup() {
while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
if (Usb.Init() == -1) {
Serial.print(F("\r\nOSC did not start"));
while(1); //halt
while (1); //halt
}
Serial.print(F("\r\nWiimote Bluetooth Library Started"));
}
void loop() {
Usb.Task();
for(uint8_t i=0;i<length;i++) {
if(Wii[i]->wiimoteConnected) {
if(Wii[i]->getButtonClick(HOME)) { // You can use getButtonPress to see if the button is held down
for (uint8_t i = 0; i < length; i++) {
if (Wii[i]->wiimoteConnected) {
if (Wii[i]->getButtonClick(HOME)) { // You can use getButtonPress to see if the button is held down
Serial.print(F("\r\nHOME"));
Wii[i]->disconnect();
oldControllerState[i] = false; // Reset value
}
else {
if(Wii[i]->getButtonClick(LEFT)) {
Wii[i]->setAllOff();
if (Wii[i]->getButtonClick(LEFT)) {
Wii[i]->setLedOff();
Wii[i]->setLedOn(LED1);
Serial.print(F("\r\nLeft"));
}
if(Wii[i]->getButtonClick(RIGHT)) {
Wii[i]->setAllOff();
if (Wii[i]->getButtonClick(RIGHT)) {
Wii[i]->setLedOff();
Wii[i]->setLedOn(LED3);
Serial.print(F("\r\nRight"));
}
if(Wii[i]->getButtonClick(DOWN)) {
Wii[i]->setAllOff();
if (Wii[i]->getButtonClick(DOWN)) {
Wii[i]->setLedOff();
Wii[i]->setLedOn(LED4);
Serial.print(F("\r\nDown"));
}
if(Wii[i]->getButtonClick(UP)) {
Wii[i]->setAllOff();
if (Wii[i]->getButtonClick(UP)) {
Wii[i]->setLedOff();
Wii[i]->setLedOn(LED2);
Serial.print(F("\r\nUp"));
}
if(Wii[i]->getButtonClick(PLUS))
if (Wii[i]->getButtonClick(PLUS))
Serial.print(F("\r\nPlus"));
if(Wii[i]->getButtonClick(MINUS))
if (Wii[i]->getButtonClick(MINUS))
Serial.print(F("\r\nMinus"));
if(Wii[i]->getButtonClick(ONE))
if (Wii[i]->getButtonClick(ONE))
Serial.print(F("\r\nOne"));
if(Wii[i]->getButtonClick(TWO))
if (Wii[i]->getButtonClick(TWO))
Serial.print(F("\r\nTwo"));
if(Wii[i]->getButtonClick(A)) {
if (Wii[i]->getButtonClick(A)) {
printAngle[i] = !printAngle[i];
Serial.print(F("\r\nA"));
}
if(Wii[i]->getButtonClick(B)) {
if (Wii[i]->getButtonClick(B)) {
Wii[i]->setRumbleToggle();
Serial.print(F("\r\nB"));
}
}
if(printAngle[i]) {
if (printAngle[i]) {
Serial.print(F("\r\nPitch: "));
Serial.print(Wii[i]->getPitch());
Serial.print(F("\tRoll: "));
Serial.print(Wii[i]->getRoll());
if(Wii[i]->motionPlusConnected) {
if (Wii[i]->motionPlusConnected) {
Serial.print(F("\tYaw: "));
Serial.print(Wii[i]->getYaw());
}
if(Wii[i]->nunchuckConnected) {
if (Wii[i]->nunchuckConnected) {
Serial.print(F("\tNunchuck Pitch: "));
Serial.print(Wii[i]->getNunchuckPitch());
Serial.print(F("\tNunchuck Roll: "));
@ -98,12 +99,12 @@ void loop() {
}
}
}
if(Wii[i]->nunchuckConnected) {
if(Wii[i]->getButtonClick(Z))
if (Wii[i]->nunchuckConnected) {
if (Wii[i]->getButtonClick(Z))
Serial.print(F("\r\nZ"));
if(Wii[i]->getButtonClick(C))
if (Wii[i]->getButtonClick(C))
Serial.print(F("\r\nC"));
if(Wii[i]->getAnalogHat(HatX) > 137 || Wii[i]->getAnalogHat(HatX) < 117 || Wii[i]->getAnalogHat(HatY) > 137 || Wii[i]->getAnalogHat(HatY) < 117) {
if (Wii[i]->getAnalogHat(HatX) > 137 || Wii[i]->getAnalogHat(HatX) < 117 || Wii[i]->getAnalogHat(HatY) > 137 || Wii[i]->getAnalogHat(HatY) < 117) {
Serial.print(F("\r\nHatX: "));
Serial.print(Wii[i]->getAnalogHat(HatX));
Serial.print(F("\tHatY: "));
@ -114,7 +115,7 @@ void loop() {
}
void onInit() {
for (uint8_t i=0;i<length;i++) {
for (uint8_t i = 0; i < length; i++) {
if (Wii[i]->wiimoteConnected && !oldControllerState[i]) {
oldControllerState[i] = true; // Used to check which is the new controller
Wii[i]->setLedOn((LED)i); // Cast directly to LED enum - see: "controllerEnums.h"

53
examples/Bluetooth/WiiUProController/WiiUProController.ino
View file

@ -8,10 +8,11 @@
#include <usbhub.h>
USB Usb;
USBHub Hub1(&Usb); // Some dongles have a hub inside
//USBHub Hub1(&Usb); // Some dongles have a hub inside
BTD Btd(&Usb); // You have to create the Bluetooth Dongle instance like so
/* You can create the instance of the class in two ways */
WII Wii(&Btd,PAIR); // This will start an inquiry and then pair with your Wiimote - you only have to do this once
WII Wii(&Btd, PAIR); // This will start an inquiry and then pair with your Wiimote - you only have to do this once
//WII Wii(&Btd); // After that you can simply create the instance like so and then press any button on the Wiimote
void setup() {
@ -19,69 +20,69 @@ void setup() {
while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
if (Usb.Init() == -1) {
Serial.print(F("\r\nOSC did not start"));
while(1); //halt
while (1); //halt
}
Serial.print(F("\r\nWiimote Bluetooth Library Started"));
}
void loop() {
Usb.Task();
if(Wii.wiiUProControllerConnected) {
if(Wii.getButtonClick(HOME)) { // You can use getButtonPress to see if the button is held down
if (Wii.wiiUProControllerConnected) {
if (Wii.getButtonClick(HOME)) { // You can use getButtonPress to see if the button is held down
Serial.print(F("\r\nHome"));
Wii.disconnect();
}
else {
if(Wii.getButtonClick(LEFT)) {
Wii.setAllOff();
if (Wii.getButtonClick(LEFT)) {
Wii.setLedOff();
Wii.setLedOn(LED1);
Serial.print(F("\r\nLeft"));
}
if(Wii.getButtonClick(RIGHT)) {
Wii.setAllOff();
if (Wii.getButtonClick(RIGHT)) {
Wii.setLedOff();
Wii.setLedOn(LED3);
Serial.print(F("\r\nRight"));
}
if(Wii.getButtonClick(DOWN)) {
Wii.setAllOff();
if (Wii.getButtonClick(DOWN)) {
Wii.setLedOff();
Wii.setLedOn(LED4);
Serial.print(F("\r\nDown"));
}
if(Wii.getButtonClick(UP)) {
Wii.setAllOff();
if (Wii.getButtonClick(UP)) {
Wii.setLedOff();
Wii.setLedOn(LED2);
Serial.print(F("\r\nUp"));
}
if(Wii.getButtonClick(PLUS))
if (Wii.getButtonClick(PLUS))
Serial.print(F("\r\nPlus"));
if(Wii.getButtonClick(MINUS))
if (Wii.getButtonClick(MINUS))
Serial.print(F("\r\nMinus"));
if(Wii.getButtonClick(A))
if (Wii.getButtonClick(A))
Serial.print(F("\r\nA"));
if(Wii.getButtonClick(B)) {
if (Wii.getButtonClick(B)) {
Wii.setRumbleToggle();
Serial.print(F("\r\nB"));
}
if(Wii.getButtonClick(X))
if (Wii.getButtonClick(X))
Serial.print(F("\r\nX"));
if(Wii.getButtonClick(Y))
if (Wii.getButtonClick(Y))
Serial.print(F("\r\nY"));
if(Wii.getButtonClick(L))
if (Wii.getButtonClick(L))
Serial.print(F("\r\nL"));
if(Wii.getButtonClick(R))
if (Wii.getButtonClick(R))
Serial.print(F("\r\nR"));
if(Wii.getButtonClick(ZL))
if (Wii.getButtonClick(ZL))
Serial.print(F("\r\nZL"));
if(Wii.getButtonClick(ZR))
if (Wii.getButtonClick(ZR))
Serial.print(F("\r\nZR"));
if(Wii.getButtonClick(L3))
if (Wii.getButtonClick(L3))
Serial.print(F("\r\nL3"));
if(Wii.getButtonClick(R3))
if (Wii.getButtonClick(R3))
Serial.print(F("\r\nR3"));
}
if(Wii.getAnalogHat(LeftHatX) > 2200 || Wii.getAnalogHat(LeftHatX) < 1800 || Wii.getAnalogHat(LeftHatY) > 2200 || Wii.getAnalogHat(LeftHatY) < 1800 || Wii.getAnalogHat(RightHatX) > 2200 || Wii.getAnalogHat(RightHatX) < 1800 || Wii.getAnalogHat(RightHatY) > 2200 || Wii.getAnalogHat(RightHatY) < 1800) {
if (Wii.getAnalogHat(LeftHatX) > 2200 || Wii.getAnalogHat(LeftHatX) < 1800 || Wii.getAnalogHat(LeftHatY) > 2200 || Wii.getAnalogHat(LeftHatY) < 1800 || Wii.getAnalogHat(RightHatX) > 2200 || Wii.getAnalogHat(RightHatX) < 1800 || Wii.getAnalogHat(RightHatY) > 2200 || Wii.getAnalogHat(RightHatY) < 1800) {
Serial.print(F("\r\nLeftHatX: "));
Serial.print(Wii.getAnalogHat(LeftHatX));
Serial.print(F("\tLeftHatY: "));

108
examples/PS3USB/PS3USB.ino
View file

@ -19,20 +19,20 @@ void setup() {
while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
if (Usb.Init() == -1) {
Serial.print(F("\r\nOSC did not start"));
while(1); //halt
while (1); //halt
}
Serial.print(F("\r\nPS3 USB Library Started"));
}
void loop() {
Usb.Task();
if(PS3.PS3Connected || PS3.PS3NavigationConnected) {
if(PS3.getAnalogHat(LeftHatX) > 137 || PS3.getAnalogHat(LeftHatX) < 117 || PS3.getAnalogHat(LeftHatY) > 137 || PS3.getAnalogHat(LeftHatY) < 117 || PS3.getAnalogHat(RightHatX) > 137 || PS3.getAnalogHat(RightHatX) < 117 || PS3.getAnalogHat(RightHatY) > 137 || PS3.getAnalogHat(RightHatY) < 117) {
if (PS3.PS3Connected || PS3.PS3NavigationConnected) {
if (PS3.getAnalogHat(LeftHatX) > 137 || PS3.getAnalogHat(LeftHatX) < 117 || PS3.getAnalogHat(LeftHatY) > 137 || PS3.getAnalogHat(LeftHatY) < 117 || PS3.getAnalogHat(RightHatX) > 137 || PS3.getAnalogHat(RightHatX) < 117 || PS3.getAnalogHat(RightHatY) > 137 || PS3.getAnalogHat(RightHatY) < 117) {
Serial.print(F("\r\nLeftHatX: "));
Serial.print(PS3.getAnalogHat(LeftHatX));
Serial.print(F("\tLeftHatY: "));
Serial.print(PS3.getAnalogHat(LeftHatY));
if(!PS3.PS3NavigationConnected) {
if (PS3.PS3Connected) { // The Navigation controller only have one joystick
Serial.print(F("\tRightHatX: "));
Serial.print(PS3.getAnalogHat(RightHatX));
Serial.print(F("\tRightHatY: "));
@ -40,121 +40,101 @@ void loop() {
}
}
// Analog button values can be read from almost all buttons
if(PS3.getAnalogButton(L2) || PS3.getAnalogButton(R2)) {
if (PS3.getAnalogButton(L2) || PS3.getAnalogButton(R2)) {
Serial.print(F("\r\nL2: "));
Serial.print(PS3.getAnalogButton(L2));
if(!PS3.PS3NavigationConnected) {
if (!PS3.PS3NavigationConnected) {
Serial.print(F("\tR2: "));
Serial.print(PS3.getAnalogButton(R2));
}
}
if(PS3.getButtonClick(PS))
if (PS3.getButtonClick(PS))
Serial.print(F("\r\nPS"));
if(PS3.getButtonClick(TRIANGLE))
if (PS3.getButtonClick(TRIANGLE))
Serial.print(F("\r\nTraingle"));
if(PS3.getButtonClick(CIRCLE))
if (PS3.getButtonClick(CIRCLE))
Serial.print(F("\r\nCircle"));
if(PS3.getButtonClick(CROSS))
if (PS3.getButtonClick(CROSS))
Serial.print(F("\r\nCross"));
if(PS3.getButtonClick(SQUARE))
if (PS3.getButtonClick(SQUARE))
Serial.print(F("\r\nSquare"));
if(PS3.getButtonClick(UP)) {
if (PS3.getButtonClick(UP)) {
Serial.print(F("\r\nUp"));
PS3.setAllOff();
PS3.setLedOff();
PS3.setLedOn(LED4);
}
if(PS3.getButtonClick(RIGHT)) {
if (PS3.getButtonClick(RIGHT)) {
Serial.print(F("\r\nRight"));
PS3.setAllOff();
PS3.setLedOff();
PS3.setLedOn(LED1);
}
if(PS3.getButtonClick(DOWN)) {
if (PS3.getButtonClick(DOWN)) {
Serial.print(F("\r\nDown"));
PS3.setAllOff();
PS3.setLedOff();
PS3.setLedOn(LED2);
}
if(PS3.getButtonClick(LEFT)) {
if (PS3.getButtonClick(LEFT)) {
Serial.print(F("\r\nLeft"));
PS3.setAllOff();
PS3.setLedOff();
PS3.setLedOn(LED3);
}
if(PS3.getButtonClick(L1))
if (PS3.getButtonClick(L1))
Serial.print(F("\r\nL1"));
if(PS3.getButtonClick(L3))
if (PS3.getButtonClick(L3))
Serial.print(F("\r\nL3"));
if(PS3.getButtonClick(R1))
if (PS3.getButtonClick(R1))
Serial.print(F("\r\nR1"));
if(PS3.getButtonClick(R3))
if (PS3.getButtonClick(R3))
Serial.print(F("\r\nR3"));
if(PS3.getButtonClick(SELECT)) {
if (PS3.getButtonClick(SELECT)) {
Serial.print(F("\r\nSelect - "));
Serial.print(PS3.getStatusString());
}
if(PS3.getButtonClick(START)) {
if (PS3.getButtonClick(START)) {
Serial.print(F("\r\nStart"));
printAngle = !printAngle;
}
if (printAngle) {
Serial.print(F("\r\nPitch: "));
Serial.print(PS3.getAngle(Pitch));
Serial.print(F("\tRoll: "));
Serial.print(PS3.getAngle(Roll));
}
}
if(printAngle) {
Serial.print(F("\r\nPitch: "));
Serial.print(PS3.getAngle(Pitch));
Serial.print(F("\tRoll: "));
Serial.print(PS3.getAngle(Roll));
}
else if(PS3.PS3MoveConnected) { // One can only set the color of the bulb, set the rumble, set and get the bluetooth address and calibrate the magnetometer via USB
switch(state) {
case 0:
else if (PS3.PS3MoveConnected) { // One can only set the color of the bulb, set the rumble, set and get the bluetooth address and calibrate the magnetometer via USB
if (state == 0) {
PS3.moveSetRumble(0);
PS3.moveSetBulb(Off);
state = 1;
break;
case 1:
} else if (state == 1) {
PS3.moveSetRumble(75);
PS3.moveSetBulb(Red);
state = 2;
break;
case 2:
} else if (state == 2) {
PS3.moveSetRumble(125);
PS3.moveSetBulb(Green);
state = 3;
break;
case 3:
} else if (state == 3) {
PS3.moveSetRumble(150);
PS3.moveSetBulb(Blue);
state = 4;
break;
case 4:
} else if (state == 4) {
PS3.moveSetRumble(175);
PS3.moveSetBulb(Yellow);
state = 5;
break;
case 5:
} else if (state == 5) {
PS3.moveSetRumble(200);
PS3.moveSetBulb(Lightblue);
state = 6;
break;
case 6:
} else if (state == 6) {
PS3.moveSetRumble(225);
PS3.moveSetBulb(Purble);
state = 7;
break;
case 7:
} else if (state == 7) {
PS3.moveSetRumble(250);
PS3.moveSetBulb(White);
state = 0;
break;
}
state++;
if (state > 7)
state = 0;
delay(1000);
}
}

49
examples/Xbox/XBOXOLD/XBOXOLD.ino
View file

@ -16,83 +16,84 @@ void setup() {
while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
if (Usb.Init() == -1) {
Serial.print(F("\r\nOSC did not start"));
while(1); // halt
while (1); // halt
}
Serial.print(F("\r\nXBOX Library Started"));
}
void loop() {
Usb.Task();
if(Xbox.XboxConnected) {
if(Xbox.getButtonPress(BLACK) || Xbox.getButtonPress(WHITE)) {
if (Xbox.XboxConnected) {
if (Xbox.getButtonPress(BLACK) || Xbox.getButtonPress(WHITE)) {
Serial.print("BLACK: ");
Serial.print(Xbox.getButtonPress(BLACK));
Serial.print("\tWHITE: ");
Serial.println(Xbox.getButtonPress(WHITE));
Xbox.setRumbleOn(Xbox.getButtonPress(BLACK),Xbox.getButtonPress(WHITE));
Xbox.setRumbleOn(Xbox.getButtonPress(BLACK), Xbox.getButtonPress(WHITE));
} else
Xbox.setRumbleOn(0,0);
if(Xbox.getAnalogHat(LeftHatX) > 7500 || Xbox.getAnalogHat(LeftHatX) < -7500 || Xbox.getAnalogHat(LeftHatY) > 7500 || Xbox.getAnalogHat(LeftHatY) < -7500 || Xbox.getAnalogHat(RightHatX) > 7500 || Xbox.getAnalogHat(RightHatX) < -7500 || Xbox.getAnalogHat(RightHatY) > 7500 || Xbox.getAnalogHat(RightHatY) < -7500) {
if(Xbox.getAnalogHat(LeftHatX) > 7500 || Xbox.getAnalogHat(LeftHatX) < -7500) {
Xbox.setRumbleOn(0, 0);
if (Xbox.getAnalogHat(LeftHatX) > 7500 || Xbox.getAnalogHat(LeftHatX) < -7500 || Xbox.getAnalogHat(LeftHatY) > 7500 || Xbox.getAnalogHat(LeftHatY) < -7500 || Xbox.getAnalogHat(RightHatX) > 7500 || Xbox.getAnalogHat(RightHatX) < -7500 || Xbox.getAnalogHat(RightHatY) > 7500 || Xbox.getAnalogHat(RightHatY) < -7500) {
if (Xbox.getAnalogHat(LeftHatX) > 7500 || Xbox.getAnalogHat(LeftHatX) < -7500) {
Serial.print(F("LeftHatX: "));
Serial.print(Xbox.getAnalogHat(LeftHatX));
Serial.print("\t");
}
if(Xbox.getAnalogHat(LeftHatY) > 7500 || Xbox.getAnalogHat(LeftHatY) < -7500) {
if (Xbox.getAnalogHat(LeftHatY) > 7500 || Xbox.getAnalogHat(LeftHatY) < -7500) {
Serial.print(F("LeftHatY: "));
Serial.print(Xbox.getAnalogHat(LeftHatY));
Serial.print("\t");
}
if(Xbox.getAnalogHat(RightHatX) > 7500 || Xbox.getAnalogHat(RightHatX) < -7500) {
if (Xbox.getAnalogHat(RightHatX) > 7500 || Xbox.getAnalogHat(RightHatX) < -7500) {
Serial.print(F("RightHatX: "));
Serial.print(Xbox.getAnalogHat(RightHatX));
Serial.print("\t");
}
if(Xbox.getAnalogHat(RightHatY) > 7500 || Xbox.getAnalogHat(RightHatY) < -7500) {
if (Xbox.getAnalogHat(RightHatY) > 7500 || Xbox.getAnalogHat(RightHatY) < -7500) {
Serial.print(F("RightHatY: "));
Serial.print(Xbox.getAnalogHat(RightHatY));
}
Serial.println();
}
if(Xbox.getButtonClick(UP))
if (Xbox.getButtonClick(UP))
Serial.println(F("Up"));
if(Xbox.getButtonClick(DOWN))
if (Xbox.getButtonClick(DOWN))
Serial.println(F("Down"));
if(Xbox.getButtonClick(LEFT))
if (Xbox.getButtonClick(LEFT))
Serial.println(F("Left"));
if(Xbox.getButtonClick(RIGHT))
if (Xbox.getButtonClick(RIGHT))
Serial.println(F("Right"));
if(Xbox.getButtonClick(START))
if (Xbox.getButtonClick(START))
Serial.println(F("Start"));
if(Xbox.getButtonClick(BACK))
if (Xbox.getButtonClick(BACK))
Serial.println(F("Back"));
if(Xbox.getButtonClick(L3))
if (Xbox.getButtonClick(L3))
Serial.println(F("L3"));
if(Xbox.getButtonClick(R3))
if (Xbox.getButtonClick(R3))
Serial.println(F("R3"));
if(Xbox.getButtonPress(A)) {
if (Xbox.getButtonPress(A)) {
Serial.print(F("A: "));
Serial.println(Xbox.getButtonPress(A));
}
if(Xbox.getButtonPress(B)) {
if (Xbox.getButtonPress(B)) {
Serial.print(F("B: "));
Serial.println(Xbox.getButtonPress(B));
}
if(Xbox.getButtonPress(X)) {
if (Xbox.getButtonPress(X)) {
Serial.print(F("X: "));
Serial.println(Xbox.getButtonPress(X));
}
if(Xbox.getButtonPress(Y)) {
if (Xbox.getButtonPress(Y)) {
Serial.print(F("Y: "));
Serial.println(Xbox.getButtonPress(Y));
}
if(Xbox.getButtonPress(L1)) {
if (Xbox.getButtonPress(L1)) {
Serial.print(F("L1: "));
Serial.println(Xbox.getButtonPress(L1));
}
if(Xbox.getButtonPress(R1)) {
if (Xbox.getButtonPress(R1)) {
Serial.print(F("R1: "));
Serial.println(Xbox.getButtonPress(R1));
}

84
examples/Xbox/XBOXRECV/XBOXRECV.ino
View file

@ -15,98 +15,100 @@ void setup() {
while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
if (Usb.Init() == -1) {
Serial.print(F("\r\nOSC did not start"));
while(1); //halt
while (1); //halt
}
Serial.print(F("\r\nXbox Wireless Receiver Library Started"));
}
void loop() {
Usb.Task();
if(Xbox.XboxReceiverConnected) {
for(uint8_t i=0;i<4;i++) {
if(Xbox.Xbox360Connected[i]) {
if(Xbox.getButtonPress(L2,i) || Xbox.getButtonPress(R2,i)) {
if (Xbox.XboxReceiverConnected) {
for (uint8_t i = 0; i < 4; i++) {
if (Xbox.Xbox360Connected[i]) {
if (Xbox.getButtonPress(L2, i) || Xbox.getButtonPress(R2, i)) {
Serial.print("L2: ");
Serial.print(Xbox.getButtonPress(L2,i));
Serial.print(Xbox.getButtonPress(L2, i));
Serial.print("\tR2: ");
Serial.println(Xbox.getButtonPress(R2,i));
Xbox.setRumbleOn(Xbox.getButtonPress(L2,i),Xbox.getButtonPress(R2,i),i);
Serial.println(Xbox.getButtonPress(R2, i));
Xbox.setRumbleOn(Xbox.getButtonPress(L2, i), Xbox.getButtonPress(R2, i), i);
}
if(Xbox.getAnalogHat(LeftHatX,i) > 7500 || Xbox.getAnalogHat(LeftHatX,i) < -7500 || Xbox.getAnalogHat(LeftHatY,i) > 7500 || Xbox.getAnalogHat(LeftHatY,i) < -7500 || Xbox.getAnalogHat(RightHatX,i) > 7500 || Xbox.getAnalogHat(RightHatX,i) < -7500 || Xbox.getAnalogHat(RightHatY,i) > 7500 || Xbox.getAnalogHat(RightHatY,i) < -7500) {
if(Xbox.getAnalogHat(LeftHatX,i) > 7500 || Xbox.getAnalogHat(LeftHatX,i) < -7500) {
if (Xbox.getAnalogHat(LeftHatX, i) > 7500 || Xbox.getAnalogHat(LeftHatX, i) < -7500 || Xbox.getAnalogHat(LeftHatY, i) > 7500 || Xbox.getAnalogHat(LeftHatY, i) < -7500 || Xbox.getAnalogHat(RightHatX, i) > 7500 || Xbox.getAnalogHat(RightHatX, i) < -7500 || Xbox.getAnalogHat(RightHatY, i) > 7500 || Xbox.getAnalogHat(RightHatY, i) < -7500) {
if (Xbox.getAnalogHat(LeftHatX, i) > 7500 || Xbox.getAnalogHat(LeftHatX, i) < -7500) {
Serial.print(F("LeftHatX: "));
Serial.print(Xbox.getAnalogHat(LeftHatX,i));
Serial.print(Xbox.getAnalogHat(LeftHatX, i));
Serial.print("\t");
}
if(Xbox.getAnalogHat(LeftHatY,i) > 7500 || Xbox.getAnalogHat(LeftHatY,i) < -7500) {
if (Xbox.getAnalogHat(LeftHatY, i) > 7500 || Xbox.getAnalogHat(LeftHatY, i) < -7500) {
Serial.print(F("LeftHatY: "));
Serial.print(Xbox.getAnalogHat(LeftHatY,i));
Serial.print(Xbox.getAnalogHat(LeftHatY, i));
Serial.print("\t");
}
if(Xbox.getAnalogHat(RightHatX,i) > 7500 || Xbox.getAnalogHat(RightHatX,i) < -7500) {
if (Xbox.getAnalogHat(RightHatX, i) > 7500 || Xbox.getAnalogHat(RightHatX, i) < -7500) {
Serial.print(F("RightHatX: "));
Serial.print(Xbox.getAnalogHat(RightHatX,i));
Serial.print(Xbox.getAnalogHat(RightHatX, i));
Serial.print("\t");
}
if(Xbox.getAnalogHat(RightHatY,i) > 7500 || Xbox.getAnalogHat(RightHatY,i) < -7500) {
if (Xbox.getAnalogHat(RightHatY, i) > 7500 || Xbox.getAnalogHat(RightHatY, i) < -7500) {
Serial.print(F("RightHatY: "));
Serial.print(Xbox.getAnalogHat(RightHatY,i));
Serial.print(Xbox.getAnalogHat(RightHatY, i));
}
Serial.println();
}
if(Xbox.getButtonClick(UP,i)) {
Xbox.setLedOn(LED1,i);
if (Xbox.getButtonClick(UP, i)) {
Xbox.setLedOn(LED1, i);
Serial.println(F("Up"));
}
if(Xbox.getButtonClick(DOWN,i)) {
Xbox.setLedOn(LED4,i);
if (Xbox.getButtonClick(DOWN, i)) {
Xbox.setLedOn(LED4, i);
Serial.println(F("Down"));
}
if(Xbox.getButtonClick(LEFT,i)) {
Xbox.setLedOn(LED3,i);
if (Xbox.getButtonClick(LEFT, i)) {
Xbox.setLedOn(LED3, i);
Serial.println(F("Left"));
}
if(Xbox.getButtonClick(RIGHT,i)) {
Xbox.setLedOn(LED2,i);
if (Xbox.getButtonClick(RIGHT, i)) {
Xbox.setLedOn(LED2, i);
Serial.println(F("Right"));
}
if(Xbox.getButtonClick(START,i)) {
Xbox.setLedMode(ALTERNATING,i);
if (Xbox.getButtonClick(START, i)) {
Xbox.setLedMode(ALTERNATING, i);
Serial.println(F("Start"));
}
if(Xbox.getButtonClick(BACK,i)) {
Xbox.setLedBlink(ALL,i);
if (Xbox.getButtonClick(BACK, i)) {
Xbox.setLedBlink(ALL, i);
Serial.println(F("Back"));
}
if(Xbox.getButtonClick(L3,i))
if (Xbox.getButtonClick(L3, i))
Serial.println(F("L3"));
if(Xbox.getButtonClick(R3,i))
if (Xbox.getButtonClick(R3, i))
Serial.println(F("R3"));
if(Xbox.getButtonClick(L1,i))
if (Xbox.getButtonClick(L1, i))
Serial.println(F("L1"));
if(Xbox.getButtonClick(R1,i))
if (Xbox.getButtonClick(R1, i))
Serial.println(F("R1"));
if(Xbox.getButtonClick(XBOX,i)) {
Xbox.setLedMode(ROTATING,i);
if (Xbox.getButtonClick(XBOX, i)) {
Xbox.setLedMode(ROTATING, i);
Serial.print(F("Xbox (Battery: "));
Serial.print(Xbox.getBatteryLevel(i)); // The battery level in the range 0-3
Serial.println(F(")"));
}
if(Xbox.getButtonClick(SYNC,i))
if (Xbox.getButtonClick(SYNC, i)) {
Serial.println(F("Sync"));
Xbox.disconnect(i);
}
if(Xbox.getButtonClick(A,i))
if (Xbox.getButtonClick(A, i))
Serial.println(F("A"));
if(Xbox.getButtonClick(B,i))
if (Xbox.getButtonClick(B, i))
Serial.println(F("B"));
if(Xbox.getButtonClick(X,i))
if (Xbox.getButtonClick(X, i))
Serial.println(F("X"));
if(Xbox.getButtonClick(Y,i))
if (Xbox.getButtonClick(Y, i))
Serial.println(F("Y"));
}
}
}
delay(1);
}

51
examples/Xbox/XBOXUSB/XBOXUSB.ino
View file

@ -14,90 +14,91 @@ void setup() {
while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
if (Usb.Init() == -1) {
Serial.print(F("\r\nOSC did not start"));
while(1); //halt
while (1); //halt
}
Serial.print(F("\r\nXBOX USB Library Started"));
}
void loop() {
Usb.Task();
if(Xbox.Xbox360Connected) {
if(Xbox.getButtonPress(L2) || Xbox.getButtonPress(R2)) {
if (Xbox.Xbox360Connected) {
if (Xbox.getButtonPress(L2) || Xbox.getButtonPress(R2)) {
Serial.print("L2: ");
Serial.print(Xbox.getButtonPress(L2));
Serial.print("\tR2: ");
Serial.println(Xbox.getButtonPress(R2));
Xbox.setRumbleOn(Xbox.getButtonPress(L2),Xbox.getButtonPress(R2));
Xbox.setRumbleOn(Xbox.getButtonPress(L2), Xbox.getButtonPress(R2));
} else
Xbox.setRumbleOn(0,0);
if(Xbox.getAnalogHat(LeftHatX) > 7500 || Xbox.getAnalogHat(LeftHatX) < -7500 || Xbox.getAnalogHat(LeftHatY) > 7500 || Xbox.getAnalogHat(LeftHatY) < -7500 || Xbox.getAnalogHat(RightHatX) > 7500 || Xbox.getAnalogHat(RightHatX) < -7500 || Xbox.getAnalogHat(RightHatY) > 7500 || Xbox.getAnalogHat(RightHatY) < -7500) {
if(Xbox.getAnalogHat(LeftHatX) > 7500 || Xbox.getAnalogHat(LeftHatX) < -7500) {
Xbox.setRumbleOn(0, 0);
if (Xbox.getAnalogHat(LeftHatX) > 7500 || Xbox.getAnalogHat(LeftHatX) < -7500 || Xbox.getAnalogHat(LeftHatY) > 7500 || Xbox.getAnalogHat(LeftHatY) < -7500 || Xbox.getAnalogHat(RightHatX) > 7500 || Xbox.getAnalogHat(RightHatX) < -7500 || Xbox.getAnalogHat(RightHatY) > 7500 || Xbox.getAnalogHat(RightHatY) < -7500) {
if (Xbox.getAnalogHat(LeftHatX) > 7500 || Xbox.getAnalogHat(LeftHatX) < -7500) {
Serial.print(F("LeftHatX: "));
Serial.print(Xbox.getAnalogHat(LeftHatX));
Serial.print("\t");
}
if(Xbox.getAnalogHat(LeftHatY) > 7500 || Xbox.getAnalogHat(LeftHatY) < -7500) {
if (Xbox.getAnalogHat(LeftHatY) > 7500 || Xbox.getAnalogHat(LeftHatY) < -7500) {
Serial.print(F("LeftHatY: "));
Serial.print(Xbox.getAnalogHat(LeftHatY));
Serial.print("\t");
}
if(Xbox.getAnalogHat(RightHatX) > 7500 || Xbox.getAnalogHat(RightHatX) < -7500) {
if (Xbox.getAnalogHat(RightHatX) > 7500 || Xbox.getAnalogHat(RightHatX) < -7500) {
Serial.print(F("RightHatX: "));
Serial.print(Xbox.getAnalogHat(RightHatX));
Serial.print("\t");
}
if(Xbox.getAnalogHat(RightHatY) > 7500 || Xbox.getAnalogHat(RightHatY) < -7500) {
if (Xbox.getAnalogHat(RightHatY) > 7500 || Xbox.getAnalogHat(RightHatY) < -7500) {
Serial.print(F("RightHatY: "));
Serial.print(Xbox.getAnalogHat(RightHatY));
}
Serial.println();
}
if(Xbox.getButtonClick(UP)) {
if (Xbox.getButtonClick(UP)) {
Xbox.setLedOn(LED1);
Serial.println(F("Up"));
}
if(Xbox.getButtonClick(DOWN)) {
if (Xbox.getButtonClick(DOWN)) {
Xbox.setLedOn(LED4);
Serial.println(F("Down"));
}
if(Xbox.getButtonClick(LEFT)) {
if (Xbox.getButtonClick(LEFT)) {
Xbox.setLedOn(LED3);
Serial.println(F("Left"));
}
if(Xbox.getButtonClick(RIGHT)) {
if (Xbox.getButtonClick(RIGHT)) {
Xbox.setLedOn(LED2);
Serial.println(F("Right"));
}
if(Xbox.getButtonClick(START)) {
if (Xbox.getButtonClick(START)) {
Xbox.setLedMode(ALTERNATING);
Serial.println(F("Start"));
}
if(Xbox.getButtonClick(BACK)) {
if (Xbox.getButtonClick(BACK)) {
Xbox.setLedBlink(ALL);
Serial.println(F("Back"));
}
if(Xbox.getButtonClick(L3))
if (Xbox.getButtonClick(L3))
Serial.println(F("L3"));
if(Xbox.getButtonClick(R3))
if (Xbox.getButtonClick(R3))
Serial.println(F("R3"));
if(Xbox.getButtonClick(L1))
if (Xbox.getButtonClick(L1))
Serial.println(F("L1"));
if(Xbox.getButtonClick(R1))
if (Xbox.getButtonClick(R1))
Serial.println(F("R1"));
if(Xbox.getButtonClick(XBOX)) {
if (Xbox.getButtonClick(XBOX)) {
Xbox.setLedMode(ROTATING);
Serial.println(F("Xbox"));
}
if(Xbox.getButtonClick(A))
if (Xbox.getButtonClick(A))
Serial.println(F("A"));
if(Xbox.getButtonClick(B))
if (Xbox.getButtonClick(B))
Serial.println(F("B"));
if(Xbox.getButtonClick(X))
if (Xbox.getButtonClick(X))
Serial.println(F("X"));
if(Xbox.getButtonClick(Y))
if (Xbox.getButtonClick(Y))
Serial.println(F("Y"));
}
delay(1);

47
examples/adk/ArduinoBlinkLED/ArduinoBlinkLED.ino
View file

@ -3,40 +3,53 @@
#include <adk.h>
USB Usb;
ADK adk(&Usb,"TKJElectronics", // Manufacturer Name
"ArduinoBlinkLED", // Model Name
"Example sketch for the USB Host Shield", // Description (user-visible string)
"1.0", // Version
"http://www.tkjelectronics.dk/uploads/ArduinoBlinkLED.apk", // URL (web page to visit if no installed apps support the accessory)
"123456789"); // Serial Number (optional)
ADK adk(&Usb, "TKJElectronics", // Manufacturer Name
"ArduinoBlinkLED", // Model Name
"Example sketch for the USB Host Shield", // Description (user-visible string)
"1.0", // Version
"http://www.tkjelectronics.dk/uploads/ArduinoBlinkLED.apk", // URL (web page to visit if no installed apps support the accessory)
"123456789"); // Serial Number (optional)
#define LED 13 // Pin 13 is occupied by the SCK pin on a normal Arduino (Uno, Duemilanove etc.), so use a different pin
#define LED LED_BUILTIN // Use built in LED - note that pin 13 is occupied by the SCK pin on a normal Arduino (Uno, Duemilanove etc.), so use a different pin
void setup()
{
uint32_t timer;
void setup() {
Serial.begin(115200);
while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
if (Usb.Init() == -1) {
Serial.print("\r\nOSCOKIRQ failed to assert");
while(1); //halt
while (1); // halt
}
pinMode(LED, OUTPUT);
Serial.print("\r\nArduino Blink LED Started");
}
void loop()
{
void loop() {
Usb.Task();
if(adk.isReady()) {
if (adk.isReady()) {
uint8_t msg[1];
uint16_t len = sizeof(msg);
uint8_t rcode = adk.RcvData(&len, msg);
if(rcode && rcode != hrNAK)
USBTRACE2("Data rcv. :", rcode);
if(len > 0) {
if (rcode && rcode != hrNAK) {
Serial.print(F("\r\nData rcv: "));
Serial.print(rcode, HEX);
} else if (len > 0) {
Serial.print(F("\r\nData Packet: "));
Serial.print(msg[0]);
digitalWrite(LED,msg[0] ? HIGH : LOW);
digitalWrite(LED, msg[0] ? HIGH : LOW);
}
if (millis() - timer >= 1000) { // Send data every 1s
timer = millis();
rcode = adk.SndData(sizeof(timer), (uint8_t*)&timer);
if (rcode && rcode != hrNAK) {
Serial.print(F("\r\nData send: "));
Serial.print(rcode, HEX);
} else if (rcode != hrNAK) {
Serial.print(F("\r\nTimer: "));
Serial.print(timer);
}
}
}
else

2
examples/testusbhostFAT/Arduino_Makefile_master

@ -1 +1 @@
Subproject commit 7f1fe2f8ec3db4d1bd0a5c516dd379e2539d1303
Subproject commit 139b9c8be59a62e8fb1e8f983ac9bac2b9b9d582

12
examples/testusbhostFAT/Makefile
View file

@ -43,12 +43,12 @@ EXTRA_FLAGS += -D USB_HOST_SERIAL=Serial3
#EXTRA_FLAGS += -D DEBUG_USB_HOST
# The following are the libraries used.
LIB_DIRS =
LIB_DIRS += ../libraries/xmem
LIB_DIRS += ../libraries/USB_Host_Shield_2_0
LIB_DIRS += ../libraries/generic_storage
LIB_DIRS += ../libraries/RTClib
LIB_DIRS += ../../
LIB_DIRS += ../testusbhostFAT/xmem2
LIB_DIRS += ../testusbhostFAT/generic_storage
LIB_DIRS += ../testusbhostFAT/RTClib
LIB_DIRS += $(ARD_HOME)/libraries/Wire
LIB_DIRS += $(ARD_HOME)/libraries/Wire/utility
# And finally, the part that brings everything together for you.
include ../Arduino_Makefile_master/_Makefile.master
include Arduino_Makefile_master/_Makefile.master

2
examples/testusbhostFAT/RTClib

@ -1 +1 @@
Subproject commit cb8b5690c7d683e0c24e6894ff05552f83240714
Subproject commit a4bd6f500f70599847de60973371ee973d094a34

2
examples/testusbhostFAT/generic_storage

@ -1 +1 @@
Subproject commit db5de2fe3c2e0d2d96de98864b1b6e00e172f727
Subproject commit 1d481775b5096a172edf607062278a86e9618a15

176
examples/testusbhostFAT/testusbhostFAT.ino
View file

@ -47,8 +47,11 @@
/////////////////////////////////////////////////////////////
// End of Arduino IDE specific hacks //
/////////////////////////////////////////////////////////////
#if defined(AVR)
#include <xmem.h>
#else
#include <spi4teensy3.h>
#endif
#if WANT_HUB_TEST
#include <usbhub.h>
#endif
@ -59,22 +62,23 @@
#include <FAT/FAT.h>
#include <Wire.h>
#include <RTClib.h>
#include <stdio.h>
#if defined(AVR)
static FILE tty_stdio;
static FILE tty_stderr;
USB Usb;
#define LED 13 // the pin that the LED is attached to
volatile uint32_t LEDnext_time; // fade timeout
volatile uint32_t HEAPnext_time; // when to print out next heap report
volatile int brightness = 0; // how bright the LED is
volatile int fadeAmount = 80; // how many points to fade the LED by
#endif
USB Usb;
volatile uint8_t current_state = 1;
volatile uint32_t LEDnext_time; // fade timeout
volatile uint8_t last_state = 0;
volatile boolean fatready = false;
volatile boolean partsready = false;
volatile boolean notified = false;
volatile uint32_t HEAPnext_time; // when to print out next heap report
volatile boolean runtest = false;
volatile boolean usbon = false;
volatile uint32_t usbon_time;
@ -96,6 +100,7 @@ static storage_t sto[_VOLUMES];
#define mbxs 128
static uint8_t My_Buff_x[mbxs]; /* File read buffer */
#if defined(AVR)
#define prescale1 ((1 << WGM12) | (1 << CS10))
#define prescale8 ((1 << WGM12) | (1 << CS11))
@ -110,6 +115,11 @@ static int tty_stderr_putc(char c, FILE *t) {
return 0;
}
static int tty_stderr_flush(FILE *t) {
USB_HOST_SERIAL.flush();
return 0;
}
static int tty_std_putc(char c, FILE *t) {
Serial.write(c);
return 0;
@ -120,6 +130,49 @@ static int tty_std_getc(FILE *t) {
return Serial.read();
}
static int tty_std_flush(FILE *t) {
Serial.flush();
return 0;
}
#else
extern "C" {
int _write(int fd, const char *ptr, int len) {
int j;
for (j = 0; j < len; j++) {
if (fd == 1)
Serial.write(*ptr++);
else if (fd == 2)
USB_HOST_SERIAL.write(*ptr++);
}
return len;
}
int _read(int fd, char *ptr, int len) {
if (len > 0 && fd == 0) {
while (!Serial.available());
*ptr = Serial.read();
return 1;
}
return 0;
}
#include <sys/stat.h>
int _fstat(int fd, struct stat *st) {
memset(st, 0, sizeof (*st));
st->st_mode = S_IFCHR;
st->st_blksize = 1024;
return 0;
}
int _isatty(int fd) {
return (fd < 3) ? 1 : 0;
}
}
#endif
void setup() {
boolean serr = false;
for (int i = 0; i < _VOLUMES; i++) {
@ -130,8 +183,10 @@ void setup() {
// Set this to higher values to enable more debug information
// minimum 0x00, maximum 0xff
UsbDEBUGlvl = 0x51;
#if defined(AVR)
// make LED pin as an output:
pinMode(LED, OUTPUT);
pinMode(LED_BUILTIN, OUTPUT);
pinMode(2, OUTPUT);
// Ensure TX is off
_SFR_BYTE(UCSR0B) &= ~_BV(TXEN0);
@ -148,21 +203,26 @@ void setup() {
tty_stdio.get = tty_std_getc;
tty_stdio.flags = _FDEV_SETUP_RW;
tty_stdio.udata = 0;
stdout = &tty_stdio;
stdin = &tty_stdio;
tty_stderr.put = tty_stderr_putc;
tty_stderr.get = NULL;
tty_stderr.flags = _FDEV_SETUP_WRITE;
tty_stderr.udata = 0;
stdout = &tty_stdio;
stdin = &tty_stdio;
stderr = &tty_stderr;
// Blink LED
delay(500);
analogWrite(LED, 255);
analogWrite(LED_BUILTIN, 255);
delay(500);
analogWrite(LED, 0);
analogWrite(LED_BUILTIN, 0);
delay(500);
#else
while (!Serial);
#endif
printf_P(PSTR("\r\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nStart\r\n"));
printf_P(PSTR("Current UsbDEBUGlvl %02x\r\n"), UsbDEBUGlvl);
printf_P(PSTR("'+' and '-' increase/decrease by 0x01\r\n"));
@ -187,17 +247,19 @@ void setup() {
#endif
"\r\n"));
}
analogWrite(LED, 255);
#if defined(AVR)
analogWrite(LED_BUILTIN, 255);
delay(500);
analogWrite(LED, 0);
analogWrite(LED_BUILTIN, 0);
delay(500);
analogWrite(LED, 255);
analogWrite(LED_BUILTIN, 255);
delay(500);
analogWrite(LED, 0);
analogWrite(LED_BUILTIN, 0);
delay(500);
analogWrite(LED, 255);
analogWrite(LED_BUILTIN, 255);
delay(500);
analogWrite(LED, 0);
analogWrite(LED_BUILTIN, 0);
delay(500);
LEDnext_time = millis() + 1;
@ -206,6 +268,7 @@ void setup() {
#endif
printf_P(PSTR("Available heap: %u Bytes\r\n"), freeHeap());
printf_P(PSTR("SP %x\r\n"), (uint8_t *)(SP));
#endif
// Even though I'm not going to actually be deleting,
// I want to be able to have slightly more control.
@ -213,7 +276,9 @@ void setup() {
#if WANT_HUB_TEST
for (int i = 0; i < MAX_HUBS; i++) {
Hubs[i] = new USBHub(&Usb);
#if defined(AVR)
printf_P(PSTR("Available heap: %u Bytes\r\n"), freeHeap());
#endif
}
#endif
// Initialize generic storage. This must be done before USB starts.
@ -223,10 +288,8 @@ void setup() {
printf_P(PSTR("No USB HOST Shield?\r\n"));
Notify(PSTR("OSC did not start."), 0x40);
}
// usb VBUS _OFF_
//Usb.gpioWr(0x00);
//digitalWrite(2, 0);
//usbon_time = millis() + 2000;
#if defined(AVR)
cli();
TCCR3A = 0;
TCCR3B = 0;
@ -237,6 +300,32 @@ void setup() {
sei();
HEAPnext_time = millis() + 10000;
#else
#if 0
//
// On the teensy 3 we can raise the speed of SPI here.
//
// Default seen is 0xB8011001.
//
uint32_t ctar = SPI0_CTAR0;
//printf("SPI_CTAR0 = %8.8X\r\n", ctar);
ctar &= 0x7FFCFFF0; // 1/4 fSYS, 12.5Mhz
//printf("SPI_CTAR0 = %8.8X\r\n", ctar);
ctar |= 0x80000000; // 1/2 fSYS 25Mhz
//printf("SPI_CTAR0 = %8.8X\r\n", ctar);
uint32_t mcr = SPI0_MCR;
if (mcr & SPI_MCR_MDIS) {
SPI0_CTAR0 = ctar;
} else {
SPI0_MCR = mcr | SPI_MCR_MDIS | SPI_MCR_HALT;
SPI0_CTAR0 = ctar;
SPI0_MCR = mcr;
}
#endif
#endif
}
void serialEvent() {
@ -278,12 +367,14 @@ void serialEvent() {
}
}
#if defined(AVR)
ISR(TIMER3_COMPA_vect) {
if (millis() >= LEDnext_time) {
LEDnext_time = millis() + 30;
// set the brightness of LED
analogWrite(LED, brightness);
analogWrite(LED_BUILTIN, brightness);
// change the brightness for next time through the loop:
brightness = brightness + fadeAmount;
@ -299,6 +390,7 @@ ISR(TIMER3_COMPA_vect) {
}
}
}
#endif
bool isfat(uint8_t t) {
return (t == 0x01 || t == 0x04 || t == 0x06 || t == 0x0b || t == 0x0c || t == 0x0e || t == 0x1);
@ -312,6 +404,7 @@ void die(FRESULT rc) {
void loop() {
FIL My_File_Object_x; /* File object */
#if defined(AVR)
// Print a heap status report about every 10 seconds.
if (millis() >= HEAPnext_time) {
if (UsbDEBUGlvl > 0x50) {
@ -319,7 +412,11 @@ void loop() {
}
HEAPnext_time = millis() + 10000;
}
TCCR3B = 0;
#else
// Arm suffers here, oh well...
serialEvent();
#endif
// Horrid! This sort of thing really belongs in an ISR, not here!
// We also will be needing to test each hub port, we don't do this yet!
if (!change && !usbon && millis() >= usbon_time) {
@ -342,11 +439,15 @@ void loop() {
if (current_state != last_state) {
if (UsbDEBUGlvl > 0x50)
printf_P(PSTR("USB state = %x\r\n"), current_state);
#if defined(AVR)
if (current_state == USB_STATE_RUNNING) {
fadeAmount = 30;
}
#endif
if (current_state == USB_DETACHED_SUBSTATE_WAIT_FOR_DEVICE) {
#if defined(AVR)
fadeAmount = 80;
#endif
partsready = false;
for (int i = 0; i < cpart; i++) {
if (Fats[i] != NULL)
@ -365,10 +466,10 @@ void loop() {
if (partsready && !fatready) {
if (cpart > 0) fatready = true;
}
// This is horrible, and needs to be moved elsewhere!
for (int B = 0; B < MAX_USB_MS_DRIVERS; B++) {
if (!partsready && Bulk[B]->GetAddress() != NULL) {
if (!partsready && (Bulk[B]->GetAddress() != NULL)) {
// Build a list.
int ML = Bulk[B]->GetbMaxLUN();
//printf("MAXLUN = %i\r\n", ML);
@ -376,8 +477,8 @@ void loop() {
for (int i = 0; i < ML; i++) {
if (Bulk[B]->LUNIsGood(i)) {
partsready = true;
((pvt_t *)sto[i].private_data)->lun = i;
((pvt_t *)sto[i].private_data)->B = B;
((pvt_t *)(sto[i].private_data))->lun = i;
((pvt_t *)(sto[i].private_data))->B = B;
sto[i].Read = *PRead;
sto[i].Write = *PWrite;
sto[i].Reads = *PReads;
@ -440,7 +541,9 @@ void loop() {
p = ((struct Pvt *)(Fats[0]->storage->private_data));
if (!Bulk[p->B]->LUNIsGood(p->lun)) {
// media change
#if defined(AVR)
fadeAmount = 80;
#endif
partsready = false;
for (int i = 0; i < cpart; i++) {
if (Fats[i] != NULL)
@ -459,11 +562,13 @@ void loop() {
UINT bw, br, i;
if (!notified) {
#if defined(AVR)
fadeAmount = 5;
#endif
notified = true;
printf_P(PSTR("\r\nOpen an existing file (message.txt).\r\n"));
rc = f_open(&My_File_Object_x, "0:/MESSAGE.TXT", FA_READ);
if (rc) printf_P(PSTR("Error %i, message.txt not found.\r\n"));
if (rc) printf_P(PSTR("Error %i, message.txt not found.\r\n"), rc);
else {
printf_P(PSTR("\r\nType the file content.\r\n"));
for (;;) {
@ -522,7 +627,9 @@ outdir:
}
printf_P(PSTR("\r\nDirectory listing...\r\n"));
#if defined(AVR)
printf_P(PSTR("Available heap: %u Bytes\r\n"), freeHeap());
#endif
for (;;) {
#if _USE_LFN
My_File_Info_Object_x.lfsize = _MAX_LFN;
@ -583,7 +690,9 @@ out:
rc = f_open(&My_File_Object_x, "0:/10MB.bin", FA_WRITE | FA_CREATE_ALWAYS);
if (rc) goto failed;
for (bw = 0; bw < mbxs; bw++) My_Buff_x[bw] = bw & 0xff;
fflush(stdout);
start = millis();
while (start == millis());
for (ii = 10485760LU / mbxs; ii > 0LU; ii--) {
rc = f_write(&My_File_Object_x, My_Buff_x, mbxs, &bw);
if (rc || !bw) goto failed;
@ -591,10 +700,12 @@ out:
rc = f_close(&My_File_Object_x);
if (rc) goto failed;
end = millis();
wt = end - start;
wt = (end - start) - 1;
printf_P(PSTR("Time to write 10485760 bytes: %lu ms (%lu sec) \r\n"), wt, (500 + wt) / 1000UL);
rc = f_open(&My_File_Object_x, "0:/10MB.bin", FA_READ);
fflush(stdout);
start = millis();
while (start == millis());
if (rc) goto failed;
for (;;) {
rc = f_read(&My_File_Object_x, My_Buff_x, mbxs, &bw); /* Read a chunk of file */
@ -604,7 +715,7 @@ out:
if (rc) goto failed;
rc = f_close(&My_File_Object_x);
if (rc) goto failed;
rt = end - start;
rt = (end - start) - 1;
printf_P(PSTR("Time to read 10485760 bytes: %lu ms (%lu sec)\r\nDelete test file\r\n"), rt, (500 + rt) / 1000UL);
failed:
if (rc) die(rc);
@ -613,3 +724,4 @@ failed:
}
}
}

2
examples/testusbhostFAT/xmem2

@ -1 +1 @@
Subproject commit 16374f681b31d411661b7bd9ff5e578b2dff6843
Subproject commit 9fe733d35304dec1ebe750f5f13f868def2fcfe4

3
keywords.txt
View file

@ -34,7 +34,10 @@ PS3USB KEYWORD1
# Methods and Functions (KEYWORD2)
####################################################
setBdaddr KEYWORD2
getBdaddr KEYWORD2
setMoveBdaddr KEYWORD2
getMoveBdaddr KEYWORD2
getMoveCalibration KEYWORD2
getButtonPress KEYWORD2
getButtonClick KEYWORD2