#include <inttypes.h>
#include <avr/pgmspace.h>
#include "avrpins.h"
#include "max3421e.h"
#include "usbhost.h"
#include "usb_ch9.h"
#include "Usb.h"
#include "Arduino.h"
#include "printhex.h"
#include "hexdump.h"
#include "message.h"
#include "confdescparser.h"
Go to the source code of this file.
| #define bmREQ_FTDI_OUT 0x40 |
| #define bmREQ_FTDI_IN 0xc0 |
| #define FTDI_SIO_RESET 0 /* Reset the port */ |
| #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ |
| #define FTDI_SIO_SET_FLOW_CTRL 2 /* Set flow control register */ |
| #define FTDI_SIO_SET_BAUD_RATE 3 /* Set baud rate */ |
| #define FTDI_SIO_SET_DATA 4 /* Set the data characteristics of the port */ |
| #define FTDI_SIO_GET_MODEM_STATUS 5 /* Retrieve current value of modem status register */ |
| #define FTDI_SIO_SET_EVENT_CHAR 6 /* Set the event character */ |
| #define FTDI_SIO_SET_ERROR_CHAR 7 /* Set the error character */ |
| #define FTDI_SIO_RESET_SIO 0 |
| #define FTDI_SIO_RESET_PURGE_RX 1 |
| #define FTDI_SIO_RESET_PURGE_TX 2 |
| #define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8 ) |
| #define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8 ) |
| #define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8 ) |
| #define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8 ) |
| #define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8 ) |
| #define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11) |
| #define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11) |
| #define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11) |
| #define FTDI_SIO_SET_BREAK (0x1 << 14) |
| #define FTDI_SIO_SET_DTR_MASK 0x1 |
| #define FTDI_SIO_SET_RTS_MASK 0x2 |
| #define FTDI_SIO_DISABLE_FLOW_CTRL 0x0 |
| #define FTDI_SIO_RTS_CTS_HS (0x1 << 8) |
| #define FTDI_SIO_DTR_DSR_HS (0x2 << 8) |
| #define FTDI_SIO_XON_XOFF_HS (0x4 << 8) |
| #define FTDI_SIO_CTS_MASK 0x10 |
| #define FTDI_SIO_DSR_MASK 0x20 |
| #define FTDI_SIO_RI_MASK 0x40 |
| #define FTDI_SIO_RLSD_MASK 0x80 |
| #define FTDI_MAX_ENDPOINTS 3 |
1.8.4