#include <PS3BT.h>

Inheritance diagram for PS3BT:

Collaboration diagram for PS3BT:

Public Member Functions
	PS3BT (BTD *pBtd, uint8_t btadr5=0, uint8_t btadr4=0, uint8_t btadr3=0, uint8_t btadr2=0, uint8_t btadr1=0, uint8_t btadr0=0)

PS3 Controller functions
bool	getButtonPress (ButtonEnum b)

bool	getButtonClick (ButtonEnum b)

uint8_t	getAnalogButton (ButtonEnum a)

uint8_t	getAnalogHat (AnalogHatEnum a)

int16_t	getSensor (SensorEnum a)

float	getAngle (AngleEnum a)

float	get9DOFValues (SensorEnum a)

bool	getStatus (StatusEnum c)

void	printStatusString ()

String	getTemperature ()

void	setAllOff ()

void	setRumbleOff ()

void	setRumbleOn (RumbleEnum mode)

void	setRumbleOn (uint8_t rightDuration, uint8_t rightPower, uint8_t leftDuration, uint8_t leftPower)

void	setLedRaw (uint8_t value)

void	setLedOff ()

void	setLedOff (LEDEnum a)

void	setLedOn (LEDEnum a)

void	setLedToggle (LEDEnum a)

void	moveSetBulb (uint8_t r, uint8_t g, uint8_t b)

void	moveSetBulb (ColorsEnum color)

void	moveSetRumble (uint8_t rumble)

uint32_t	getLastMessageTime ()

Public Member Functions inherited from BluetoothService
	BluetoothService (BTD *p)

void	attachOnInit (void(*funcOnInit)(void))

Public Attributes
bool	PS3Connected

bool	PS3MoveConnected

bool	PS3NavigationConnected

BluetoothService implementation
void	disconnect ()

void	ACLData (uint8_t *ACLData)

void	Run ()

void	Reset ()

void	onInit ()

Additional Inherited Members
Protected Member Functions inherited from BluetoothService
bool	checkHciHandle (uint8_t *buf, uint16_t handle)

Protected Attributes inherited from BluetoothService
void(*	pFuncOnInit )(void)

BTD *	pBtd

uint16_t	hci_handle

uint32_t	l2cap_event_flag

uint8_t	identifier

Detailed Description

This BluetoothService class implements support for all the official PS3 Controllers: Dualshock 3, Navigation or a Motion controller via Bluetooth.

Information about the protocol can be found at the wiki: https://github.com/felis/USB_Host_Shield_2.0/wiki/PS3-Information.

Definition at line 32 of file PS3BT.h.

Constructor & Destructor Documentation

PS3BT::PS3BT	(	BTD *	pBtd,
		uint8_t	btadr5 = `0`,
		uint8_t	btadr4 = `0`,
		uint8_t	btadr3 = `0`,
		uint8_t	btadr2 = `0`,
		uint8_t	btadr1 = `0`,
		uint8_t	btadr0 = `0`
	)

Constructor for the PS3BT class.

Parameters

pBtd	Pointer to BTD class instance.
btadr5,btadr4,btadr3,btadr2,btadr1,btadr0	Pass your dongles Bluetooth address into the constructor, This will set BTD::my_bdaddr, so you don't have to plug in the dongle before pairing with your controller.

Definition at line 23 of file PS3BT.cpp.

Member Function Documentation

void PS3BT::disconnect ( )

virtual

Used this to disconnect any of the controllers.

Implements BluetoothService.

Definition at line 217 of file PS3BT.cpp.

bool PS3BT::getButtonPress ( ButtonEnum b )

getButtonPress(ButtonEnum b) will return true as long as the button is held down.

While getButtonClick(ButtonEnum b) will only return it once.

So you instance if you need to increase a variable once you would use getButtonClick(ButtonEnum b), but if you need to drive a robot forward you would use getButtonPress(ButtonEnum b).

Parameters

b	ButtonEnum to read.

Returns: getButtonPress(ButtonEnum b) will return a true as long as a button is held down, while getButtonClick(ButtonEnum b) will return true once for each button press.

Definition at line 49 of file PS3BT.cpp.

bool PS3BT::getButtonClick ( ButtonEnum b )

getButtonPress(ButtonEnum b) will return true as long as the button is held down.

While getButtonClick(ButtonEnum b) will only return it once.

So you instance if you need to increase a variable once you would use getButtonClick(ButtonEnum b), but if you need to drive a robot forward you would use getButtonPress(ButtonEnum b).

Parameters

b	ButtonEnum to read.

Returns: getButtonPress(ButtonEnum b) will return a true as long as a button is held down, while getButtonClick(ButtonEnum b) will return true once for each button press.

Definition at line 53 of file PS3BT.cpp.

uint8_t PS3BT::getAnalogButton ( ButtonEnum a )

Used to get the analog value from button presses.

Parameters

a	The ButtonEnum to read. The supported buttons are: UP, RIGHT, DOWN, LEFT, L1, L2, R1, R2, TRIANGLE, CIRCLE, CROSS, SQUARE, and T.

Returns: Analog value in the range of 0-255.

Definition at line 60 of file PS3BT.cpp.

uint8_t PS3BT::getAnalogHat ( AnalogHatEnum a )

Used to read the analog joystick.

Parameters

a	LeftHatX, LeftHatY, RightHatX, and RightHatY.

Returns: Return the analog value in the range of 0-255.

Definition at line 64 of file PS3BT.cpp.

int16_t PS3BT::getSensor ( SensorEnum a )

Used to read the sensors inside the Dualshock 3 and Move controller.

Parameters

a	The Dualshock 3 has a 3-axis accelerometer and a 1-axis gyro inside. The Move controller has a 3-axis accelerometer, a 3-axis gyro, a 3-axis magnetometer and a temperature sensor inside.

Returns: Return the raw sensor value.

Definition at line 68 of file PS3BT.cpp.

float PS3BT::getAngle ( AngleEnum a )

Use this to get Pitch and Roll calculated using the accelerometer.

Parameters

a	Either Pitch or Roll.

Returns: Return the angle in the range of 0-360.

Definition at line 85 of file PS3BT.cpp.

float PS3BT::get9DOFValues ( SensorEnum a )

Read the sensors inside the Move controller.

Parameters

a	aXmove, aYmove, aZmove, gXmove, gYmove, gZmove, mXmove, mYmove, and mXmove.

Returns: The value in SI units.

Definition at line 112 of file PS3BT.cpp.

bool PS3BT::getStatus ( StatusEnum c )

Get the status from the controller.

Parameters

c	The StatusEnum you want to read.

Returns: True if correct and false if not.

Definition at line 156 of file PS3BT.cpp.

void PS3BT::printStatusString ( )

Read all the available statuses from the controller and prints it as a nice formated string.

Definition at line 160 of file PS3BT.cpp.

String PS3BT::getTemperature ( )

Read the temperature from the Move controller.

Returns: The temperature in degrees Celsius.

Definition at line 141 of file PS3BT.cpp.

void PS3BT::setAllOff ( )

Used to set all LEDs and rumble off.

Definition at line 519 of file PS3BT.cpp.

void PS3BT::setRumbleOff ( )

Turn off rumble.

Definition at line 530 of file PS3BT.cpp.

void PS3BT::setRumbleOn ( RumbleEnum mode )

Turn on rumble.

Parameters

mode	Either RumbleHigh or RumbleLow.

Definition at line 540 of file PS3BT.cpp.

void PS3BT::setRumbleOn	(	uint8_t	rightDuration,
		uint8_t	rightPower,
		uint8_t	leftDuration,
		uint8_t	leftPower
	)

Turn on rumble using custom duration and power.

Parameters

rightDuration	The duration of the right/low rumble effect.
rightPower	The intensity of the right/low rumble effect.
leftDuration	The duration of the left/high rumble effect.
leftPower	The intensity of the left/high rumble effect.

Definition at line 549 of file PS3BT.cpp.

void PS3BT::setLedRaw ( uint8_t value )

Set LED value without using LEDEnum.

Parameters

value See: LEDEnum.

Definition at line 559 of file PS3BT.cpp.

void PS3BT::setLedOff ( )

inline

Turn all LEDs off.

Definition at line 138 of file PS3BT.h.

void PS3BT::setLedOff ( LEDEnum a )

Turn the specific LED off.

Parameters

a	The LEDEnum to turn off.

Definition at line 564 of file PS3BT.cpp.

void PS3BT::setLedOn ( LEDEnum a )

Turn the specific LED on.

Parameters

a	The LEDEnum to turn on.

Definition at line 569 of file PS3BT.cpp.

void PS3BT::setLedToggle ( LEDEnum a )

Toggle the specific LED.

Parameters

a	The LEDEnum to toggle.

Definition at line 578 of file PS3BT.cpp.

void PS3BT::moveSetBulb	(	uint8_t	r,
		uint8_t	g,
		uint8_t	b
	)

Use this to set the Color using RGB values.

Parameters

r,g,b RGB value.

Definition at line 604 of file PS3BT.cpp.

void PS3BT::moveSetBulb ( ColorsEnum color )

Use this to set the color using the predefined colors in ColorsEnum.

Parameters

color The desired color.

Definition at line 613 of file PS3BT.cpp.

void PS3BT::moveSetRumble ( uint8_t rumble )

Set the rumble value inside the Move controller.

Parameters

rumble The desired value in the range from 64-255.

Definition at line 617 of file PS3BT.cpp.

uint32_t PS3BT::getLastMessageTime ( )

inline

Used to get the millis() of the last message

Definition at line 174 of file PS3BT.h.

void PS3BT::ACLData ( uint8_t * ACLData )

protectedvirtual

Used to pass acldata to the services.

Parameters

ACLData Incoming acldata.

Implements BluetoothService.

Definition at line 224 of file PS3BT.cpp.

void PS3BT::Run ( )

protectedvirtual

Used to run part of the state machine.

Implements BluetoothService.

Definition at line 454 of file PS3BT.cpp.

void PS3BT::Reset ( )

protectedvirtual

Use this to reset the service.

Implements BluetoothService.

Definition at line 204 of file PS3BT.cpp.

void PS3BT::onInit ( )

protectedvirtual

Called when the controller is successfully initialized. Use attachOnInit(void (*funcOnInit)(void)) to call your own function. This is useful for instance if you want to set the LEDs in a specific way.

Implements BluetoothService.

Definition at line 628 of file PS3BT.cpp.

Member Data Documentation

bool PS3BT::PS3Connected

Variable used to indicate if the normal Playstation controller is successfully connected.

Definition at line 176 of file PS3BT.h.

bool PS3BT::PS3MoveConnected

Variable used to indicate if the Move controller is successfully connected.

Definition at line 182 of file PS3BT.h.

bool PS3BT::PS3NavigationConnected

Variable used to indicate if the Navigation controller is successfully connected.

Definition at line 184 of file PS3BT.h.

The documentation for this class was generated from the following files:

Public Member Functions

Public Attributes

BluetoothService implementation

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation