#include <PS3BT.h>

Inheritance diagram for PS3BT:

Collaboration diagram for PS3BT:

Public Member Functions
	PS3BT (BTD *pBtd, uint8_t btadr5=0, uint8_t btadr4=0, uint8_t btadr3=0, uint8_t btadr2=0, uint8_t btadr1=0, uint8_t btadr0=0)

BluetoothService implementation
virtual void	ACLData (uint8_t *ACLData)

virtual void	Run ()

virtual void	Reset ()

virtual void	disconnect ()

PS3 Controller functions
bool	getButtonPress (Button b)

bool	getButtonClick (Button b)

uint8_t	getAnalogButton (Button a)

uint8_t	getAnalogHat (AnalogHat a)

int16_t	getSensor (Sensor a)

double	getAngle (Angle a)

double	get9DOFValues (Sensor a)

bool	getStatus (Status c)

String	getStatusString ()

String	getTemperature ()

void	setAllOff ()

void	setRumbleOff ()

void	setRumbleOn (Rumble mode)

void	setLedOff (LED a)

void	setLedOn (LED a)

void	setLedToggle (LED a)

void	moveSetBulb (uint8_t r, uint8_t g, uint8_t b)

void	moveSetBulb (Colors color)

void	moveSetRumble (uint8_t rumble)

Public Attributes
bool	PS3Connected

bool	PS3MoveConnected

bool	PS3NavigationConnected

Detailed Description

This BluetoothService class implements support for all the official PS3 Controllers: Dualshock 3, Navigation or a Motion controller via Bluetooth.

Information about the protocol can be found at the wiki: https://github.com/felis/USB_Host_Shield_2.0/wiki/PS3-Information.

Definition at line 66 of file PS3BT.h.

Constructor & Destructor Documentation

PS3BT::PS3BT	(	BTD *	pBtd,
		uint8_t	btadr5 = `0`,
		uint8_t	btadr4 = `0`,
		uint8_t	btadr3 = `0`,
		uint8_t	btadr2 = `0`,
		uint8_t	btadr1 = `0`,
		uint8_t	btadr0 = `0`
	)

Constructor for the PS3BT class.

Parameters

pBtd	Pointer to BTD class instance.
btadr5,btadr4,btadr3,btadr2,btadr1,btadr0	Pass your dongles Bluetooth address into the constructor, This will set BTD::my_bdaddr, so you don't have to plug in the dongle before pairing with your controller.

Definition at line 35 of file PS3BT.cpp.

Member Function Documentation

void PS3BT::ACLData ( uint8_t * ACLData )

virtual

Used to pass acldata to the services.

Parameters

ACLData Incoming acldata.

Reimplemented from BluetoothService.

Definition at line 247 of file PS3BT.cpp.

void PS3BT::disconnect ( )

virtual

Used this to disconnect any of the controllers.

Reimplemented from BluetoothService.

Definition at line 240 of file PS3BT.cpp.

double PS3BT::get9DOFValues ( Sensor a )

Read the sensors inside the Move controller.

Parameters

a	aXmove, aYmove, aZmove, gXmove, gYmove, gZmove, mXmove, mYmove, and mXmove.

Returns: The value in SI units.

Definition at line 130 of file PS3BT.cpp.

uint8_t PS3BT::getAnalogButton ( Button a )

Used to get the analog value from button presses.

Parameters

a	The Button to read. The supported buttons are: UP, RIGHT, DOWN, LEFT, L1, L2, R1, R2, TRIANGLE, CIRCLE, CROSS, SQUARE, and T.

Returns: Analog value in the range of 0-255.

Definition at line 72 of file PS3BT.cpp.

uint8_t PS3BT::getAnalogHat ( AnalogHat a )

Used to read the analog joystick.

Parameters

a	LeftHatX, LeftHatY, RightHatX, and RightHatY.

Returns: Return the analog value in the range of 0-255.

Definition at line 77 of file PS3BT.cpp.

double PS3BT::getAngle ( Angle a )

Use this to get Pitch and Roll calculated using the accelerometer.

Parameters

a	Either Pitch or Roll.

Returns: Return the angle in the range of 0-360.

Definition at line 100 of file PS3BT.cpp.

bool PS3BT::getButtonClick ( Button b )

getButtonPress(Button b) will return true as long as the button is held down While getButtonClick(Button b) will only return it once So you instance if you need to increase a variable once you would use getButtonClick(Button b), but if you need to drive a robot forward you would use getButtonPress(Button b).

Definition at line 66 of file PS3BT.cpp.

bool PS3BT::getButtonPress ( Button b )

getButtonPress(Button b) will return true as long as the button is held down While getButtonClick(Button b) will only return it once So you instance if you need to increase a variable once you would use getButtonClick(Button b), but if you need to drive a robot forward you would use getButtonPress(Button b).

Definition at line 63 of file PS3BT.cpp.

int16_t PS3BT::getSensor ( Sensor a )

Used to read the sensors inside the Dualshock 3 and Move controller.

Parameters

a	The Dualshock 3 has a 3-axis accelerometer and a 1-axis gyro inside. The Move controller has a 3-axis accelerometer, a 3-axis gyro, a 3-axis magnetometer and a temperature sensor inside.

Returns: Return the raw sensor value.

Definition at line 82 of file PS3BT.cpp.

bool PS3BT::getStatus ( Status c )

Get the Status from the controller.

Parameters

c	The Status you want to read.

Returns: True if correct and false if not.

Definition at line 171 of file PS3BT.cpp.

String PS3BT::getStatusString ( )

Read all the available Status from the controller.

Returns: One large string with all the information.

Definition at line 178 of file PS3BT.cpp.

String PS3BT::getTemperature ( )

Read the temperature from the Move controller.

Returns: The temperature in degrees celsius.

Definition at line 158 of file PS3BT.cpp.

void PS3BT::moveSetBulb	(	uint8_t	r,
		uint8_t	g,
		uint8_t	b
	)

Use this to set the Color using RGB values.

Parameters

r,g,b RGB value.

Definition at line 637 of file PS3BT.cpp.

void PS3BT::moveSetBulb ( Colors color )

Use this to set the color using the predefined colors in Colors.

Parameters

color The desired color.

Definition at line 645 of file PS3BT.cpp.

void PS3BT::moveSetRumble ( uint8_t rumble )

Set the rumble value inside the Move controller.

Parameters

rumble The desired value in the range from 64-255.

Definition at line 648 of file PS3BT.cpp.

void PS3BT::Reset ( )

virtual

Use this to reset the service.

Reimplemented from BluetoothService.

Definition at line 227 of file PS3BT.cpp.

void PS3BT::Run ( )

virtual

Used to run part of the state maschine.

Reimplemented from BluetoothService.

Definition at line 506 of file PS3BT.cpp.

void PS3BT::setAllOff ( )

Used to set all LEDs and Rumble off.

Definition at line 571 of file PS3BT.cpp.

void PS3BT::setLedOff ( LED a )

Turn the specific LED off.

Parameters

a	The LED to turn off.

Definition at line 606 of file PS3BT.cpp.

void PS3BT::setLedOn ( LED a )

Turn the specific LED on.

Parameters

a	The LED to turn on.

Definition at line 610 of file PS3BT.cpp.

void PS3BT::setLedToggle ( LED a )

Toggle the specific LED.

Parameters

a	The LED to toggle.

Definition at line 614 of file PS3BT.cpp.

void PS3BT::setRumbleOff ( )

Turn off Rumble.

Definition at line 577 of file PS3BT.cpp.

void PS3BT::setRumbleOn ( Rumble mode )

Turn on Rumble.

Parameters

mode	Either RumbleHigh or RumbleLow.

Definition at line 585 of file PS3BT.cpp.

Member Data Documentation

bool PS3BT::PS3Connected

Variable used to indicate if the normal playstation controller is successfully connected.

Definition at line 198 of file PS3BT.h.

bool PS3BT::PS3MoveConnected

Variable used to indicate if the move controller is successfully connected.

Definition at line 200 of file PS3BT.h.

bool PS3BT::PS3NavigationConnected

Variable used to indicate if the navigation controller is successfully connected.

Definition at line 202 of file PS3BT.h.

The documentation for this class was generated from the following files:

Public Member Functions

Public Attributes

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation