cdcprolific.h File Reference

#include <inttypes.h>
#include <avr/pgmspace.h>
#include "avrpins.h"
#include "max3421e.h"
#include "usbhost.h"
#include "usb_ch9.h"
#include "Usb.h"
#include <WProgram.h>
#include "printhex.h"
#include "hexdump.h"
#include "message.h"
#include "confdescparser.h"
#include "cdcacm.h"

Include dependency graph for cdcprolific.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Classes
class	PL2303

Macros
#define	PL_VID   0x067B
#define	PL_PID   ( 0x2303 || 0x0609 )
#define	PROLIFIC_REV_H   0x0202
#define	PROLIFIC_REV_X   0x0300
#define	PROLIFIC_REV_HX_CHIP_D   0x0400
#define	PROLIFIC_REV_1   0x0001
#define	kXOnChar   '\x11'
#define	kXOffChar   '\x13'
#define	SPECIAL_SHIFT   (5)
#define	SPECIAL_MASK   ((1<<SPECIAL_SHIFT) - 1)
#define	STATE_ALL   ( PD_RS232_S_MASK | PD_S_MASK )
#define	FLOW_RX_AUTO   ( PD_RS232_A_RFR | PD_RS232_A_DTR | PD_RS232_A_RXO )
#define	FLOW_TX_AUTO   ( PD_RS232_A_CTS | PD_RS232_A_DSR | PD_RS232_A_TXO | PD_RS232_A_DCD )
#define	CAN_BE_AUTO   ( FLOW_RX_AUTO | FLOW_TX_AUTO )
#define	CAN_NOTIFY   ( PD_RS232_N_MASK )
#define	EXTERNAL_MASK   ( PD_S_MASK | (PD_RS232_S_MASK & ~PD_RS232_S_LOOP) )
#define	INTERNAL_DELAY   ( PD_RS232_S_LOOP )
#define	DEFAULT_AUTO   ( PD_RS232_A_DTR | PD_RS232_A_RFR | PD_RS232_A_CTS | PD_RS232_A_DSR )
#define	DEFAULT_NOTIFY   0x00
#define	DEFAULT_STATE   ( PD_S_TX_ENABLE | PD_S_RX_ENABLE | PD_RS232_A_TXO | PD_RS232_A_RXO )
#define	CONTINUE_SEND   1
#define	PAUSE_SEND   2
#define	kRxAutoFlow   ((UInt32)( PD_RS232_A_RFR | PD_RS232_A_DTR | PD_RS232_A_RXO ))
#define	kTxAutoFlow   ((UInt32)( PD_RS232_A_CTS | PD_RS232_A_DSR | PD_RS232_A_TXO | PD_RS232_A_DCD ))
#define	kControl_StateMask   ((UInt32)( PD_RS232_S_CTS | PD_RS232_S_DSR | PD_RS232_S_CAR | PD_RS232_S_RI ))
#define	kRxQueueState   ((UInt32)( PD_S_RXQ_EMPTY | PD_S_RXQ_LOW_WATER | PD_S_RXQ_HIGH_WATER | PD_S_RXQ_FULL ))
#define	kTxQueueState   ((UInt32)( PD_S_TXQ_EMPTY | PD_S_TXQ_LOW_WATER | PD_S_TXQ_HIGH_WATER | PD_S_TXQ_FULL ))
#define	kCONTROL_DTR   0x01
#define	kCONTROL_RTS   0x02
#define	kStateTransientMask   0x74
#define	kBreakError   0x04
#define	kFrameError   0x10
#define	kParityError   0x20
#define	kOverrunError   0x40
#define	kCTS   0x80
#define	kDSR   0x02
#define	kRI   0x08
#define	kDCD   0x01
#define	kHandshakeInMask   ((UInt32)( PD_RS232_S_CTS | PD_RS232_S_DSR | PD_RS232_S_CAR | PD_RS232_S_RI ))
#define	VENDOR_WRITE_REQUEST_TYPE   0x40
#define	VENDOR_WRITE_REQUEST   0x01
#define	VENDOR_READ_REQUEST_TYPE   0xc0
#define	VENDOR_READ_REQUEST   0x01
#define	SET_DCR0   0x00
#define	GET_DCR0   0x80
#define	DCR0_INIT   0x01
#define	DCR0_INIT_H   0x41
#define	DCR0_INIT_X   0x61
#define	SET_DCR1   0x01
#define	GET_DCR1   0x81
#define	DCR1_INIT_H   0x80
#define	DCR1_INIT_X   0x00
#define	SET_DCR2   0x02
#define	GET_DCR2   0x82
#define	DCR2_INIT_H   0x24
#define	DCR2_INIT_X   0x44
#define	RESET_DOWNSTREAM_DATA_PIPE   0x08
#define	RESET_UPSTREAM_DATA_PIPE   0x09
#define	PL_MAX_ENDPOINTS   4

Enumerations
enum	tXO_State {   kXOnSent = -2, kXOffSent = -1, kXO_Idle = 0, kXOffNeeded = 1,   kXOnNeeded = 2 }
enum	pl2303_type {   unknown, type_0, type_1, rev_X,   rev_HX, rev_H }

Macro Definition Documentation

#define CAN_BE_AUTO   ( FLOW_RX_AUTO | FLOW_TX_AUTO )

#define CAN_NOTIFY   ( PD_RS232_N_MASK )

#define CONTINUE_SEND   1

#define DCR0_INIT   0x01

#define DCR0_INIT_H   0x41

#define DCR0_INIT_X   0x61

#define DCR1_INIT_H   0x80

#define DCR1_INIT_X   0x00

#define DCR2_INIT_H   0x24

#define DCR2_INIT_X   0x44

#define DEFAULT_AUTO   ( PD_RS232_A_DTR | PD_RS232_A_RFR | PD_RS232_A_CTS | PD_RS232_A_DSR )

#define DEFAULT_NOTIFY   0x00

#define DEFAULT_STATE   ( PD_S_TX_ENABLE | PD_S_RX_ENABLE | PD_RS232_A_TXO | PD_RS232_A_RXO )

#define EXTERNAL_MASK   ( PD_S_MASK | (PD_RS232_S_MASK & ~PD_RS232_S_LOOP) )

#define FLOW_RX_AUTO   ( PD_RS232_A_RFR | PD_RS232_A_DTR | PD_RS232_A_RXO )

#define FLOW_TX_AUTO   ( PD_RS232_A_CTS | PD_RS232_A_DSR | PD_RS232_A_TXO | PD_RS232_A_DCD )

#define GET_DCR0   0x80

#define GET_DCR1   0x81

#define GET_DCR2   0x82

#define INTERNAL_DELAY   ( PD_RS232_S_LOOP )

#define kBreakError   0x04

#define kCONTROL_DTR   0x01

#define kCONTROL_RTS   0x02

#define kControl_StateMask   ((UInt32)( PD_RS232_S_CTS | PD_RS232_S_DSR | PD_RS232_S_CAR | PD_RS232_S_RI ))

#define kCTS   0x80

#define kDCD   0x01

#define kDSR   0x02

#define kFrameError   0x10

#define kHandshakeInMask   ((UInt32)( PD_RS232_S_CTS | PD_RS232_S_DSR | PD_RS232_S_CAR | PD_RS232_S_RI ))

#define kOverrunError   0x40

#define kParityError   0x20

#define kRI   0x08

#define kRxAutoFlow   ((UInt32)( PD_RS232_A_RFR | PD_RS232_A_DTR | PD_RS232_A_RXO ))

#define kRxQueueState   ((UInt32)( PD_S_RXQ_EMPTY | PD_S_RXQ_LOW_WATER | PD_S_RXQ_HIGH_WATER | PD_S_RXQ_FULL ))

#define kStateTransientMask   0x74

#define kTxAutoFlow   ((UInt32)( PD_RS232_A_CTS | PD_RS232_A_DSR | PD_RS232_A_TXO | PD_RS232_A_DCD ))

#define kTxQueueState   ((UInt32)( PD_S_TXQ_EMPTY | PD_S_TXQ_LOW_WATER | PD_S_TXQ_HIGH_WATER | PD_S_TXQ_FULL ))

#define kXOffChar   '\x13'

#define kXOnChar   '\x11'

#define PAUSE_SEND   2

#define PL_MAX_ENDPOINTS   4

#define PL_PID   ( 0x2303 || 0x0609 )

#define PL_VID   0x067B

#define PROLIFIC_REV_1   0x0001

#define PROLIFIC_REV_H   0x0202

#define PROLIFIC_REV_HX_CHIP_D   0x0400

#define PROLIFIC_REV_X   0x0300

#define RESET_DOWNSTREAM_DATA_PIPE   0x08

#define RESET_UPSTREAM_DATA_PIPE   0x09

#define SET_DCR0   0x00

#define SET_DCR1   0x01

#define SET_DCR2   0x02

#define SPECIAL_MASK   ((1<<SPECIAL_SHIFT) - 1)

#define SPECIAL_SHIFT   (5)

#define STATE_ALL   ( PD_RS232_S_MASK | PD_S_MASK )

#define VENDOR_READ_REQUEST   0x01

#define VENDOR_READ_REQUEST_TYPE   0xc0

#define VENDOR_WRITE_REQUEST   0x01

#define VENDOR_WRITE_REQUEST_TYPE   0x40

Enumeration Type Documentation

enum pl2303_type

Enumerator
unknown
type_0
type_1
rev_X
rev_HX
rev_H

enum tXO_State

Enumerator
kXOnSent
kXOffSent
kXO_Idle
kXOffNeeded
kXOnNeeded