specchioriflesso/USB_Host_Shield_2.0
1
Fork 0
mirror of https://github.com/felis/USB_Host_Shield_2.0.git synced 2024-03-22 11:31:26 +01:00
Code Issues Projects Releases Packages Wiki Activity
USB_Host_Shield_2.0/WiiCameraReadme.md
Kristian Sloth Lauszus eb088895f5 Added support for the IR Camera inside the Wiimote 
Thanks to Allan Glover: https://github.com/Engr-AllanG
2013-01-17 00:07:56 +01:00

1.1 KiB
Raw Blame History

Please see http://wiibrew.org/wiki/Wiimote#IR_Camera for the complete capabilities of the Wii camera. The IR camera code was written based on the above website and with support from Kristian Lauszus.

Must omit the "." in the name of the USB_Host_Shiled_2.0 library folder when inserting into the Arudino library folder.

This library is large, if you run into memory problems when uploading to the arduino, comment out the #define DEBUG in the BTD.cpp and Wii.cpp files.

To enable the IR camera code, uncomment #define WIICAMERA in Wii.h.

This library impliments the following settings:

  • Report sensitivity mode: 00 00 00 00 00 00 90 00 41 40 00 Suggested by inio (high sensitivity)
  • Data Format: Extended mode (0x03). Full mode is not working yet. The output reports 0x3e and 0x3f need tampering with
    • In this mode the camera outputs x and y corridinates and a size dimension for the 4 brightest points.

CURRENTLY, CODE IS ONLY WRITTEN FOR THE 2 BRIGHTEST POINTS

Again, read through http://wiibrew.org/wiki/Wiimote#IR_Camera to get an understanding of the camera and its settings.